aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)Author
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits) SCSI: convert struct class_device to struct device DRM: remove unused dev_class IB: rename "dev" to "srp_dev" in srp_host structure IB: convert struct class_device to struct device memstick: convert struct class_device to struct device driver core: replace remaining __FUNCTION__ occurrences sysfs: refill attribute buffer when reading from offset 0 PM: Remove destroy_suspended_device() Firmware: add iSCSI iBFT Support PM: Remove legacy PM (fix) Kobject: Replace list_for_each() with list_for_each_entry(). SYSFS: Explicitly include required header file slab.h. Driver core: make device_is_registered() work for class devices PM: Convert wakeup flag accessors to inline functions PM: Make wakeup flags available whenever CONFIG_PM is set PM: Fix misuse of wakeup flag accessors in serial core Driver core: Call device_pm_add() after bus_add_device() in device_add() PM: Handle device registrations during suspend/resume block: send disk "change" event for rescan_partitions() sysdev: detect multiple driver registrations ... Fixed trivial conflict in include/linux/memory.h due to semaphore header file change (made irrelevant by the change to mutex).
2008-04-19SCSI: convert struct class_device to struct deviceTony Jones
It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-18Convert asm/semaphore.h users to linux/semaphore.hMatthew Wilcox
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-07[SCSI] qla2xxx: Update version number to 8.02.01-k1.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Correct vport configuration-change handling.Seokmann Ju
Upon having configuration changes on vports only, the driver handles SCR regardless physical port state and, in turn, it results mailbox error as below: Mar 20 11:24:20 dl585 kernel: qla2x00_mailbox_command(9): **** FAILED. mbx0=4005, mbx1=1, mbx2=8100, cmd=70 **** With the changes, driver checks physical port loop_state and make sure the port is ready to take commands. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Use proper HA during asynchrounous event handling.Seokmann Ju
Changes are added to the driver so that it can behave properly upon having asynchronous events, for example, addition of target devices to the VPs. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Check DFLG_NO_CABLE only on physical port.Seokmann Ju
As there is no actual cable connection on vports, made change so that the driver checks DFLG_NO_CABLE against ha->device_flags only for physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Consistently access the physical HA port.Seokmann Ju
There were several places where referencing ha structure of virtual ports for resources. Among those refereces, certain fields are get up-to-dated only on ha structure of physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Remove unused member (dma_handle) from srb_t structure.Andrew Vasquez
The member is not needed as there's no non-scatter-gather list I/Os submitted by the upper-layers. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Add ISP84XX support.Harihara Kadayam
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Additional cleanups and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Assign mailbox command timeout values in a consistent manner.Ravi Anand
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Add midlayer target/device reset support.Andrew Vasquez
Now that infrastructure is present within the midlayer and there is a clear distinction between what is expected from a device and target reset, convert the current device-reset codes to a target-reset, and add codes to perform a proper device-reset (LUN reset). In the process of adding reset support, collapse and consolidate large sections of mailbox-command (TMF issuance) codes, generalize the two 'wait-for-commands-to-complete' functions, and add a generic-reset routine for use by midlayer reset functions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Check alternate 'reason' code during GPSC status handling.Andrew Vasquez
Some switches return 0x09 (Command not supported) as the reason code for GPSC failure. Check for this code, and disable additional GPSC queries if found. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Add Flash Descriptor Table layout support.Andrew Vasquez
The Flash Descriptor Table (FDT) present on many recent HBAs encodes flash accessing characteristics of the flash-part used on the HBA. Use this information during flash manipulation (writes) rather than using specific hard-coded values based on queried manufacturer and device IDs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Use PCI-SIG nomenclature for PCIe bandwidth units.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Cruft cleanup of functions and structures.Andrew Vasquez
Strip unused (DEBUG-ONLY) enabled functions, inlines, useless wrappers, and unused DPC flags from the code. Another step in the migration towards a cleaner (less-crusty) driver. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Add hardware trace-logging support.Andrew Vasquez
Recent ISPs have a region within FLASH which acts as a repository for the logging of serious hardware and software failures. Currently, the region is large enough to support up to 255 entries. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Add FC-transport Asynchronous Event Notification support.Andrew Vasquez
Supported events include LIP, LIP reset, RSCN, link up, and link down. To support AEN (and additional forthcoming features), we also introduce a simple deferred-work construct to manage events which require a non-atomic sleeping-capable context. This work-list is processed as part of the driver's standard DPC routine. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Simplify interrupt handler locking.Andrew Vasquez
There's no need to use the heavier (albiet safer) *_irq[save|restore]() locking primitives within the driver's interrupt handlers, interrupts are guaranteed to be non-reentrant. Use lightweight spin_lock() and spin_unlock() primitives while acquiring the hardware_lock. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Use an rport's scsi_target_id member consistently throughout ↵Andrew Vasquez
driver. Rather than using a duplicate/cached value stored in the driver's internal fcport structure. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Remove unused and obsolete #define's.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Add support for host supported speeds FC transport attribute.Andrew Vasquez
Use generic FC transport #defines for speed values. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Update copyright banner.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] qla2xxx: Update firmware filenames for new ISP parts.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03[SCSI] qla2xxx: Update version number to 8.02.00-k9.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03[SCSI] qla2xxx: Correct usage of inconsistent timeout values while issuing ↵Andrew Vasquez
ELS commands. The original code would incorrectly hardcode ELS timeout values rather than using the traditional '2 * r_a_tov' value. In some cases, the hardcoded values would be larger than the mailbox-command-timeout and result in a needless BIG_HAMMER (ISP reset), the typical recovery mechanism employed in such cases. The second defect in the original code was in the assignment of the default 'ha->r_a_tov' to twice the traditional value. Correct this by setting the value to 10 seconds. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03[SCSI] qla2xxx: Correct discrepancies during OVERRUN handling on ↵Andrew Vasquez
FWI2-capable cards. For recent ISPs, software must detect OVERRUN conditions by checking the SS_RESIDUAL_OVER bit during CS_COMPLETE handling. Update the driver to perform this check, which is consistent with what earlier firmwares did by explicitly cracking open the FCP_RSP statuses and returning an CS_DATA_OVERRUN. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03[SCSI] qla2xxx: Correct needless clean-up resets during shutdown.Andrew Vasquez
There's no point in hitting the RISC with what will most assuredly be an unsucessful reset of the RISC hardware if the initial stop-firmware mailbox command fails with a time-out status. Instead, to avoid what could amount to a lengthy stop-firmware/detect-failure/reset-risc loop, continue with driver unloading and discard the stop-firmware requirement. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18[SCSI] qla2xxx: fix compile warning for printk formatFUJITA Tomonori
scsi/qla2xxx/qla_dfs.c: In function 'qla2x00_dfs_fce_show': scsi/qla2xxx/qla_dfs.c:26: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Update version number to 8.02.00-k8.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Correct issue where incorrect init-fw mailbox command was ↵Andrew Vasquez
used on non-NPIV capable ISPs. BIT_2 of the firmware attributes is only valid on FW-interface-2 type HBAs. Code in commit c48339decceec8e011498b0fc4c7c7d8b2ea06c1 would cause the incorrect initialize-firmware mailbox command to be issued for non-NPIV capable ISPs. Correct this by reverting to previously used (and correct) pre-condition 'if' check. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Access the proper 'physical' port in FC-transport callbacks.Seokmann Ju
For following fc_host specific attributes, vports rely on the pport. So, this patch changed way to access the data for those attributes so that they can access pport's. - get_host_speed (speed) - get_host_port_state (port_state) - get_host_port_type (port_type) - get_fc_host_stats Also, added PORT_SPEED_8GB case in the speed attribute for 8Gb HBAs. Signed-Off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Correct issue where vport-state was not updated during an ↵Seokmann Ju
ISP_ABORT_NEEDED requst. While running IO simultaneously through physical port and virtual port, if user changes Data Rate (from scli utility), IO through virtual port fails. It failed because the vport had not received the ISP_ABORT_NEEDED notification. Signed-Off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Move RISC-interrupt-register modifications to ↵Andrew Vasquez
qla2x00_request_irqs(). There's no functional change involved with this update, instead it simply migrates the "set cleared interrupt state" codes to a more approprate method, qla2x00_request_irqs(), and cleans-up the driver's probe() logic. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Consolidate RISC-parity enablement codes.Andrew Vasquez
Collapse duplicate codes called during probe() and RISC-reset into qla2x00_setup_chip(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Cleanse memory allocation logic during probe.Andrew Vasquez
- Drop loop-till-allocated structure of code within qla2x00_mem_alloc(). - Properly unwind deallcations of memory during failures. - Drop qla2x00_allocate_sp_pool() and qla2x00_free_sp_pool() functions as their implementations can easily be collapsed into the callers. - Defer DMA pool allocation of SFP data until requested. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Clear EFT buffer before firmware reinitialization.Andrew Vasquez
To insure that there is no stale data present during EFT re-registration. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Cleanup any outstanding SRB resources during shutdown.Andrew Vasquez
Refactor SRB-failure completion codes in the process. Also, signal the DPC routine to complete sooner as backend processing at shutdown-time is superflous. [jejb: resolve conflicts with pci_enable_device_bars removal] Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Add MODULE_FIRMWARE hint for ISP25XX firmware.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] qla2xxx: Correct resource_size_t usages.Andrew Vasquez
Hmm, it looks like the conversion to resource_size_t usage (3776541d8a46347a4924353a192c6ce4a3d04e2e) requires some additional fixups to cleanup the structure-pointer castings used during IO mapped accesses to the chip. There's only a small number of locations, where the driver uses IO mapped accesses to the hardware, the patch below should take care of it without introducing to many structural changes to code flow. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03drivers/scsi/: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Acked-by: James Smart <james.smart@emulex.com> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: David Somayajulu <david.somayajulu@qlogic.com> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-01PCI: Remove users of pci_enable_device_bars()Benjamin Herrenschmidt
This patch converts users of pci_enable_device_bars() to the new pci_enable_device_{io,mem} interface. The new API fits nicely, except maybe for the QLA case where a bit of code re-organization might be a good idea but I prefer sticking to the simple patch as I don't have hardware to test on. I'll also need some feedback on the cs5520 change. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-30[SCSI] remove use_sg_chainingJames Bottomley
With the sg table code, every SCSI driver is now either chain capable or broken (or has sg_tablesize set so chaining is never activated), so there's no need to have a check in the host template. Also tidy up the code by moving the scatterlist size defines into the SCSI includes and permit the last entry of the scatterlist pools not to be a power of two. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits) [SCSI] usbstorage: use last_sector_bug flag universally [SCSI] libsas: abstract STP task status into a function [SCSI] ultrastor: clean up inline asm warnings [SCSI] aic7xxx: fix firmware build [SCSI] aacraid: fib context lock for management ioctls [SCSI] ch: remove forward declarations [SCSI] ch: fix device minor number management bug [SCSI] ch: handle class_device_create failure properly [SCSI] NCR5380: fix section mismatch [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices [SCSI] IB/iSER: add logical unit reset support [SCSI] don't use __GFP_DMA for sense buffers if not required [SCSI] use dynamically allocated sense buffer [SCSI] scsi.h: add macro for enclosure bit of inquiry data [SCSI] sd: add fix for devices with last sector access problems [SCSI] fix pcmcia compile problem [SCSI] aacraid: add Voodoo Lite class of cards. [SCSI] aacraid: add new driver features flags [SCSI] qla2xxx: Update version number to 8.02.00-k7. [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command. ...
2008-01-23[SCSI] qla2xxx: Update version number to 8.02.00-k7.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.Seokmann Ju
There is a case where 54xx HBA loads MID firmware as it use 24xx firmware. In this case, the driver should issue MBC_MID_INITIALIZE FIRMWARE even though the HBA doesn't support NPIV. This patch make changes in the driver so that could behave accordingly. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] qla2xxx: Correct late-memset() of EFT buffer.Andrew Vasquez
Original code would clear the buffer after the firmware had already been initialized to use the buffer, thus potentially and inadvertantly clearing data previously DMA'd by the firmware. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] qla2xxx: Add Fibre Channel Event (FCE) tracing support.Andrew Vasquez
FCE support enables the firmware to record FC extended link services and basic link services frames which have been transmitted and received by the ISP. This allows for a limited view of the FC traffic through the ISP without using a FC analyzer. This can be useful in situations where a physical connection to the FC bus is not possible. The driver exports this information in two ways -- first, via a debugfs node exported for all supported ISPs under: <debugfs_mount_point>/qla2xxx/qla2xxx_<host_no>/fce where a read of the 'fce' file will provide a snapshot of the firmware's FCE buffer; and finally, the FCE buffer will be extracted during a firmware-dump scenario. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] qla2xxx: Trace-Control naming cleanups.Andrew Vasquez
In preparation for FCE (Fibre Channel Event) tracing support. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] qla2xxx: Code cleanups.Adrian Bunk
- make the following needlessly global code static: - qla_attr.c: qla24xx_vport_delete() - qla_attr.c: qla24xx_vport_disable() - qla_mid.c: qla24xx_allocate_vp_id() - qla_mid.c: qla24xx_find_vhost_by_name() - qla_mid.c: qla2x00_do_dpc_vp() - qla_os.c: struct qla2x00_driver_template - qla_os.c: qla2x00_stop_timer() - qla_os.c: qla2x00_mem_alloc() - qla_os.c: qla2x00_mem_free() - qla_sup.c: qla2x00_lock_nvram_access() - qla_sup.c: qla2x00_unlock_nvram_access() - qla_sup.c: qla2x00_get_nvram_word() - qla_sup.c: qla2x00_write_nvram_word() - #if 0 the following unused global functions: - qla_mbx.c: qla2x00_system_error() - qla_os.c: remove some unneeded function prototypes - removed unused functions: - qla_dbg.c: qla2x00_dump_pkt() - qla_mbx.c: qla2x00_get_serdes_params() - qla_mbx.c: qla2x00_get_idma_speed() - qla_mbx.c: qla24xx_get_vp_database() - qla_mbx.c: qla24xx_get_vp_entry() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Small modifications and Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>