aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/scsi_transport_fc.c
AgeCommit message (Collapse)Author
2006-09-23[SCSI] scsi_transport_fc: fixup netlink argumentsJames Bottomley
nlmsg_multicast now takes an extra allocation flag, so add it to the use in the fibre channel transport class. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04[SCSI] FC transport: Add dev_loss_tmo callbacks, and new fast_io_fail_tmo w/ ↵James Smart
callback This patch adds the following functionality to the FC transport: - dev_loss_tmo LLDD callback : Called to essentially confirm the deletion of an rport. Thus, it is called whenever the dev_loss_tmo fires, or when the rport is deleted due to other circumstances (module unload, etc). It is expected that the callback will initiate the termination of any outstanding i/o on the rport. - fast_io_fail_tmo and LLD callback: There are some cases where it may take a long while to truly determine device loss, but the system is in a multipathing configuration that if the i/o was failed quickly (faster than dev_loss_tmo), it could be redirected to a different path and completed sooner. Many thanks to Mike Reed who cleaned up the initial RFC in support of this post. The original RFC is at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115505981027246&w=2 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] SCSI & FC transport: extend event vendor id's to 64bitsJames Smart
During discussions with Mike Christie, I became convinced that we needed a larger vendor id. This patch extends the id from 32 to 64 bits. This applies on top of the prior patches that add SCSI transport events via netlink. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] SCSI and FC Transport: add netlink support for posting of transport ↵James Smart
events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] fc transport: add fc_host system_hostname attribute and u64_to_wwn()James Smart
This patch updates the fc transport for the following: - Addition of a new attribute "system_hostname" which can be used to set the fully qualified hostname that the fc_host is attached to. The fc_host can then register this string as the FDMI-based host name attribute. Note: for NPIV, a fc_host could be associated with a system which is not the local system. - Add the inline function u64_to_wwn(), which is the inverse of the existing wwn_to_u64() function. - Slight reorg, just to keep dynamic attributes with each other, etc Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] fc transport: convert fc_host symbolic_name attribute to a dynamic ↵James Smart
attribute Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] fc transport: bug fix: correct referencesJames Smart
Original post was incorrect as it didn't realize that we already had a self-referenc due to device_initialize(), and we were really only missing the put on our own reference. This was hidden by the other bug which had the midlayer reusing stargets after they were already free, which was doing too many puts on our rport. Updating FC transport for: - Add put in fc_rport_final_delete(), to release the rport. Prior, we were leaving the rport with a reference, thus the shost with references, etc. If the driver was unloaded, shosts and rports remained, along with work threads, etc - Fix fc_rport_create failure path - too many put's on parent - Add commenting to easily track ref taking. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] update max sdev block limitJames Smart
Updated patch to address comments from Pat Mansfield and Michael Reed: Bumped max to 600 (10mins). Set default dev_loss_tmo to a value other than the max (30s). Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27[SCSI] fc transport: resolve scan vs delete deadlocksJames Smart
In a prior posting to linux-scsi on the fc transport and workq deadlocks, we noted a second error that did not have a patch: http://marc.theaimsgroup.com/?l=linux-scsi&m=114467847711383&w=2 - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). Subsequently we posted a request for comments about the deadlock: http://marc.theaimsgroup.com/?l=linux-scsi&m=114469358829500&w=2 This posting resolves the second error. Here's what we now understand, and are implementing: If the lldd deletes the rport while a scan is active, the sdev's queue is blocked which stops the issuing of commands associated with the scan. At this point, the scan stalls, and does so with the shost->scan_mutex held. If, at this point, if any scan or delete request is made on the host, it will stall waiting for the scan_mutex. For the FC transport, we queue all delete work to a single workq. So, things worked fine when competing with the scan, as long as the target blocking the scan was the same target at the top of our delete workq, as the delete workq routine always unblocked just prior to requesting the delete. Unfortunately, if the top of our delete workq was for a different target, we deadlock. Additionally, if the target blocking scan returned, we were unblocking it in the scan workq routine, which really won't execute until the existing stalled scan workq completes (e.g. we're re-scheduling it while it is in the midst of its execution). This patch moves the unblock out of the workq routines and moves it to the context that is scheduling the work. This ensures that at some point, we will unblock the target that is blocking scan. Please note, however, that the deadlock condition may still occur while it waits for the transport to timeout an unblock on a target. Worst case, this is bounded by the transport dev_loss_tmo (default: 30 seconds). Finally, Michael Reed deserves the credit for the bulk of this patch, analysis, and it's testing. Thank you for your help. Note: The request for comments statements about the gross-ness of the scan_mutex still stand. Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10[SCSI] drivers/scsi: Use ARRAY_SIZE macroTobias Klauser
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of the macro. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] FC transport: fixes for workq deadlocksJames Smart
As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-21Merge ../linux-2.6James Bottomley
2006-03-14Merge ../linux-2.6James Bottomley
2006-03-13[SCSI] FC transport : Avoid device offline cases by stalling aborts until ↵James Smart
device unblocked This moves the eh_timed_out functionality from the scsi_host_template to the transport_template. Given that this is now a transport function, the EH_RESET_TIMER case no longer caps the timer reschedulings. The transport guarantees that this is not an infinite condition. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-09[SCSI] scsi_transport_fc: fix FC_HOST_NUM_ATTRSAndreas Herrmann
In the past I added an host attribute but unfortunately I forgot to increase FC_HOST_NUM_ATTRS. This is fixed with the patch. Otherwise an fibre channel lld might run into BUG_ON(count > FC_HOST_NUM_ATTRS); in fc_attach_transport(). Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] SCSI core kmalloc2kzallocJes Sorensen
Change the core SCSI code to use kzalloc rather than kmalloc+memset where possible. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] fc_transport: stop creating duplicate rport entries.Andrew Vasquez
Current fc_transport consumers initially register rports with an UNKNOWN role-state and follow-up with a call to fc_remote_port_rolechg(). Modify code in fc_remote_port_add() to scan the fc_host_rport_bindings() array for consistent bindings regardless of role-type. Original code would only scan bindings array for targets, causing duplicate fc_remote_ports/rport-X:Y-Z entries to be created for the yet-to-be-role-changed rports. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14[SCSI] remove target parent limitiationChristoph Hellwig
When James Smart fixed the issue of the userspace scan atributes crashing the system with the FC transport class he added a patch to let the transport class check if the parent is valid for a given transport class. When adding support for the integrated raid of fusion sas devices we ran into a problem with that, as it didn't allow adding virtual raid volumes without the transport class knowing about it. So this patch adds a user_scan attribute instead, that takes over from scsi_scan_host_selected if the transport class sets it and thus lets the transport class control the user-initiated scanning. As this plugs the hole about user-initiated scanning the target_parent hook goes away and we rely on callers of the scanning routines to do something sensible. For SAS this meant I had to switch from a spinlock to a mutex to synchronize the topology linked lists, in FC they were completely unsynchronized which seems wrong. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14[SCSI] fc transport: add permanent_port_name fc_host attributeAndreas Herrmann
Add fc_host attribute permanent_port_name which is used to show the port name of the primary port - the port that initially logged into the fabric. For a virtual port (registered via the primary port with FDISC command) it is useful to know not only its (virtual) port name but also the permanent port name. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
2005-12-15[SCSI] fix for fc transport recursion problem.James.Smart@Emulex.Com
In the scenario that a link was broken, the devloss timer for each rport was expire at roughly the same time, causing lots of "delete" workqueue items being queued. Depth is dependent upon the number of rports that were on the link. The rport target remove calls were calling flush_scheduled_work(), which would interrupt the stream, and start the next workqueue item, which did the same thing, and so on until recursion depth was large. This fix stops the recursion in the initial delete path, and pushes it off to a host-level work item that reaps the dead rports. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] Mark some core scsi data structures constArjan van de Ven
patch below marks a few scsi core datastructures as const, so that they end up in the .rodata section and don't cacheline share with things that get dirtied Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-04Merge by HandJames Bottomley
Conflicts in dec_esp.c (Thanks Bacchus), scsi_transport_iscsi.c and scsi_transport_fc.h Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-30[PATCH] fix missing includesTim Schmielau
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[SCSI] update fc_transport for removal of block/unblock functionsJames.Smart@Emulex.Com
We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] Add an 'Issue LIP' device attribute in fc_transport classAndrew Vasquez
Ok, here's a patch to add such a common API for fc transport users. Relevant LLD changes (lpfc and qla2xxx) also present. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] move the mid-layer printk's over to shost/starget/sdev_printkJames Bottomley
This should eliminate (at least in the mid layer) to make numeric assumptions about any of the enumeration variables. As a side effect, it will also make all the messages consistent and line us up nicely for the error logging strategy (if it ever shows itself again). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-16[SCSI] FW: [PATCH] for Deadlock in transport_fcJames.Smart@Emulex.Com
Cannot call fc_rport_terminate() under the host lock, so drop the lock. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28Merge HEAD from ../scsi-misc-2.6-tmp James Bottomley
2005-08-14[SCSI] correct transport class abstraction to work outside SCSIJames Bottomley
I recently tried to construct a totally generic transport class and found there were certain features missing from the current abstract transport class. Most notable is that you have to hang the data on the class_device but most of the API is framed in terms of the generic device, not the class_device. These changes are two fold - Provide the class_device to all of the setup and configure APIs - Provide and extra API to take the device and the attribute class and return the corresponding class_device Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-08[SCSI] fix target scanning oops with fc transport classJames.Smart@Emulex.Com
We have some nasty issues with 2.6.12-rc6. Any request to scan on the lpfc or qla2xxx FC adapters will oops. What is happening is the system is defaulting to non-transport registered targets, which inherit the parent of the scan. On this second scan, performed by the attribute, the parent becomes the shost instead of the rport. The slave functions in the 2 FC adapters use starget_to_rport() routines, which incorrectly map the shost as an rport pointer. Additionally, this pointed out other weaknesses: - If the target structure is torn down outside of the transport, we have no method for it to be regenerated at the proper parent. - We have race conditions on the target being allocated by both the midlayer scan (parent=shost) and by the fc transport (parent=rport). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!