aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/lpfc/lpfc.h
AgeCommit message (Collapse)Author
2006-12-03[SCSI] lpfc 8.1.11 : Add soft_wwnn sysfs attribute, rename soft_wwn_enableJames Smart
The driver now allows both wwpn and wwnn to be set. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Add MSI (Message Signalled Interrupts) supportJames Smart
Add MSI (Message Signalled Interrupts) support Actual use must be enabled via the new module parameter "lpfc_use_msi" Defaults to no use Many thanks to Frederic Temporelli who implemented the initial patch. Signed-off-by: Frederic Temporelli <frederic.temporelli@ext.bull.net> Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Fix lpfc_multi_ring_supportJames Smart
It was not accounted for in the fast/slow rings. Genericize the implementation and control it via sysfs Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04[SCSI] lpfc 8.1.10 : Add support for new lpfc soft_wwpn attributeJames Smart
Add support for a new lpfc soft_wwpn sysfs attribute Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04[SCSI] lpfc 8.1.10 : Add support for dev_loss_tmo_callbk and ↵James Smart
fast_io_fail_tmo_callbk Add support for new dev_loss_tmo callback Goodness is that it removes code for a parallel nodev timer that existed in the driver Add support for the new fast_io_fail callback Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] lpfc 8.1.10 : Add support to post events via new FC event interfacesJames Smart
Add support to post events via new FC event interfaces Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Standardize the driver on a single define for the maximum ↵James Smart
supported targets Standardize the driver on a single define for the maximum supported targets. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] Block I/O while SG reset operation in progress - lpfc portionJames Smart
This removes the duplicate functionality which had been added to the lpfc driver. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Introduce lpfc_reset_barrier() function for resets on ↵James Smart
dual channel adapters Introduce lpfc_reset_barrier() function for resets on dual channel adapters Workaround for a hardware errata on dual channel asics. There is a potential for the chip to lock up on a reset if a shared dma engine is in use. The (ugly) work around requires a reset process which uses a mailbox command to synchronize the independent channels prior to the reset to avoid the issue. Unfortunately, the timing windows required to ensure this workaround succeeds are very specific, meaning we can't release the cpu during the barrier. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix performance when using multiple SLI ringsJamie Wellnitz
Fix performance when using multiple SLI rings Currently the driver allocates all of its SLI command and response ring entries to one primary ring. Other rings get little, or no, resources. Allow more resources to be given to ring 1 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Add ERROR and WARM_START modes for diagnostic purposes.Jamie Wellnitz
Add ERROR and WARM_START modes for diagnostic purposes. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove hba_list from struct lpfc_hbaJamie Wellnitz
Remove hba_list from struct lpfc_hba Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Misc FC Discovery changes :Jamie Wellnitz
Misc FC Discovery changes : - Added FC_BYPASSED_MODE statistic - Corrected some log message data - Fix up Discovery infrastructure to support FAN: Allow Fabric entities to flow thru DSM Fix up linkup/linkdown unregister login processing for Fabric entities Clean up Discovery code Utilize nodev_tmo for Fabric entities - Use of 3 * ratov for CT handling timeouts - Fix up DSM to make more appropriate decisions and clean up code. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Handling of ELS commands RRQ, RPS, RPL and LIRR correctlyJamie Wellnitz
Handling of ELS commands RRQ, RPS, RPL and LIRR correctly Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove unreferenced cfg_fcp_bind_method from struct lpfc_hbaJamie Wellnitz
Remove unreferenced cfg_fcp_bind_method from struct lpfc_hba Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Added code to adjust lun queue depth to avoid target ↵James.Smart@Emulex.Com
overloading Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Add polled-mode supportJames.Smart@Emulex.Com
- Add functionality to run in polled mode only. Includes run time attribute to enable mode. - Enable runtime writable hba settings for coallescing and delay parameters Customers have requested a mode in the driver to run strictly polled. This is generally to support an environment where the server is extremely loaded and is looking to reclaim some cpu cycles from adapter interrupt handling. This patch adds a new "poll" attribute, and the following behavior: if value is 0 (default): The driver uses the normal method for i/o completion. It uses the firmware feature of interrupt coalesing. The firmware allows a minimum number of i/o completions before an interrupt, or a maximum time delay between interrupts. By default, the driver sets these to no delay (disabled) or 1 i/o - meaning coalescing is disabled. Attributes were provided to change the coalescing values, but it was a module-load time only and global across all adapters. This patch allows them to be writable on a per-adapter basis. if value is 1 : Interrupts are left enabled, expecting that the user has tuned the interrupt coalescing values. When this setting is enabled, the driver will attempt to service completed i/o whenever new i/o is submitted to the adapter. If the coalescing values are large, and the i/o generation rate steady, an interrupt will be avoided by servicing completed i/o prior to the coalescing thresholds kicking in. However, if the i/o completion load is high enough or i/o generation slow, the coalescion values will ensure that completed i/o is serviced in a timely fashion. if value is 3 : Turns off FCP i/o interrupts altogether. The coalescing values now have no effect. A new attribute "poll_tmo" (default 10ms) exists to set the polling interval for i/o completion. When this setting is enabled, the driver will attempt to service completed i/o and restart the interval timer whenever new i/o is submitted. This behavior allows for servicing of completed i/o sooner than the interval timer, but ensures that if no i/o is being issued, then the interval timer will kick in to service the outstanding i/o. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Fixes to error handlersJames.Smart@Emulex.Com
- Release task management command before counting outstanding commands. TMF was being erroneously counted as an active outstanding command. - Serialize EH calls and block requests when EH function is running. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Remove RPI hash from the driverJames.Smart@Emulex.Com
Table was not providing a lot of value and injected a couple of errors. Removed it and made functionality inline. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12[SCSI] lpfc driver 8.0.30 : fix get_stats panicJames.Smart@Emulex.Com
Fix panic in lpfc_get_stats() Symptoms: Panic on sysfs stats access Cause: In lpfc_get_stats() we are writing to memory that we do not own. Fix: Fix our stats structure allocation. Embed phba->link_stats in struct lpfc_hba and stop treating it like rogue structure. Note: Embedding midlayer/transport structure in our structure caused need for more files to include midlayer/transport headers. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Update copyright noticesJames.Smart@Emulex.Com
Update copyright notice text and include year 2005. Add Copyright notice for Christoph Hellwig to several files: lpfc.h lpfc_attr.c lpfc_els.c lpfc_hbadisc.c lpfc_init.c lpfc_mbox.c lpfc_mem.c lpfc_nportdisc.c lpfc_scsi.c lpfc_sli.c Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Remove $Id$ keyword strings.James.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18lpfc: add Emulex FC driver version 8.0.28
From: James.Smart@Emulex.Com Modified for kernel import and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>