aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/lpfc/lpfc_els.c
AgeCommit message (Collapse)Author
2008-07-12[SCSI] lpfc 8.2.7 : Miscellaneous FixesJames Smart
Miscellaneous Fixes: - Fix bug in mbox sysfs interface that locked in EAGAIN if discovery stalled. - Fix missing error message when npiv and loop are true when link up occurs. - Fix panic in lpfc_scsi_cmd_iocb_cmpl: scsi_buf was NULL, but created race conditions with other code paths. - Fix error in sysfs mailbox structure that didn't rezero on next use. - Add missing mempool_free() to attachment failure path - Fix missing put of ndlp structure during driver unload. - Fix applications unable to send mailbox commands during discovery. - Remove unused argument (type) from function lpfc_post_buffer() API - Fix vport name is not shown after hbacmd vportcreate. - Remove repeated code statements. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12[SCSI] lpfc 8.2.7 : Rework the worker threadJames Smart
Rework of the worker thread to make it more efficient. Make a finer-grain notfication of pending work so less time is spent checking conditions. Also made other general cleanups. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12[SCSI] lpfc 8.2.7 : Discovery FixesJames Smart
- Fix ADISC timeout on initiators causing devloss timeout on targets - Correct FAN processing : port state vs unreg rpi's wasn't consistent - Correct mismatches between ASICs and PLOGI that would skip PLOGI Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-10[SCSI] lpfc 8.2.6 : Miscellaneous FixesJames Smart
Miscellaneous Fixes - Allow WRITE_VPARAM command when the virtual port is in a stopped state - Fixed handling of our queue depth max that was unconditionally raising the depth on all vports, rather than just the vport affected. - Fix race in interrupt handler for mailbox processing that did not take out the host lock. - Removed unused functions: find_node, findnode_rpi, and fabric_abort_flogi - Correct misspelled word unsolicited in message 0146 - Correct HW-error 5 handling - it should not reset the adapter - Correct handling of IOCBs, which did not null out our pCmd field before invoking the midlayer io done function. - Changed our maximum supported target id to 4096 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-10[SCSI] lpfc 8.2.6 : Multiple discovery fixesJames Smart
Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Miscellaneous discovery FixesJames Smart
Miscellaneous discovery fixes: - Flush RSCN buffers on vports when reseting HBA. - Fix incorrect FLOGI after vport reg failed - Fix a potential fabric ELS race condition - Fix handling of failed PLOGI command under high lip rates - Fix FDISC handling - Fix debug logging for npiv handling Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Miscellaneous FixesJames Smart
Miscellaneous fixes: - Fix ERRATT flag which was overlapping - Allow RESTART mbx commands through when stopped. - Accept incoming PLOGI when connected to an N_Port. - Fix NPort to NPort pt2pt problems: ADISC and reg_vpi issues - Fix vport unloading error that erroneously cleaned up RSCN buffers - Fix memory leak during repeated unloads - in mbox handling - Fix link bounce vs FLOGI race conditions Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Correct ndlp referencing issuesJames Smart
Correct ndlp referencing issues: - Fix ndlp kref issues due to race conditions between threads - Fix cancel els delay retry event which missed an ndlp reference count Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Rework misplaced reference taking on node structureJames Smart
Rework misplaced reference taking on node structure Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Miscellaneous FixesJames Smart
Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] lpfc 8.2.4 : Miscellaneous Discovery/ELS FixesJames Smart
Miscellaneous Discovery/ELS Fixes: - Delay free's of ELS requests if adapter reject conditions - Fix concurrent PLOGI vs ADISC state handling - Add retry mechanism for GFF_ID - Correct some illegal state transitions around RSCN timeouts - Fix missing return in FAN handling Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] lpfc: minor cleanupsAdrian Bunk
This patch contains the following minor cleanups: - make the following needlessly global functions static: - lpfc_els.c: lpfc_register_new_vport() - lpfc_els.c: lpfc_issue_els_fdisc() - lpfc_els.c: lpfc_issue_fabric_iocb() - lpfc_els.c: lpfc_fabric_abort_vport() - lpfc_hbadisc.c: lpfc_dev_loss_tmo_handler() - lpfc_hbadisc.c: lpfc_mbx_cmpl_clear_la() - lpfc_hbadisc.c: lpfc_disc_flush_list() - lpfc_hbadisc.c: __lpfc_find_node() - lpfc_init.c: lpfc_hb_timeout() - lpfc_init.c: lpfc_block_mgmt_io() - lpfc_sli.c: __lpfc_sli_release_iocbq() - lpfc_sli.c: lpfc_sli_next_hbq_slot() - lpfc_sli.c: lpfc_sli_hbqbuf_init_hbqs() - lpfc_sli.c: lpfc_sli_hbqbuf_find() - lpfc_sli.c: __lpfc_sli_issue_iocb() - #if 0 the following unused global functions: - lpfc_els.c: lpfc_fabric_abort_flogi() - lpfc_hbadisc.c: lpfc_find_node() - lpfc_hbadisc.c: lpfc_findnode_rpi() - remove the unused exports Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] lpfc 8.2.3 : Miscellaneous Small Fixes - part 2James Smart
Miscellaneous Small Fixes - part 2 - Fix ndlp left in PLOGI state after link up - Fix cannot rcv unsol ELS frames after running HBA resets for a few minutes - Fix HBQ buffer_count implemention - Fix RPI leak - Fix crash while deleting vports while HBA is reset - Revert the FCP Fbits offset back to 7 - Fix panic when deleting vports - Remove unused code in switch statement outside of a case - Reject PLOGI from invalid PName or NName of 0 - Ignore PLOGI responses from WWPName or WWNName of 0 - Fix debugfs hbqinfo display for ppc - Added 8G to list of supported speeds for sysfs parameter - Defer ndlp cleanup to dev-loss timeout handler - Added support for WRITE_VPARMS mailbox command by applications Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] lpfc 8.2.3 : FC Discovery FixesJames Smart
FC Discovery Fixes: - Fix up lpfc_drop_node() vs lpfc_nlp_not_used() usage - Clear ADISC flag when unregistering RPI and REMOVE ndlps if in recovery. - Fix usage of UNUSED list and ndlps - Fix PLOGI race conditions - Reset link if NameServer PLOGI errors occur - Synchronize GID_FT queries with PLOGI receptions Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] lpfc 8.2.3 : Miscellaneous Small Fixes - part 1James Smart
Miscellaneous Small Fixes - part 1 - Fix typo kmzlloc -> kzalloc - Fix discovery ndlp use after free panic - Fix link event causing flood of 0108 messages - Relieve some mbox congestion on link up with 100 vports - Fix broken vport parameters - Prevent lock recursion in logo_reglogin_issue - Split uses of error variable in lpfc_pci_probe_one into retval and error - Remove completion code related to dev_loss_tmo - Remove unused LPFC_MAX_HBQ #define - Don't compare pointers to 0 for sparse - Make 2 functions static for sparse - Fix default rpi cleanup code causing rogue ndlps to remain on the NPR list - Remove annoying ELS messages when driver is unloaded - Fix Cannot issue Register Fabric login problems on link up - Remove LPFC_EVT_DEV_LOSS_DELAY - Fix FC port swap test leads to device going offline - Fix vport CT flags to only be set when accepted - Add code to handle signals during vport_create - Fix too many retries in FC-AL mode - Pull lpfc_port_link_failure out of lpfc_linkdown_port Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] lpfc 8.2.3 : Remove flawed MBX_STOP_IOCB logicJames Smart
Remove flawed MBX_STOP_IOCB logic Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-08-01[SCSI] lpfc 8.2.2 : Miscellaneous Bug FixesJames Smart
- Fix vport ndlp ref counting errors - Fix use after free of ndlp structure - Use the correct flag to check for LOADING setting. - Fix driver unload bugs (related to shost references) after link down or rscn - Fix up HBQ initialization - Fix port_list locking around driver unload. - Fix references to hostdata as a phba - Fix GFFID type offset to work correctly with big endian structure. - Only call pci_disable_msi if the pci_enable_msi succeeded - Fix vport_delete wait/fail if in discovery - Put a reference on the nameservers ndlp when performing CT traffic. - Remove unbalanced hba unlock. - Fix up HBQ processing - Fix lpfc debugfs discovery trace output for ELS rsp cmpl - Send ADISC when rpi is 0 - Stop FDISC retrying forever - Unable to retrieve correct config parameter for vport - Fix sli_validate_fcp_iocb, sli_sum_iocb, sli_abort_iocb to be vport-aware. - Fix index-out-of-range error in iocb. Spotted by Coverity. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Rework the lpfc_printf_log() macroJames Smart
Rework the lpfc_printf_log() macro so that logging is enabled on a per-vport basis. Used to be on a physical-port basis, thus logging with large numbers of vports became a mess. Required redefinition of the macro, and an update of every use. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Attribute and Parameter splits for vport and physical portJames Smart
- Split attributes up into vport and non-vport attributes. - Move vport specific cfg params to vport Many of the vport-specific behaviors were still global attributes on the physical port. Move them to the vport itself. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_listJames Smart
Cleans up a lot of bad behaviors that have been in this area a while Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Error messages and debugfs updatesJames Smart
Error messages and debugfs updates: - Fix up GID_FT error messages - Enhance debugfs with slow_ring_trace, dumpslim and nodelist information - Add log type (and messages) for vport state changes - Enhance log messages when retries ELS fail Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] lpfc: bug fixesJames Smart
Following the NPIV support, the following changes have been accumulated in the testing and qualification of the driver: - Fix affinity of ELS ring to slow/deferred event processing - Fix Ring attention masks - Defer dev_loss_tmo timeout handling to worker thread - Consolidate link down error classification for better error checking - Remove unused/deprecated nlp_initiator_tmr timer - Fix for async scan - move adapter init code back into pci_probe_one context. Fix async scan interfaces. - Expand validation of ability to create vports - Extract VPI resource cnt from firmware - Tuning of Login/Reject policies to better deal with overwhelmned targets - Misc ELS and discovery fixes - Export the npiv_enable attribute to sysfs - Mailbox handling fix - Add debugfs support - A few other small misc fixes: - wrong return values, double-frees, bad locking - Added adapter failure heartbeat Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3James Smart
NPIV support is added to the driver. It utilizes the interfaces of the fc transport for the creation and deletion of vports. Within the driver, a new Scsi_Host is created for each NPIV instance, and is paired with a new instance of a FC port. This allows N FC Port elements to share a single Adapter. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] lpfc: NPIV: add SLI-3 interfaceJames Smart
NPIV support is only available via new adapter interface extensions, termed SLI-3. This interface changes some of the basic behaviors such as command and response ring element sizes and data structures, as well as a change in buffer posting. Note: the new firmware extensions are found only on our mid-range and enterprise 4Gig adapters - so NPIV support is available only on these newer adapters. The latest firmware can be downloaded from the Emulex support page. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] lpfc: NPIV: split portsJames Smart
The driver is reorganized to separate the handling of the adapter from the handling of the FC port. Adapter handling includes submissions of command requests, receiving responses, and managing adapter resources. The FC port includes the discovery engine, login handling, and the mapping of a Scsi_Host on the "port". Although not a large functional change, as it touches core structures and functions, resulting in a large text delta. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Update copyright year to 2007James Smart
Update copyright year to 2007 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Collapse discovery lists to a single node listJames Smart
Collapse discovery lists to a single node list. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Reference count node structures for node lifetime ↵James Smart
management Reference count node structures for node lifetime management. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Improve handling of failed ELS abortsJames Smart
Improve handling of failed ELS aborts. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Improve diagnostic messages and change local loopback ↵James Smart
message to KERN_INFO Improve diagnostic messages and change local loopback message to KERN_INFO Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Round 2 of Miscellaneous fixesJames Smart
Round 2 of Miscellaneous fixes: - Ensure we don't prematurely re-enable IRQs in lpfc_sli_abort_fcp_cmpl(). - Prevent freeing of iocb after IOCB_TIMEDOUT error. - Added code to cleanup REG_LOGIN mailbox command when a LOGO is received. - Fix offline window where more work can sneak in after clearing work_ha - Use target reset instead of LU reset in bus_device_reset_handler - Fixed system hangs due to leaked host_lock. - Fixed NULL pointer dereference during I/O with LIP. - Fixed false iocb timeout. - Fixed name server query response handling. - Change rport dev_loss_tmo value when user change lpfc HBA's dev_loss_tmo. - Fixed a memory leak in lpfc_sli_wake_mbox_wait. - Fixed check for dropped frames. - Removed hba queue depth calculation based on device PCI IDs - Change min cr_count value specified in comment to agree with setting Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Reorganize lpfc_nlp_list() and callers to prepare for ↵James Smart
nodelist simplification Reorganize lpfc_nlp_list() and callers to prepare for nodelist simplification. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Fix unlock inside list traversalJames Smart
Fix unlock inside list traversal. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Modify ELS abort handling to prevent double completionJames Smart
Modify ELS abort handling to prevent double completion Rework portions of ELS abort handling to prevent double completion - Rework ELS iotags and correct abort routine - Move the (badly wrong) ELS completion logic from the initial ELS abort request function to the ELS completion function. - Fixup the iocb completion handling to account for the ELS abort completions. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Misc bug fixes and code cleanupJames Smart
Misc bug fixes and code cleanup: - Fix system hang while running on systems with IOMMU - Fix use after free issues with rports - Don't free mailbox structure if it's still on the mboxq list - Decrement txq_cnt rather than txcmplq_cnt when parsing the txq list - Use msleep for long delays to prevent soft lockup bug check - Don't remove node during dev_loss_tmo if discovery is active - Fix memory leaks in get/reset statistics and link attention paths - Fixed lpfc_ns_rsp to handle entire GID_FT response. - mbox interface should use MAILBOX_CMD_SIZE rather than sizeof(MAILBOX_t) - Fixed bug check in add_timer. - Fixup messages 0116, 0117, and 0128 to report ELS I/O tag. - Remove unused parameter to lpfc_cleanup. - Change mailbox timeout handling. - Remove unused buflist. Code cleanup. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Fix Memory leaksJames Smart
Fix Memory leaks associated with mbox cmds READ_LA, READ_SPARAM, REG_LOGIN Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Fix lpfc_multi_ring_supportJames Smart
It was not accounted for in the fast/slow rings. Genericize the implementation and control it via sysfs Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Discovery FixesJames Smart
Discovery Fixes: - Prevent starting discovery of a node if discovery is in progress. - Code improvement (reduction) for lpfc_findnode_did(). - Update discovery to send RFF to Fabric on link up - Bypass unique WWN checks for fabric addresses - Add ndlp to plogi list prior to issuing the plogi els command Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] lpfc 8.1.10 : Add support to post events via new FC event interfacesJames Smart
Add support to post events via new FC event interfaces Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] lpfc 8.1.9 : Misc Bug FixesJames Smart
Misc Bug Fixes: - Cap MBX_DOWN_LINK command timeout to 60 seconds - Fix double free of ndlp object - Don't free mbox structures on error. The completion handlers expect to do so. - Clear host attention work items when going offline - Fixed discovery issues in multi-initiator environments. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] lpfc 8.1.7 : ID String and Message fixesJames Smart
ID String and Message fixes - Fix switch symbolic name registration to match cross-OS values - Replace printk's with more standard lpfc_printf_log calls - Make all lpfc_printf_log message numbers unique Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Correct bogus nodev_tmo message on NPort that changes its ↵James Smart
NPort Id Correct bogus nodev_tmo message on NPort that changes its NPort Id Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Use mod_timer instead of add_timer in ↵James Smart
lpfc_els_timeout_handler Use mod_timer instead of add_timer in lpfc_els_timeout_handler This patch was formerly posted by Mark Haverkamp. http://marc.theaimsgroup.com/?l=linux-scsi&m=114246089015681&w=2 Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] lpfc: sparse NULL warningsRandy Dunlap
From: Randy Dunlap <rdunlap@xenotime.net> Fix sparse warnings: use NULL instead of 0 for pointers: drivers/scsi/lpfc/lpfc_els.c:827:56: warning: Using plain integer as NULL pointer drivers/scsi/lpfc/lpfc_els.c:2781:18: warning: Using plain integer as NULL pointer drivers/scsi/lpfc/lpfc_els.c:2782:18: warning: Using plain integer as NULL pointer drivers/scsi/lpfc/lpfc_init.c:951:21: warning: Using plain integer as NULL pointer drivers/scsi/lpfc/lpfc_init.c:956:20: warning: Using plain integer as NULL pointer Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Misc small fixesJames Smart
Contains the following misc fixes: - Fix build warnings - Race condition in lpfc_workq_post_event() could corrupt phba->work_list. - nlp_sid was not being initialized properly - Fix some RSCN handling during the re-discovery after Link Up event. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Additional fixes to LOGO, PLOGI, and RSCN processingJames Smart
Additional fixes to LOGO, PLOGI, and RSCN processing Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Fixed FC protocol violation in handling of PRLO.James Smart
Fixed FC protocol violation in handling of PRLO. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Use asynchronous ABTS completion to speed up abort ↵James Smart
completions Use asynchronous ABTS completion to speed up abort completions Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Fixed a timer panic due to timer firing after freeing ndlpJames Smart
Fixed a timer panic due to timer firing after freeing ndlp Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Fixed RSCN handling when a PLOGI is in retryJames Smart
Fixed RSCN handling when a PLOGI is in retry. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>