aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390/cio/cio.c
AgeCommit message (Collapse)Author
2007-10-12[S390] cio: Disable channel measurements (cmf) on shutdown/reboot.Cornelia Huck
Disable channel measurements for all ccw devices via the ccw bus's shutdown method. Clear residual cmf related information that may be in the schib when setting up a new subchannel. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: Clean up messages.Cornelia Huck
- Remove unneeded messages. - Move some messages into the debug feature. - Use dev_* where appropriate. - Use "cio: " prefix consistently. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: Channel-path configure function.Peter Oberparleiter
Add a new attribute to the channel-path sysfs directory through which channel-path configure operations can be triggered. Also listen for hardware events requesting channel-path configure operations and process them accordingly. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] cio: Introduce separate files for channel-path related code.Peter Oberparleiter
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] cio: Introduce struct chp_id.Peter Oberparleiter
Introduce data type for channel-path IDs. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] cio/ipl: Clean interface between cio and ipl code.Heiko Carstens
Clean interface between cio and ipl code, so Peter stops complaining. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-02-21[S390] nss: Free unused memory in kernel image.Heiko Carstens
With CONFIG_SHARED_KERNEL the kernel text segment that might be in a read only memory sections starts at 1MB. Memory between 0x12000 and 0x100000 is unused then. Free this, so we have appr. an extra MB of memory available. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-21[S390] New header file ipl.hMichael Holzheu
Setup.h has been misused for ipl related stuff in the past. We now move everything, which has to do with ipl and reipl to a new header file named "ipl.h". Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05[S390] Avoid excessive inlining.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05[S390] Convert memory detection into C code.Heiko Carstens
Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05[S390] ETR support.Martin Schwidefsky
This patch adds support for clock synchronization to an external time reference (ETR). The external time reference sends an oscillator signal and a synchronization signal every 2^20 microseconds to keep the TOD clocks of all connected servers in sync. For availability two ETR units can be connected to a machine. If the clock deviates for more than the sync-check tolerance all cpus get a machine check that indicates that the clock is out of sync. For the lovely details how to get the clock back in sync see the code below. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05[S390] cio: Don't spam debug feature.Cornelia Huck
Lower priority of "Blacklisted device detected" messages so we don't overwrite more useful messages. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-01-09[S390] cio: use barrier() in stsch_reset.Heiko Carstens
Use barrier() in stsch_reset() instead of duplicating the stsch() inline assembly and adding "memory" to the clobberlist. Pointed out by Chuck Ebbert. Real fix would be to add a fixup section to the stsch() and extend the basic program check handler so it searches the exception tables in case of a program check. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-28[S390] cio: fix stsch_reset.Michael Holzheu
Copy inline assembly of stsch and add "memory" to clobber list in order to prevent gcc from optimizing away the checking of the global variable "pgm_check_occured". Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-15[S390] Fix reboot hang on LPARsMichael Holzheu
Reboot hangs on LPARs without diag308 support. The reason for this is, that before the reboot is done, the channel subsystem is shut down. During the reset on each possible subchannel a "store subchannel" is done. This operation can end in a program check interruption, if the specified subchannel set is not implemented by the hardware. During the reset, currently we do not have a program check handler, which leads to the described kernel bug. We install now a new program check handler for the reboot code to fix this problem. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-08[S390] Support for disconnected devices reappearing on another subchannel.Cornelia Huck
- create a 'pseudo_subchannel' per channel subsystem (the 'orphanage') - use the orphanage as a shelter for ccw_devices that can't remain on the same subchannel Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-08[S390] subchannel lock conversion.Cornelia Huck
Convert the subchannel lock to a pointer to a lock. Needed for the dynamic subchannel mapping patch. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-04[S390] Reset infrastructure for re-IPL.Heiko Carstens
In case of re-IPL and diag308 doesn't work we have to reset all devices manually and wait synchronously that each reset finished. This patch adds the necessary infrastucture and the first exploiter of it. Subsystems that need to add a function that needs to be called at re-IPL may register/unregister this function via struct reset_call { struct reset_call *next; void (*fn)(void); }; void register_reset_call(struct reset_call *reset); void unregister_reset_call(struct reset_call *reset); When the registered function get called the context is: - all cpus beside the current one are stopped - all machine checks and interrupts are disabled - prefixing is disabled - a default machine check handler is available for use The registered functions may not take any locks are sleep. For the common I/O layer part of this patch: Introduce a reset_call css_reset that does the following: - clear all subchannels - perform a rchp on all channel paths and wait for the resulting machine checks This replaces the calls to clear_all_subchannels() and cio_reset_channel_paths() for kexec and ccw reipl. reipl_ccw_dev() now uses reipl_find_schid() to determine the subchannel id for a given device id. Also remove cio_reset_channel_paths() and friends since they are not needed anymore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-11[S390] irq change improvements.Heiko Carstens
Remove the last few places where a pointer to pt_regs gets passed. Also make sure we call set_irq_regs() before irq_enter() and after irq_exit(). This doesn't fix anything but makes sure s390 looks the same like all other architectures. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-06[S390] irq change build fixes.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20[S390] cio: always query all paths on path verification.Peter Oberparleiter
Reappearing channel paths are sometimes not utilized by CCW devices because path verification incorrectly relies on path-operational-mask information which is not updated until a channel path has been used again. Modify path verification procedure to always query all available paths to a device. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20[S390] cio: update path groups on logical CHPID changes.Peter Oberparleiter
CHPIDs that are logically varied off will not be removed from a CCW device's path group because resign-from-pathgroup command is issued with invalid path mask of 0 because internal CCW operations are masked by the logical path mask after the relevant bits are cleared by the vary operation. Do not apply logical path mask to internal operations. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20[S390] convert some assembler to C.Heiko Carstens
Convert GET_IPL_DEVICE assembler macro to C function. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20[S390] ipl/dump on panic.Michael Holzheu
It is now possible to specify a ccw/fcp dump device which is used to automatically create a system dump in case of a kernel panic. The dump device can be configured under /sys/firmware/dump. In addition it is now possible to specify a ccw/fcp device which is used for the next reboot of Linux. The reipl device can be configured under /sys/firmware/reipl. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] Fix sparse warnings.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] path grouping and path verifications fixes.Cornelia Huck
1. Multipath devices for which SetPGID is not supported are not handled well. Use NOP ccws for path verification (sans path grouping) when SetPGID is not supported. 2. Check for PGIDs already set with SensePGID on _all_ paths (not just the first one) and try to find a common one. Moan if no common PGID can be found (and use NOP verification). If no PGIDs have been set, use the css global PGID (as before). (Rationale: SetPGID will get a command reject if the PGID it tries to set does not match the already set PGID.) 3. Immediately before reboot, issue RESET CHANNEL PATH (rcp) on all chpids. This will remove the old PGIDs. rcp will generate solicited CRWs which can be savely ignored by the machine check handler (all other actions create unsolicited CRWs). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] subchannel register/unregister mutex.Cornelia Huck
Add a reg_mutex to prevent unregistering a subchannel before it has been registered. Since 2.6.17, we've seen oopses in kslowcrw when a device is found to be not operational during sense id when doing initial device recognition; it is not clear yet why that particular problem was not (yet) observed with earlier kernels... Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-03[PATCH] lockdep: irqtrace subsystem, s390 supportHeiko Carstens
irqtrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-11[PATCH] s390: increase cio_trace debug event sizePeter Oberparleiter
Debugging events in cio_trace/hex_ascii are truncated for some trace entries. Increase trace event size to 16 bytes to cover longer text events, make CIO_HEX_EVENT an inline function that loops to cover bigger hex events. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] s390: Remove CVS generated informationHeiko Carstens
- Remove all CVS generated information like e.g. revision IDs from drivers/s390 and include/asm-s390 (none present in arch/s390). - Add newline at end of arch/s390/lib/Makefile to avoid diff message. Acked-by: Andreas Herrmann <aherrman@de.ibm.com> Acked-by: Frank Pavlic <pavlic@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] s390: email-address changeCornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] s390: cleanup KconfigMartin Schwidefsky
Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] s390: multiple subchannel sets supportCornelia Huck
Add support for multiple subchannel sets. Works with arbitrary devices in subchannel set 1 and is transparent to device drivers. Although currently only two subchannel sets are available, this will work with the architectured maximum number of subchannel sets as well. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] s390: introduce for_each_subchannelCornelia Huck
for_each_subchannel() is an iterator calling a function for every possible subchannel id until non-zero is returned. Convert the current iterating functions to it. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] s390: introduce struct subchannel_idCornelia Huck
This patch introduces a struct subchannel_id containing the subchannel number (formerly referred to as "irq") and switches code formerly relying on the subchannel number over to it. While we're touching inline assemblies anyway, make sure they have correct memory constraints. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] s390: reIPL fix and extern/static inlineCornelia Huck
Common i/o layer changes: - Collect the irb at the correct subchannel when waiting for the clear interrupt during subchannel cleaning befor reIPL - don't stop at the first interrupt that comes in. - Change "extern __inline__" to "static inline". - Remove unneeded qdio includes. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] s390: debug feature changesMichael Holzheu
This patch changes the memory allocation method for the s390 debug feature. Trace buffers had been allocated using the get_free_pages() function before. Therefore it was not possible to get big memory areas in a running system due to memory fragmentation. Now the trace buffers are subdivided into several subbuffers with pagesize. Therefore it is now possible to allocate more memory for the trace buffers and more trace records can be written. In addition to that, dynamic specification of the size of the trace buffers is implemented. It is now possible to change the size of a trace buffer using a new debugfs file instance. When writing a number into this file, the trace buffer size is changed to 'number * pagesize'. In the past all the traces could be obtained from userspace by accessing files in the "proc" filesystem. Now with debugfs we have a new filesystem which should be used for debugging purposes. This patch moves the debug feature from procfs to debugfs. Since the interface of debug_register() changed, all device drivers, which use the debug feature had to be adjusted. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] s390: default storage keyPeter Oberparleiter
Provide an easy way to define a non-zero storage key at compile time. This is useful for debugging purposes. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!