aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390/net/qeth_main.c
AgeCommit message (Collapse)Author
2007-07-16s390: add barriers to qeth driverFrank Blaschka
Add barrier to loop where atomic variable is evaluated. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16s390: scatter-gather for inbound traffic in qeth driverFrank Blaschka
For large incoming packets > PAGE_SIZE/2 qeth creates a fragmented skb by adding pointers to qdio pages to the fragment list of the skb. This avoids allocating big chunks of consecutive memory. Also copying data from the qdio buffer to the skb is economized. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20s390: Use ccw_device_get_id() in qeth/claw driversCornelia Huck
Use ccw_device_get_id() to get a device number instead of parsing the ccw device's bus id. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20s390: avoid inconsistent lock state in qethUrsula Braun
ipv6_regen_rndid in net/ipv6/addrconf.c makes use of "write_lock_bh" for its inet6_dev->lock. It may run in softirq-context. qeth makes use of "read_lock" for the same inet6_dev->lock. To avoid a potential deadlock situation, qeth should make use of "read_lock_bh" for its usages of inet6_dev->lock. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20s390: qeth driver does not recoverUrsula Braun
While first recovery continues, the card issues a STARTLAN command itself. In this case qeth schedules another recovery. This second recovery is cancelled because of an already running first recovery. Stop first recovery in case of 0xe080. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20s390: print correct level for HiperSockets devicesUrsula Braun
For real HiperSockets the EBCDIC-ASCII conversion is not necessary. This is only needed for z/VM GuestLAN devices. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-09Fix occurrences of "the the "Michael Opdenacker
Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-08s390: qeth driver hardware specs adaptionsPeter Tiedemann
s390: qeth driver hardware specs adaptions - according to the latest OSA hardware specification incorporate actual IPA command and return codes into qeth. - whitespaces removed from qeth_mpc.h Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-08s390: free skbs in finite amount of time in qethUrsula Braun
Free sent skbs in some finite amount of time. Affected are asynchronous queue of Hipersockets devices and the output queues of all eth-devices respectively. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-08s390: qeth driver connection hangUrsula Braun
Frank Pavlic <fpavlic@de.ibm.com> Connection hangs when using EDDP mode because sk_protocol is NULL when skb has been copied via skb_copy. This results in dropping packets. Also keep MAC address after recovery of Virtual NICs so that traffic can flow again and duplicate statements in qeth_dev_set_route_store removed. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-04[S390] qeth: New read configuration data.Cornelia Huck
Instead of the deprecated read_conf_data(), implement a new function qeth_read_conf_data(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-25[SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-25[SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6hArnaldo Carvalho de Melo
Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iphArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_network_header()Arnaldo Carvalho de Melo
For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_set_mac_header()Arnaldo Carvalho de Melo
For the cases where we want to set skb->mac.raw to an offset from skb->data. Simple cases first, the memmove ones and specially pktgen will be left for later. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_reset_mac_header(skb)Arnaldo Carvalho de Melo
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[QETH]: Use eth_hdr()Arnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TR]: Use tr_hdr() were appropriateArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02[VLAN]: Avoid a 4-order allocation.Dan Aloni
This patch splits the vlan_group struct into a multi-allocated struct. On x86_64, the size of the original struct is a little more than 32KB, causing a 4-order allocation, which is prune to problems caused by buddy-system external fragmentation conditions. I couldn't just use vmalloc() because vfree() cannot be called in the softirq context of the RCU callback. Signed-off-by: Dan Aloni <da-x@monatomic.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-05[S390] Avoid excessive inlining.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-01-09s390: qeth driver fixes: atomic context fixupsFrank Blaschka
- qeth device functions were not callable in atomic context due to usage of wait_event_xxx operations in qeth. "schedule while atomic" message appeared and kernel dumped when removing slave from bond device. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-09s390: qeth driver fixes: packet socketFrank Blaschka
- packet socket support is not complete. Recvfrom a packet socket does not fill the sockaddr_ll structure. device function hard_header_parse is not implemented. For layer 2 mode and layer 3 mode with fake_ll turned on, we have the information to fill sockaddr_ll. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-09s390: qeth driver fixes: VLAN hdr, perf statsFrank Blaschka
From: Ursula Braun <braunu@de.ibm.com> - VLAN header reordering did not work on packets received through qeth interface in layer 2 mode. This caused dhcpcd not to work with VLAN devices. - set qeth performance statistics initally inactive Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-07qeth: fix uaccess handling and get rid of unused variableHeiko Carstens
[patch] qeth: fix uaccess handling and get rid of unused variable drivers/s390/net/qeth_main.c: In function `qeth_process_inbound_buffer': drivers/s390/net/qeth_main.c:2563: warning: unused variable `vlan_addr' include/asm/uaccess.h: In function `qeth_do_ioctl': drivers/s390/net/qeth_main.c:4847: warning: ignoring return value of `copy_to_user' drivers/s390/net/qeth_main.c:4849: warning: ignoring return value of `copy_to_user' drivers/s390/net/qeth_main.c:4996: warning: ignoring return value of `copy_to_user' Cc: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-06[PATCH] More work_struct induced breakage (s390)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04[S390] non-unique constant/macro identifiers.Ursula Braun
Add some prefixes to constands defined in drivers/s390/net/qdio.h and drivers/s390/lcs.h to make it possible to include the three header files drivers/s390/net/qeth.h, drivers/s390/net/qdio.h and drivers/net/s390/lcs.h in one C file. This is required for the patch that generates the kerntypes.o file for use by lcrash. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28[IPV4]: inet_addr_type() annotationsAl Viro
argument and inferred net-endian variables in callers annotated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-17[PATCH] s390: qeth driver fixes [6/6]Frank Pavlic
[PATCH 9/9] s390: qeth driver fixes [6/6] From: Frank Pavlic <fpavlic@de.ibm.com> - Hipersockets has no IPV6 support, thus prevent issueing SETRTG_IPV6 control commands on Hipersockets devices. - fixed error handling in qeth_sysfs_(un)register Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [5/6]Frank Pavlic
[PATCH 8/9] s390: qeth driver fixes [5/6] From: Frank Pavlic <fpavlic@de.ibm.com> fix kernel panic in qdio queue handling. qeth_qdio_clear_card() could be invoked by 2 CPUs simultaneously (for example reboot event and recovery). Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [4/6]Frank Pavlic
[PATCH 7/9] s390: qeth driver fixes [4/6] From: Frank Pavlic <fpavlic@de.ibm.com> - fix kernel crash due to race, set card->state to SOFTSETUP after card and card->dev are initialized properly. - remove CONFIG_QETH_PERF_STATS, use sysfs attribute instead, as we want to have the ability to turn on/off the statistics at runtime. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [3/6]Frank Pavlic
[PATCH 6/9] s390: qeth driver fixes [3/6] From: Frank Pavlic <fpavlic@de.ibm.com> fixed kernel panic caused by qeth driver: Using a bonding device qeth driver will realloc headroom for every skb coming from the bond device. Once this happens qeth frees the original skb and set the skb pointer to the new realloced skb. Under heavy transmit workload (e.g.UDP streams) through bond network device the qdio output queue might get full. In this case we return with EBUSY from qeth_send_packet. Returning to qeth_hard_start_xmit routine the skb address on the stack still points to the old address, which has been freed before. Returning from qeth_hard_start_xmit with EBUSY results in requeuing the skb. In this case it corrupts the qdisc queue and results in kernel panic. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [1/6]Frank Pavlic
[PATCH 4/9] s390: qeth driver fixes [1/6] From: Frank Pavlic <fpavlic@de.ibm.com> - Drop incoming packets with vlan_tag set if card->vlangrp is not set. - use always vlan_hwaccel_rx to pass vlan frames to the stack. - fix recovery problem. Device was recovered properly but still not working. netif_carrier_on call right before recovery start fixes it. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] s390: fix arp_tbl lock usage in qethHeiko Carstens
qeth: bhs must be disabled when accessing neighbour tables. ================================= [ INFO: inconsistent lock state ] Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-18[S390] sysfs_create_xxx return values.Heiko Carstens
Take return values of sysfs_create_group & friends into account. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] Fix sparse warnings.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-10[PATCH] s390: move var declarations behind ifdefSerge E. Hallyn
Two variables in drivers/s390/net/qeth_main.c:qeth_send_packet() are only used if CONFIG_QETH_PERF_STATS. Move their definition under the same ifdef to remove compiler warning. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-08[NET] gso: Add skb_is_gsoHerbert Xu
This patch adds the wrapper function skb_is_gso which can be used instead of directly testing skb_shinfo(skb)->gso_size. This makes things a little nicer and allows us to change the primary key for indicating whether an skb is GSO (if we ever want to do that). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-03[PATCH] lockdep: annotate qeth driverHeiko Carstens
Annotate the qeth driver which uses a private skb-queue-head that is safely used in hardirq context too. Has no effect on non-lockdep kernels. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-23[NET]: Merge TSO/UFO fields in sk_buffHerbert Xu
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not going to scale if we add any more segmentation methods (e.g., DCCP). So let's merge them. They were used to tell the protocol of a packet. This function has been subsumed by the new gso_type field. This is essentially a set of netdev feature bits (shifted by 16 bits) that are required to process a specific skb. As such it's easy to tell whether a given device can process a GSO skb: you just have to and the gso_type field and the netdev's features field. I've made gso_type a conjunction. The idea is that you have a base type (e.g., SKB_GSO_TCPV4) that can be modified further to support new features. For example, if we add a hardware TSO type that supports ECN, they would declare NETIF_F_TSO | NETIF_F_TSO_ECN. All TSO packets with CWR set would have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO packets would be SKB_GSO_TCPV4. This means that only the CWR packets need to be emulated in software. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-26[netdrvr s/390] trim trailing whitespaceJeff Garzik
Previous fix patches added a bunch of trailing whitespace, which git-applymbox complained loudly about.
2006-05-26[PATCH] s390: qeth driver fixesUrsula Braun
From: Frank Blaschka <Frank.Blaschka@de.ibm.com> From: Frank Pavlic <fpavlic@de.ibm.com> - fix fake_ll during initial device bringup. fake_ll was not active after first start of the device. Problem only occured when qeth was built without IPV6 support. - avoid skb usage after invocation of qeth_flush_buffers, because skb might already be freed. - remove yet another useless netif_wake_queue in qeth_softsetup_ipv6 since this function is only called when device is going online. In this case card->state will never be in state UP. So let the net_device queue down . Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-26[PATCH] s390: qeth driver fixesUrsula Braun
From: Frank Pavlic <fpavlic@de.ibm.com> - correct checking of sscanf-%n value in qeth_string_to_ipaddr(). - don't use netif_stop_queue outside the hard_start_xmit routine. Rather use netif_tx_disable. - don't call qeth_netdev_init on a recovery. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-01[PATCH] s390: make qeth buildableBastian Blank
Signed-off-by: Bastian Blank <bastian@waldi.eu.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] s390: kzalloc() conversion in drivers/s390Eric Sesterhenn
Convert all kmalloc + memset sequences in drivers/s390 to kzalloc usage. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] s390: qeth :allow setting of attribute "route6" to "no_router".Frank Pavlic
[patch 4/6] s390: qeth :allow setting of attribute "route6" to "no_router". From: Ursula Braun <braunu@de.ibm.com> when setting route6 attribute back to no_router qeth does not issue an IP ASSIST command to reset router value to no_router. Once primary_router is set device stays in this mode. Issue an IP ASSIST command when no_router is set in route6. Device will be reset and thus will not longer run as a primary router. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 5 ----- 1 files changed, 5 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] s390: qeth driver cleanupsFrank Pavlic
[patch 3/6] s390: qeth driver cleanups From: Ursula Braun <braunu@de.ibm.com> - code analyzing tool BEAM has found some unreachable and unnecessary statements and also conditions which are always true. - removed some useless MII code since OSA card will never allow to set such values. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 49 ++++--------------------------------------------- qeth_proc.c | 18 +++++++++--------- qeth_sys.c | 2 +- 3 files changed, 14 insertions(+), 55 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] s390: qeth driver statistics fixesFrank Pavlic
[patch 2/6] s390: qeth driver statistics fixes From: Ursula Braun <braunu@de.ibm.com> - display "unsigned int" values in /proc/qeth_perf with %u instead of %i - omit qdio header length when increasing card->stats.tx_bytes Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 3 ++- qeth_proc.c | 38 +++++++++++++++++++------------------- 2 files changed, 21 insertions(+), 20 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-17[PATCH] s390: some qeth driver fixesFrank Pavlic
[patch 2/2] s390: some qeth driver fixes From: Frank Pavlic <fpavlic@de.ibm.com> - fixed kernel panic when using EDDP support in Layer 2 mode - NULL pointer exception in qeth_set_offline fixed. - setting EDDP in Layer 2 mode did not set NETIF_F_(SG/TSO) flags when device became online. - use sscanf for parsing and converting IPv4 addresses from string to __u8 values. - qeth_string_to_ipaddr6 fixed. in case of double colon the converted IPv6 address out from the string was not correct in previous implementation. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 112 +++++++++++++++++++++++++----------------------------------- qeth_eddp.c | 11 ++++- qeth_main.c | 17 +++------ 3 files changed, 63 insertions(+), 77 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 05:14:17 +0000