aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/aic94xx
AgeCommit message (Collapse)Author
2007-05-22[SCSI] aic94xx: asd_clear_nexus should fail if the cleared task does not ↵Darrick J. Wong
complete Every so often, the driver will call asd_clear_nexus to clean out a task. It is supposed to be the case that the CLEAR NEXUS does not go on the done list until after the task itself has been put on the done list, but for some reason this doesn't always happen. Thus, the wait_for_completion_timeout call times out, and we return success. This makes libsas free the task even though the task hasn't completed, leading to a BUG_ON message from aic94xx_hwi.c around line 341. We should return failure from asd_clear_nexus so that libsas tries again; at a bare minimum it shouldn't be freeing active tasks. I _think_ this will fix one of the SCB timeout crash problems (though I've not been able to reproduce it lately...) Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-09Fix occurrences of "the the "Michael Opdenacker
Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-02PCI: Cleanup the includes of <linux/pci.h>Jean Delvare
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16[SCSI] aic94xx: tie driver to the major number of the sequencer firmwareJames Bottomley
The sequencer firmware file has both a string (currently showing V17/10c6) and a number (currently set to 1.1). It has become apparent that Adaptec may issue sequencer firmware in the future which could be incompatible with the current driver. Therefore, the driver will be tied to the particular major number of the firmware (i.e. the current driver will load any 1.x firmware). Additionally, the driver will print out both the ascii string and the major number, so with this pach the current firmware will print out aic94xx: Found sequencer firmware version 1.1 (V17/10c6) Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-14[PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (97 commits) [SCSI] zfcp: removed wrong comment [SCSI] zfcp: use of uninitialized variable [SCSI] zfcp: Invalid locking order [SCSI] aic79xx: use dma_get_required_mask() [SCSI] aic79xx: fix bracket mismatch in unused macro [SCSI] BusLogic: Replace 'boolean' by 'bool' [SCSI] advansys: clean up warnings [SCSI] 53c7xx: brackets fix in uncompiled code [SCSI] nsp_cs: remove old scsi code [SCSI] aic79xx: make ahd_match_scb() static [SCSI] DAC960: kmalloc->kzalloc/Casting cleanups [SCSI] scsi_kmap_atomic_sg(): check that local irqs are disabled [SCSI] Buslogic: local_irq_disable() is redundant after local_irq_save() [SCSI] aic94xx: update for v28 firmware [SCSI] scsi_error: Fix lost EH commands [SCSI] aic94xx: Add default bus reset handler [SCSI] aic94xx: Remove TMF result code munging [SCSI] libsas: Add an LU reset mechanism to the error handler [SCSI] libsas: Don't BUG when connecting two expanders via wide port [SCSI] st: fix Tape dies if wrong block size used, bug 7919 ...
2007-02-11[PATCH] Transform kmem_cache_alloc()+memset(0) -> kmem_cache_zalloc().Robert P. J. Day
Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the corresponding "kmem_cache_zalloc()" call. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Roland McGrath <roland@redhat.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Acked-by: Joel Becker <Joel.Becker@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Jan Kara <jack@ucw.cz> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-03[SCSI] aic94xx: update for v28 firmwareWu, Gilbert
These changes work compatibly with the old V17 firmware Contribution: Ed Chim <ed_chim@adaptec.com> Gilbert Wu <gilbert_wu@adaptec.com> Change Log: 1. Use dword instead of qword to display the value of Connection State register for debug purpose. 2. There are some registers location of AIC94xx chip has been changed according to the new V28 firmware. The patch has redefined the register location and provided initialization. 3. The new sequencer firmware v28 for Aic94xx SAS/SATA Linux open source device driver can be downloaded from http://www.adaptec.com/NR/exeres/35B611BC-9789-4B5B-82C6-85A2CCA8A46A.htm Signed-off-by: Gilbert Wu <gilbert_wu@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-03[SCSI] aic94xx: Add default bus reset handlerDarrick J. Wong
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-03[SCSI] aic94xx: Remove TMF result code mungingDarrick J. Wong
In asd_initiate_ssp_tmf, the TMF result code is replaced with TMF_RESP_FUNC_FAILED except when the TMF returns a result code immediately. However, TMFs can return result codes via an ESCB... yet these codes are also replaced with "FAILED". The only values that can fall into that case are TMF_* codes anyway, so get rid of this code where COMPLETE and SUCCESS are turned into FAILED. This also lets us propagate those TMF_* codes up to the caller. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-27[SCSI] aic94xx: Register eh_device_reset_handlerDarrick J. Wong
Register libsas's default device reset code with the scsi. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-27[SCSI] aic94xx: fix typos and update verison numberAlexis Bruemmer
fix typos and bump version number Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Alexis Bruemmer <alexisb@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] aic94xx: Scan SAS devices asynchronouslyDarrick J. Wong
Add the necessary hooks to the aic94xx driver to support the asynchronous SCSI device scan infrastructure. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] aic94xx: Lock DDB read/write accessesDarrick J. Wong
Extend the use of the DDB lock to include all DDB accesses, because DDB updates now occur from multiple threads. This fixes the SMP timeout problems that we were occasionally seeing with a x260, because the controller got confused when the DDBs got corrupted. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] aic94xx: Fix DDB and SCB initializationDarrick J. Wong
Ed Chim of Adaptec informs us that the DDB registers need to be zeroed at initialization time and that some SCB initializations need to happen even if we don't use the SCB. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] aic94xx: Match request_firmware with release_firmwareDarrick J. Wong
The vmalloc() blob holding the sequencer firmware wasn't being released at module unload time, which resulted in a memory leak. Signed-off-by: Alexis Bruemmer <alexisb@us.ibm.com> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] aic94xx: Remove workqueue code from REQ_TASK_ABORT/REQ_DEVICE_RESET codeDarrick J. Wong
Now that task aborts and device port resets are done by the EH, we can remove all the code that set up workqueues and such and simply call sas_task_abort and let libsas figure things out. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] aic94xx: Don't eat TMF_QUERY_TASK resultsDarrick J. Wong
In this driver, TMF_QUERY_TASK translates to QUERY_SSP_TASK. The sequencer, it seems, is perfectly happy sending us a SSP response, which this function promptly "converts" into TMF_RESP_FUNC_FAILED. This leads to the SAS EH making bad decisions based on bad data, so we should not perform the conversion in this case. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] aic94xx: Set lldd_max_execute_num in sas_haDarrick J. Wong
The aic94xx module has a parameter that looks like it should set lldd_max_execute_num in the sas_ha, but it never sets this value. Either we should set it or remove the parameter. This allows us to enable task collector mode for this driver, though it is still off by default. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] libsas: Don't give scsi_cmnds to the EH if they never made it to the ↵Darrick J. Wong
SAS LLDD or have already returned On a system with many SAS targets, it appears possible that a scsi_cmnd can time out without ever making it to the SAS LLDD or at the same time that a completion is occurring. In both of these cases, telling the LLDD to abort the sas_task makes no sense because the LLDD won't know about the sas_task; what we really want to do is to increase the timer. Note that this involves creating another sas_task bit to indicate whether or not the task has been sent to the LLDD; I could have implemented this by slightly redefining SAS_TASK_STATE_PENDING, but this way seems cleaner. This second version amends the aic94xx portion to set the TASK_AT_INITIATOR flag for all sas_tasks that were passed to lldd_execute_task. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06Actually update the fixed up compile failures.David Howells
Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (73 commits) [SCSI] aic79xx: Add ASC-29320LPE ids to driver [SCSI] stex: version update [SCSI] stex: change wait loop code [SCSI] stex: add new device type support [SCSI] stex: update device id info [SCSI] stex: adjust default queue length [SCSI] stex: add value check in hard reset routine [SCSI] stex: fix controller_info command handling [SCSI] stex: fix biosparam calculation [SCSI] megaraid: fix MMIO casts [SCSI] tgt: fix undefined flush_dcache_page() problem [SCSI] libsas: better error handling in sas_expander.c [SCSI] lpfc 8.1.11 : Change version number to 8.1.11 [SCSI] lpfc 8.1.11 : Misc Fixes [SCSI] lpfc 8.1.11 : Add soft_wwnn sysfs attribute, rename soft_wwn_enable [SCSI] lpfc 8.1.11 : Removed decoding of PCI Subsystem Id [SCSI] lpfc 8.1.11 : Add MSI (Message Signalled Interrupts) support [SCSI] lpfc 8.1.11 : Adjust LOG_FCP logging [SCSI] lpfc 8.1.11 : Fix Memory leaks [SCSI] lpfc 8.1.11 : Fix lpfc_multi_ring_support ...
2006-11-30Fix misc .c/.h comment typosMatt LaPlante
Fix various .c/.h typos in comments (no code changes). Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-22Merge ../scsi-rc-fixes-2.6James Bottomley
2006-11-22[SCSI] aic94xx: fix pointer to integer conversion warningJames Bottomley
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22[PATCH] aic94xx: delete ascb timers when freeing queuesDarrick J. Wong
When the aic94xx driver creates ascbs, each ascb is initialized with a timeout timer. If there are any ascbs left over when the driver is being torn down, these timers need to be deleted. In particular, we seem to hit this case when ascbs are issued yet never end up on the done list. Right now there's a sequencer bug that results in this happening every so often. CONTROL PHY commands are typically sent when things are really messed up with the sequencer; however, any other leftover ascb should produce loud warnings. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22[PATCH] aic94xx: handle REQ_DEVICE_RESETDarrick J. Wong
This patch implements a REQ_DEVICE_RESET handler for the aic94xx driver. Like the earlier REQ_TASK_ABORT patch, this patch defers the device reset to the Scsi_Host's workqueue, which has the added benefit of ensuring that the device reset does not happen at the same time that the abort tmfs are being processed. After the phy reset, the busted drive should go away and be re-detected later, which is indeed what I've seen on both a x260 and a x206m. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-15[SCSI] aic94xx: handle REQ_TASK_ABORTDarrick J. Wong
This patch straightens out the code that distinguishes the various escb opcodes in escb_tasklet_complete so that they can be handled correctly. It also provides all the necessary code to create a workqueue item that tells libsas to abort a sas_task. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09[SCSI] aic94xx SCSI timeout fixmalahal@us.ibm.com
The patch updates DDB0 in the aic94xx driver itself. It doesn't supply or use lldd_port_formed field. DDB0 is updated prior to posting notification to libsas layer. Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] aic94xx: Supermicro motherboards supportSergey Kononenko
Add PCI id. Plus correct for possibly missing resistor that can cause FLASHEX to have the wrong value. Signed-off-by: Sergey Kononenko <sergk@sergk.org.ua> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-04Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits) [SCSI] Initial Commit of qla4xxx [SCSI] raid class: handle component-add errors [SCSI] SCSI megaraid_sas: handle thrown errors [SCSI] SCSI aic94xx: handle sysfs errors [SCSI] SCSI st: fix error handling in module init, sysfs [SCSI] SCSI sd: fix module init/exit error handling [SCSI] SCSI osst: add error handling to module init, sysfs [SCSI] scsi: remove hosts.h [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog [SCSI] megaraid_sas: adds tasklet for cmd completion [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error [SCSI] megaraid_sas: function pointer for disable interrupt [SCSI] megaraid_sas: frame count optimization [SCSI] megaraid_sas: FW transition and q size changes [SCSI] qla2xxx: Update version number to 8.01.07-k2. [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked. [SCSI] qla2xxx: Add MODULE_FIRMWARE tags. [SCSI] qla2xxx: Add support for host port state FC transport attribute. [SCSI] qla2xxx: Add support for fabric name FC transport attribute. ...
2006-10-04[SCSI] SCSI aic94xx: handle sysfs errorsJeff Garzik
Handle and unwind from errors returned by driver model functions. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04Remove all inclusions of <linux/config.h>Dave Jones
kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
2006-09-26[SCSI] aic94xx: require firmware loaderMuli Ben-Yehuda
aic94xx relies on external firmware and thus requires FW_LOADER. Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-24[PATCH] fix idiocy in asd_init_lseq_mdp()Al Viro
To whoever had written that code: a) priority of >> is higher than that of & b) priority of typecast is higher than that of any binary operator c) learn the fscking C Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24[PATCH] SCSI gfp_t annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-23[SCSI] aic94xx: Fix for a typo in aic94xx_init()malahal@us.ibm.com
Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aic94xx: Removes Reliance on FLASH Manufacture IDsAlexis Bruemmer
This patch removes the reliance on FLASH Manufacture IDs for validation. Signed-off-by: Alexis Bruemmer <alexisb@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] aci94xx: implement link rate settingJames Bottomley
This patch implements the ability to set the minimum and maximum linkrates for both libsas (for expanders) and aic94xx (for the host phys). It also tidies up the setting of the hardware min and max to make sure they're updated when the expander emits a change broadcast. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] SAS: consolidate linkspeed definitionsJames Bottomley
At the moment we have two separate linkspeed enumerations covering roughly the same values. This patch consolidates on a single one enum sas_linkspeed in scsi_transport_sas.h and uses it everywhere in the aic94xx driver. Eventually I'll get around to removing the duplicated fields in asd_sas_phy and sas_phy ... Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-30[SCSI] aic94xx: Increase can_queue for better performanceDarrick J. Wong
This patch sets can_queue in the aic94xx driver's scsi_host to better performing values than what's there currently. It seems that asd_ha->seq.can_queue reflects the number of requests that can be queued per controller; so long as there's one scsi_host per controller, it seems logical that the scsi_host ought to have the same can_queue value. To the best of my (still limited) knowledge, this method provides the correct value. The effect of leaving this value set to 1 is terrible performance in the case of either (a) certain Maxtor SAS drives flying solo or (b) flooding several disks with I/O simultaneously (md-raid). There may be more scenarios where we see similar problems that I haven't uncovered. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-30[SCSI] aic94xx: add MODULE_FIRMWARE tagJames Bottomley
Add a tag which shows what the firmware file we're requesting is. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29[SCSI] aic94xx: new driverJames Bottomley
This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>