aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)Author
2008-10-20PCI: use pci_find_ext_capability everywhereJesse Barnes
Remove some open coded (and buggy) versions of pci_find_ext_capability in favor of the real routine in the PCI core. Tested-by: Tomasz Czernecki <czernecki@gmail.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: change MSI-x vector to 32bitYinghai Lu
We are using 28bit pci (bus/dev/fn + 12 bits) as irq number, so the cache for irq number should be 32 bit too. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-13[SCSI] qla2xxx: use new host byte transport errors.Mike Christie
This has qla2xxx use the new transport error values instead of DID_BUS_BUSY. I am not sure if all the errors in qla_isr.c I changed are transport related. We end up blocking/deleting the rport for all of them so it is better to use the new transport error since the fc classs will decide when to fail the IO. With this patch if I pull a cable then IO that had reached the driver, will be failed with DID_TRANSPORT_DISRUPTED (not including tape). The fc class will then fail the IO when the fast io fail tmo has fired, and the driver will flush any other commands running. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] ibmvfc, qla2xxx, lpfc: remove scsi_target_unblock calls in terminate ↵Mike Christie
callbacks The fc class now calls scsi_target_unblock after calling the terminate callback, so this patch removes the calls from the drivers. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] qla2xxx: return SCSI_MLQUEUE_TARGET_BUSY when driver has detected ↵Mike Christie
rport error or race If the fcport is not online then we do not want to block IO to all ports on the host. We just want to stop IO on port not online, so we should be using the SCSI_MLQUEUE_TARGET_BUSY return value. For the case where we race with the rport memset initialization we do not want the queuecommand to be called again so we can just use SCSI_MLQUEUE_TARGET_BUSY for this. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] qla2xxx: fix printk format warningsAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] qla2xxx: Update version number to 8.02.01-k8.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.Ravi Anand
As the driver is only interested in bits 0-9 of the 1st RSCN-payload word: rsvd[15:14]RscnEventQualifier[13:10]Fmt[9:8]Domain[7:0] Area[15:8]Alpa[7:0] Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.Andrew Vasquez
Add additional tightening of residual-count handling (originally from commit 6acf8190025e9c4ea513d4084ff089d476112816) where the driver should discard any lower SCSI-status during firmware/transport residual-count mismatches. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] qla2xxx: Fix "occured" spelling errors.Bjorn Helgaas
Fix "occured" spelling errors. Most of these are in comments, which I wouldn't normally bother with, but a couple are in printks, which irritate me more. So I just fixed them all at the same time. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] qla2xxx: Add NPIV-Config Table support.Andrew Vasquez
To instatiate pre-configured vport entities defined within an HBA's flash memory. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] qla2xxx: Add Flash Layout Table support.Andrew Vasquez
The Flash Layout Table (FLT) present on many recent HBAs encodes flash usage information, organizes data stored into separate regions and presents the information uniformly to the driver. Use this information rather than using specific hard-coded values based on ISP type. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] qla2xxx: Change GFP_ATOMIC to GFP_KERNEL for non-atomic allocations.Andrew Vasquez
Both call-sites are sleeping-capable. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] qla2xxx: Add input/output byte-count statistics.Harish Zunjarrao
Currently Firmware does not have counters for input megabytes and output megabytes, therefore driver counts these values depending on the status of the scsi command and direction of the command. The values are exported in the FC_HOST path. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] qla2xxx: Remove semaphore.hMatthew Wilcox
Now that qla2xxx has been converted to mutexes, it no longer needs the semaphore include. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-09-13[SCSI] qla2xxx: Defer enablement of RISC interrupts until ISP initialization ↵Andrew Vasquez
completes. Josip Rodin noted (http://article.gmane.org/gmane.linux.ports.sparc/10152) the driver oopsing during registration of an rport to the FC-transport layer with a backtrace indicating a dereferencing of an shost->shost_data equal to NULL. David Miller identified a small window in driver logic where this could happen: > Look at how the driver registers the IRQ handler before the host has > been registered with the SCSI layer. > > That leads to a window of time where the shost hasn't been setup > fully, yet ISRs can come in and trigger DPC thread events, such as > loop resyncs, which expect the transport area to be setup. > > But it won't be setup, because scsi_add_host() hasn't finished yet. > > Note that in Josip's crash log, we don't even see the > > qla_printk(KERN_INFO, ha, "\n" > " QLogic Fibre Channel HBA Driver: %s\n" > " QLogic %s - %s\n" > " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n", > ... > > message yet. > > Which means that the crash occurs between qla2x00_request_irqs() > and printing that message. Close this window by enabling RISC interrupts after the host has been registered with the SCSI midlayer. Reported-by: Josip Rodin <joy@entuzijast.net> Cc: Stable Tree <stable@kernel.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-16[SCSI] qla2xxx: Update version number to 8.02.01-k7.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16[SCSI] qla2xxx: Explicitly tear-down vports during PCI remove_one().Andrew Vasquez
During internal testing, we've seen issues (hangs) with the 'deferred' vport tear-down-processing typically accompanied with the fc_remove_host() call. This is due to the current implementation's back-end vport handling being performed by the physical-HA's DPC thread where premature shutdown could lead to latent vport requests without a processor. This should also address a problem reported by Gal Rosen (http://marc.info/?l=linux-scsi&m=121731664417358&w=2) where the driver would attempt to awaken a previously torn-down DPC thread from interrupt context by implicitly calling wake_up_process() rather than the driver's qla2xxx_wake_dpc() helper. Rather, than reshuffle the remove_one() device-removal code, during unload, depend on the driver's timer to wake-up the DPC process, by limiting wake-ups based on an 'unloading' flag. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16[SCSI] qla2xxx: Reference proper ha during SBR handling.Andrew Vasquez
The executing-HA of an SRB can be referenced from the sp->fcport. Use this correct value while processing status-continuation data and abort processing. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16[SCSI] qla2xxx: Set npiv_supported flag for FCoE HBAs.Mike Hernandez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16[SCSI] qla2xxx: Don't leak SG-DMA mappings while aborting commands.Andrew Vasquez
Original code inadvertently cleared an SRB's 'flags' while aborting; causing a follow-on scsi_dma_unmap() to be potentially missed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16[SCSI] qla2xxx: Correct vport-state management issues during ISP-ABORT.Andrew Vasquez
* Use correct 'ha' to mark a device lost from ISR. I/Os will always be returned on the physical-HA. qla2x00_mark_device_lost() should be called with the HA bound to the fcport. * Mark *all* devices lost during ISP-ABORT (bighammer). These fixes correct issues discovered locally where during link-perturbation and heavy vport-I/O fcport/rport states would stray and an rport's scsi-target lost (timed-out). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16[SCSI] qla2xxx: Correct synchronization of software/firmware fcport states.Andrew Vasquez
Greg Wettstein (greg@enjellic.com) noted: http://article.gmane.org/gmane.linux.scsi/43409 on a reboot of a previously recognized SCST target, the initiator driver would be unable to re-recognize the device as a target. It turns out that prior to the SCST software reloading and returning it's "target-capable" abilities in the PRLI payload, the HBA would be re-initialized as an initiator-only type port. Since initiators typically classify themselves as an FCP-2 capable device, both software and firmware do not perform an explicit logout during port-loss. Unfortunately, as can be seen by the failure case, when the port (now target-capable) returns, firmware performs an ADISC without a follow-on PRLI, leaving stale 'initiator-only' data in the firmware's port database. Correct the discrepancy by performing the explicit logout during the transport's request to terminate-rport-io, thus synchronizing port states and ensuring a follow-on PRLI is performed. Reported-by: Greg Wettstein <greg@enjellic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-28[SCSI] qla2xxx: fix msleep compile errorFUJITA Tomonori
drivers/scsi/qla2xxx/qla_attr.c: In function 'qla24xx_vport_delete': drivers/scsi/qla2xxx/qla_attr.c:1184: error: implicit declaration of function 'msleep' make[3]: *** [drivers/scsi/qla2xxx/qla_attr.o] Error 1 make[3]: *** Waiting for unfinished jobs.... Reported-by: David Miller <davem@davemloft.net> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Update version number to 8.02.01-k6.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Additional NPIV corrections.Andrew Vasquez
Minor fixes addressing: - rport managements during vport deletion. - acquire proper physical-ha during qla24xx_abort_command() and qla24xx_queuecommand() - do not needlessly acquire the pha for non-NPIV capable ISPs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: suppress uninitialized-var warningAndrew Morton
drivers/scsi/qla2xxx/qla_os.c: In function 'qla2x00_post_work': drivers/scsi/qla2xxx/qla_os.c:2158: warning: 'flags' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: use memory_read_from_buffer()Akinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Issue proper ISP callbacks during stop-firmware.Andrew Vasquez
As the original code would incorrectly call the non-ISP24xx/25xx callbacks during recovery, a stop-firmware failure could result in improper bit-banging of the RISC and in some cases manifest in a NMI-watchdog trigger due to the RISC not coming out of its reset state. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Update version number to 8.02.01-k5.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Don't hardcode fw_transfer_size for ISP2[45]xx parts.Andrew Vasquez
Use the full buffer size available, as there's no reason to limit the firwmare-image load-segment size for these parts. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Verify the RISC is not in ROM code if firmware-load is disabled.Andrew Vasquez
Add an additional check to verify that the current executing firmware is in fact non-ROM code. The non-ROM Get-ID mailbox command is used for verification. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Correct overflow during dump-processing on large-memory ↵Andrew Vasquez
ISP23xx parts. Total ram words can exceed a 16bit value on large-memory boards. Safely extend to a 32bit width. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Skip FDMI registration on ISP21xx/22xx parts.Andrew Vasquez
Firmware does not have the facilities to issue management server IOCBs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Correct rport/fcport visibility-state handling during ↵Seokmann Ju
loop-resync. There were several issues here, one, during RSCN handling if a follow-on RSCN occurred (within interrupt context) the DPC thread could inadvertantly leave the fcport in a stale lost state. Secondly, scheduled rport removal is handled exclusively by the 'parent' DPC thread, so wake up the proper thread. Finally, process vport loop-resync's only when the vport has in an "active" state (ID acquired). Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Correct vport management of MBA_PORT_UPDATE.Seokmann Ju
By allowing the qla2x00_alert_all_vps() to manage per-vport recognition of the MBA. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Correct fcport state-management during loss.Seokmann Ju
All fcport->state management should be done within qla2x00_mark_device_lost(), the assignment of state within qla2x00_mark_vp_devices_dead() caused associated rports to not be removed. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Always aquire the parent's hardware_lock.Seokmann Ju
While issuing a marker, manipulating the request/response queues and modifying the outstanding command array. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Swap enablement order of EFT and FCE.Andrew Vasquez
The firmware group has suggested that FCE (Fibre Channel Event) tracing be enabled prior to EFT (Extended Firmware Tracing) to maximize the capturing of data on the wire. This change has no real semantic effect on driver operation, as it's mostly a shuffling of code. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Retrieve board serial-number and description from VPD.Joe Carnuccio
Recent ISPs have this information written at manufacturing time, so use the information. This also reduces future churn of the qla_devtbl.h file contents, as the driver can now depend on the information to be present in VPD. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Allow the user the option of disabling iIDMA.Andrew Vasquez
iIDMA support requires the driver issue several additional fabric-managegment (FM) commands per port discovered during SNS scanning -- GFPN (Get Fabric Port Name) and GPSC (Get Port Speed Capabilities). It has been found during testing that some switches do not respond as *well* as expected to these commands (silence -- no ACC nor BS_RJT). So, to handle such conditions, allow the user the ability to indirectly disable the FM commands by disabling iIDMA with the ql2xiidmaenable module-parameter. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Cleanup NPIV related functionsSeokmann Ju
Removed repeated or unnecessary operations during vport creation/deletion. Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Add LIP count to FC-transport statistics.Harish Zunjarrao
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Track total number of ISP aborts.Harish Zunjarrao
This parameter counts the total number of ISP aborts during driver execution. The value is exported through a DEVICE_ATTR() off the scsi_host. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Set an rport's dev_loss_tmo value in a consistent manner.Andrew Vasquez
As there's no point in adding a fixed-fudge value (originally 5 seconds), honor the user settings only. We also remove the driver's dead-callback get_rport_dev_loss_tmo function (qla2x00_get_rport_loss_tmo()). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Add dev_loss_tmo_callbk/terminate_rport_io callback support.Seokmann Ju
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26[SCSI] qla2xxx: Correct locking during NVRAM manipulation.Andrew Vasquez
Commit 2c96d8d0c17978bbf5eb82314d488f46d4a51280 pushed the acquisition of hardware_lock to too fine a level, which in turn will cause problems with cond_resched()s added with 40a2e34a94c336b716f631b2952d233e1ba76e3c. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-30[SCSI] qla2xxx: Update version number to 8.02.01-k4.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-30[SCSI] qla2xxx: Correct handling of AENs postings for vports.Seokmann Ju
Initialize all proper structure members in order to support work-list vport processing. This code also properly acquires the correct (physical hardware_lock) lock during work submission. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>