aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/scsi_error.c
AgeCommit message (Collapse)Author
2006-02-27[SCSI] scsi: scsi command retries off by one fixBrian King
Fix up an off by one error in calculating retries for scsi commands. This bug was discovered when an SG_IO request was sent to scsi core with retries = 0, causing the overall timeout check to go off in scsi_softirq_done. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-26[SCSI] Prevent scsi_execute_async from guessing cdb lengthbrking@us.ibm.com
When the scsi_execute_async interface was added it ended up reducing the flexibility of userspace to send arbitrary scsi commands through sg using SG_IO. The SG_IO interface allows userspace to specify the CDB length. This is now ignored in scsi_execute_async and it is guessed using the COMMAND_SIZE macro, which is not always correct, particularly for vendor specific commands. This patch adds a cmd_len parameter to the scsi_execute_async interface to allow the caller to specify the length of the CDB. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15Merge by hand (conflicts in scsi_lib.c)James Bottomley
This merge is pretty extensive. The conflict is over the new req->retries parameter, so I had to change the prototype to scsi_setup_blk_pc_cmnd() and the usage in sd, sr and st. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-14[SCSI] Convert SCSI mid-layer to scsi_execute_asyncMike Christie
Add scsi helpers to create really-large-requests and convert scsi-ml to scsi_execute_async(). Per Jens's previous comments, I placed this function in scsi_lib.c. I made it follow all the queue's limits - I think I did at least :), so I removed the warning on the function header. I think the scsi_execute_* functions should eventually take a request_queue and be placed some place where the dm-multipath hw_handler can use them if that failover code is going to stay in the kernel. That conversion patch will be sent in another mail though. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-08[SCSI] fix OOPS due to clearing eh_action prior to aborting eh commandMichael Reed
The eh_action semaphore in scsi_eh_send_command is cleared after a command timeout. The command is subsequently aborted and the abort will try to call scsi_done() on it. Unfortunately, the scsi_eh_done() routine unconditinally completes the semaphore (which is now null). Fix this race by makiong the scsi_eh_done() routine check that the semaphore is non null before completing it (mirroring the ordinary command done/timeout logic). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] use a completion in scsi_send_eh_cmndChristoph Hellwig
scsi_send_eh_cmnd currently uses a semaphore and an overload of eh_timer to either get a completion for a command for a timeout. Switch to using a completion and wait_for_completion_timeout to simply the code and not having to deal with the races ourselves. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] remove Scsi_Host.eh_activeChristoph Hellwig
now that the abuse in qla2xxx is gone this field can be remove. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] tidy up scsi_error_handlerChristoph Hellwig
adjust comments, remove a useless cast and remove a write-only variable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] use scmd_id(), scmd_channel() throughout codeJeff Garzik
Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] use {sdev,scmd,starget,shost}_printk in generic codeJeff Garzik
rejections fixed and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] move the mid-layer printk's over to shost/starget/sdev_printkJames Bottomley
This should eliminate (at least in the mid layer) to make numeric assumptions about any of the enumeration variables. As a side effect, it will also make all the messages consistent and line us up nicely for the error logging strategy (if it ever shows itself again). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19[PATCH] scsi_error thread exits in TASK_INTERRUPTIBLE state.Steven Rostedt
Found in the -rt patch set. The scsi_error thread likely will be in the TASK_INTERRUPTIBLE state upon exit. This patch fixes this bug. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-19[SCSI] Fix thread termination for the SCSI error handleJames Bottomley
From: Alan Stern <stern@rowland.harvard.edu> This patch (as561) fixes the error handler's thread-exit code. The kthread_stop call won't wake the thread from a down_interruptible, so the patch gets rid of the semaphore and simply does set_current_state(TASK_INTERRUPTIBLE); Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Modified to simplify the termination loop and correct the sleep condition. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19[SCSI] fix oops on usb storage device disconnectJames Bottomley
We fix the oops by enforcing the host state model. There have also been two extra states added: SHOST_CANCEL_RECOVERY and SHOST_DEL_RECOVERY so we can take the model through host removal while the recovery thread is active. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06Merge by hand (conflicts in sd.c)James Bottomley
2005-09-06[SCSI] unexport scsi_add_timer/scsi_delete_timerChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] switch EH thread startup to the kthread APIChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] return success after retries in scsi_eh_turAlan Stern
The problem lies in the way the error handler uses TEST UNIT READY to tell whether error recovery has succeeded. The scsi_eh_tur function gives up after one round of retrying; after that it decides that more error recovery is needed. However TUR is liable to report sense data indicating a retry is needed when in fact error recovery has succeeded. A typical example might be SK=2, ASC=4, ASCQ=1 (Logical unit in process of becoming ready). The mere fact that we were able to get a sensible reply to the TUR should indicate that the device is working well enough to stop error recovery. I ran across a case back in January where this happened. A CD-ROM drive timed out the INQUIRY command, and a device reset fixed the blockage. But then the drive kept responding with 2/4/1 -- because it was spinning up I suppose -- until the error handler gave up and placed it offline. If the initial INQUIRY had received the 2/4/1 instead, everything would have worked okay. It doesn't seem reasonable for things to fail just because the error handler had started running. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28[SCSI] convert SPI transport class to scsi_executeJames Bottomley
This one's slightly more difficult. The transport class uses REQ_FAILFAST, so another interface (scsi_execute) had to be invented to take the extra flag. Also, the sense functions are shifted around to allow spi_execute to place data directly into a struct scsi_sense_hdr. With this change, there's probably a lot of unnecessary sense buffer allocation going on which we can fix later. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30[SCSI] host state model update: replace old host bitmap stateMike Anderson
Migrate the current SCSI host state model to a model like SCSI device is using. Signed-off-by: Mike Anderson <andmike@us.ibm.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] use list_for_each_entry_safe in scsi_error.cChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_eh_eflags_ macrosChristoph Hellwig
Just opencoded access to eh_eflags, it's much more readable anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->stateChristoph Hellwig
We never look at it except for the old megaraid driver that abuses it for sending internal commands. That usage can be fixed easily because those internal commands are single-threaded by a mutex and we can easily use a completion there. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->ownerChristoph Hellwig
never checked anywhere Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->abort_reasonChristoph Hellwig
Never used for anything but printing it out in debug routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_host_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_bus_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_device_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_abort_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] saved and restore result for timed out commandsPatrick Mansfield
Save and restore the scmd->result, so that timed out commands do not return the result of the TEST UNIT READY or the start/stop commands. Code is already in place to save and restore the result for the request sense case. The previous version of this patch erroneously removed the "if" check, instead add a comment as to why the "if" is needed. Signed-off-by: Patrick Mansfield <patmans@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20merge by hand - fix up rejections in Documentation/DocBook/MakefileJames Bottomley
2005-05-20[SCSI] remove spurious if tests from scsi_eh_{times_out|done}Tejun Heo
'if' tests which check if eh_action isn't NULL in both functions are always true. Remove the redundant if's as it can give wrong impressions. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] remove unnecessary scsi_delete_timer() call in scsi_reset_provider()Tejun Heo
scsi_reset_provider() calls scsi_delete_timer() on exit which isn't necessary. Remove it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-24[PATCH] SCSI GFP fixesAl Viro
Somebody forgot that | has higher priority than ?:. As the result, allocation is done with bogus flags - instead of GFP_ATOMIC + possibly GFP_DMA we always get GFP_DMA and no GFP_ATOMIC. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-18[PATCH] scsi: scsi_send_eh_cmnd() cleanup
This patch makes scsi_send_eh_cmnd() use sdev and shost instead of referencing them through scmd-> everytime. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18scsi: add DID_REQUEUE to the error handling
We have a DID_IMM_RETRY to require a retry at once, but we could do with a DID_REQUEUE to instruct the mid-layer to treat this command in the same manner as QUEUE_FULL or BUSY (i.e. halt the submission until another command returns ... or the queue pressure builds if there are no outstanding commands). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18[PATCH] scsi: remove meaningless scsi_cmnd->serial_number_at_timeout field
scsi_cmnd->serial_number_at_timeout doesn't serve any purpose anymore. All serial_number == serial_number_at_timeout tests are always true in abort callbacks. Kill the field. Also, as ->pid always equals ->serial_number and ->serial_number doesn't have any special meaning anymore, update comments above ->serial_number accordingly. Once we remove all uses of this field from all lldd's, this field should go. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18[PATCH] scsi: remove unused scsi_cmnd->internal_timeout field
scsi_cmnd->internal_timeout field doesn't have any meaning anymore. Kill the field. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!