aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_iocb.c
AgeCommit message (Collapse)Author
2008-04-07[SCSI] qla2xxx: Cruft cleanup of functions and structures.Andrew Vasquez
Strip unused (DEBUG-ONLY) enabled functions, inlines, useless wrappers, and unused DPC flags from the code. Another step in the migration towards a cleaner (less-crusty) driver. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Update copyright banner.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-23[SCSI] qla2xxx: Defer explicit interrupt-polling processing to init-time ↵Andrew Vasquez
scenarios. As the intermixing may cause issues where HCCR bits could be cleared inappropriately during MSI/MSI-X interrupt handling. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] qla2xxx: Cleanup several 'sparse' warnings.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20[SCSI] qla2xxx: Re-factor isp_operations to static structures.Andrew Vasquez
In preparation for new ISP types. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20[SCSI] qla2xxx: Generalize FW-Interface-2 support.Andrew Vasquez
In preparation for new ISP types. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] qla2xxx: add support for NPIVSeokmann Ju
Following patch adds support for NPIV (N-Port ID Virtualization) to the qla2xxx. - supported within switched-fabric topologies only. - supports up to 63 virtual ports on each physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-31[SCSI] qla2xxx: convert to use the data buffer accessorsFUJITA Tomonori
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] qla2xxx: Correct endianess problem while issuing a Marker IOCB on ↵Shyam Sundar
ISP24xx. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30[SCSI] qla2xxx: make some more functions staticAdrian Bunk
Make some needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20[SCSI] qla2xxx: Drop unused driver cruft.Andrew Vasquez
- structure definitions. - structure members. - #define's. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] qla2xxx: Add ISP54xx support.andrew.vasquez@qlogic.com
Chip is similar in form to our ISP24xx offering. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-07[PATCH] qla2xxx: Correct lun assignment during IOCB submission.andrew.vasquez@qlogic.com
4gb products require an IOCB's FCP-LUN to be formatted in wire-format prior to submission. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: fix unnecessary activation of blk tag queueJames Bottomley
From: 'Andrew Vasquez' <andrew.vasquez@qlogic.com> Drop scsi_populate_tag_msg() interrogation. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Update license.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Use midlayer's int_to_scsilun() function.Andrew Vasquez
While populating command type 6 and 7 IOCBs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Add support to dynamically enable/disable ZIO.Andrew Vasquez
ISP23xx and ISP24xx chips have support for an adaptive method of posting SCSI command completions for multiple SCSI commands during a single system interrupt. SCSI commands are placed on the system response queue without interrupting the host until 1) a delay timer expires; or 2) a SCSI command completes with an error. As long as the host software (qla2xxx) services the response queue for completions (this polling is done during queuecommand()) within the 'delay timer' period, the firmware will not generate system interrupt. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Remove redundant call to pci_unmap_sg().Andrew Vasquez
In a corner-case failure where the request-q does not contain enough entries for a given request, pci_unmap_sg() would be called twice. Remove direct call and let the failure-path logic handle the unmapping. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-26Fix compiler warning in qla_iocb.cLinus Torvalds
Remove bogus initialization that was re-done (correctly) later.
2005-07-14[SCSI] qla2xxx: Update copyright banner.Andrew Vasquez
Update copyright banner. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Code scrubbing.Andrew Vasquez
Code scrubbing. - Remove trailing whitespace from driver files. - Remove unused #defines and inlines. - Standardize on C comments (// -> /* */) Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx IOCB manipulation routines.Andrew Vasquez
Add ISP24xx IOCB manipulation routines. Add appropriate glue-code for ISP24xx support while manipulting IOCB packets. Add an ISP24xx specific 'start_scsi' routine due to command-type-7 layout changes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx definitions.Andrew Vasquez
Add ISP24xx definitions. Add requisite structure definitions and #define's for ISP24xx support. Also drop volatile modifiers from device_reg_* register layouts as the members are never really accessed, only their offsets within the layout are used during reads and writes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables.Andrew Vasquez
Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] remove some dead code in qla2xxxAndrew Vasquez
Original from: Christoph Hellwig <hch@lst.de> Modified and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18[PATCH] qla2xxx: cleanup DMA mappings...
Don't use cmd->request->nr_hw_segments as it may not be initialized (SG_IO in particular bypasses anything that initializes this and just uses scsi_do_req to insert a scsi_request directly on the head of the queue) and a bogus value here can trip up the checks to make sure that the number of segments will fit in the queue ring buffer, resulting in commands that are never completed. Fix up several issues with PCI DMA mapping and failure to check return values on the mappings. Make the check for space in the ring buffer happen after the DMA mapping is done since any checks done before the mapping has taken place are bogus. Doug Ledford <dledford@redhat.com>. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18[PATCH] qla2xxx: remove lun discovery codes...
Remove internal lun discovery routines and support structures. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18[PATCH] qla2xxx: remove internal queuing...
Remove internal command queuing from the driver. As is, this driver cannot tolerate cable-pulls as I/Os will begin to fail by the upper layers. o Should be used in conjuction with the 11-fc_rport_adds_2.diff patch. o Removes qla_listops.h file -- no longer needed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!