aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/fcoe
AgeCommit message (Collapse)Author
2009-06-15Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-08[SCSI] fcoe: removes reserving memory for vlan_ethdr on tx pathVasu Dev
This is not required as VLAN header is added by device interface driver, this was causing bad FC_CRC in FCoE pkts when using VLAN interface. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] fcoe: removes fcoe_watchdogVasu Dev
Removes periodic fcoe_watchdog timer used across all fcoe interface maintained in fcoe_hostlist instead added new fcoe_queue_timer per fcoe interface. Added timer is armed only when some pending skb need to be flushed as oppose to periodic 1 second fcoe_watchdog, since now fcoe_queue_timer is used on demand thus set this to 2 jiffies. Now fcoe_queue_timer is much simple than fcoe_watchdog using lock to process all fcoe interface from fcoe_hostlist. I noticed +ve performance result with using 2 jiffies timer as this helps flushing fcoe_pending_queue quickly. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] fcoe: reduces lock cost when adding a new skb to fcoe_pending_queueVasu Dev
Currently fcoe_pending_queue.lock held twice for every new skb adding to this queue when already least one pkt is pending in this queue and that is not uncommon once skb pkts starts getting queued here upon fcoe_start_io => dev_queue_xmit failure. This patch moves most fcoe_pending_queue logic to fcoe_check_wait_queue function, this new logic grabs fcoe_pending_queue.lock only once to add a new skb instead twice as used to be. I think after this patch call flow around fcoe_check_wait_queue calling in fcoe_xmit is bit simplified with modified fcoe_check_wait_queue function taking care of adding and removing pending skb in one function. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] fcoe: use ETH_P_FIP for skb->protocol of FIP framesChris Leech
FIP frames should leave the fcoe layer with skb->protocol set to ETH_P_FIP, not ETH_P_802_3. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08[SCSI] libfcoe: fip: fix non-FIP-mode FLOGI state after reset.Joe Eykholt
When a reset is sent using fcoeadm on a non-FIP mode NIC, there's no link flap, so the fcoe_ctlr stays in non-FIP mode. In that case, FIP wasn't setting the flogi_oxid or map_dest flag, causing the FLOGI to be sent with the both wrong source MAC and the wrong destination MAC address, causing it to fail. This leads to a non-functioning HBA until a link flap or instance delete/create. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-29net: convert unicast addr listJiri Pirko
This patch converts unicast address list to standard list_head using previously introduced struct netdev_hw_addr. It also relaxes the locking. Original spinlock (still used for multicast addresses) is not needed and is no longer used for a protection of this list. All reading and writing takes place under rtnl (with no changes). I also removed a possibility to specify the length of the address while adding or deleting unicast address. It's always dev->addr_len. The convertion touched especially e1000 and ixgbe codes when the change is not so trivial. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 13 +-- drivers/net/e1000/e1000_main.c | 24 +++-- drivers/net/ixgbe/ixgbe_common.c | 14 ++-- drivers/net/ixgbe/ixgbe_common.h | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/ixgbe/ixgbe_type.h | 4 +- drivers/net/macvlan.c | 11 +- drivers/net/mv643xx_eth.c | 11 +- drivers/net/niu.c | 7 +- drivers/net/virtio_net.c | 7 +- drivers/s390/net/qeth_l2_main.c | 6 +- drivers/scsi/fcoe/fcoe.c | 16 ++-- include/linux/netdevice.h | 18 ++-- net/8021q/vlan.c | 4 +- net/8021q/vlan_dev.c | 10 +- net/core/dev.c | 195 +++++++++++++++++++++++++++----------- net/dsa/slave.c | 10 +- net/packet/af_packet.c | 4 +- 18 files changed, 227 insertions(+), 137 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-23[SCSI] libfc,fcoe,fnic: Separate rport and lport max retry countsAbhijeet Joglekar
This allows fnic to configure number of retries for lport and rport separately. Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com> Acked-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-20[SCSI] fcoe, libfc: fix function declarations to be ANSI-compliantRandy Dunlap
Fix function declarations: drivers/scsi/fcoe/fcoe.c:1356:28: warning: non-ANSI function declaration of function 'fcoe_dev_setup' drivers/scsi/libfc/fc_rport.c:1293:20: warning: non-ANSI function declaration of function 'fc_setup_rport' drivers/scsi/libfc/fc_rport.c:1302:23: warning: non-ANSI function declaration of function 'fc_destroy_rport' [jejb: fixed wrong doc in comment noticed during inspection] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/scsi/fcoe/fcoe.c
2009-05-17fcoe: adds spma mode supportVasu Dev
If we can find a type NETDEV_HW_ADDR_T_SAN mac address from the corresponding netdev for a fcoe interface then sets up added the fc->ctlr.spma flag and stores spma mode address in ctl_src_addr. In case the spma flag is set then:- 1. Adds spma mode MAC address in ctl_src_addr as secondary MAC address, the FLOGI for FIP and pre-FIP will go out using this address. 2. Cleans up stored spma MAC address in ctl_src_addr in fcoe_netdev_cleanup. 3. Sets up spma bit in fip_flags for FIP solicitations along with exiting FPMA bit setting. 4. Initialize the FLOGI FIP MAC descriptor to stored spma MAC address in ctl_src_addr. This is used as proposed FCoE MAC address from initiator along with both SPMA and FPMA bit set in FIP solicitation, in response the switch may grant any FPMA or SPMA mode MAC address to initiator. Removes FIP descriptor type checking against ELS type ELS_FLOGI in fcoe_ctlr_encaps to update a FIP MAC descriptor, instead now checks against FIP_DT_FLOGI. I've tested this with available FPMA-only FCoE switch but since data_src_addr is updated using same old code for both FPMA and SPMA modes with FIP or pre-FIP links, so added SPMA mode will work with SPMA-only switch also provided that switch grants a valid MAC address. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17fcoe: consolidates netdev related config and cleanup for spma modeVasu Dev
Currently fcoe_netdev_config adds netdev pkt handler for fcoe pkts, fcoe_if_create adds netdev pkt handler for fip packets, a secondary MAC address is added by fcoe_netdev_config and then later cleanup for these netdev related config/adds is done only during fcoe_if_destroy and no cleanup done on error during fcoe interface creation after above netdev config calling in fcoe_if_create. So this patch adds single func for above mentioned cleanup the fcoe_netdev_cleanup and then calls this func on either fcoe interface destroy or exiting from fcoe_if_create due to an error after fcoe/fip related above netdev config is done. Moved netdev pkt handler addition code blocks for fip pkts close to similar code block for foce pkt in fcoe_netdev_config, so that added fcoe_netdev_cleanup could be called on error from fcoe_netdev_config to undo these both additions for fcoe/fip pkt handlers. This move required reference to fcoe_fip_recv in fcoe_netdev_config, so moved fip related functions fcoe_fip_recv, fcoe_fip_send and fcoe_update_src_mac above fcoe_netdev_config. This consolidation will enable spma mode support in next patch to easily add or delete spma mode mac address beside fixing current no cleanup issue during error. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27[SCSI] fcoe: fip: add multicast filter to receive FIP advertisements.Joe Eykholt
The FCoE forwarder (FCF) would be selected, but then would soon time out after three advertisements were missed. This would be 24 seconds by default, or 3 times the keep-alive interval configured on the switch. The cause was that the multicast address for all FIP E-nodes was never added. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-27[SCSI] fcoe: fix spelling typos and bad commentsChris Leech
Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-27[SCSI] fcoe: don't export functions that are internal to fcoeChris Leech
These probably never should have been exported. If they were needed outside of the fcoe module, they would have been moved to libfcoe. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-27[SCSI] fcoe: kfree() -> kfree_skb()Dan Carpenter
sk_buff pointers should use kfree_skb() instead of vanilla kfree(). Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe, libfcoe: Add support for FIP. FCoE discovery and keep-alive.Joe Eykholt
FIP is the new standard way to discover Fibre-Channel Forwarders (FCFs) by sending solicitations and listening for advertisements from FCFs. It also provides for keep-alives and period advertisements so that both parties know they have connectivity. If the FCF loses connectivity to the storage fabric, it can send a Link Reset to inform the E_node. This version is also compatible with pre-FIP implementations, so no configured selection between FIP mode and non-FIP mode is required. We wait a couple seconds after sending the initial solicitation and then send an old-style FLOGI. If we receive any FIP frames, we use FIP only mode. If the old FLOGI receives a response, we disable FIP mode. After every reset or link up, this determination is repeated. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe, libfc: fix double fcoe_softc memory allocVasu Dev
The foce_softc mem was reserved by libfc_host_alloc as well as by fcoe_host_alloc. Removes one liner fcoe_host_alloc completely, instead directly calls libfc_host_alloc to alloc scsi_host with libfc for just one fcoe_softc as fcoe private data. Moves libfc_host_alloc to libfc.h since it is a libfc API, placed lport_priv API adjacent to libfc_host_alloc since this is related to scsi_host priv data. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe moduleVasu Dev
Removes no where used several inline functions prefixed with skb_* and be16_to_cpu. Moves fcoe module specific func prototypes to fcoe.c from libfcoe.h, moved only need for build. Adds fcoe module header file fcoe.h and then moves fcoe module specific fcoe_percpu_s and fcoe_softc to fcoe.h from libfcoe.h. Moves all defines from fcoe.c to fcoe.h since now fcoe module has its own header file fcoe.h. [jejb: removed EXPORT_SYMBOL_GPL(fcoe_fc_crc) which caused a section mismatch] Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: moves common FCoE library API functions to libfcoe moduleVasu Dev
Moves these functions as-is from fcoe.c to libfcoe.c, since they're are common routines: - fcoe_wwn_from_mac - fcoe_libfc_config Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe, libfc: add libfcoe moduleVasu Dev
Just sets up build environment for libfcoe module towards a libfcoe library for libfc LLDs using FCoE as libfc transport. Common library code to libfcoe is added in next patch. Also, updated MODULE_LICENSE from "GPL" string to "GPL v2" for libfc, libfcoe and fcoe modules to accurately match the licenses. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: renames libfcoe.c to fcoe.c as the only fcoe module fileVasu Dev
Renames libfcoe.c to fcoe.c, fcoe.c becomes the only .c file for fcoe.ko. Also deleted "$Id: Makefile" from fcoe module Makefle. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: removes default sw transport code file fcoe_sw.cVasu Dev
Moves only required code from fcoe_sw.c to libfcoe.c towards having just one source file for fcoe module, this gets rid off default sw transport code in a separate fcoe_sw.c file. Very minor renaming along this move, dropped _sw_ or _SW_ use in names and replaced them by _if_ as a auxiliary interface functions. Now some of these funcs can be removed or merged with other func after fcoe transport is gone, but that should be in another patch to keep this patch simple. Now the libfcoe.c file name for fcoe module doesn't go along well, so the libfcoe.c file renaming to fcoe.c as the only single fcoe module file is done in next patch to keep this patch clean and small for review. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: removes fc_transport_fcoe.[ch] code filesVasu Dev
Remove unused fc_transport_fcoe.c and fc_transport_fcoe.h files. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: prep work to completely remove fc_transport_fcoe codeVasu Dev
The fcoe transport code was added for generic FCoE transport infrastructure to allow additional offload related module loading on demand, this is not required anymore after recently added different offload approach by having offload related func ops in netdev. This patch removes fcoe transport related code use, calls functions directly between existing libfcoe.c and fcoe_sw.c for now, for example fcoe_sw_destroy and fcoe_sw_create calling. The fcoe_sw.c and libfcoe.c code will be further consolidated in later patches and then also the default fcoe sw transport code file fcoe_sw.c will be completely removed. The fcoe transport code files are completely removed in next patch to keep this patch simple for reviewing. [This patch is an update to a previous patch. This update resolves a build error as well as fixes a defect related to not calling fc_release_transport().] Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: create/destroy fcoe Rx threads on CPU hotplug eventsRobert Love
This patch adds support for dynamically created Rx threads upon CPU hotplug events. There were existing synchronization problems that this patch attempts to resolve. The main problem had to do with fcoe_rcv() running in a different context than the hotplug notifications. This opened the possiblity that fcoe_rcv() would target a Rx thread for a skb. However, that thread could become NULL if the CPU was made offline. This patch uses the Rx queue's (a skb_queue) lock to protect the thread it's associated with and we use the 'thread' member of the fcoe_percpu_s to determine if the thread is ready to accept new skbs. The patch also attempts to do a better job of cleaning up, both if hotplug registration fails as well as when the module is removed. Contribution provided by Joe Eykholt <jeykholt@cisco.com> to fix incorrect use of __cpuinitdata. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: Use per-CPU kernel function for dev_stats instead of an arrayRobert Love
Remove the hotplug creation of dev_stats, we allocate for all possible CPUs now when we allocate the lport. v2: Durring the 2.6.30 merge window, before these patches were comitted, 'percpu_ptr' was renamed 'per_cpu_ptr'. This latest update updates this patch for the name change. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: Use percpu kernel funcs for struct fcoe_percpu_sRobert Love
Convert fcoe_percpu array to use the per-cpu variables that the kernel provides. Use the kernel's functions to access this structure. The cpu member of the fcoe_percpu_s is no longer needed, so this patch removes it too. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03[SCSI] fcoe: Initialize all possilbe skb_queue(s) when module is loadedRobert Love
Currently the skb_queue is initialized every time the associated CPU goes online. This patch has libfcoe initializing the skb_queue for all possible CPUs when the module is loaded. This patch also re-orders some declarations in the fcoe_rcv() function so the structure declarations are grouped before the primitive declarations. Lastly, this patch converts all CPU indicies to use unsigned int since CPU indicies should not be negative. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] fcoe: fcoe fc crc offload indication by skb->ip_summedYi Zou
If LLD supports FCCRC offload, it should set ip_summed to be CHECKSUM_UNNECESSARY so we don't have to do CRC check again. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] fcoe: add support to FCoE offload support in fcoe_sw through net_deviceYi Zou
This adds implementation of ddp_setup()/ddp_done() in fcoe_sw for its fcoe_sw_libfc_fcn_templ. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] fcoe: add support to large send by gso through net_device for fcoe_swYi Zou
Change fcoe_xmit to setup gso for LLD LSO offload as well as CRC offload Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] fcoe, libfc: check offload features from LLD through netdevYi Zou
This checks if net_devices supports FCoE offload ops in netdev_ops and it if it does, then sets up the corresponding flags in the associated fc_lport. For large send offload, the maximum length supported in one large send is now described by the added lso_max in fc_lport, which is setup initially from netdev->gso_max_size. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] net, fcoe: add ETH_P_FCOE for Fibre Channel over Ethernet (FCoE)Yi Zou
This adds eth type ETH_P_FCOE for Fibre Channel over Ethernet (FCoE), consequently, the ETH_P_FCOE from fc_fcoe.h and fcoe skb->protocol is not set as ETH_P_FCOE. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] fcoe: Change fcoe receive thread nice value from 19 (lowest priority) ↵Robert Love
to -20 This change makes the fcoe Rx threads have the same nice value as lpfc and qla2xxx Rx threads. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] fcoe: fix handling of pending queue, prevent out of order frames (v3)Chris Leech
In fcoe_check_wait_queue() the queue length could temporarily drop to 0, before the last frame was successfully sent. This resulted in out of order data frames within a single sequence, leading to IO timeout errors. This builds on the approach from Vasu Dev to only fix the queue management in fcoe_check_wait_queue, where my first patch added locking to the transmit path even when the pending queue was not in use. This patch continues to use fcoe_pending_queue.qlen instead of introducing a new length counter, but takes precautions to ensure it never drops to 0 before the final frame in the queue has successfully been passed to the netdev qdisc layer. It also includes some cleanup of fcoe_check_wait_queue and removes the fcoe_insert_wait_queue(_head) wrapper functions. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] fcoe: Out of order tx frames was causing several check condition SCSI ↵Vasu Dev
status frames followed by these errors in log. [sdp] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [sdp] Sense Key : Aborted Command [current] [sdp] Add. Sense: Data phase error This was causing some test apps to exit due to write failure under heavy load. This was due to a race around adding and removing tx frame skb in fcoe_pending_queue, Chris Leech helped me to find that brief unlocking period when pulling skb from fcoe_pending_queue in various contexts (fcoe_watchdog and fcoe_xmit) and then adding skb back into fcoe_pending_queue up on a failed fcoe_start_io could change skb/tx frame order in fcoe_pending_queue. Thanks Chris. This patch allows only single context to pull skb from fcoe_pending_queue at any time to prevent above described ordering issue/race by use of fcoe_pending_queue_active flag. This patch simplified fcoe_watchdog with modified fcoe_check_wait_queue by use of FCOE_LOW_QUEUE_DEPTH instead previously used several conditionals to clear and set lp->qfull. I think FCOE_MAX_QUEUE_DEPTH with FCOE_LOW_QUEUE_DEPTH will work better in re/setting lp->qfull and these could be fine tuned for performance. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] fcoe: fix kfree(skb)Roel Kluin
Use kfree_skb instead of kfree for struct sk_buff pointers. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] fcoe: Correct fcoe_transports initialization vs. registrationRobert Love
The registration function shouldn't initialize the mutex or list head. The fcoe SW transport should initialize itself before registering. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] fcoe: Use setup_timer() and mod_timer()Robert Love
Use helper functions for watchdog timer setup. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] libfc, fcoe: Remove unnecessary cast by removing inline wrapperRobert Love
Comment from "Andrew Morton <akpm@linux-foundation.org>" > +{ > + return (struct fcoe_softc *)lport_priv(lp); unneeded/undesirable cast of void*. There are probably zillions of instances of this - there always are. This whole inline function was unnecessary. The FCoE layer knows that it's data structure is stored in the lport private data, it can just access it from lport_priv(). Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] libfc, fcoe: Cleanup function formatting and minor typosRobert Love
1) There were a few functions with a strange layout, i.e. all arguments on the second line, when not necessary. Where ever possible I moved the return value to the same line as the function name. However, when the line was too long to have a single argument on the same line I moved the return value to above line. For example: <short return> <function name>(<arg 1>, <arg2>) and <very long return value> <function name>(<arg1>, <arg2>) 2) Removed one extra whitespace line 3) Fixed two typos Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10[SCSI] libfc, fcoe: Fix kerneldoc commentsRobert Love
1) Added '()' for function names in kerneldoc comments 2) Changed comment bookends from '**/' to '*/'. The comment on the the mailing list was that '**/' "is consistently unconventional. Not wrong, just odd." The Documentation/kernel-doc-nano-HOWTO.txt states that kerneldoc comment blocks should end with '**/' but most (if not all) instance I found under drivers/scsi/ were only using the '*/' so I converted to that style. 3) Removed incorrect linebreaks in kerneldoc comments where found 4) Removed a few unnecessary blank comment lines in kerneldoc comment blocks Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-06[SCSI] libfc, fcoe: fixed locking issues with lport->lp_mutex around ↵Vasu Dev
lport->link_status The fcoe_xmit could call fc_pause in case the pending skb queue len is larger than FCOE_MAX_QUEUE_DEPTH, the fc_pause was trying to grab lport->lp_muex to change lport->link_status and that had these issues :- 1. The fcoe_xmit was getting called with bh disabled, thus causing "BUG: scheduling while atomic" when grabbing lport->lp_muex with bh disabled. 2. fc_linkup and fc_linkdown function calls lport_enter function with lport->lp_mutex held and these enter function in turn calls fcoe_xmit to send lport related FC frame, e.g. fc_linkup => fc_lport_enter_flogi to send flogi req. In this case grabbing the same lport->lp_mutex again in fc_puase from fcoe_xmit would cause deadlock. The lport->lp_mutex was used for setting FC_PAUSE in fcoe_xmit path but FC_PAUSE bit was not used anywhere beside just setting and clear this bit in lport->link_status, instead used a separate field qfull in fc_lport to eliminate need for lport->lp_mutex to track pending queue full condition and in turn avoid above described two locking issues. Also added check for lp->qfull in fc_fcp_lport_queue_ready to trigger SCSI_MLQUEUE_HOST_BUSY when lp->qfull is set to prevent more scsi-ml cmds while lp->qfull is set. This patch eliminated FC_LINK_UP and FC_PAUSE and instead used dedicated fields in fc_lport for this, this simplified all related conditional code. Also removed fc_pause and fc_unpause functions and instead used newly added lport->qfull directly in fcoe. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-30[SCSI] fcoe: fix incorrect use of struct moduleJames Bottomley
This structure may not be defined if CONFIG_MODULE=n, so never deref it. Change uses of module->name to module_name(module) and corrects some dyslexic printks and docbook comments. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29[SCSI] fcoe: Fibre Channel over EthernetRobert Love
Encapsulation protocol for running Fibre Channel over Ethernet interfaces. Creates virtual Fibre Channel host adapters using libfc. This layer is the LLD to the scsi-ml. It allocates the Scsi_Host, utilizes libfc for Fibre Channel protocol processing and interacts with netdev to send/receive Ethernet packets. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>