aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2008-02-23fix vmsas.c file permissionsOliver Pinter
Signed-off-by: Oliver Pinter <oliver.pntr@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23mvsas: fix build warning, clean prototypesJeff Garzik
- Fix build 'make randconfig' build warning spotted by Toralf Foerster: drivers/scsi/mvsas.c: In function 'mvs_hexdump': drivers/scsi/mvsas.c:715: error: implicit declaration of function 'isalnum' - Remove unneeded prototypes (spotted by hch) Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (25 commits) [SCSI] qlogicpt: section fixes [SCSI] mvsas: convert from rough draft to working driver [SCSI] mvsas: Add Marvell 6440 SAS/SATA driver [SCSI] libsas: correctly flush the LU queue on error recovery [SCSI] aic94xx: fix sequencer hang on error recovery [SCSI] st: compile fix when DEBUG set to one [SCSI] stex: stex_internal_copy should be called with sg_count in struct st_ccb [SCSI] stex: stex_direct_copy shouldn't call dma_map_sg [SCSI] lpfc: Balance locking [SCSI] qla4xxx: fix up residual handling [SCSI] libsas: fix error handling [SCSI] arcmsr: fix message allocation [SCSI] mptbase: fix use-after-free's [SCSI] iscsi transport: make 2 functions static [SCSI] lpfc: make lpfc_disable_node() static [SCSI] ips: fix data buffer accessors conversion bug [SCSI] gdth: don't call pci_free_consistent under spinlock [SCSI] qla2xxx: fix compile warning for printk format [SCSI] aic7xx: mitigate HOST_MSG_LOOP invalid SCB ff panic [SCSI] scsi_debug: disable clustering ...
2008-02-23PM: Introduce PM_EVENT_HIBERNATE callback stateRafael J. Wysocki
During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23[SCSI] qlogicpt: section fixesAdrian Bunk
In current mainline, __devinit qpti_sbus_probe() still is calling __init qpti_chain_add(). Change occurrences of __init to __devinit to fix. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23[SCSI] mvsas: convert from rough draft to working driverKe Wei
Convert rough draft Marvell 6440 driver to a working driver. Added support for SAS and SATA devices, hotplug, wide port, and expanders. Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23[SCSI] mvsas: Add Marvell 6440 SAS/SATA driverJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] libsas: correctly flush the LU queue on error recoveryJames Bottomley
The current sas_scsi_clear_queue_lu() is wrongly checking for commands which match the pointer to the one passed in. It should be checking for commands which are on the same logical unit as the one passed in. Fix this by checking target pointer and LUN for equality. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] aic94xx: fix sequencer hang on error recoveryJames Bottomley
The clear nexus I_T and clear nexus I_T_L functions in the aic94xx specify the SUSPEND_TX flag which causes the sequencer to be suspended until it receives a RESUME_TX. Unfortunately, nothing ever sends the resume, so the sequencer on the link is stopped forever, leading to eventual timeouts and I/O errors. Since clear nexus commands are only executed as part of error recovery, it's perfectly fine to keep the sequencer running on the link ... as soon as the recovery function is completed, we'll send it the commands to retry. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] st: compile fix when DEBUG set to oneKai Makisara
Remove the now useless counting of adjacent pages from the debugging code in to make it compile when DEBUG is set non-zero. Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] stex: stex_internal_copy should be called with sg_count in struct st_ccbFUJITA Tomonori
stex_internal_copy copies an in-kernel buffer to a sg list by using scsi_kmap_atomic_sg. Some functions calls stex_internal_copy with sg_count in struct st_ccb, which is the value that dma_map_sg returned. However it might be shorter than the actual number of sg entries (if the IOMMU merged the sg entries). scsi_kmap_atomic_sg doesn't see sg->dma_length so stex_internal_copy should be called with the actual number of sg entries (i.e. scsi_sg_count), because if the sg entries were merged, stex_direct_copy wrongly think that the data length in the sg list is shorter than the actual length. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] stex: stex_direct_copy shouldn't call dma_map_sgFUJITA Tomonori
stex_direct_copy copies an in-kernel buffer to a sg list in order to spoof some SCSI commands. stex_direct_copy calls dma_map_sg and then stex_internal_copy with the value that dma_map_sg returned. It calls scsi_kmap_atomic_sg to copy data. scsi_kmap_atomic_sg doesn't see sg->dma_length so if dma_map_sg merges sg entries, stex_internal_copy gets the smaller number of sg entries than the acutual number, which means it wrongly think that the data length in the sg list is shorter than the actual length. stex_direct_copy shouldn't call dma_map_sg and it doesn't need since this code path doesn't involve dma transfers. This patch removes stex_direct_copy and simply calls stex_internal_copy with the actual number of sg entries. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] lpfc: Balance lockingMatthew Wilcox
Commit 3163f725a5d071eea1830bbbfab78cfe3fc9baaf introduced locking in lpfc_sli_hbqbuf_fill_hbqs, but missed unlocking on one exit. Reported-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] qla4xxx: fix up residual handlingDavid Somayajulu
the check in the residual case has an incorrect test of scsi_status (the logic is reversed, it should be scsi_status != 0 instead of !scsi_status. Since we checked a few lines above that scsi_status was non-zero, just eliminate this test Signed-off-by: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] libsas: fix error handlingJames Bottomley
The libsas error handler has two fairly fatal bugs 1. scsi_sas_task_done calls scsi_eh_finish_cmd() too early. This happens if the task completes after it has been aborted but before the error handler starts up. Because scsi_eh_finish_cmd() decrements host_failed and adds the task to the done list, the error handler start check (host_failed == host_busy) never passes and the eh never starts. 2. The multiple task completion paths sas_scsi_clear_queue_... all simply delete the task from the error queue. This causes it to disappear into the ether, since a command must be placed on the done queue to be finished off by the error handler. This behaviour causes the HBA to hang on pending commands. Fix 1. by moving the SAS_TASK_STATE_ABORTED check to an exit clause at the top of the routine and calling ->scsi_done() unconditionally (it is a nop if the timer has fired). This keeps the task in the error handling queue until the eh starts. Fix 2. by making sure every task goes through task complete followed by scsi_eh_finish_cmd(). Tested this by firing resets across a disk running a hammer test (now it actually survives without hanging the system) Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] arcmsr: fix message allocationDaniel Drake
arcmsr_iop_message_xfer() is called from atomic context under the queuecommand scsi_host_template handler. James Bottomley pointed out that the current GFP_KERNEL|GFP_DMA flags are wrong: firstly we are in atomic context, secondly this memory is not used for DMA. Also removed some unneeded casts. Signed-off-by: Daniel Drake <dsd@gentoo.org> Cc: Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] iscsi transport: make 2 functions staticAdrian Bunk
This patch makes the following needlessly global functions static: - __iscsi_unblock_session() - iscsi_session_state_name() Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] lpfc: make lpfc_disable_node() staticAdrian Bunk
This patch makes the needlessly global lpfc_disable_node() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-19[SCSI] ips: fix data buffer accessors conversion bugFUJITA Tomonori
This fixes a bug that can't handle a passthru command with more than two sg entries. Big thanks to Tim Pepper for debugging the problem. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-19libata: eliminate the home grown dma padding in favour ofJames Bottomley
that provided by the block layer ATA requires that all DMA transfers begin and end on word boundaries. Because of this, a large amount of machinery grew up in ide to adjust scatterlists on this basis. However, as of 2.5, the block layer has a dma_alignment variable which ensures both the beginning and length of a DMA transfer are aligned on the dma_alignment boundary. Although the block layer does adjust the beginning of the transfer to ensure this happens, it doesn't actually adjust the length, it merely makes sure that space is allocated for transfers beyond the declared length. The upshot of this is that scatterlists may be padded to any size between the actual length and the length adjusted to the dma_alignment safely knowing that memory is allocated in this region. Right at the moment, SCSI takes the default dma_aligment which is on a 512 byte boundary. Note that this aligment only applies to transfers coming in from user space. However, since all kernel allocations are automatically aligned on a minimum of 32 byte boundaries, it is safe to adjust them in this manner as well. tj: * Adjusting sg after padding is done in block layer. Make libata set queue alignment correctly for ATAPI devices and drop broken sg mangling from ata_sg_setup(). * Use request->raw_data_len for ATAPI transfer chunk size. * Killed qc->raw_nbytes. * Separated out killing qc->n_iter. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19block: add request->raw_data_lenTejun Heo
With padding and draining moved into it, block layer now may extend requests as directed by queue parameters, so now a request has two sizes - the original request size and the extended size which matches the size of area pointed to by bios and later by sgs. The latter size is what lower layers are primarily interested in when allocating, filling up DMA tables and setting up the controller. Both padding and draining extend the data area to accomodate controller characteristics. As any controller which speaks SCSI can handle underflows, feeding larger data area is safe. So, this patch makes the primary data length field, request->data_len, indicate the size of full data area and add a separate length field, request->raw_data_len, for the unmodified request size. The latter is used to report to higher layer (userland) and where the original request size should be fed to the controller or device. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-18[SCSI] gdth: don't call pci_free_consistent under spinlockJames Bottomley
The spinlock is held over too large a region: pscratch is a permanent address (it's allocated at boot time and never changes). All you need the smp lock for is mediating the scratch in use flag, so fix this by moving the spinlock into the case where we set the pscratch_busy flag to false. Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18[SCSI] qla2xxx: fix compile warning for printk formatFUJITA Tomonori
scsi/qla2xxx/qla_dfs.c: In function 'qla2x00_dfs_fce_show': scsi/qla2xxx/qla_dfs.c:26: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18[SCSI] aic7xx: mitigate HOST_MSG_LOOP invalid SCB ff panicJames Bottomley
The panic occurs if we get a MSGIN or MSGOUT for an unidentified SCB (meaning we didn't identify the outstanding command it was for). For MSGIN this is wrong because it could be an unsolicited negotiation MSGIN from the target. Still panic on unsolicited MSGOUT because this would represent a mistake in the negotiation phases. However, we should fix this as well. The specs say we should go to bus free for unexpected msgin. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18[SCSI] scsi_debug: disable clusteringFUJITA Tomonori
scsi_debug does at several places: for_each_sg(sdb->table.sgl, sg, sdb->table.nents, k) { kaddr = (unsigned char *) kmap_atomic(sg_page(sg), KM_USER0); We cannot do something like that with the clustering enabled (or we can use scsi_kmap_atomic_sg). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18[SCSI] fas216: fix up the previous fas216 commitJames Bottomley
Apparently the fix to [SCSI] fas216: Use scsi_eh API for REQUEST_SENSE invocation didn't show up in the final version sent to linus. Correct this omission. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18[SCSI] megaraid: outb_p exterminationAlan Cox
From conversations with the maintainers the _p isn't needed so kill it. That removes the last non ISA _p user from the SCSI layer to my knowledge. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: "Yang, Bo" <Bo.Yang@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18[SCSI] aic94xx: fix REQ_TASK_ABORT and REQ_DEVICE_RESETJames Bottomley
This driver has been failing under heavy load with aic94xx: escb_tasklet_complete: REQ_TASK_ABORT, reason=0x6 aic94xx: escb_tasklet_complete: Can't find task (tc=4) to abort! The second message is because the driver fails to identify the task it's being asked to abort. On closer inpection, there's a thinko in the for each task loop over pending tasks in both the REQ_TASK_ABORT and REQ_DEVICE_RESET cases where it doesn't look at the task on the pending list but at the one on the ESCB (which is always NULL). Fix by looking at the right task. Also add a print for the case where the pending SCB doesn't have a task attached. Not sure if this will fix all the problems, but it's a definite first step. Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18[SCSI] ses: fix data corruptionYinghai Lu
one system: initrd get courrupted: RAMDISK: Compressed image found at block 0 RAMDISK: incomplete write (-28 != 2048) 134217728 crc error VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 388k freed init_special_inode: bogus i_mode (177777) Warning: unable to open an initial console. init_special_inode: bogus i_mode (177777) init_special_inode: bogus i_mode (177777) Kernel panic - not syncing: No init found. Try passing init= option to kernel. bisected to commit 9927c68864e9c39cc317b4f559309ba29e642168 Author: James Bottomley <James.Bottomley@HansenPartnership.com> Date: Sun Feb 3 15:48:56 2008 -0600 [SCSI] ses: add new Enclosure ULD changes: 1. change char to unsigned char to avoid type change later. 2. preserve len for page1 3. need to move desc_ptr even the entry is not enclosure_component_device/raid. so keep desc_ptr on right position 4. record page7 len, and double check if desc_ptr out of boundary before touch. 5. fix typo in subenclosure checking: should use hdr_buf instead. [jejb: style fixes] Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-13[SCSI] gdth: update deprecated pci_find_deviceSergio Luis
Fix compilation warning in gdth.c, which was using the deprecated pci_find_device. drivers/scsi/gdth.c:645: warning: 'pci_find_device' is deprecated (declared at include/linux/pci.h:495) Changing it to use pci_get_device, instead. Signed-off-by: Sergio Luis <sergio@larces.uece.br> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-13[SCSI] gdth: scan for scsi devicesBoaz Harrosh
The patch: "gdth: switch to modern scsi host registration" missed one simple fact when moving a way from scsi_module.c. That is to call scsi_scan_host() on the probed host. With this the gdth driver from 2.6.24 is again able to see drives and boot. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Tested-by: Joerg Dorchain <joerg@dorchain.net> Tested-by: Stefan Priebe <s.priebe@allied-internet.ag> Tested-by: Jon Chelton <jchelton@ffpglobal.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-12[SCSI] sym53c416: fix module parametersJames Bottomley
It looks like there's been a bug in the module parameter setup forever. The upshot doesn't really matter, because even if no parameters are ever set, we just call sym53c416_setup() three times, but the zero values in the arrays eventually cause nothing to happen. Unfortunately gcc has started to notice this now too: drivers/scsi/sym53c416.c: In function 'sym53c416_detect': drivers/scsi/sym53c416.c:624: warning: the address of 'sym53c416' will always evaluate as 'true' drivers/scsi/sym53c416.c:630: warning: the address of 'sym53c416_1' will always evaluate as 'true' drivers/scsi/sym53c416.c:636: warning: the address of 'sym53c416_2' will always evaluate as 'true' drivers/scsi/sym53c416.c:642: warning: the address of 'sym53c416_3' will always evaluate as 'true' So fix this longstanding bug to keep gcc quiet. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Update lpfc driver version to 8.2.5James Smart
Update lpfc driver version to 8.2.5 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Fix buffer leaksJames Smart
Fix buffer leaks: - HBQ dma buffer leak at dma_pool_destroy when unloading driver - Fix missing buffer free in slow ring buffer handling Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Miscellaneous discovery FixesJames Smart
Miscellaneous discovery fixes: - Flush RSCN buffers on vports when reseting HBA. - Fix incorrect FLOGI after vport reg failed - Fix a potential fabric ELS race condition - Fix handling of failed PLOGI command under high lip rates - Fix FDISC handling - Fix debug logging for npiv handling Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Add MSI-X single message supportJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Miscellaneous FixesJames Smart
Miscellaneous fixes: - Fix ERRATT flag which was overlapping - Allow RESTART mbx commands through when stopped. - Accept incoming PLOGI when connected to an N_Port. - Fix NPort to NPort pt2pt problems: ADISC and reg_vpi issues - Fix vport unloading error that erroneously cleaned up RSCN buffers - Fix memory leak during repeated unloads - in mbox handling - Fix link bounce vs FLOGI race conditions Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Correct ndlp referencing issuesJames Smart
Correct ndlp referencing issues: - Fix ndlp kref issues due to race conditions between threads - Fix cancel els delay retry event which missed an ndlp reference count Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] aic94xx: fix ABORT_TASK define conflictBoaz Harrosh
include/scsi/scsi.h as a definition: #define ABORT_TASK 0x0d on the other hand drivers/scsi/aic94xx/aic94xx_sas.h has: #define ABORT_TASK 0x03 rename the latter to SCB_ABORT_TASK Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] fas216: Use scsi_eh API for REQUEST_SENSE invocationBoaz Harrosh
Use new scsi_eh_prep/restor_cmnd() for synchronous REQUEST_SENSE invocation. This also converts the driver to the new accessor based scatterlist implementation. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] ses: fix memory leaksYinghai Lu
fix leaking with scomp leaking when failing. Also free page10 on driver removal and remove one extra space. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] aacraid: informational sysfs value correctionsSalyzyn, Mark
Some sysfs problems reported. The serial number on late model controllers was truncated. Non-DASD devices (tapes and CDROMs) were showing up as JBOD in the level report on the physical channel. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] aacraid: ignore adapter reset check polaritySalyzyn, Mark
The Adapter's Ignore Reset flag and insmod parameter boolean polarity is incorrect in the driver. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] aacraid: add optional MSI supportSalyzyn, Mark
Added support for MSI utilizing the aacraid.msi=1 parameter. This patch adds some localized or like-minded janitor fixes. Since the default is disabled, there is no impact on the code paths unless the customer wishes to experiment with the MSI performance. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] MegaRAID driver management char device moved to miscThomas Horsten
The MegaRAID driver's common management module (megaraid_mm.c) creates a char device used by the management tool "megarc" from LSI Logic (and possibly other management tools). In 2.6 with udev, this device doesn't get created because it is not registered in sysfs. I first fixed this by registering a class "megaraid_mm", but realized that this should probably be moved to misc devices, instead of taking up a char major. This is because only 1 device is used, even if there are multiple adapters - the minor is never used (the adapter info is in the ioctl block sent to the driver, not detected based on the minor number as one might think). So it is a complete waste to have an entire major taken by this. So it now uses a misc device which I named "megadev0" (the name that megarc expects), and has a dynamic minor (previoulsy a dynamic major was used). I have tested this on my own system with the megarc tool, and it works just as fine as before (only now the device gets created correctly by udev). Acked-by: "Patro, Sumant" <Sumant.Patro@lsi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] advansys: fix overrun_buf aligned bugFUJITA Tomonori
struct asc_dvc_var needs overrun buffer to be placed on an 8 byte boundary. advansys defines struct asc_dvc_var: struct asc_dvc_var { ... uchar overrun_buf[ASC_OVERRUN_BSIZE] __aligned(8); The problem is that struct asc_dvc_var is placed on shost->hostdata. So if the hostdata is not on an 8 byte boundary, the advansys crashes. The hostdata is placed on a sizeof(unsigned long) boundary so the 8 byte boundary is not garanteed with x86_32. With 2.6.23 and 2.6.24, the hostdata is on an 8 byte boundary by chance, but with the current git, it's not. This patch removes overrun_buf static array and use kzalloc. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-09scsi: fix makefile for aic7(3*x)Sam Ravnborg
Fix bug introduced by my latest fix to the aic7xxx Makefile. Test build on x86 32 and 64 bit. Without and with -j (parallel build) Building firmaware is br0ken with O=... but this is unrelated to this bug-fix. Tested-by: Adrian Bunk <bunk@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-07Convert SG from nopage to fault.Nick Piggin
Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Douglas Gilbert <dougg@torque.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07[SCSI] aacraid: do not set valid bit in sense informationSalyzyn, Mark
Luben Tuikov [mailto:ltuikov@yahoo.com] sez: > Just as in your case and Tony's case, which I presume > uses the same RAID firmware vendor, it would've > probably been better if the RAID firmware vendor > fixed the firmware to not set the VALID bit if the > INFORMATION field is not valid. Point taken regarding the aacraid driver. Dropped the VALID bit, and then did some cleanup/simplification of the set_sense procedure and the associated parameters. Mike did some preliminary tests when the VALID bit was dropped before the 'Re: [PATCH] [SCSI] sd: make error handling more robust' patches came on the scene. The change in the SCSI subsystem does make this enclosed aacraid patch unnecessary, so this aacraid patch is merely post battle ground cleanup. If the simplification is an issue, repugnant, too much for a back-port to the stable trees or clouds the point, this patch could be happily distilled down to: diff -ru a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c --- a/drivers/scsi/aacraid/aachba.c 2008-02-06 16:26:45.834938955 -0500 +++ b/drivers/scsi/aacraid/aachba.c 2008-02-06 16:32:01.109035329 -0500 @@ -865,7 +865,7 @@ u32 residue) { - sense_buf[0] = 0xF0; /* Sense data valid, err code 70h (current error) */ + sense_buf[0] = 0x70; /* Sense data invalid, err code 70h (current error) */ sense_buf[1] = 0; /* Segment number, always zero */ if (incorrect_length) { Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07[SCSI] ses: add new Enclosure ULDJames Bottomley
This adds support to SCSI for enclosure services devices. It also makes use of the enclosure services added in an earlier patch to display the enclosure topology in sysfs. At the moment, the enclosures are SAS specific, but if anyone actually has a non-SAS enclosure that follows the SES-2 standard, we can add that as well. On my Vitesse based system, the enclosures show up like this: sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/ total 0 -r--r--r-- 1 root root 4096 2008-02-03 15:44 components lrwxrwxrwx 1 root root 0 2008-02-03 15:44 device -> ../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:12/end_device-0:0:12/target0:0:1/0:0:1:0 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 000 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 001 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 002 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 003 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 004 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 005 lrwxrwxrwx 1 root root 0 2008-02-03 15:44 subsystem -> ../../enclosure --w------- 1 root root 4096 2008-02-03 15:44 uevent And the individual occupied slots like this: sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/SLOT\ 001/ total 0 -rw-r--r-- 1 root root 4096 2008-02-03 15:45 active lrwxrwxrwx 1 root root 0 2008-02-03 15:45 device -> ../../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:11/end_device-0:0:11/target0:0:0/0:0:0:0 -rw-r--r-- 1 root root 4096 2008-02-03 15:45 fault -rw-r--r-- 1 root root 4096 2008-02-03 15:45 locate -rw-r--r-- 1 root root 4096 2008-02-03 15:45 status lrwxrwxrwx 1 root root 0 2008-02-03 15:45 subsystem -> ../../../enclosure_component -r--r--r-- 1 root root 4096 2008-02-03 15:45 type --w------- 1 root root 4096 2008-02-03 15:45 uevent You can flash the various blinky lights by echoing to the fault and locate files. >From the device's point of view, you can see it has an enclosure like this: sparkweed:~# ls /sys/class/scsi_disk/0\:0\:0\:0/device/ block:sda generic queue_depth state bsg:0:0:0:0 iocounterbits queue_type subsystem bus iodone_cnt rescan timeout delete ioerr_cnt rev type device_blocked iorequest_cnt scsi_device:0:0:0:0 uevent driver modalias scsi_disk:0:0:0:0 vendor enclosure_component:SLOT 001 model scsi_generic:sg0 evt_media_change power scsi_level Note the enclosure_component:SLOT 001 which shows where in the enclosure this device fits. The astute will notice that I'm using SCSI VPD Inquiries to identify the devices. This, unfortunately, won't work for SATA devices unless we do some really nasty hacking about on the SAT because the only think that knows the SAS addresses for SATA devices is libsas, not libata where the SAT resides. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>