aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/aacraid
AgeCommit message (Collapse)Author
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-24[PATCH] missing include (free_irq() use)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-23[SCSI] aacraid: remove scsi_remove_deviceMark Haverkamp
Received from Mark Salyzyn: Until the system is stabilized, I am suggesting the enclosed modification to prevent the driver from tickling the panic. Once sysfs and friends are stabilized, the patch may be backed out. We have yet to evaluate if we really want to relinquish existing Scsi Devices in any case, holding on to them as configuration of arrays comes and goes makes some sense as well. As a result, we have opted to pull the lines rather than comment them in legacy. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aacraid: merge rx and rkt codeMark Haverkamp
Received from Mark Salyzyn: The only real difference between the rkt and rx platform modules is the offset of the message registers. This patch recognizes this similarity and simplifies the driver to reduce it's code footprint and to improve maintainability by reducing the code duplication. Visibly, the 'rkt.c' portion of this patch looks more complicated than it really is. View it as retaining the rkt-only specifics of the interface. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aacraid: expose physical devicesMark Haverkamp
Received from Mark Salyzyn: I am placing this functionality into an insmod parameter. Normally the physical components are exported to sg, and are blocked from showing up in sd. Note that the pass-through I/O path via the driver through the Firmware to the physical disks is not an optimized path, the card is designed for Hardware RAID, elevator sorting and caching. This should not be used as a means for utilizing the aacraid based controllers as a generic scsi/SATA/SAS controller, performance should suck by a few percentage points, any RAID meta-data on the drives will confuse the controller about who owns the drives and there is a high risk of destroying content in both directions. Unreliable and for experimentation or strange controlled circumstances only. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aacraid: misc cleanupMark Haverkamp
Received from Mark Salyzyn: Basically cleanup, nothing here will have an affect. Adjusting some error codes, removing superfluous definitions and code fragments. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] aacraid: Reset adapter in recovery timeoutMark Haverkamp
Received from Mark Salyzyn If the adapter is in blinkled (Firmware Assert) when error recovery timeout actions have been triggered, perform an adapter warm reset and restart the initialization. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] aacraid: Check for unlikely errorsMark Haverkamp
Received from Mark Salyzyn The enclosed patch cleans up some code fragments, adds some paranoia (unproven causes of potential driver failures). Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] aacraid: Restart adapter on firmware assert (Update 2)Mark Haverkamp
Received from Mark Salyzyn If the adapter should be in a blinkled (Firmware Assert) state when the driver loads, we will perform a warm restart of the Adapter Firmware to see if we can rescue the adapter. Possible causes of a blinkled can occur on some early release motherboard BIOSes, transitory PCI bus problems on embedded systems or non-x86 based architectures, transitory startup failures of early release drives or transitory hardware failures; some of which can bite the adapter later at runtime. Future enhancements will include recovery during runtime. Fixed extra whitespace space issue. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] aacraid: interruptible ioctlMark Haverkamp
Received from Mark Salyzyn This patch allows the FSACTL_SEND_LARGE_FIB, FSACTL_SENDFIB and FSACTL_SEND_RAW_SRB ioctl calls into the aacraid driver to be interruptible. Only necessary if the adapter and/or the management software has gone into some sort of misbehavior and the system is being rebooted, thus permitting the user management software applications to be killed relatively cleanly. The FIB queue resource is held out of the free queue until the adapter finally, if ever, completes the command. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-03Merge ../scsi-misc-2.6James Bottomley
Conflicts: drivers/scsi/nsp32.c drivers/scsi/pcmcia/nsp_cs.c Removal of randomness flag conflicts with SA_ -> IRQF_ global replacement. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-02[PATCH] irq-flags: scsi: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[SCSI] aacraid: remove x86_64 IOMMU dependent codeSalyzyn, Mark
This may seem like a DILLIGAF, but after chatting with the F/W folks, there is no harm in dropping the page calculation as denoted in the enclosed patch for these older adapters in this new age of 4GB+ memory sticks. Any resource optimization within the old-old-old adapters for systems with less than 4G of memory is of little consequence. The existing AAC_QUIRK_31BIT flag in linit.c should look after the rest of the legacy hardware DMA limitations. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[PATCH] x86_64: Rename IOMMU option, fix help and mark option embedded.Andi Kleen
- Rename the GART_IOMMU option to IOMMU to make clear it's not just for AMD - Rewrite the help text to better emphatise this fact - Make it an embedded option because too many people get it wrong. To my astonishment I discovered the aacraid driver tests this symbol directly. This looks quite broken to me - it's an internal implementation detail of the PCI DMA API. Can the maintainer please clarify what this test was intended to do? Cc: linux-scsi@vger.kernel.org Cc: alan@redhat.com Cc: markh@osdl.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] More BUG_ON conversionEric Sesterhenn
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-19[SCSI] aacraid: small misc. cleanupsMark Haverkamp
Received from Mark Salyzyn Spelling correction, orphaned comment removal & update branch name. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-19[SCSI] aacraid: Update supported product informationMark Haverkamp
Received From Mark Salyzyn Some of the cards product names changed. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-12[SCSI] aacraid: Fix return code interpretationMark Haverkamp
Received from Mark Salyzyn clear_user return is 0 for success, the code fragment is written to assume that it is the count of the number of bytes zero'd. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10[SCSI] drivers/scsi: Use ARRAY_SIZE macroTobias Klauser
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of the macro. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-06[SCSI] fix up request buffer reference in various scsi driversChristoph Hellwig
Various scsi drivers use scsi_cmnd.buffer and scsi_cmnd.bufflen in their queuecommand functions. Those fields are internal storage for the midlayer only and are used to restore the original payload after request_buffer and request_bufflen have been overwritten for EH. Using the buffer and bufflen fields means they do very broken things in error handling. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20[SCSI] aacraid: remove unneeded listMark Haverkamp
Received From Mark Salyzyn The queue tracking is just not being used, not even for debugging. Information about outstanding commands can be acquired from the scsi structures. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20[SCSI] aacraid: sa race condition fixMark Haverkamp
Received From Mark Salyzyn A race condition existed that could result in a lost completion of a command to the ppc based cards. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20[SCSI] aacraid: adjustable timeoutsMark Haverkamp
Received From Mark Salyzyn Add the ability to adjust for unusual corner case failures. Both of these additional module parameters deal with embedded, non-intel or complicated system scenarios. Aif_timeout can be increased past the default 2 minute timeout to drop application registrations when a system has an unusually high event load resulting from continuing management requests, or simultaneous builds, or sluggish user space as a result of system load. Startup_timeout can be increased past the default 3 minute timeout to drop an adapter initialization for systems that have a very large number of targets, or slow to spin-up targets, or a complicated set of array configurations that extend the time for the firmware to declare that it is operational. This timeout would only have an affect on non-intel based systems, as the (more patient) BIOS would generally be where the startup delay would be dealt with. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20[SCSI] aacraid: optimize sg allocMark Haverkamp
Received From Mark Salyzyn Slight space and speed efficiency improvement. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20[SCSI] aacraid: remove unneeded lockingMark Haverkamp
Received From Mark Salyzyn Since new commands to the card are quiesced, respect the changes in the SCSI error path which dropped locking around the hba reset handler and similarly drop the lock requirement in the driver's path. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Driver version updateMark Haverkamp
Received from Mark Salyzyn Fix module param Update driver version. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Fix parenthesis placement errorMark Haverkamp
Received from Mark Salyzyn On 64 bit machines, when a 32 bit application tries to acquire the AIF, they will always get and EFAULT error response from the driver. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Show max channel and max id is sysfsMark Haverkamp
Received from Mark Salyzyn Add max_channel and max_id sysfs parameters. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Re-start helper thread if it diesMark Haverkamp
Received from Mark Salyzyn Since the helper thread for the driver can be killed unceremoniously by an application, we detect the loss of the helper and restart it. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: General driver cleanupMark Haverkamp
Received from Mark Salyzyn Remove superfluous code, optimize code, harden code, cast code, correct some text, use msleep instead of schedule_timeout_interruptible. No bugs. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Fix extra unregister_chrdevMark Haverkamp
Received from Mark Salyzyn If there are no aacraid controllers, we do not create the raid controller chrdev, thus when the driver is unloaded it performs a superfluous deregistration. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Fix error in max_channel fieldMark Haverkamp
Received from Mark Salyzyn The max_channel field is set one too large. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Error path cleanupMark Haverkamp
Received from Mark Salyzyn Some of the error return paths during initialization resulted in a zero report to caller Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Add timeout for eventsMark Haverkamp
Received from Mark Salyzyn Plug and play actions resulting from event sequences shall time out if they take longer than 30 seconds to complete. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Track command ownership in driverMark Haverkamp
Received from Mark Salyzyn The loss of the ownership flags, despite their flaws, in the scsi command were sorely missed and are reinstated more accurately in the aacraid driver to track commands and permit us to properly handle error recovery actions. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Use scmd_ functionsMark Haverkamp
Received from Mark Salyzyn Clean up the remaining scsi id access methods, drop ID_LUN_TO_CONTAINER macro. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-28[PATCH] Replace 0xff.. with correct DMA_xBIT_MASKMatthias Gehre
Replace all occurences of 0xff.. in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h. Signed-off-by: Matthias Gehre <M.Gehre@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-27[SCSI] aacraid: use kthread_ APIChristoph Hellwig
Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Salyzyn, Mark <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-16Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
2006-02-07[PATCH] bogus asm/delay.h includesAl Viro
asm/delay.h is non-portable; linux/delay.h should be used in generic code. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-04[SCSI] aacraid: use no_uld_attach flagMark Haverkamp
Received From Mark Salyzyn. In order to support user tools accessing the array components (SMART, Mode Page information, Cache page adjustments, WWN determination, Firmware updates etc), we take advantage of the no_uld_attach flag and deprecate the code that filters Inquiries to block the requests to array components. The quirk prevents the sd layer from attaching to the components. We also took the opportunity to balance the queue depths based on the total adapter queue depth to the array devices to reduce the chances of starvation. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] aacraid: Update global function namesMark Haverkamp
Received from Mark Salyzyn, Reduce the possibility of namespace collision. Prefix with aac_. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] aacraid: reduce device probe warningsMark Haverkamp
Received from Mark Salyzyn. This patch sets up some device quirks surrounding arrays to inform the scsi layer that various mode pages are not supported. This reduces the severity of the complaints that show up in the logs as the array devices are enumerated. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-12[SCSI] aacraid: README updateMark Haverkamp
Received From Mark Salyzyn. Move the README from the driver directory to the Documentation directory. Updated the documentation, added descriptions for cards that were missing. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-12[SCSI] aacraid: 17 element sg performance updateMark Haverkamp
Received From Mark Salyzyn. The Jaguar and Corsair class of adapters (2410, 2810, 2610, 21610, CERC) perform better (about 10% better read performance, write performance neutral) with current Firmware if the OS limits the number of scatter gather elements to 17 per request. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-12[SCSI] aacraid: better sysfs adapter informationMark Haverkamp
Received from Mark Salyzyn. Provide more accurate adapter information. Allows the Adapter Firmware to override the Adapter product information. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-12[SCSI] aacraid: Fix default FIB sizeMark Haverkamp
Received from Mark Salyzyn. If the adapter has not instructed us otherwise that it can handle a 'large' FIB, then it can handle at most a 2KB FIB. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-10[PATCH] don't include ioctl32.h in driversChristoph Hellwig
These days ioctl32.h is only used for communication of fs/compat.c and fs/compat_ioctl.c and doesn't contain anything of interest to drivers. Remove inclusion in various drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-01[SCSI] aacraid: Check scsi_bios_ptabe return codeMark Haverkamp
Received from Mark Salyzyn. scsi_bios_ptable return value is not being checked in aac_biosparm. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] aacraid: Fix read capacity 16 return dataMark Haverkamp
Received from Mark Salyzyn. The return data from a read capacity 16 needs to have RTO_EN and PROT_EN zeroed out. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>