aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)Author
2007-07-15Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits) [SCSI] ibmvscsi: convert to use the data buffer accessors [SCSI] dc395x: convert to use the data buffer accessors [SCSI] ncr53c8xx: convert to use the data buffer accessors [SCSI] sym53c8xx: convert to use the data buffer accessors [SCSI] ppa: coding police and printk levels [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c [SCSI] remove the dead CYBERSTORMIII_SCSI option [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA [SCSI] Clean up scsi_add_lun a bit [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs [SCSI] sni_53c710: Cleanup [SCSI] qla4xxx: Fix underrun/overrun conditions [SCSI] megaraid_mbox: use mutex instead of semaphore [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation. [SCSI] qla2xxx: update version to 8.02.00-k1. [SCSI] qla2xxx: add support for NPIV [SCSI] stex: use resid for xfer len information [SCSI] Add Brownie 1200U3P to blacklist [SCSI] scsi.c: convert to use the data buffer accessors ...
2007-07-14[SCSI] qla2xxx: update version to 8.02.00-k1.Seokmann Ju
Following patch bump up the driver version reflecting NPIV addition to the qla2xxx. - version changed from 8.01.07-k7 to 8.02.00-k1. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] qla2xxx: add support for NPIVSeokmann Ju
Following patch adds support for NPIV (N-Port ID Virtualization) to the qla2xxx. - supported within switched-fabric topologies only. - supports up to 63 virtual ports on each physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
2007-07-11sysfs: add parameter "struct bin_attribute *" in .read/.write methods for ↵Zhang Rui
sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11sysfs: kill unnecessary attribute->ownerTejun Heo
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31[SCSI] qla2xxx: convert to use the data buffer accessorsFUJITA Tomonori
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] qla2xxx: fix timeout in qla2x00_down_timeoutBill Nottingham
iterations is unsigned, so it is impossible to get out of the loop and return -ETIMEDOUT. Signed-off-by: Bill Nottingham <notting@redhat.com> Acked-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24[SCSI] aacraid,qla2xxx: use irq_handler_t where appropriateJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Optimize fault kprobe handling just like powerpc. [SPARC]: Wire up utimensat syscall. [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code. [SPARC64]: Kill asm-sparc64/pbm.h [ATYFB]: Fix sparc includes. [QLA2XXX]: Fix build on sparc. [SPARC64]: Removal of trivial pci_controller_info uses. [SPARC64]: Move index info pci_pbm_info. [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info. [SPARC64]: Move pci_ops into pci_pbm_info. [SPARC64] SBUS: Error interrupt registry cleanups. [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's [SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX. [SPARC64] PCI: Use common routine to fetch PBM properties.
2007-05-08[QLA2XXX]: Fix build on sparc.David S. Miller
We now use pci_device_to_OF_node() to get properties and of_get_property() returns const pointers. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08[SCSI] qla2xxx: Update version number to 8.01.07-k7.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Add MSI support.Andrew Vasquez
Supported ISP types include ISP2422 and revision-2 type ISP2432 chips. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Correct pci_set_msi() usage semantics.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Attempt to stop firmware only if it had been previously ↵Andrew Vasquez
executed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings.Andrew Vasquez
Hardcoding the qlport_down_retry module-parameter effectively disallowed any user-defined NVRAM setting to go into effect. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA ↵Andrew Vasquez
initialization. Remove a stale check against ha->device_flags (DFLG_NO_CABLE) as topology scanning is performed within the DPC-thread context. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-30[SCSI] qla2xxx: fix regression on sparc64David Miller
Some sparc64 boxes don't have a valid NVRAM (from which the driver takes its WWPN) try to extract this from open firmware instead and if that fails, fall back to a default, which would be invalid if more than one machine on the same SAN does this, since two machines with the same WWPN would be illegal, so warn when taking this potentially invalid default. Tested on SunBlade-1000: Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01[SCSI] qla2xxx: Remove duplicate pci_disable_device() callBernhard Walle
On the path qla2x00_probe_one() -> probe_failed -> qla2x00_free_device(), pci_disable_device() is executed twice, once in qla2x00_free_device() and once in qla2x00_probe_one(). This patch removes the unnecessary call. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01[SCSI] qla2xxx: fix for byteswap in fc_host fabric_nameRichard Lary
This patch fixes byte swap issue in qla2xxx driver to fix corrupted fabric_name passed to /sys/class/fc_host/host*/fabric_name. Signed-off-by: Richard Lary <rlary@us.ibm.com> Acked-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20[SCSI] qla2xxx: Update version number to 8.01.07-k6.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20[SCSI] qla2xxx: Allow the extended-error-logging flag to be dynamic.Andrew Vasquez
The module parameter, ql2xextended_error_logging, can now be set dynamically by writing to the following sysfs entry: /sys/module/qla2xxx/parameters/ql2xextended_error_logging This alleviates the need for the driver to be unloaded and reloaded in order to enable logging. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20[SCSI] qla2xxx: Drop acquisition of hardware_lock during flash manipulations.Andrew Vasquez
There's no need given, I/O has been quiesced, RISC interrupts have been disabled, and finally the RISC has been paused. Flash manipulation on ISP21xx, ISP22xx, and ISP23xx parts requires the RISC to go through a full reset to recover. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20[SCSI] qla2xxx: Add cond_resched() calls during HBA flash manipulation.Andrew Vasquez
We're observing soft lockups during HBA FLASH retrieval and update. Add cond_resched() each time around the tight-loops during flash read()s/write()s. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20[SCSI] qla2xxx: Add scan_[start|finish]() callbacks for ISP24xx HBAs.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20[SCSI] qla2xxx: fix RSCN handling on big-endian systemsMalahal Naineni
qla2xxx driver fails to handle RSCN events affecting area or domain due to an endian issue on big endian systems. This fixes the port_id_t structure on big endian systems. Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Acked-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Update version number to 8.01.07-k5.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31Merge branch 'linus'James Bottomley
2007-01-31[SCSI] qla2xxx: Remove unnecessary spinlock primitive - mbx_reg_lock.Seokmann Ju
Since, mailbox commands are executed in a synchronous manner, there is no need to have a separate spinlock primitive to protect data/register access shared by callers. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Fixup printk() with proper new-line character.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Allow NVRAM updates to immediately go into effect.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Enable queue-full throttling when UNDERRUN detected.Andrew Vasquez
As ISP24xx firmware can return a CS_DATA_UNDERRUN completion status when the storage has returned a SAM_STAT_TASK_SET_FULL scsi-status. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Fail initialization when inconsistent NVRAM detected.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Check loop-state before reading host statistics.Andrew Vasquez
Non-ISP24xx cards must have a loop-id in order to query host statistics. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Refactor set-HBA-model/description code.Andrew Vasquez
Limit assignments via qla2x00_model_name[] array to HBA subsystem vendor IDs equal to QLogic. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Set correct cabling state during initialization.Andrew Vasquez
Previous work to add asynchronous-scsi-scanning support (d19044c32baadeb80e135027124a9e845c6f057c) caused peculiar semantic changes when no cabling was attached to the HBA whereby unneeded and intrusive 'error-handling' would take place due to the initial link state being unset. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Perform implicit LOGO during fabric logout request.Lalit Chandivade
Similarly to previous LOGO requests on non-24xx hardware, perform an implicit-LOGO as to avoid the potential 2 * R_A_TOV delay which can result during an explicit-LOGO request. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Export OptionROM boot-codes version information.Andrew Vasquez
This includes BIOS, EFI, FCODE and firmware versions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Handle IRQ-0 assignments by the system.Andrew Vasquez
No restriction should be placed on the IRQ number assigned to a given ISP. Original code incorrectly assumed a non-zero IRQ number assignment by the system. In these circumstances the proper freeing of the IRQ (via free_irq()) would not take place. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Add MSI-X support.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31[SCSI] qla2xxx: Correct sector-erase issues while writing flash.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] qla2xxx: correct locking while call starget_for_each_device()Seokmann Ju
Removed spin_unlock_irq()/spin_lock_irq() pairs surrounding starget_for_each_device() calls. As Matthew W. pointed out, starget_for_each_device() can be called under a spinlock being held. The change has been tested and verified on qla2xxx.ko module. Thanks Matthew W. and Hisashi H. for help. Signed-off-by: Andrew Vasquez <Andrew.vasquez@qlogic.com> Signed-off-by: Seokmann Ju <Seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03[SCSI] qla2xxx: Update version number to 8.01.07-k4.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03[SCSI] qla2xxx: Use generic isp_ops.fw_dump() function.Andrew Vasquez
Rather than a direct call, as was done in the case of a RISC-paused state within the ISP24xx interrupt handler. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03[SCSI] qla2xxx: Perform a fw-dump when an ISP23xx RISC-paused state is detected.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03[SCSI] qla2xxx: Correct reset handling logic.Andrew Vasquez
- honor ISP24XX NVRAM settings for lip-reset, full-login-lip, and device-reset. - correct LIP_FULL_LOGIN mailbox command issuance. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03[SCSI] qla2xxx: Correct IOCB queueing mechanism for ISP54XX HBAs.Andrew Vasquez
Original code would incorrectly use non-24xx code-paths. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03[SCSI] qla2xxx: Detect GPSC capabilities within a fabric.Andrew Vasquez
Disable subsequent GPSC queries if Fabric Management services do not support the operation. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03[SCSI] qla2xxx: Use proper prep_ms_iocb() function during GFPN_ID.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>