aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390/cio
AgeCommit message (Collapse)Author
2008-01-26[S390] cio: Use helpers instead of container_of().Cornelia Huck
- Introduce to_cssdriver. - Use to_xxx instead of container_of where possible. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Dump ccw device information in case of timeout.Sebastian Ott
Information about a ccw device will be dumped in case of a ccw timeout. This can be enabled with the kernel parameter ccw_timeout_log. Signed-off-by: Sebastian Ott <sebott@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-12-04[S390] cio: add missing reprobe loop end statementPeter Oberparleiter
Add loop end statement to prevent looping over empty subchannel sets. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-12-04[S390] cio: Issue SenseID per path.Cornelia Huck
We may receive a unit check for every path when we issue a SenseID. Unfortunately, the channel subsystem will try on a different path every time if we use a lpm of 0xff, which will exhaust our retry counter. Therefore, revert SenseID to its previous per-path behaviour and just leave out the suspend multipath reconnect. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20[S390] cio: Register/unregister subchannels only from kslowcrw.Cornelia Huck
Make sure all subchannel handling is done on the slow path workqueue so that we don't have races between an old subchannel unregistering and a new subchannel with the same name registering. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20[S390] cio: change device sense procedure to work with pav aliasesPeter Oberparleiter
Modify the sense id channel program to allow device sensing of pav alias devices which belong to a base device with ungrouped paths. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] Fix priority mistakes in drivers/s390/cio/cmf.cRoel Kluin
Fixes priority mistakes similar to '!x & y' Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-05[S390] cio: use INIT_WORK to initialize struct work.Heiko Carstens
Use INIT_WORK to initialize struct work and don't initialize a struct work partial by explicitly initializing its private structures. Fixes the following lockdep bug because no key was assigned: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. 0000000001f07bb8 0000000001f07bf8 0000000000000002 0000000000000000 0000000001f07c98 0000000001f07c10 0000000001f07c10 0000000000015406 0000000000000000 0000000000000002 0000000000000000 0000000000000000 0000000001f07bf8 000000000000000c 0000000001f07bf8 0000000001f07c68 000000000039ae60 0000000000015406 0000000001f07bf8 0000000001f07c48 Call Trace: ([<0000000000015376>] show_trace+0xda/0x104) [<0000000000015460>] show_stack+0xc0/0xf8 [<00000000000154c6>] dump_stack+0x2e/0x3c [<000000000006a71e>] __lock_acquire+0x47e/0x11a0 [<000000000006b4f0>] lock_acquire+0xb0/0xd8 [<00000000000555a6>] run_workqueue+0x1aa/0x24c [<00000000000556de>] worker_thread+0x96/0xf4 [<000000000005c210>] kthread+0x90/0xb4 [<000000000001947a>] kernel_thread_starter+0x6/0xc [<0000000000019474>] kernel_thread_starter+0x0/0xc Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22[S390] cio: Fix incomplete commit for uevent suppression.Cornelia Huck
Commit fa1a8c23eb7d3ded8a3c6d0e653339a2bc7fca9e intended to introduce uevent suppression for subchannels, but half of it was lost somewhere. Now, we end up with two uevents for every registered subchannel :( So we should better add the missing part from http://marc.info/?l=linux-kernel&m=117515953113974&w=2. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22[S390] cio: Use to_channelpath() for device to channel path conversion.Cornelia Huck
We already have a macro for that, so let's use it consistently... Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19remove asm/bitops.h includesJiri Slaby
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits) PM: merge device power-management source files sysfs: add copyrights kobject: update the copyrights kset: add some kerneldoc to help describe what these strange things are Driver core: rename ktype_edd and ktype_efivar Driver core: rename ktype_driver Driver core: rename ktype_device Driver core: rename ktype_class driver core: remove subsystem_init() sysfs: move sysfs file poll implementation to sysfs_open_dirent sysfs: implement sysfs_open_dirent sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir sysfs: make sysfs_root a regular directory dirent sysfs: open code sysfs_attach_dentry() sysfs: make s_elem an anonymous union sysfs: make bin attr open get active reference of parent too sysfs: kill unnecessary NULL pointer check in sysfs_release() sysfs: kill unnecessary sysfs_get() in open paths sysfs: reposition sysfs_dirent->s_mode. sysfs: kill sysfs_update_file() ...
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12[S390] qdio: change QDIO performance_stats error message priorityUrsula Braun
Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-10-12[S390] qdio: dont cast function pointers and use them to call functions.Heiko Carstens
According to C99 6.3.2.3 it's undefined what happens if a converted pointer is used to call a function whose type is not compatible with the pointed-to type. That's what the qdio code is doing, so fix it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] Get rid of a bunch of sparse warnings again.Heiko Carstens
Also removes a bunch of ^L in drivers/s390/cio/cmf.c Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] cio: Avoid machine check vs. not operational races.Cornelia Huck
There was the possibilty that an action like ccw_device_set_offline() triggered by a device gone machine check might trigger a not oper event. Unfortunately, this could lead to the situation that we tried to unregister a subchannel twice: Once from the slow path evaluation, and once via the not oper event. Fix this by always using the same mechanism (css_schedule_eval()) for triggering the unregister. This makes sure that unregistration will only be done once. As an added bonus, it also simplyfies the code. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] cio: Fix device attributes for early devices.Cornelia Huck
Don't forget to set dev->groups for early ccw devices like the console device so the default attributes are created. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] cio: Disable channel measurements (cmf) on shutdown/reboot.Cornelia Huck
Disable channel measurements for all ccw devices via the ccw bus's shutdown method. Clear residual cmf related information that may be in the schib when setting up a new subchannel. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] cio: Introduce ccw_bus_type.shutdown.Cornelia Huck
Introduce a shutdown method for the ccw bus that calls the driver specific shutdown method in struct ccw_driver. Switch zfcp to the new ccw_driver shutdown method. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] cio: Disable channel path measurements on shutdown/reboot.Cornelia Huck
Make sure channel path measurements are disabled via a reboot notifier since we cannot rely on userspace to disable it again after enabling it. This is 1. clean and 2. makes sure that channel path measurements do not stay enabled after a reboot not involving a subsystem reset (which would lead to the channel subsystem scribbling onto random memory). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] cio: Minor style fixes.Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] cio: Add docbook comments.Cornelia Huck
Comment a bunch of function in docbook style and convert existing comments on structures to docbook. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-10-12[S390] cio: Kerneldoc comments for cmf.Cornelia Huck
- Fix existing kerneldoc-style comments. - Move descriptions of functions from cmb.h to cmf.c. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-10-12[S390] cio: Fix some coding style issues in cmf.Cornelia Huck
Fix some formatting and correct a comment. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-10-12[S390] cio: remove subchannel_add_files()Cornelia Huck
subchannel_add_files() no longer exists, remove from header. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-10-12[S390] cio: rename css to channel_subsystemsCornelia Huck
Rename css[] to channel_subsystems[] to avoid name clashes. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22[S390] vmur: fix diag14 exceptions with addresses > 2GB.Michael Holzheu
There are several s390 diagnose calls, which must be executed below the 2GB memory boundary. In order to enforce this, those diagnoses must be compiled into the kernel. Currently diag 14 can be called within the vmur kernel module from addresses above 2GB. This leads to specification exceptions. This patch moves diag10, diag14 and diag210 into the new diag.c file. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22[S390] qdio: Refresh buffer states for IQDIO Asynchronous output queueKlaus D. Wacker
Hipersocket Multicast queue works asynchronously. When sending buffers, the buffer state change may happen delayed. The tasklet for checking changes in the outbound queue excluded IQDIO async queues from this process. This created either a hang situation when the queue ran full, or presented a hang situation a interface close time. The tasklet processing is changed to include IQDIO async queues when requesting buffer state refresh. Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-22[S390] qdio: fix EQBS handling on CCQ96Klaus D. Wacker
QDIO returned from EQBS instruction in any case after return code CCQ=96 was issued regardless whether buffer states for at least one buffer were extracted or not. This caused FCP devices to hang when running under z/VM and having QIOASSASIST=ON and having high I/O rates. In order to fix this qdio return code processing of EQBS instruction after CCQ=96 is changed that buffers are returned and if no buffers where extracted the instruction is repeated at once. Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22[S390] cio: change confusing message in cmf.Cornelia Huck
cmf currently prints a message that more than 4096 channels are not allowed in basic mode - however, this can only be enforced if cmf was a module (which is no longer possible). It makes much more sense to not check the specified number of channels and just print a message if the block for basic mode could not be allocated (which may happen for any number of specified channels). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-22[S390] cio: dont forget to set last slot to NULL in ccw_uevent().Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-10[S390] qdio: make sure data structures are correctly aligned.Heiko Carstens
The slsb structure contained at the beginning of the qdio_q structure must start on a 256 byte boundary. To make sure this is the case even if slab debugging is turned on create an own slab cache for qdio_q structures. Besides that don't use the slab allocator to allocate whole pages. Use the page allocator instead. Also fix a few memory leaks in error handling code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10[S390] cio: avoid memory leak on error in css_alloc_subchannel().Cornelia Huck
sch->lock has been allocated in cio_validate_subchannel(), it must be freed if cio_modify() fails. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: Reorganize initialization.Cornelia Huck
- Localize more of the init calls in init_channel_subsystem(). - Print a warning if init_channel_subsystem() failed. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: Make CIO_* macros safe if dbfs are not available.Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: Clean up messages.Cornelia Huck
- Remove unneeded messages. - Move some messages into the debug feature. - Use dev_* where appropriate. - Use "cio: " prefix consistently. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: Remove deprecated rdc/rcd.Cornelia Huck
http://marc.info/?l=linux-kernel&m=118481061928246&w=2 seems to indicate disfavour of "deprecated", so let's just kill it now. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: Remove remains of _ccw_device_get_device_number().Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: css_sch_device_register() can be made static.Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-17[S390] Fix broken logic, SIGA flags must be bitwise ORedJan Glauber
Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-17[S390] cio: Dont print trailing \0 in modalias_show().Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-17[S390] qdio: output queue stall on FCP and network devicesFrank Pavlic
When running QIOASSIST enabled qdio devices in a z/VM environment the output queue for such devices stall in heavy workload situations. When SQBS and EQBS instructions returns CCQ=96 qdio does not reissue the instruction again with the register settings done by millicode but processed the returned qdio buffer. This is wrong. qdio has to reissue the instruction once again on CCQ=96, as we already do it for CCQ=97. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-11sysfs: add parameter "struct bin_attribute *" in .read/.write methods for ↵Zhang Rui
sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11sysfs: kill unnecessary attribute->ownerTejun Heo
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-10[S390] Program check in diag 210 under 31 bitMichael Holzheu
If a virtual address is passed to the diag210 function under 31 bit, we get a programming exception, since diag 210 only works with physical addresses. To fix this, the content of the diag210 data structure is copied to a local structure and the physical address of that structure is passed to diagnose 210. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-31[S390] cio: deregister ccw device when pgid disband failedPeter Oberparleiter
Deregister ccw device when device failure is detected during offline- processing (e.g. when no last-path-gone indication was presented by the hardware) to prevent the device from entering a non-recoverable not-operational state. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-31[S390] cio: Use device_schedule_callback() for removing disconnected devices.Cornelia Huck
We can't deregister disconnected and orphaned devices directly from the online attribute's store method, but must take a detour. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10[S390] qdio: re-add lost perf_stats.tl_runs change in qdio_handle_pciUrsula Braun
Statement has been inadvertently lost with commit 00c0c6466c66bdf05f2a3dcf59e6895179ea8b76. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>