aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/ibmvscsi
AgeCommit message (Collapse)Author
2006-12-30[PATCH] powerpc iseries link error in allmodconfigJudith Lebzelter
Choose rpa_vscsi.c over iseries_vscsi.c when building both pseries and iseries. This fixes a link error. Signed-off-by: Judith Lebzelter <judith@osdl.org> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06[PATCH] ... and then some more work_struct-induced breakage (ibmvscsi)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-03[SCSI] scsi tgt: IBM eServer i/pSeries virtual SCSI target driverFUJITA Tomonori
This is IBM Virtual SCSI target driver for tgt. The driver is based on the original ibmvscsis driver: http://lkml.org/lkml/2005/10/17/99 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] ibmvscsi: correctly reenable CRQSantiago Leon
The "ibmvscsi: treat busy and error conditions separately" patch submitted by Dave Boutcher back in June incorrectly reenables the CRQ. The broken logic causes the adapter to get disabled if the CRQ connection happens to close temporarily. This patch "fixes that obviously wrong logic check" (Dave's words). Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: David Boutcher <sleddog@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-08-01Merge branch 'merge'Paul Mackerras
2006-07-31[POWERPC] scsi: Constify & voidify get_property()Jeremy Kerr
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc-specific scsi driver changes. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-09[SCSI] ibmvscsi: handle inactive SCSI target during probeDave C Boutcher
Without this patch we register an interrupt with request_irq, but then return a bad return code from the module probe. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] ibmvscsi: allocate lpevents for ibmvscsi on iseriesDave C Boutcher
Allocate the correct number of lp events when running ibmvscsi on legacy iseries Signed-off-by: Dave Boutcher <sleddog@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] ibmvscsi: treat busy and error conditions separatelyDave C Boutcher
This patch fixes a condition where ibmvscsi treats a transport error as a "busy" condition, so no errors were returned to the scsi mid-layer. In a RAID environment this means that I/O hung rather than failing over. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10Merge ../linux-2.6James Bottomley
2006-04-28[SCSI] ibmvscsi: fix leak when failing to send srp eventFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14[SCSI] ibmvscsi: convert kmalloc + memset to kcallocFUJITA Tomonori
Convert kmalloc + memset to kcalloc in ibmvscsi Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Dave Boutcher <sleddog@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] ibmvscsi: remove drivers/scsi/ibmvscsi/srp.hFUJITA Tomonori
It's no longer needed after the convrsion to use the linux srp.h file. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] ibmvscsi: convert the ibmvscsi driver to use include/scsi/srp.hFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] ibmvscsi: prevent scsi commands being sent in invalid stateDave C Boutcher
There is a window where we can be re-enabling an adapter, but still allow SCSI commands to be sent to the target. This fix sets our window (request_limit) to -1 as soon as we know the adapter is being reenabled, and closes a very teeny tiny window where we could set the window back to 1 before we grab a lock. Signed-off-by: Dave Boutcher <sleddog@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-01[PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPSSegher Boessenkool
Also cleans up some nearby whitespace problems. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-26[SCSI] ibmvscsi: handle re-enable firmware messageDave C Boutcher
New versions of the Power5 firmware can send a "re-enable" message to the virtual scsi adapter. This fix makes us handle the message correctly. Without it, the driver goes catatonic and the system crashes unpleasantly. Signed-off-by: Dave Boutcher <sleddog@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-07[SCSI] ibmvscsi kexec fixDave C Boutcher
This makes ibmvscsi work correctly with the recent set of kexec patches that went in. This is based on work by Michael Ellerman, who chased this initially. He validated that it works during kexec. Handle kexec correctly in ibmvscsi. During kexec the adapter will not get cleaned up correctly, so we may need to reset it to make it sane again. Signed-off-by: Dave Boutcher <sleddog@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-02merge filename and modify references to iseries/vio.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/hv_types.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/hv_lp_event.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify reference to iseries/hv_lp_config.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-10-24powerpc: set the driver.owner field for all vio driversStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24powerpc: don't duplicate name between vio_driver and device_driverStephen Rothwell
Just set the name field directly in the device_driver structure contained in the vio_driver struct. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-13[SCSI] ibmvscsi compatibility fixDave C Boutcher
Linda Xie ever so gently pointed out that she had a patch to preserve compatibility with older SLES targets, and I told her we didn't need to push it to mainline. This patch explicitly checks the version of the IBMVSCSI target and ensures that large scatterlists are not sent to older targets. Signed-off-by: Linda Xie <lxie@us.ibm.com> Signed-off-by: Dave Boutcher <boutcher@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-07Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 Linus Torvalds
2005-09-06Merge by hand (conflicts in sd.c)James Bottomley
2005-09-06[SCSI] ibmvscsi: handle large scatter/gather listsJames Bottomley
The maximum size of a scatter-gather list that the current IBM VSCSI Client can handle is 10. This patch adds large scatter-gather support to the client so that it is capable of handling up to SG_ALL(255) number of requests in the scatter-gather list. Signed-off-by: Linda Xie <lxie@us.ibm.com> Acked by: Dave C Boutcher <sleddog@us.ibm.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-30[PATCH] Make MODULE_DEVICE_TABLE work for vio devicesStephen Rothwell
Make MODULE_DEVICE_TABLE work for vio devices. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Create vio_bus_opsStephen Rothwell
Create vio_bus_ops so that we just pass a structure to vio_bus_init instead of three separate function pointers. Rearrange vio.h to avoid forward references. vio.h only needs struct device_node from prom.h so remove the include and just declare it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-28Merge HEAD from ../scsi-misc-2.6-tmp James Bottomley
2005-08-28[SCSI] ibmvscsi timeout fixDave C Boutcher
This patch fixes a long term borkenness in ibmvscsi where we were using the wrong timeout field from the scsi command (and using the wrong units.) Now broken by the fact that the scsi_cmnd timeout field is gone entirely. This only worked before because all the SCSI targets assumed that 0 was default. Signed-off-by: Dave Boutcher <boutcher@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28[SCSI] ibmvscsi eh lockingDave C Boutcher
With the removal of the spinlocking around eh calls, we need to add a little more locking back in, otherwise we do some naked list manipulation. Signed-off-by: Dave Boutcher <boutcher@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30[SCSI] scsi/ibmvscsi/srp.h: Fix a wrong type code used for SRP_LOGIN_REJLinda Xie
This patch fixes srp.h which uses 0x80 for SRP_LOGIN_REJ instead of 0xc2. Signed-off-by: Linda Xie <lxie@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] IBM VSCSI Client: sending client info to serverLinda Xie
Fix the problem in IBM VSCSI Client where the client doesn't send the information which is expected by the server. Signed-off-by: Linda Xie <lxie@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_device_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_abort_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!