aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2008-10-31Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/p54/p54common.c
2008-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: amd8111e: Fix rx return code pktgen: fix multiple queue warning mac80211.h: fix kernel-doc excesses p54: fix build warnings ath5k: Reset key cache on interface up, thus fixing resume mac80211: correct warnings in minstrel rate control algorithm RFKILL: fix input layer initialisation p54: fix misbehavings when firmware can't be found dm9601: runtime mac address change support via-velocity: use driver string instead of dev->name before register_netdev() drivers/net/wan/syncppp: Fix unused-var warnings mlx4: Setting the correct offset for default mac address mlx4_en: remove duplicated #include ibm_newemac: Fix typo in flow control config option ehea: Detect 16GB hugepages for firmware restriction dmfe: check pci_alloc_consistent errors qeth: avoid skb_under_panic for malformatted inbound data qeth: remove unnecessary support ckeck in sysfs route6 qeth: fix offset error in non prealloc header path qeth: remove non-recover-thread checkings
2008-10-28[S390] tape: disable interrupts in tape_open and tape_releaseFrank Munzert
Get tape device lock with interrupts disabled. Otherwise lockdep will issue a warning similar to: ================================= [ INFO: inconsistent lock state ] 2.6.27 #1 --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. vol_id/2903 [HC0[0]:SC0[0]:HE1:SE1] takes: (sch->lock){++..}, at: [<000003e00004c7a2>] tape_open+0x42/0x1a4 [tape] {in-hardirq-W} state was registered at: [<000000000007ce5c>] __lock_acquire+0x894/0xa74 [<000000000007d0ce>] lock_acquire+0x92/0xb8 [<0000000000345154>] _spin_lock+0x5c/0x9c [<0000000000202264>] do_IRQ+0x124/0x1f0 [<0000000000026610>] io_return+0x0/0x8 irq event stamp: 847 hardirqs last enabled at (847): [<000000000007aca6>] trace_hardirqs_on+0x2a/0x38 hardirqs last disabled at (846): [<0000000000076ca2>] trace_hardirqs_off+0x2a/0x38 softirqs last enabled at (0): [<000000000004909e>] copy_process+0x43e/0x11f4 softirqs last disabled at (0): [<0000000000000000>] 0x0 other info that might help us debug this: 1 lock held by vol_id/2903: #0: (&bdev->bd_mutex){--..}, at: [<000000000010e0f4>] do_open+0x78/0x358 stack backtrace: CPU: 1 Not tainted 2.6.27 #1}, Process vol_id (pid: 2903, task: 000000003d4c0000, ksp: 000000003d4e3b10) 0400000000000000 000000003d4e3830 0000000000000002 0000000000000000 000000003d4e38d0 000000003d4e3848 000000003d4e3848 00000000000168a8 0000000000000000 000000003d4e3b10 0000000000000000 0000000000000000 000000003d4e3830 000000000000000c 000000003d4e3830 000000003d4e38a0 000000000034aa98 00000000000168a8 000000003d4e3830 000000003d4e3880 Call Trace: ([<000000000001681c>] show_trace+0x138/0x158) [<0000000000016902>] show_stack+0xc6/0xf8 [<00000000000170d4>] dump_stack+0xb0/0xc0 [<0000000000078810>] print_usage_bug+0x1e8/0x228 [<000000000007a71c>] mark_lock+0xb14/0xd24 [<000000000007cd5a>] __lock_acquire+0x792/0xa74 [<000000000007d0ce>] lock_acquire+0x92/0xb8 [<0000000000345154>] _spin_lock+0x5c/0x9c [<000003e00004c7a2>] tape_open+0x42/0x1a4 [tape] [<000003e00005185c>] tapeblock_open+0x98/0xd0 [tape] Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-28[S390] tape block: complete request with correct lockingFrank Munzert
__blk_end_request must be called with request queue lock held. We need to use blk_end_request rather than __blk_end_request. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-28[S390] qdio: remove incorrect memsetJan Glauber
Remove the memset since zeroing the string is not needed and use snprintf instead of sprintf. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-28[S390] qdio: prevent double qdio shutdown in case of I/O errorsJan Glauber
In case of I/O errors on a qdio subchannel qdio_shutdown may be called twice by the qdio driver and by zfcp. Remove the superfluous shutdown from qdio and let the upper layer driver handle the error condition. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-27net: convert more to %pMJohannes Berg
A number of places still use %02x:...:%02x because it's in debug statements or for no real reason. Make a few of them use %pM. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27qeth: avoid skb_under_panic for malformatted inbound dataUrsula Braun
To make the qeth driver more robust in case of malformatted inbound packets due to hardware problems, an additional check for OSN-card-type is added for OSN-type packets. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-27qeth: remove unnecessary support ckeck in sysfs route6Frank Blaschka
Removing this check improves usability because you do not have to set the device online to initially set ipv6 routing option. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-27qeth: fix offset error in non prealloc header pathFrank Blaschka
For the non preallocated qeth header code path we should not change the header length. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-27qeth: remove non-recover-thread checkingsUrsula Braun
IP-threads have been removed from the qeth driver. Only the recover-thread is left over. This makes checkings for non-recover threads superfluous. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-23Merge branch 'v28-range-hrtimers-for-linus-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits) hrtimers: add missing docbook comments to struct hrtimer hrtimers: simplify hrtimer_peek_ahead_timers() hrtimers: fix docbook comments DECLARE_PER_CPU needs linux/percpu.h hrtimers: fix typo rangetimers: fix the bug reported by Ingo for real rangetimer: fix BUG_ON reported by Ingo rangetimer: fix x86 build failure for the !HRTIMERS case select: fix alpha OSF wrapper select: fix alpha OSF wrapper hrtimer: peek at the timer queue just before going idle hrtimer: make the futex() system call use the per process slack value hrtimer: make the nanosleep() syscall use the per process slack hrtimer: fix signed/unsigned bug in slack estimator hrtimer: show the timer ranges in /proc/timer_list hrtimer: incorporate feedback from Peter Zijlstra hrtimer: add a hrtimer_start_range() function hrtimer: another build fix hrtimer: fix build bug found by Ingo hrtimer: make select() and poll() use the hrtimer range feature ...
2008-10-22Merge branch 'timers/range-hrtimers' into v28-range-hrtimers-for-linus-v2Thomas Gleixner
Conflicts: kernel/time/tick-sched.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-21[PATCH] sanitize blkdev_get() and friendsAl Viro
* get rid of fake struct file/struct dentry in __blkdev_get() * merge __blkdev_get() and do_open() * get rid of flags argument of blkdev_get() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] pass fmode_t to blkdev_put()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch tape_blockAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch dcssblkAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch dasdAl Viro
->compat_ioctl() actually had been useless here; generic logics works fine. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] beginning of methods conversionAl Viro
To keep the size of changesets sane we split the switch by drivers; to keep the damn thing bisectable we do the following: 1) rename the affected methods, add ones with correct prototypes, make (few) callers handle both. That's this changeset. 2) for each driver convert to new methods. *ALL* drivers are converted in this series. 3) kill the old (renamed) methods. Note that it _is_ a flagday; all in-tree drivers are converted and by the end of this series no trace of old methods remain. The only reason why we do that this way is to keep the damn thing bisectable and allow per-driver debugging if anything goes wrong. New methods: open(bdev, mode) release(disk, mode) ioctl(bdev, mode, cmd, arg) /* Called without BKL */ compat_ioctl(bdev, mode, cmd, arg) locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-17Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: remove __generic_unplug_device() from exports block: move q->unplug_work initialization blktrace: pass zfcp driver data blktrace: add support for driver data block: fix current kernel-doc warnings block: only call ->request_fn when the queue is not stopped block: simplify string handling in elv_iosched_store() block: fix kernel-doc for blk_alloc_devt() block: fix nr_phys_segments miscalculation bug block: add partition attribute for partition number block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT softirq: Add support for triggering softirq work on softirqs.
2008-10-17Merge commit 'linus/master' into merge-linusArjan van de Ven
Conflicts: arch/x86/kvm/i8254.c
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits) [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n libiscsi: fix locking in iscsi_eh_device_reset libiscsi: check reason why we are stopping iscsi session to determine error value [SCSI] iscsi_tcp: return a descriptive error value during connection errors [SCSI] libiscsi: rename host reset to target reset [SCSI] iscsi class: fix endpoint id handling [SCSI] libiscsi: Support drivers initiating session removal [SCSI] libiscsi: fix data corruption when target has to resend data-in packets [SCSI] sd: Switch kernel printing level for DIF messages [SCSI] sd: Correctly handle all combinations of DIF and DIX [SCSI] sd: Always print actual protection_type [SCSI] sd: Issue correct protection operation [SCSI] scsi_error: fix target reset handling [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted [SCSI] scsi_dh_alua: remove REQ_NOMERGE [SCSI] lpfc 8.2.8 : update driver version to 8.2.8 [SCSI] lpfc 8.2.8 : Add MSI-X support [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED ...
2008-10-17blktrace: pass zfcp driver dataStefan Raspl
This patch writes the channel and fabric latencies in nanoseconds per request via blktrace for later analysis. The utilization of the inbound and outbound adapter queue is also reported. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits) UIO: Fix mapping of logical and virtual memory UIO: add automata sercos3 pci card support UIO: Change driver name of uio_pdrv UIO: Add alignment warnings for uio-mem Driver core: add bus_sort_breadthfirst() function NET: convert the phy_device file to use bus_find_device_by_name kobject: Cleanup kobject_rename and !CONFIG_SYSFS kobject: Fix kobject_rename and !CONFIG_SYSFS sysfs: Make dir and name args to sysfs_notify() const platform: add new device registration helper sysfs: use ilookup5() instead of ilookup5_nowait() PNP: create device attributes via default device attributes Driver core: make bus_find_device_by_name() more robust usb: turn dev_warn+WARN_ON combos into dev_WARN debug: use dev_WARN() rather than WARN_ON() in device_pm_add() debug: Introduce a dev_WARN() function sysfs: fix deadlock device model: Do a quickcheck for driver binding before doing an expensive check Driver core: Fix cleanup in device_create_vargs(). Driver core: Clarify device cleanup. ...
2008-10-16misc: replace __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16device create: s390: convert device_create_drvdata to device_createGreg Kroah-Hartman
Now that device_create() has been audited, rename things back to the original call to be sane. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: qlge: Fix page size ifdef test. net: Rationalise email address: Network Specific Parts dsa: fix compile bug on s390 netns: mib6 section fixlet enic: Fix Kconfig headline description de2104x: wrong MAC address fix s390: claw compile fixlet net: export genphy_restart_aneg cxgb3: extend copyrights to 2008 cxgb3: update driver version net/phy: add missing kernel-doc pktgen: fix skb leak in case of failure mISDN/dsp_cmx.c: fix size checks misdn: use nonseekable_open() net: fix driver build errors due to missing net/ip6_checksum.h include
2008-10-13s390: claw compile fixletAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-13fs3270: Correct error returnsAlan Cox
Drop the kernel lock further and also correct cases where we set rc to an error code, and then return 0 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13fs3270: remove extra locksAlan Cox
get_current_tty now does internal locking and returns a referenced object, thus our use of tty_mutex here can go away. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13tty: Redo current tty lockingAlan Cox
Currently it is sometimes locked by the tty mutex and sometimes by the sighand lock. The latter is in fact correct and now we can hand back referenced objects we can fix this up without problems around sleeping functions. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13tty: Make get_current_tty use a krefAlan Cox
We now return a kref covered tty reference. That ensures the tty structure doesn't go away when you have a return from get_current_tty. This is not enough to protect you from most of the resources being freed behind your back - yet. [Updated to include fixes for SELinux problems found by Andrew Morton and an s390 leak found while debugging the former] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13[SCSI] block: separate failfast into multiple bits.Mike Christie
Multipath is best at handling transport errors. If it gets a device error then there is not much the multipath layer can do. It will just access the same device but from a different path. This patch breaks up failfast into device, transport and driver errors. The multipath layers (md and dm mutlipath) only ask the lower levels to fast fail transport errors. The user of failfast, read ahead, will ask to fast fail on all errors. Note that blk_noretry_request will return true if any failfast bit is set. This allows drivers that do not support the multipath failfast bits to continue to fail on any failfast error like before. Drivers like scsi that are able to fail fast specific errors can check for the specific fail fast type. In the next patch I will convert scsi. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits) myri10ge: update driver version number to 1.4.3-1.369 r8169: add shutdown handler r8169: preliminary 8168d support r8169: support additional 8168cp chipset r8169: change default behavior for mildly identified 8168c chipsets r8169: add a new 8168cp flavor r8169: add a new 8168c flavor (bis) r8169: add a new 8168c flavor r8169: sync existing 8168 device hardware start sequences with vendor driver r8169: 8168b Tx performance tweak r8169: make room for more specific 8168 hardware start procedure r8169: shuffle some registers handling around (8168 operation only) r8169: new phy init parameters for the 8168b r8169: update phy init parameters r8169: wake up the PHY of the 8168 af_key: fix SADB_X_SPDDELETE response ath9k: Fix return code when ath9k_hw_setpower() fails on reset ath9k: remove nasty FAIL macro from ath9k_hw_reset() gre: minor cleanups in netlink interface gre: fix copy and paste error ...
2008-10-10[S390] 3215: Remove tasklet.Heiko Carstens
The 3215 console irq handler used to schedule a tasklet. However the console irq handler also gets called from the infamous cio_tpi() function. Which in turn does something like local_bh_disable() [call console irq handler] _local_bh_enable() _local_bh_enable() prevents execution of softirqs, which is intended within cio_tpi(). However there might be a new softirq pending because irq handler scheduled a tasklet. In order to prevent this behaviour we just get rid of the tasklet. It's not doing much anyway. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] console flush on panic / rebootHolger Smolinski
The s390 console drivers use the unblank callback of the console structure to flush the console buffer. In case of a panic or a reboot the CPU doing the callback can block on the console i/o. The other CPUs in the system continue to work. For panic this is not a good idea. Replace the unblank callback with proper panic/reboot notifier. These get called after all but one CPU have been stopped. Signed-off-by: Holger Smolinski <Holger.Smolinski@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] Add ioctl support for EMC Symmetrix Subsystem Control I/ONigel Hislop
EMC Symmetrix Subsystem Control I/O through CKD dasd requires a specific parameter list sent to the array via a Perform Subsystem Function CCW. The Symmetrix response is retrieved from the array via a Read Subsystem Data CCW. Signed-off-by: Nigel Hislop <hislop_nigel@emc.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] xpram: per device block request queues.Martin Schwidefsky
The xpram driver uses a single block device queue for all of its devices so far. With recent kernels removing xpram module fails to clean up all sysfs files. The next time the xpram module is loaded you'll get warnings: WARNING: at fs/sysfs/dir.c:463 sysfs_add_one+0x5e/0x64() sysfs: duplicate filename '35:0' can not be created Modules linked in: xpram(+) [last unloaded: xpram] Followed by the usual WARN_ON output, followed by an error message from kobject_add_internal, followed by a badness in genhd. Allocating a block queue per device fixes this. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] dasd: fix message flood for unsolicited interruptsStefan Haberland
In the unsolicited interupt handler fake IRBs from CIO have to be ignored because there is nothing to do. The function dump_sense should not be called if there is no sense data available. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] Move private simple udelay function to arch/s390/lib/delay.c.Heiko Carstens
Move cio's private simple udelay function to lib/delay.c and turn it into something much more readable. So we have all implementations at one place. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] dcssblk: add >2G DCSSs support and stacked contiguous DCSSs support.Hongjie Yang
The DCSS block device driver is modified to add >2G DCSSs support and allow a DCSS block device to map to a set of contiguous DCSSs. The extmem code is also modified to use new Diagnose x'64' subcodes for >2G DCSSs. Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] qdio enhanced SIGA (iqdio) support.Klaus-Dieter Wacker
Add support for z10 HiperSockets multiwrite SBALs on output queues. This is used on LPAR with EDDP enabled devices. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] cio: fix cio_tpi.Heiko Carstens
In cio_tpi only disable bottom halves when not in interrupt context. Otherwise a WARN_ON gets triggered. Besides that, when we are in interrupt context bottom halves are disabled anyway. Fixes this one: Badness at kernel/softirq.c:77 Modules linked in: CPU: 2 Not tainted 2.6.26 #4 Process swapper (pid: 0, task: 000000003fe83db0, ksp: 000000003fea7d28) Krnl PSW : 0404c00180000000 0000000000053f4e (__local_bh_disable+0xbe/0xcc) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000008ee0 00000000005f95e0 0000000000000000 0000000000000001 000000000020be92 0000000000000000 0000000000000210 00000000005d36c0 000000003fb5f4d8 0000000000000000 000000000020bed0 000000003fb5f3c8 00000000009be920 0000000000364898 000000003fb5f408 000000003fb5f3c8 Krnl Code: 0000000000053f42: bf2f1000 icm %r2,15,0(%r1) 0000000000053f46: a774ffc5 brc 7,53ed0 0000000000053f4a: a7f40001 brc 15,53f4c >0000000000053f4e: a7280001 lhi %r2,1 0000000000053f52: 50201000 st %r2,0(%r1) 0000000000053f56: a7f4ffbd brc 15,53ed0 0000000000053f5a: 0707 bcr 0,%r7 0000000000053f5c: a7f13fc0 tmll %r15,16320 Call Trace: ([<0000000000000210>] 0x210) [<0000000000053f86>] local_bh_disable+0x2a/0x38 [<000000000020bed0>] wait_cons_dev+0xd4/0x154 [<0000000000247cb2>] raw3215_make_room+0x6a/0x1a8 [<000000000024861a>] raw3215_write+0x86/0x28c [<00000000002488a0>] con3215_write+0x80/0x110 [<000000000004c3e0>] __call_console_drivers+0xc8/0xe4 [<000000000004c47e>] _call_console_drivers+0x82/0xc4 [<000000000004c744>] release_console_sem+0x218/0x2c0 [<000000000004cf64>] vprintk+0x3c0/0x504 [<0000000000354a4a>] printk+0x52/0x64 [<0000000000088004>] __print_symbol+0x40/0x50 [<0000000000071dbc>] print_stack_trace+0x78/0xac [<0000000000079e78>] print_lock_dependencies+0x148/0x208 [<000000000007a050>] print_irq_inversion_bug+0x118/0x15c [<000000000007a106>] check_usage_forwards+0x72/0x84 [<000000000007a36e>] mark_lock+0x1d2/0x594 [<000000000007baca>] __lock_acquire+0x886/0xf48 [<000000000007c234>] lock_acquire+0xa8/0xe0 [<0000000000350316>] _write_lock+0x56/0x98 [<000000000026cd92>] zfcp_erp_adapter_reopen+0x4e/0x8c [<000000000026f1e8>] zfcp_qdio_int_resp+0x2e4/0x2f4 [<00000000002210f4>] qdio_int_handler+0x274/0x888 [<00000000002177b6>] ccw_device_call_handler+0x6e/0xd8 [<0000000000215336>] ccw_device_irq+0xd6/0x160 [<0000000000212f88>] io_subchannel_irq+0x8c/0x118 [<000000000020c120>] do_IRQ+0x1d0/0x1fc [<00000000000270b2>] io_return+0x0/0x8 [<000000000001c8a4>] cpu_idle+0x178/0x21c ([<000000000001c884>] cpu_idle+0x158/0x21c) [<00000000003483a2>] start_secondary+0xb6/0xc8 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000000000053f4a>] __local_bh_disable+0xba/0xcc Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] cio: Correct use of ! and &Julia Lawall
In commit e6bafba5b4765a5a252f1b8d31cbf6d2459da337, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. In particular, the result of !scsw_stctl(&request->irb.scsw) & SCSW_STCTL_STATUS_PEND is always just !scsw_stctl(&request->irb.scsw). The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; constant C; @@ ( !E & !C | - !E & C + !(E & C) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] cio: inline assembly cleanupPeter Oberparleiter
Fix incorrect in- and output constraints, remove volatile declaration of inline assembly parameters and reformat constraint declarations to be more consistent. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] bus_id -> dev_set_name() for css and ccw bussesCornelia Huck
Convert remaining s390 users setting bus_id to dev_set_name() or init_name. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] bus_id ->dev_name() conversions in qdioMartin Schwidefsky
Use dev_name() in the new qdio driver. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] Use s390_root_dev_* in kvm_virtio.Cornelia Huck
No need to define a static device for the kvm_s390 root device, just use s390_root_dev_register(). This is needed for the bus_id rework Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] more bus_id -> dev_name conversionsCornelia Huck
Some further bus_id -> dev_name() conversions in s390 code. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] bus_id -> dev_set_name() changesCornelia Huck
Convert most s390 users setting bus_id to dev_set_name(). css and ccw busses are deferred since they need some special treatment. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>