aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)Author
2006-01-12[SCSI] qla2xxx: Kconfig: two fixesAndrew Vasquez
Original From: Adrian Bunk Here's a composite patch with Adrian's original additions and help-text with the new Kconfig variable SCSI_QLA_FC. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15Merge by hand (conflicts in scsi_lib.c)James Bottomley
This merge is pretty extensive. The conflict is over the new req->retries parameter, so I had to change the prototype to scsi_setup_blk_pc_cmnd() and the usage in sd, sr and st. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] qla2xxx: fix compile error caused by pci_dev.owner moveJames Bottomley
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] qla2xxx: Resync with latest released ISP24xx firmware -- 4.00.16.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] qla2xxx: Add support for embedded ISP24xx firmware.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] qla2xxx: Add full firmware(-request) hotplug support for all ISPs.Andrew Vasquez
Transition driver to exclusively use the request_firmware() interfaces to retrieve firmware-blobs from user-space. This will be the default behaviour going forward until the embedded firmware-binary images are removed from the upstream kernel. Upon request, the driver caches the firmware image until the driver is unloaded. NOTE: The option is present to allow the user to continue to use the firmware-loader modules, but, should be considered deprecated. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-07[SCSI] qla2xxx: Correct short-WRITE status handling.Andrew Vasquez
Properly check FC_RESID for any non-transfered bytes regardless of firmware completion status. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-07[SCSI] qla2xxx: Correct mis-handling of AENs.Andrew Vasquez
A regression in a recent change 33135aa2a568ec1a30e734f18e5315e10516e4f3 caused the driver to mistakenly drop handling of AENs. Due to the incorrect handling, ports would not reappear after RSCNs and LIPs. Drops unused/incorrect compound #define from qla_def.h. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] qla2xxx: Update version number to 8.01.03-k.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] qla2xxx: Correct ISP24xx soft-reset handling.Andrew Vasquez
A driver must wait 100us before attempting an MMIO operation to the RISC after a soft-reset has been initiated. A similar delay was needed with earlier ISPs. Note: a PCI config-space read is used to flush the MMIO write to the ISP, since the ISP's state machines are unable to respond to any MMIO read during the reset process. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] qla2xxx: Correct abort issue during loop-down state.Ravi Anand
Correct issue where abort I/O command was not being issued when the loop-state was down. Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] qla2xxx: Correct loop-in-transition issuesRavi Anand
When mulitple initiators are coming up in an FCAL topology. Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] qla2xxx: Correct additional posting issues during NVRAM accesses.Andrew Vasquez
On MMIO relaxed-order platforms, it is possible for the proper delay during NVRAM access to begin before the request passes through the PCI bus (via a MMIO write) to the ISP. Thus, causing a subsequent read to the NVRAM part to fail. Add a MMIO read, after the MMIO write to insure any posted writes are flushed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-07[PATCH] kfree cleanup: drivers/scsiJesper Juhl
This is the drivers/scsi/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in drivers/scsi/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[SCSI] update fc_transport for removal of block/unblock functionsJames.Smart@Emulex.Com
We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] Add an 'Issue LIP' device attribute in fc_transport classAndrew Vasquez
Ok, here's a patch to add such a common API for fc transport users. Relevant LLD changes (lpfc and qla2xxx) also present. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: put back label erroneously removed by eh_active patchJames Bottomley
The label eh_dev_reset_done is still in use Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: fix unnecessary activation of blk tag queueJames Bottomley
From: 'Andrew Vasquez' <andrew.vasquez@qlogic.com> Drop scsi_populate_tag_msg() interrogation. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: fix compile warningAndrew Vasquez
The file is missing an include of scsi_transport_fc.h drivers/scsi/qla2xxx/qla_rscn.c:334: error: implicit declaration of function 'fc_remote_port_unblock' Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: remove eh_active checks in qla2xxx error handlingAndrew Vasquez
Here's a patch which drops the eh_active checks in the qla2xxx eh_handler callbacks. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Resync with latest released ISP23xx/63xx firmware -- 3.03.18.James Bottomley
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Update license.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Use midlayer's int_to_scsilun() function.Andrew Vasquez
While populating command type 6 and 7 IOCBs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Add support to dynamically enable/disable ZIO.Andrew Vasquez
ISP23xx and ISP24xx chips have support for an adaptive method of posting SCSI command completions for multiple SCSI commands during a single system interrupt. SCSI commands are placed on the system response queue without interrupting the host until 1) a delay timer expires; or 2) a SCSI command completes with an error. As long as the host software (qla2xxx) services the response queue for completions (this polling is done during queuecommand()) within the 'delay timer' period, the firmware will not generate system interrupt. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] qla2xxx: Correct issue where fcport is prematurely marked DEAD.Andrew Vasquez
The non-handled failure cases of the Fabric Login mailbox command handling logic would incorrectly mark the fcport as dead and not allow the standard port-down-retry-count logic to manage the transition. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[PATCH] gfp_t: drivers/scsiAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-25[PATCH] qlogic lockup fixAndrew Morton
If qla2x00_probe_one()'s call to qla2x00_iospace_config() fails, we call qla2x00_free_device() to clean up. But because ha->dpc_pid hasn't been set yet, qla2x00_free_device() tries to stop a kernel thread which hasn't started yet. It does wait_for_completion() against an uninitialised completion struct and the kernel hangs up. Fix it by initialising ha->dpc_pid a bit earlier. Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-25[SCSI] qla2xxx: fix remote port timeout with qla2xxx driverAndrew Vasquez
This patch fixes a hole in the rport unblock handling when processing fabric events via the ADISC/PLOGI device state machine. Original code would not properly 'unblock' the port upon the port reloging into the fabric. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-17[PATCH] qla2xxx: Use dword accessors for PCI_ROM_ADDRESSAdam Kropelin
PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using pci_bus_{read,write}_config_dword(). A recent audit of drivers/ turned up several cases of byte- and word-sized accesses. The harmful ones were fixed by Linus directly. This patches up one of the remaining harmless-but-still-wrong cases caught in the dragnet. Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 Linus Torvalds
2005-09-10[SCSI] qla2xxx: use wwn_to_u64() transport helperAndrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-09[PATCH] trivial iomem annotations in qla2xxx/qla_dbg.cviro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04[SCSI] qla2xxx: Update version number to 8.01.00-k.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Stop firmware execution at unintialization time.Andrew Vasquez
On ISP24xx parts, stop execution of firmware during ISP tear-down. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Replace schedule_timeout().Andrew Vasquez
From: Nishanth Aravamudan <nacc@us.ibm.com> Replace schedule_timeout() with msleep()/msleep_interruptible() as appropriate, to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Remove bad call to fc_remove_host() during probe failure.Andrew Vasquez
fc_remove_host() should only be called after a scsi_host has been successfully added via scsi_add_host() -- any failures while qla2xxx probing would result in an incorrect call to fc_remove_host() during cleanup. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Add host attributes.Andrew Vasquez
Export additional host information via the shost_attrs member in the scsi_host template. Attributes include: driver version, firmware version, ISP serial number, ISP type, ISP product ID, HBA model name, HBA model description, PCI interconnect information, and HBA port state. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Add change_queue_depth/type() API support.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Remove redundant call to pci_unmap_sg().Andrew Vasquez
In a corner-case failure where the request-q does not contain enough entries for a given request, pci_unmap_sg() would be called twice. Remove direct call and let the failure-path logic handle the unmapping. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Remove RISC pause/release barriers during flash manipulation.Andrew Vasquez
Remove unnecessary RISC pause/release barriers during ISP24xx flash manipulation. The ISP24xx can arbitrate flash access requests during RISC executions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Correct LED scheme definition.Andrew Vasquez
Original implementation used an overloaded bit in the EFI parameters. The correct bit is BIT_4 of the special_options section of NVRAM. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Simplify redundant target/device reset logic.Andrew Vasquez
Remove redundant qla2x00_target_reset() function in favour of the equivalent qla2x00_device_reset(). Update callers of old function. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Correct domain/area exclusion logic.Andrew Vasquez
In an FL topology, limit port recognition to those devices not within the same area and domain of the ISP. The firmware will recogonize such devices during local-loop discovery. Some devices may respond to a PLOGI before they have completed their fabric login or they may not be a public device. In this case they will report: domain == 00 area == 00 alpa == <XX> which is valid. Exclude such devices from local loop discovery. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Add FDMI support.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Export class-of-service (COS) information.Andrew Vasquez
Export COS information for the fc_host and fc_remote_port objects added by the driver. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Use dma_get_required_mask() in determining the 'ideal' DMA mask.Andrew Vasquez
In order to efficiently utilise the ISP's IOCB request-queue, use the dma_get_required_mask() function to determine the use of command-type 2 or 3 IOCBs when queueing SCSI commands. This applies to ISP2[123]xx chips only, as the ISP24xx uses command-type 7 IOCBs which use 64bit DSDs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-27[PATCH] More qla2xxx configuration fixesAndrew Vasquez
This adds the appropriate FW_LOADER pre-requisite and a separate entry for ISP24xx support. Thanks to Adrian Bunk and Jesper Juhl for their efforts in fixing this quirk. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27Fix up qla2xxx configuration bogosityLinus Torvalds
If we haven't configured the qla24xx driver, then the Makefile shouldn't do it for us. This also means that we can avoid the unnecessary selection of FC_ATTRS. Debugged by James Bottomley
2005-07-26Fix compiler warning in qla_iocb.cLinus Torvalds
Remove bogus initialization that was re-done (correctly) later.
2005-07-26[PATCH] qla2xxx: Kconfig dependency fixAndrew Morton
*** Warning: "fc_remote_port_block" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "scsi_is_fc_rport" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remote_port_unblock" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remote_port_rolechg" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_release_transport" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remove_host" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remote_port_add" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_attach_transport" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>