aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390/scsi
AgeCommit message (Collapse)Author
2009-12-04[SCSI] zfcp: Remove flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPPChristof Schmitt
The flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP is never set and hence can be removed. This is a leftover from the time when zfcp had to decide whether the target supports a "logical unit reset" or not. Nowadays, the SCSI midlayer calls the eh_device_reset_handler or the eh_target_reset_handler and zfcp simply maps this to a "logical unit reset" or a "target reset". Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Activate fc4s attributes for zfcp in FC transport classChristof Schmitt
Enable the display of supported and active fc4s for zfcp in the FC transport class. zfcp only supports FCP, so simply hard-code this information. The zfcp hbaapi already has this information hardcoded, but this would allow to switch from the coding in the zfcp hbaapi to the common FC transport attributes in the future. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Block scsi_eh thread for rport state BLOCKEDChristof Schmitt
In case the SCSI error recovery starts because of a SCSI command timeout, but then something else triggers the rport to be deleted, the SCSI error recovery will run to the end and set the SCSI device offline. To prevent this, call the FC transport function fc_block_scsi_eh which waits until the rport leaves the BLOCKED state. This guarantees that communication is possible if the rport is ONLINE, or the SCSI devices will be removed if the rport state switches to NOT_PRESENT. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Update FSF error reportingChristof Schmitt
The SCSI midlayer retries commands based on the remote port state and the command status reported by the driver. Returning DID_TRANSPORT_DISRUPTED is a better approach, use this for reporting FSF errors back to the SCSI midlayer. See http://marc.info/?l=linux-scsi&m=125668044215051&w=2 as reference. There is also no need in special treatment of ABORTED commands, so remove the ZFCP_STATUS_FSFREQ_ABORTED, the commands are then returned with DID_TRANSPORT_DISRUPTED. Also remove the ZFCP_STATUS_FSFREQ_RETRY: It is useless, no retry is happening in the FSF layer and nobody checks the state of this flag. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Improve ELS ADISC handlingChristof Schmitt
Introduce kmem_cache for ELS ADISC data to guarantee the required hardware alignment and free the allocated memory in case the send failes. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Simplify handling of ct and els requestsChristof Schmitt
Remove some redundancies in FC related code and trace: - drop redundant data from SAN trace (local s_id that only changes during link down, ls_code that is already part of payload, d_id in ct response trace that is always the same as in ct request trace) - use one common fsf struct to hold zfcp data for ct and els requests - leverage common fsf struct for FC passthrough job data, allocate it with dd_bsg_data for passthrough requests and unify common code for ct and els passthrough request - simplify callback handling in zfcp_fc Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Remove ZFCP_DID_MASKChristof Schmitt
Instead of assigning 4 bytes with the highest byte masked out, use a 3 byte array with the ntoh24 and h24ton helper functions, thus eliminating the need for the ZFCP_DID_MASK. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Move WKA port to zfcp FC codeChristof Schmitt
The well-known-address (WKA) port handling code is part of the FC code in zfcp. Move everything WKA related to the zfcp_fc files and use the common zfcp_fc prefix for structs and functions. Drop the unused key management service while renaming the struct, no request could ever reach this service in zfcp and it is obsolete anyway. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Use common code definitions for FC CT structsChristof Schmitt
Use common code definitions for FC GPN_FT and GID_PN instead of inventing private ones. Move the private structs still required inside zfcp to zfcp_fc header file. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Use common code definitions for FC ELS structsChristof Schmitt
Use common code definitions for FC plogi, logo, rscn and adisc structs instead of inventing private ones. Move the private struct for issuing ELS ADISC inside zfcp to zfcp_fc header file. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Update FCP protocol related codeChristof Schmitt
Use common data structures for FCP CMND, FCP RSP and related definitions and remove zfcp private definitions. Split the FCP CMND setup and FCP RSP evaluation code in seperate functions. Use inline functions to not negatively impact the I/O path. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rportChristof Schmitt
If an error occurs that triggers the call to fc_remote_port_delete, ideally this call would happen before any I/O is passed back to the SCSI midlayer through scsi_done. The SCSI midlayer will retry the commands and fc_remote_port_chkready will return the correct status code. But with the delay between calling scsi_done in softirq context and the call to fc_remote_port_delete from the workqueue, there is a window where zfcp returns DID_ERROR. This leads to SCSI error recovery which then leads to offline SCSI devices since all recovery actions will fail with the rport now being blocked. In this window, zfcp has to return DID_IMM_RETRY just as the FC transport class would do in fc_remote_port_chkready for the blocked fc_rport. As soon as the fc_rport is BLOCKED, fc_remote_port_chkready will do the right thing. Additionally, there are two more cases to catch in zfcp_scsi_queuecommand: - After the port has been opened, the unit has to be opened. During this period I/O has to be retried. This can also be handled with DID_IMM_RETRY. - If the access to the unit fails, but the port is good, then this single unit cannot be accessed and I/O to this unit has to fail without involving the FC transport class. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Assign scheduled work to driver queueSwen Schillig
The port_scan work was scheduled to the work_queue provided by the kernel. This resulted on SMP systems to a likely situation that more than one scan_work were processed in parallel. This is not required and openes the possibility of race conditions between the removal of invalid ports and the enqueue of just scanned ports. This patch synchronizes the scan_work tasks by scheduling them to adapter local work_queue. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Remove STATUS_COMMON_REMOVE flag as it is not required anymoreSwen Schillig
The flag ZFCP_STATUS_COMMON_REMOVE was used to indicate that a resource is not ready to be used or about to be removed from the system. This is now better done by an improved list handling and therefore the additional indicator is not required anymore. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Implement module unloadingChristof Schmitt
With the reference counting for zfcp data structures, it is now possible to implement module unloading again. Module unloading requires to free all data structures in the module exit function. This is done by unregistering zfcp from s390 cio and the SCSI midlayer first in the module exit function. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Merge trace code for fsf requests in one functionChristof Schmitt
The latencies traced per fsf request are traced for sysfs output and for blktrace, each in one function. Simplify the tracing code by merging both tracing functions into one. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Access ports and units with container_of in sysfs codeChristof Schmitt
When accessing port and unit attributes, use container_of instead of dev_get_drvdata. This eliminates some code checker warnings about aliased access of data structures. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Remove suspend callbackSwen Schillig
The callback for suspend is not required because it contains exactly the same functionality as the _set_offline routine does. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Remove global config_mutexSwen Schillig
The global config_mutex was required for the serialization of a configuration change within the zfcp driver. This global locking is now obsolete and can be removed. The requirement of serializing the access to a zfcp_adapter reference via a ccw_device is realized wth a static spinlock. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Replace local reference counting with common krefSwen Schillig
Replace the local reference counting by already available mechanisms offered by kref. Where possible existing device structures were used, including the same functionality. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Replace global config_lock with local list locksSwen Schillig
The global config_lock was used to protect the configuration organized in independent lists. It is not necessary to have a lock on driver level for this purpose. This patch replaces the global config_lock with a set of local list locks. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] zfcp: Adapt change_queue_depth for queue full trackingChristof Schmitt
Adapt the change_queue_depth callback in zfcp for the new reason parameter. Simply pass each call back to the SCSI midlayer, there are no resource adjustments necessary for zfcp. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Removes check for (depth <= default_depth) in case of SCSI_QDEPTH_RAMP_UP call back, not needed after added max_queue_depth per sdev. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] modify change_queue_depth to take in reason why it is being calledMike Christie
This patch modifies scsi_host_template->change_queue_depth so that it takes an argument indicating why it is being called. This will be used so that if a LLD needs to do some extra processing when handling queue fulls or later ramp ups, it can do so. This is a simple port of the drivers setting a change_queue_depth callback. In the patch I just have these LLDs adjust the queue depth if the user was requesting it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> [Vasu.Dev: v2 Also converted pmcraid_change_queue_depth and then verified all modules compile using "make allmodconfig" for any new build warnings on X86_64. Updated original description after combing two original patches from Mike to make this patch git bisectable.] Signed-off-by: Vasu Dev <vasu.dev@intel.com> [jejb: fixed up 53c700] Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-22[SCSI] zfcp: Flush SCSI registration work when adding unitChristof Schmitt
When configuring a LUN for use in zfcp, flush the SCSI work to ensure the SCSI device has been created before returning. This means that a configuration procedure can run these commands in a script and the SCSI device is available immediately after the unit_add: echo 1 > /sys/bus/ccw/drivers/zfcp/0.0.181d/online echo 0x401040C300000000 > \ /sys/bus/ccw/drivers/zfcp/0.0.181d/0x500507630313c562/unit_add lsscsi Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-22[SCSI] zfcp: Fix timer initialization for ct and els requestsChristof Schmitt
Add HZ since the start_timer function expects jiffies, not seconds. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-22[SCSI] zfcp: Warn about storage devices with broken PLOGI dataChristof Schmitt
After opening a remote port zfcp checks if the WWPN returned in the PLOGI maches the WWPN of the port that should have been opened. On a mismatch zfcp assumes that the DID just changed, queries the FC nameserver and tries again. If the situation persists the erp will give up. With this strategy, if the remote port always returns the wrong PLOGI data, the remote port will not be opened. Introduce a warning, so that the system administrator knows why the remote port is not being opened and to have a pointer to investigate the problem on the storage system. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-22[SCSI] zfcp: Handle WWPN mismatch in PLOGI payloadChristof Schmitt
For ports, zfcp gets the DID from the FC nameserver and tries to open the port. If the open succeeds, zfcp compares the WWPN from the nameserver with the WWPN in the PLOGI payload. In case of a mismatch, zfcp assumes that the DID of the port just changed and we opened the wrong port. This means that zfcp has to forget the DID, lookup the DID again and retry. This error case had a problem that zfcp forgets the DID, but never looks up a new one, stalling the ERP in this case. Fix this by triggering the DID lookup and properly exit from the ERP. The DID lookup will trigger a new ERP action. Also ensure when trying to open the port again with the new DID, first close the open port, even in the NOESC case. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-22[SCSI] zfcp: fix kfree handling in zfcp_init_device_setupHeiko Carstens
The pointer that is allocated with kmalloc() is passed to strsep() which modifies it. Later on the modified pointer value will be passed to kfree. Save the original pointer and pass that one to kfree instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02[SCSI] zfcp: Fix hang when offlining device with offline chpidChristof Schmitt
Running chchp --vary 0 and chccwdev -d on a FCP device with scsi devices attached can lead to this thread hanging: ================================================================ STACK TRACE FOR TASK: 0x2fbfcc00 (kslowcrw) STACK: 0 schedule+1136 [0x45f99c] 1 schedule_timeout+534 [0x46054e] 2 wait_for_common+374 [0x45f442] 3 blk_execute_rq+160 [0x217a2c] 4 scsi_execute+278 [0x26daf2] 5 scsi_execute_req+150 [0x26dc86] 6 sd_sync_cache+138 [0x28460a] 7 sd_shutdown+130 [0x28486a] 8 sd_remove+104 [0x284c84] 9 __device_release_driver+152 [0x257430] 10 device_release_driver+56 [0x2575c8] 11 bus_remove_device+214 [0x25672a] 12 device_del+352 [0x25456c] 13 __scsi_remove_device+108 [0x272630] 14 scsi_remove_device+66 [0x2726ba] 15 zfcp_ccw_remove+824 [0x335558] 16 ccw_device_remove+62 [0x2b3f2a] 17 __device_release_driver+152 [0x257430] 18 device_release_driver+56 [0x2575c8] 19 bus_remove_device+214 [0x25672a] 20 device_del+352 [0x25456c] 21 ccw_device_unregister+92 [0x2b48c4] 22 io_subchannel_remove+108 [0x2b4950] 23 css_remove+62 [0x2af7ee] 24 __device_release_driver+152 [0x257430] 25 device_release_driver+56 [0x2575c8] 26 bus_remove_device+214 [0x25672a] 27 device_del+352 [0x25456c] 28 device_unregister+38 [0x25464a] 29 css_sch_device_unregister+68 [0x2af97c] 30 ccw_device_call_sch_unregister+78 [0x2b581e] 31 worker_thread+604 [0x69eb0] 32 kthread+154 [0x6ff42] 33 kernel_thread_starter+6 [0x1c952] ================================================================ The problem is that the chchp --vary 0 leads to zfcp first calling fc_remote_port_delete which blocks all scsi devices on the remote port. Calling scsi_remove_device later lets the sd driver issue a SYNCHRONIZE_CACHE command. This command stays on the "stopped" request requeue because the SCSI device is blocked. Fix this by first removing the scsi and fc hosts which removes all scsi devices and do not use scsi_remove_device. Reviewed-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02[SCSI] zfcp: Fix lockdep warning when offlining device with offline chpidChristof Schmitt
======================================================= [ INFO: possible circular locking dependency detected ] 2.6.31-39.x.20090917-s390xdefault #1 ------------------------------------------------------- kslowcrw/83 is trying to acquire lock: (&adapter->scan_work){+.+.+.}, at: [<0000000000169c5c>] __cancel_work_timer+0x64/0x3d4 but task is already holding lock: (&zfcp_data.config_mutex){+.+.+.}, at: [<00000000004671ea>] zfcp_ccw_remove+0x66/0x384 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&zfcp_data.config_mutex){+.+.+.}: [<0000000000189962>] __lock_acquire+0xe26/0x1834 [<000000000018a4b6>] lock_acquire+0x146/0x178 [<000000000058cb5a>] mutex_lock_nested+0x82/0x3ec [<0000000000477170>] zfcp_fc_scan_ports+0x3ec/0x728 [<0000000000168e34>] worker_thread+0x278/0x3a8 [<000000000016ff08>] kthread+0x9c/0xa4 [<0000000000109ebe>] kernel_thread_starter+0x6/0xc [<0000000000109eb8>] kernel_thread_starter+0x0/0xc -> #0 (&adapter->scan_work){+.+.+.}: [<0000000000189e60>] __lock_acquire+0x1324/0x1834 [<000000000018a4b6>] lock_acquire+0x146/0x178 [<0000000000169c9a>] __cancel_work_timer+0xa2/0x3d4 [<0000000000465cb2>] zfcp_adapter_dequeue+0x32/0x14c [<00000000004673e4>] zfcp_ccw_remove+0x260/0x384 [<00000000004250f6>] ccw_device_remove+0x42/0x1ac [<00000000003cb6be>] __device_release_driver+0x9a/0x10c [<00000000003cb856>] device_release_driver+0x3a/0x4c [<00000000003ca94c>] bus_remove_device+0xcc/0x114 [<00000000003c8506>] device_del+0x162/0x21c [<0000000000425ff2>] ccw_device_unregister+0x5e/0x7c [<000000000042607e>] io_subchannel_remove+0x6e/0x9c [<000000000041ff9a>] css_remove+0x3e/0x7c [<00000000003cb6be>] __device_release_driver+0x9a/0x10c [<00000000003cb856>] device_release_driver+0x3a/0x4c [<00000000003ca94c>] bus_remove_device+0xcc/0x114 [<00000000003c8506>] device_del+0x162/0x21c [<00000000003c85e8>] device_unregister+0x28/0x38 [<0000000000420152>] css_sch_device_unregister+0x46/0x58 [<00000000004276a6>] io_subchannel_sch_event+0x28e/0x794 [<0000000000420442>] css_evaluate_known_subchannel+0x46/0xd0 [<0000000000420ebc>] slow_eval_known_fn+0x88/0xa0 [<00000000003caffa>] bus_for_each_dev+0x7e/0xd0 [<000000000042188c>] for_each_subchannel_staged+0x6c/0xd4 [<0000000000421a00>] css_slow_path_func+0x54/0xd8 [<0000000000168e34>] worker_thread+0x278/0x3a8 [<000000000016ff08>] kthread+0x9c/0xa4 [<0000000000109ebe>] kernel_thread_starter+0x6/0xc [<0000000000109eb8>] kernel_thread_starter+0x0/0xc cancel_work_sync is called while holding the config_mutex. But the work that is being cancelled or flushed also uses the config_mutex. Fix the resulting deadlock possibility by calling cancel_work_sync earlier without holding the mutex. The best place to do is is after offlining the device. No new port scan work will be scheduled for the offline device, so this is a safe place to call cancel_work_sync. Reviewed-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02[SCSI] zfcp: Fix oops during shutdown of offline deviceChristof Schmitt
With the change that the zfcp_adapter struct is only allocated when the device is set online, the shutdown handler has to check for a non-existing zfcp_adapter struct. On the other hand, this check is not necessary in the offline callback, since an online device has the zfcp_adapter allocated and we go through the offline callback before removing the ccw device. Reviewed-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02[SCSI] zfcp: Fix initial device and cfdc for delayed adapter allocationChristof Schmitt
With the change for delaying the allocation of zfcp_adapter, the initial device parameter function has to first call ccw_device_set_online which allocates the zfcp_adapter structure. Change this and adapt the cfdc part accordingly. Reviewed-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02[SCSI] zfcp: correctly initialize unchained requestsChristof Schmitt
The common initialization of ct/gs and els requests missed the initialization of unchained requests. Fix this by moving the common parts to a place that is called for all ct/gs and els requests. Reviewed-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-21trivial: remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-05[SCSI] zfcp: optimize zfcp_qdio_accountHeiko Carstens
Remove expensive ktime_get()/ktime_us_delta() functions from the hot path and use get_clock_monotonic() instead. This elimates seven function calls and avoids a lot of unnecessary calculations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Remove duplicated code for debug timestampsChristof Schmitt
The timestamp calculation used for s390dbf output is the same in a private zfcp function and in debug.c. Replace both with a common inline function. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Handle failures during device allocation correctlyChristof Schmitt
dev_set_name tries to allocate memory, so check the return value for allocation failures. After dev_set_name succeeds, call device_register as next step to be able to use put_device during error handling. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: proper use of device registerSebastian Ott
Don't use kfree directly after device registration started. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Replace config semaphore with mutexChristof Schmitt
The config semaphore is only used as a mutex, so replace it with a simple mutex. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Defer resource allocation to first ccw_set_online callChristof Schmitt
So far, zfcp allocated all resources required for FCP adapters/subchannels when the device was discovered in the ccw_probe callback. If there are lots of unused FCP subchannels attached to a system, this is a waste of resources. To alleviate this, defer the resource allocation to the first call to ccw_set_online. To avoid disruptions during possible following calls to ccw_set_offline and then ccw_set_online, keep the adapter resources until the device is finally being removed via ccw_remove. While doing this, also manage the zfcp erp thread together with all other adapter resources in zfcp_adapter_enqueue/dequeue. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Simplify and update ct/gs and els timeout handlingChristof Schmitt
The recommendation for a timeout of 2 * R_A_TOV is the same for ct/gs and els requests, so set it in the common function used for initializing both request types. Besides, the timer inside zfcp should only run longer than the timeout set for the channel, so 10 seconds more should be enough (instead of 60 seconds). Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Use kthread API for zfcp erp threadChristof Schmitt
Switch the creation of the zfcp erp thread from the deprecated kernel_thread API to the kthread API. This allows also the removal of some flags in zfcp since the kthread API handles thread creation and shutdown internally. To allow the usage of the kthread_stop function, replace the erp ready semaphore with a waitqueue for waiting until erp actions arrive on the ready queue. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: resolve false usage of dd_data in fc_rportSwen Schillig
The fc_rport structure reserves a reference where a LLD can put information required in a situation where the fc transport class is triggering LLD callbacks. The zfcp driver was using this variable directly which is discouraged. This patch solves this issue by making this reference unnecessary. In addition the dev_loss_tmo callback is removed, it is not required: zfcp does not access the fc_rport after calling fc_remote_port_delete. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Apply common naming conventions to zfcp_fcSwen Schillig
Update the Fibre Channel related code to use the zfcp_fc prefix. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: introduce _setup, _destroy for qdio and FCSwen Schillig
Extract independent data structures and introduce common _setup and _destroy routines for QDIO and Fibre Channel related data structures Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Update dbf callsSwen Schillig
Change the dbf data and functions to use the zfcp_dbf prefix throughout the code. Also change the calls to dbf to use zfcp_dbf instead of zfcp_adapter. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Decouple gid_pn requests from erpChristof Schmitt
Don't let the erp wait for gid_pn requests to complete. Instead, queue the gid_pn work, exit erp and let the finished gid_pn work trigger a new port reopen. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Move qdio related data out of zfcp_adapterSwen Schillig
The zfcp_adapter structure was growing over time to a size of almost one memory page. To reduce the size of the data structure and to seperate different layers, put all qdio related data in the new zfcp_qdio data structure. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Separate qdio attributes from zfcp_fsf_reqSwen Schillig
Split all qdio related attributes out of zfcp_fsf_req and put it in new structure. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05[SCSI] zfcp: Move workqueue to adapter structSwen Schillig
Remove the global driver work queue and replace it with a workqueue local to the adapter. The usage of this workqueue makes this the correct place for the structure. In addition multiple adapters won't block each other due to the serialization of the queued work. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>