aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_mbx.c
AgeCommit message (Collapse)Author
2008-08-16[SCSI] qla2xxx: Explicitly tear-down vports during PCI remove_one().Andrew Vasquez
During internal testing, we've seen issues (hangs) with the 'deferred' vport tear-down-processing typically accompanied with the fc_remove_host() call. This is due to the current implementation's back-end vport handling being performed by the physical-HA's DPC thread where premature shutdown could lead to latent vport requests without a processor. This should also address a problem reported by Gal Rosen (http://marc.info/?l=linux-scsi&m=121731664417358&w=2) where the driver would attempt to awaken a previously torn-down DPC thread from interrupt context by implicitly calling wake_up_process() rather than the driver's qla2xxx_wake_dpc() helper. Rather, than reshuffle the remove_one() device-removal code, during unload, depend on the driver's timer to wake-up the DPC process, by limiting wake-ups based on an 'unloading' flag. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Additional NPIV corrections.Andrew Vasquez
Minor fixes addressing: - rport managements during vport deletion. - acquire proper physical-ha during qla24xx_abort_command() and qla24xx_queuecommand() - do not needlessly acquire the pha for non-NPIV capable ISPs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Verify the RISC is not in ROM code if firmware-load is disabled.Andrew Vasquez
Add an additional check to verify that the current executing firmware is in fact non-ROM code. The non-ROM Get-ID mailbox command is used for verification. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Always aquire the parent's hardware_lock.Seokmann Ju
While issuing a marker, manipulating the request/response queues and modifying the outstanding command array. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-15[SCSI] qla2xxx: Extend the 'fw_dump' SYSFS node the ability to initiate a ↵Andrew Vasquez
firmware dump. The user-initiated dump can be a useful tool in triaging complex ISP and FC issues. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-15[SCSI] qla2xxx: Don't depend on mailbox return values while enabling FCE ↵Andrew Vasquez
tracing. Recent firmwares no longer return the 'number of buffers' in mailbox6. The original code may result in a potential panic during a FW-dump process due to the driver misinterpreting the size of the allocated buffer. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-15[SCSI] qla2xxx: Convert vport_sem to a mutexmatthias@kaehlcke.net
The semaphore vport_sem is used as a mutex. Convert it to the mutex API. Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-27[SCSI] qla2xxx: Correct misc. endian and byte-ordering issues.Seokmann Ju
There were several places in the driver which could cause byte ordering problem as provided by Al Viro <viro@ZenIV.linux.org.uk>. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-27[SCSI] qla2xxx: make qla2x00_issue_iocb_timeout() staticAdrian Bunk
This patch makes the needlessly global qla2x00_issue_iocb_timeout() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-27[SCSI] qla2xxx: Correct SRB usage-after-completion/free issues.Andrew Vasquez
The driver is incorrectly assuming that the 'sp' reference held in qla2[x00|4xx]_abort_command() is valid after the mailbox command is issued to abort the exchange. It is *not*, as the command may be completed during interrupt context before control is returned to the mailbox caller. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-27[SCSI] qla2xxx: Correct ISP84XX verify-chip response handling.Andrew Vasquez
Earlier code could trigger an infinite-retry if 1st invocation returned a non-CS_COMPLETE status. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Add ISP84XX support.Harihara Kadayam
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Additional cleanups and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Assign mailbox command timeout values in a consistent manner.Ravi Anand
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Add midlayer target/device reset support.Andrew Vasquez
Now that infrastructure is present within the midlayer and there is a clear distinction between what is expected from a device and target reset, convert the current device-reset codes to a target-reset, and add codes to perform a proper device-reset (LUN reset). In the process of adding reset support, collapse and consolidate large sections of mailbox-command (TMF issuance) codes, generalize the two 'wait-for-commands-to-complete' functions, and add a generic-reset routine for use by midlayer reset functions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Add hardware trace-logging support.Andrew Vasquez
Recent ISPs have a region within FLASH which acts as a repository for the logging of serious hardware and software failures. Currently, the region is large enough to support up to 255 entries. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Remove unused and obsolete #define's.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Update copyright banner.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03[SCSI] qla2xxx: Correct usage of inconsistent timeout values while issuing ↵Andrew Vasquez
ELS commands. The original code would incorrectly hardcode ELS timeout values rather than using the traditional '2 * r_a_tov' value. In some cases, the hardcoded values would be larger than the mailbox-command-timeout and result in a needless BIG_HAMMER (ISP reset), the typical recovery mechanism employed in such cases. The second defect in the original code was in the assignment of the default 'ha->r_a_tov' to twice the traditional value. Correct this by setting the value to 10 seconds. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Correct issue where incorrect init-fw mailbox command was ↵Andrew Vasquez
used on non-NPIV capable ISPs. BIT_2 of the firmware attributes is only valid on FW-interface-2 type HBAs. Code in commit c48339decceec8e011498b0fc4c7c7d8b2ea06c1 would cause the incorrect initialize-firmware mailbox command to be issued for non-NPIV capable ISPs. Correct this by reverting to previously used (and correct) pre-condition 'if' check. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.Seokmann Ju
There is a case where 54xx HBA loads MID firmware as it use 24xx firmware. In this case, the driver should issue MBC_MID_INITIALIZE FIRMWARE even though the HBA doesn't support NPIV. This patch make changes in the driver so that could behave accordingly. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] qla2xxx: Add Fibre Channel Event (FCE) tracing support.Andrew Vasquez
FCE support enables the firmware to record FC extended link services and basic link services frames which have been transmitted and received by the ISP. This allows for a limited view of the FC traffic through the ISP without using a FC analyzer. This can be useful in situations where a physical connection to the FC bus is not possible. The driver exports this information in two ways -- first, via a debugfs node exported for all supported ISPs under: <debugfs_mount_point>/qla2xxx/qla2xxx_<host_no>/fce where a read of the 'fce' file will provide a snapshot of the firmware's FCE buffer; and finally, the FCE buffer will be extracted during a firmware-dump scenario. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] qla2xxx: Trace-Control naming cleanups.Andrew Vasquez
In preparation for FCE (Fibre Channel Event) tracing support. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] qla2xxx: Code cleanups.Adrian Bunk
- make the following needlessly global code static: - qla_attr.c: qla24xx_vport_delete() - qla_attr.c: qla24xx_vport_disable() - qla_mid.c: qla24xx_allocate_vp_id() - qla_mid.c: qla24xx_find_vhost_by_name() - qla_mid.c: qla2x00_do_dpc_vp() - qla_os.c: struct qla2x00_driver_template - qla_os.c: qla2x00_stop_timer() - qla_os.c: qla2x00_mem_alloc() - qla_os.c: qla2x00_mem_free() - qla_sup.c: qla2x00_lock_nvram_access() - qla_sup.c: qla2x00_unlock_nvram_access() - qla_sup.c: qla2x00_get_nvram_word() - qla_sup.c: qla2x00_write_nvram_word() - #if 0 the following unused global functions: - qla_mbx.c: qla2x00_system_error() - qla_os.c: remove some unneeded function prototypes - removed unused functions: - qla_dbg.c: qla2x00_dump_pkt() - qla_mbx.c: qla2x00_get_serdes_params() - qla_mbx.c: qla2x00_get_idma_speed() - qla_mbx.c: qla24xx_get_vp_database() - qla_mbx.c: qla24xx_get_vp_entry() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Small modifications and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] qla2xxx: Use completion routines.Marcus Barrow
Instead of abusing the semaphore interfaces for mailbox command completions. Additional cleanups and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] qla2xxx: Retrieve additional HBA port statistics from recent ISPs.Andrew Vasquez
HBAs supporting these additional counters include ISP24xx and ISP25xx type boards. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] qla2xxx: Correct NPIV support for recent ISPs.Andrew Vasquez
Firmware will export to software the maximum number of vports supported for any given firmware version and ISP type. Use this information rather than the current hardcoding of limitations within the driver. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-23[SCSI] qla2xxx: Defer explicit interrupt-polling processing to init-time ↵Andrew Vasquez
scenarios. As the intermixing may cause issues where HCCR bits could be cleared inappropriately during MSI/MSI-X interrupt handling. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] qla2xxx: Clear options-flags while staging firmware-execution.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] qla2xxx: Retrieve max-NPIV support capabilities from FW.Seokmann Ju
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] qla2xxx: Add flash burst-read/write support.Andrew Vasquez
Newer ISPs support a mechanism to read and write flash-memory via the firmware LOAD/DUMP memory mailbox command routines. When supported, utilizing these mechanisms significantly reduces overall access times. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20[SCSI] qla2xxx: Generalize iIDMA support.Andrew Vasquez
In preparation for new ISP types. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20[SCSI] qla2xxx: Generalize FW-Interface-2 support.Andrew Vasquez
In preparation for new ISP types. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] qla2xxx: add support for NPIVSeokmann Ju
Following patch adds support for NPIV (N-Port ID Virtualization) to the qla2xxx. - supported within switched-fabric topologies only. - supports up to 63 virtual ports on each physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01[SCSI] qla2xxx: fix for byteswap in fc_host fabric_nameRichard Lary
This patch fixes byte swap issue in qla2xxx driver to fix corrupted fabric_name passed to /sys/class/fc_host/host*/fabric_name. Signed-off-by: Richard Lary <rlary@us.ibm.com> Acked-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31Merge branch 'linus'James Bottomley
2007-01-31[SCSI] qla2xxx: Remove unnecessary spinlock primitive - mbx_reg_lock.Seokmann Ju
Since, mailbox commands are executed in a synchronous manner, there is no need to have a separate spinlock primitive to protect data/register access shared by callers. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Perform implicit LOGO during fabric logout request.Lalit Chandivade
Similarly to previous LOGO requests on non-24xx hardware, perform an implicit-LOGO as to avoid the potential 2 * R_A_TOV delay which can result during an explicit-LOGO request. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03[SCSI] qla2xxx: Correct reset handling logic.Andrew Vasquez
- honor ISP24XX NVRAM settings for lip-reset, full-login-lip, and device-reset. - correct LIP_FULL_LOGIN mailbox command issuance. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03[SCSI] qla2xxx: Don't log trace-control async-events.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-03[SCSI] qla2xxx: Add iIDMA support.Andrew Vasquez
iIDMA (Intelligent Interleaved Direct Memory Access) allows for the HBA hardware to send FC frames at the rate at which they can be received by a target device. By taking advantage of the higher link rate, the HBA can maximize bandwidth utilization in a heterogeneous multi-speed SAN. Within a fabric topology, port speed detection is done via a Name Server command (GFPN_ID) followed by a Fabric Management command (GPSC). In an FCAL/N2N topology, port speed is based on the HBA link-rate. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Cleanup DEBUG macro usage.Andrew Vasquez
- macro usage statements should terminate with a ';' - remove unused macros. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Add DMI (Diagnostics Monitoring Interface) support.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Honour 'skip process-login' option during fabric-login IOCB.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] qla2xxx: Rework firmware-trace facilities.Andrew Vasquez
- Defer firmware dump-data raw-to-textual conversion to user-space. - Add module parameter (ql2xallocfwdump) to allow for per-HBA allocations of firmware dump memory. - Dump request and response queue data as per firmware group request. - Add extended firmware trace support for ISP24XX/ISP54XX chips. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] qla2xxx: Correct FCAL login retry logic for ISP24xx.andrew.vasquez@qlogic.com
ISP24XX FW does not support Mbx 0x74 ie Login Local Port. Added the equivalent code for ISP24XX ie to relogin in non fabric case for ISP24XX use login iocb. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] qla2xxx: Correct swing/emphasis settings on ISP24xx.andrew.vasquez@qlogic.com
Reserved-bit 15 must set when updating the swing/emphasis values. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] qla2xxx: Add ISP54xx support.andrew.vasquez@qlogic.com
Chip is similar in form to our ISP24xx offering. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02[SCSI] qla2xxx: use kthread_ APIChristoph Hellwig
Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Also switch from semaphore-based thread wakeup to wake_up_process. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-By: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-07[PATCH] qla2xxx: Pass input-buffer length to Get-ID-List mailbox command.andrew.vasquez@qlogic.com
Recent ISP24xx firmwares require that mailbox register 8 be set to the maximum number of bytes to transfer during DMA copying of the list. We safely set this value to zero (infinite), since the call is *only* made in FCAL topologies. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] qla2xxx: Add host-statistics FC transport attributes.andrew.vasquez@qlogic.com
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>