aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/sym53c8xx_2
AgeCommit message (Collapse)Author
2007-12-18[SCSI] sym53c8xx: fix "irq X: nobody cared" regressionTony Battersby
The patch described by the following excerpt from ChangeLog-2.6.24-rc1 eventually causes a "irq X: nobody cared" error after a while: commit 99c9e0a1d6cfe1ba1169a7a81435ee85bc00e4a1 Author: Matthew Wilcox <matthew@wil.cx> Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE After this happens, the kernel disables the IRQ, causing the SCSI card to stop working until the next reboot. The problem is caused by the interrupt handler returning IRQ_NONE instead of IRQ_HANDLED after handling an interrupt-on-the-fly (INTF) condition. The following patch fixes the problem. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-18[SCSI] sym53c8xx: fix free_irq() regressionTony Battersby
The following commit changed the pointer passed to request_irq(), but failed to change the pointer passed to free_irq(): commit 99c9e0a1d6cfe1ba1169a7a81435ee85bc00e4a1 Author: Matthew Wilcox <matthew@wil.cx> Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE ... The result is that free_irq() doesn't actually take any action. This patch fixes it. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-23Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits) [SCSI] qla2xxx: Update version number to 8.02.00-k5. [SCSI] qla2xxx: Correct display of ISP serial-number. [SCSI] qla2xxx: Correct residual-count handling discrepancies during UNDERRUN handling. [SCSI] qla2xxx: Make driver (mostly) legacy I/O port free. [SCSI] qla2xxx: Fix issue where final flash-segment updates were falling into the slow-path write handler. [SCSI] qla2xxx: Handle unaligned sector writes during NVRAM/VPD updates. [SCSI] qla2xxx: Defer explicit interrupt-polling processing to init-time scenarios. [SCSI] qla2xxx: Resync with latest HBA SSID specification -- 2.2u. [SCSI] sym53c8xx: Remove sym_xpt_async_sent_bdr [SCSI] sym53c8xx: Remove pci_dev pointer from sym_shcb [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE [SCSI] sym53c8xx: Get rid of IRQ_FMT and IRQ_PRM [SCSI] sym53c8xx: Use scmd_printk where appropriate [SCSI] sym53c8xx: Simplify DAC DMA handling [SCSI] sym53c8xx: Remove tag_ctrl module parameter [SCSI] sym53c8xx: Remove io_ws, mmio_ws and ram_ws elements [SCSI] sym53c8xx: Remove ->device_id [SCSI] sym53c8xx: Use pdev->revision [SCSI] sym53c8xx: PCI Error Recovery support [SCSI] sym53c8xx: Stop overriding scsi_done ...
2007-10-23[SCSI] sym53c8xx: Remove sym_xpt_async_sent_bdrMatthew Wilcox
This function just printed a message to the user; move the print to its only caller, and turn it into an starget_printk. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove pci_dev pointer from sym_shcbMatthew Wilcox
This structure is accessed by the device; the fewer Linux things in it, the better. Using the pci_dev pointer from the hostdata requires a lot of changes: - Pass Scsi_Host to a lot of routines which currently take a sym_hcb. - Set the Scsi_Host as the pci drvdata (instead of the sym_hcb) Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONEMatthew Wilcox
Make sym_interrupt return an irqreturn_t instead of void, and take a Scsi_Host instead of a sym_hcb. Pass the Scsi_Host to the interrupt handler instead of the sym_hcb. Rename the host_data to sym_data. Keep a pci_dev pointer in the sym_data. Rename the Scsi_Host from instance to shost. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Get rid of IRQ_FMT and IRQ_PRMMatthew Wilcox
These macros aren't needed any more. They used to be used for SPARC. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Use scmd_printk where appropriateMatthew Wilcox
If we have a scsi_cmnd, it gives the user more information than the sym_name, and maybe the target. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Simplify DAC DMA handlingMatthew Wilcox
By introducing the use_dac(), set_dac() and DMA_DAC_MASK macros, we can eliminate a lot of ifdefs from the code. We now rely on the compiler to optimise away a few things that we'd formerly relied on the preprocessor to do. This makes sym_setup_bus_dma_mask() small enough to inline into its only caller. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove tag_ctrl module parameterMatthew Wilcox
With sysfs making these options tunable at runtime, there's no justification for keeping this horrendously complex specification string around. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove io_ws, mmio_ws and ram_ws elementsMatthew Wilcox
These struct elements record info that is never needed Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove ->device_idMatthew Wilcox
Following the same path as ->revision_id, remove ->device_id Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Use pdev->revisionMatthew Wilcox
Auke missed the sym2 driver in his initial sweep. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: PCI Error Recovery supportLinas Vepstas
This patch adds the PCI error recovery callbacks to the Symbios SCSI device driver. It includes support for First Failure Data Capture. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Assorted changes to initial patches, including returning IRQ_NONE from the interrupt handler if the device is offline and re-using the eh_done completion in the scsi error handler. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Stop overriding scsi_doneMatthew Wilcox
Instead of telling the reset routine that the command completed from sym_eh_done, do it from sym_xpt_done. The 'to_do' element of the ucmd is redundant -- it serves only to tell whether eh_done is valid or not, and we can tell this by checking to see if it's NULL. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Don't disable interrupts in the interrupt handlerMatthew Wilcox
Interrupts can't be re-entered, so it's sufficient to call spin_lock, not spin_lock_irqsave(). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove unnecessary check in queuecommandMatthew Wilcox
The midlayer won't scan the host ID, so we don't need to check. This is the only caller of sym_xpt_done2, so remove that too. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove data_mapping and data_mappedMatthew Wilcox
Before all commands used sg, data_mapping and data_mapped were used to distinguish whether the command had used map_single or map_sg. Now all commands are sg, so we can delete data_mapping, data_mapped and the wrapper functions __unmap_scsi_data, __map_scsi_sg_data, unmap_scsi_data and map_scsi_sg_data. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Use pci_dev irq numberMatthew Wilcox
Don't cache a private copy of the interrupt number Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Work around 53c896 erratumKai Makisara
Prevent DMA transfers from crossing the 16MB limit for early 53c896 chips. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-19Spelling fix: explicitlyJean Delvare
From: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-16[SCSI] add use_sg_chaining option to scsi_host_templateFUJITA Tomonori
This option is true if a low-level driver can support sg chaining. This will be removed eventually when all the drivers are converted to support sg chaining. q->max_phys_segments is set to SCSI_MAX_SG_SEGMENTS if false. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24[SCSI] sym53c8xx: don't claim cpqarray deviceChip Coldwell
Apropos this thread http://marc.theaimsgroup.com/?l=linux-scsi&m=115591706804045&w=2 which led to this patch http://www.kernel.org/git/?p=linux/kernel/git/jejb/scsi-rc-fixes-2.6.git;a=commit;h=b2b3c121076961333977f485f0d54c22121df920 We also need to fix sym53c8xx only to bind to the PCI ID if it is of device class PCI_CLASS_STORAGE_SCSI (otherwise it will be the cpqarray RAID device). Signed-off-by: Chip Coldwell <coldwell@redhat.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-15[SCSI] sym53c8xx: convert to use the data buffer accessorsFUJITA Tomonori
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-17Fix misspellings of "agressive".Robert P. J. Day
Fix the various misspellings of "agressive", as well as a couple other things on the same lines while we're there. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-13[PATCH] Fix numerous kcalloc() calls, convert to kzalloc()Robert P. J. Day
All kcalloc() calls of the form "kcalloc(1,...)" are converted to the equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect ordering of the first two arguments are fixed. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-07-28[SCSI] sym2: claim only "Storage" classGrant Grundler
The follow patch fixes a problem for Matt Taggart. The Compaq system he had (dl380?) has a SmartArray device that exposes the 53c1510 device in both RAID and "normal" modes. The difference is in RAID mode, the smart array driver (IIRC) should claim the device instead of sym2 driver. Patch below prevents sym2 from claiming the device when the RAID "daughter board" is attached. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-02[PATCH] irq-flags: scsi: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-21Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits) [SCSI] 53c700: remove reliance on deprecated cmnd fields [SCSI] hptiop: don't use cmnd->bufflen [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver [SCSI] aacraid: small misc. cleanups [SCSI] aacraid: Update supported product information [SCSI] aacraid: Fix return code interpretation [SCSI] scsi_transport_sas: fix panic in sas_free_rphy [SCSI] remove RQ_SCSI_* flags [SCSI] remove scsi_request infrastructure [SCSI] mptfusion: change driver revision to 3.03.10 [SCSI] mptfc: abort of board reset leaves port dead requiring reboot [SCSI] mptfc: fix fibre channel infinite request/response loop [SCSI] mptfc: set fibre channel fw target missing timers to one second [SCSI] mptfusion: move fc event/reset handling to mptfc [SCSI] spi transport: don't allow dt to be set on SE or HVD buses [SCSI] aic7xxx: expose the bus setting to sysfs [SCSI] scsi: remove Documentation/scsi/cpqfc.txt [SCSI] drivers/scsi: Use ARRAY_SIZE macro [SCSI] Remove last page_address from dc395x.c [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver ... Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to the sparc interrupt cleanups)
2006-06-20[SPARC]: Kill __irq_itoa().David S. Miller
This ugly hack was long overdue to die. It was a way to print out Sparc interrupts in a more freindly format, since IRQ numbers were arbitrary opaque 32-bit integers which vectored into PIL levels. These 32-bit integers were not necessarily in the 0-->NR_IRQS range, but the PILs they vectored to were. The idea now is that we will increase NR_IRQS a little bit and use a virtual<-->real IRQ number mapping scheme similar to PowerPC. That makes this IRQ printing hack irrelevant, and furthermore only a handful of drivers actually used __irq_itoa() making it even less useful. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-10[SCSI] drivers/scsi: Use ARRAY_SIZE macroTobias Klauser
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of the macro. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-06[SCSI] fix up request buffer reference in various scsi driversChristoph Hellwig
Various scsi drivers use scsi_cmnd.buffer and scsi_cmnd.bufflen in their queuecommand functions. Those fields are internal storage for the midlayer only and are used to restore the original payload after request_buffer and request_bufflen have been overwritten for EH. Using the buffer and bufflen fields means they do very broken things in error handling. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] sym2: Fix build when spinlock debugging is enabledMatthew Wilcox
When spinlock debugging is turned on, a struct completion grows beyond the size allowed for the scsi_pointer. So move the struct completion back onto the stack. The additional memory barriers are to keep us from completing a random piece of kernel stack if the command happens to complete after the error handling has finished. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] Version 2.2.3Matthew Wilcox
Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] Enable clustering and large transfersMatthew Wilcox
This patch enables clustering and sets max_sectors to 0xffff to enable reading and writing of large blocks with tapes (and large transfers with sg). This change is needed after the sg and st drivers started using chained bios through scsi_request_async() in 2.6.16. Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] Simplify error handlingMatthew Wilcox
Use wait_for_completion_timeout() instead of using a timer (as Christoph Hellwig did for aic7xxx). That lets me eliminate the sym_eh_wait structure; the struct completion, the old_done pointer and the to_do flag can be folded into the sym_ucmd (which overrides the scsi_pointer in scsi_cmnd). The sym_eh_done() function becomes much simpler as the timeout handling is done in sym_eh_handler() directly. The host_lock can be unlocked earlier, and I cache the host in a local variable to make accesses to it quicker. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] Allow nvram settings to determine bus modeMatthew Wilcox
The PDC code can set the bus mode, but we were ignoring that setting. Also move the code that determines bus mode into its own function. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] Use SPI messages where possibleMatthew Wilcox
Now sym2 is using spi_print_msg, we don't need to have our own messages for IGNORE WIDE RESIDUE and MODIFY DATA POINTER, so provide the option of passing NULL for the label. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] Disable sym2 driver queueingMatthew Wilcox
Undef SYM_OPT_HANDLE_DEVICE_QUEUEING. Call sym_put_start_queue instead of sym_start_next_ccbs. Turn asserts into checks that we can send the command to the adapter, and return busy from queuecommand if we can't. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] Mark div_10M array constMatthew Wilcox
Patch below is one out of a large series to mark kernel data const when possible, goal is to use .rodata and avoid false sharing Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] Simplify error handling a bitMatthew Wilcox
- to_do was never set to SYM_EH_DO_COMPLETE, so remove that code - move the spinlocks inside the common error handler code path Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] Use pcibios_resource_to_bus()Matthew Wilcox
We had our own code (pci_get_base_address()) to get the bus address of a BAR. We can get this using pcibios_resource_to_bus() instead. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] Change Kconfig option from IOMAPPED to MMIOMatthew Wilcox
Most of the Kconfig options for switching between IO Port and MMIO operations use the opposite sense from sym2. Really, this option should be set at a chipset level rather than per-driver. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14Merge ../linux-2.6James Bottomley
2006-02-28[SCSI] Fix uninitialised width and speed in sym2Matthew Wilcox
sym2 boards without NVRAM currently negotiate narrow due to this missed initialisation Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] Add spi_populate_*_msg functionsMatthew Wilcox
Introduce new helpers: - spi_populate_width_msg() - spi_populate_sync_msg() - spi_populate_ppr_msg() and use them in drivers which already enable the SPI transport. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-12[SCSI] sym2: Mask off opcode from RBCMatthew Wilcox
pm->sg.size is set from the Residual Byte Count register. However, the upper byte of the RBC is the opcode of the instruction that was executing, so we need to mask it off. This fixes some spurious rejects of IGNORE WIDE RESIDUE messages. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15[SCSI] Rename scsi_print_msg to spi_print_msgMatthew Wilcox
Rename scsi_print_msg to spi_print_msg and move its prototype from scsi_dbg.h to scsi_transport_spi.h Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>