aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2005-08-01[PATCH] aacraid: Fix for controller load based timeoutsMark Haverkamp
Martin Drab found that he could get aacraid timeouts with high load on his controller / disk drive combinations. After some experimentation Mark Salyzyn has come up with a patch to reduce the default max_sectors to something that will keep the controller from being overloaded and will eliminate the timeout issues. Signed-off-by: Mark Haverkamp <markh@osdl.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-31libata: trim trailing whitespace.Jeff Garzik
Also, fixup a tabs-to-spaces block of code in ata_piix.
2005-07-31[PATCH] sata_nv: Support MCP51/MCP55 device IDsDaniel Drake
This is a multi-part message in MIME format. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31[PATCH] SCSI_SATA has to be a tristateAdrian Bunk
SCSI=m must disallow static drivers. The problem is that all the SATA drivers depend on SCSI_SATA. With SCSI=m and SCSI_SATA=y this allows the static enabling of the SATA drivers with unwanted effects, e.g.: - SCSI=m, SCSI_SATA=y, SCSI_ATA_ADMA=y -> SCSI_ATA_ADMA is built statically but scsi/built-in.o is not linked into the kernel - SCSI=m, SCSI_SATA=y, SCSI_ATA_ADMA=y, SCSI_SATA_AHCI=m -> SCSI_ATA_ADMA and libata are built statically but scsi/built-in.o is not linked into the kernel, SCSI_SATA_AHCI is built modular (unresolved symbols due to missing libata) Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[SCSI] aic7xxx: fix bug in DT handingJames Bottomley
Basically DT isn't reported or handled at all. The problem is that lines of code like this: spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ; don't do what you think they do when spi_dt is a single bit variable. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30[SCSI] scsi/ibmvscsi/srp.h: Fix a wrong type code used for SRP_LOGIN_REJLinda Xie
This patch fixes srp.h which uses 0x80 for SRP_LOGIN_REJ instead of 0xc2. Signed-off-by: Linda Xie <lxie@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-29Merge head 'upstream' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-07-28libata: Check PCI sub-class code before disabling AHCIGreg Felix
This patch adds functionality to check the PCI sub-class code of an AHCI capable device before disabling AHCI. It fixes a bug where an ICH7 sata controller is being setup by the BIOS as sub-class 1 (ide) and the AHCI control registers weren't being initialized, thus causing an IO error in piix_disable_ahci(). Signed-off-by: Gregory Felix <greg.felix@gmail.com>
2005-07-27[PATCH] More qla2xxx configuration fixesAndrew Vasquez
This adds the appropriate FW_LOADER pre-requisite and a separate entry for ISP24xx support. Thanks to Adrian Bunk and Jesper Juhl for their efforts in fixing this quirk. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27Fix up qla2xxx configuration bogosityLinus Torvalds
If we haven't configured the qla24xx driver, then the Makefile shouldn't do it for us. This also means that we can avoid the unnecessary selection of FC_ATTRS. Debugged by James Bottomley
2005-07-27[PATCH] clean up inline static vs static inlineJesper Juhl
`gcc -W' likes to complain if the static keyword is not at the beginning of the declaration. This patch fixes all remaining occurrences of "inline static" up with "static inline" in the entire kernel tree (140 occurrences in 47 files). While making this change I came across a few lines with trailing whitespace that I also fixed up, I have also added or removed a blank line or two here and there, but there are no functional changes in the patch. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] turn many #if $undefined_string into #ifdef $undefined_stringOlaf Hering
turn many #if $undefined_string into #ifdef $undefined_string to fix some warnings after -Wno-def was added to global CFLAGS Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] scsi_scan: check return code from scsi_sysfs_add_sdevAlan Stern
Adds a missing check for an error return code from scsi_sysfs_add_sdev. This resolves entry #4863 in the OSDL bugzilla. Although in that bug report the failure occurred because of a confusion over scanning vs. rescanning, in general add_sdev can fail for a number of reasons (the simplest being insufficient memory) and the caller should cope properly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26Fix compiler warning in qla_iocb.cLinus Torvalds
Remove bogus initialization that was re-done (correctly) later.
2005-07-26[PATCH] qla2xxx: Kconfig dependency fixAndrew Morton
*** Warning: "fc_remote_port_block" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "scsi_is_fc_rport" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remote_port_unblock" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remote_port_rolechg" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_release_transport" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remove_host" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remote_port_add" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_attach_transport" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] qla: remove anonymous unionAndrew Morton
Older gcc's dont support anonymous unions, so this driver gets hundreds of error. Fortunately the fix is easy... Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6Linus Torvalds
2005-07-14[SCSI] Redundant this_count check in sd_init_command()Chen, Kenneth W
I was going over the scsi I/O submit path, when sd_init_command construct the scsi command, this_count is already checked in the previous else if clause. Why does it need to check it again in the last else block? Patch to delete the spurious check. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] Redundant memset in scsi_alloc_sgtableChen, Kenneth W
scsi_init_io calls scsi_alloc_sgtable and then calls blk_rq_map_sg to initialize the scatterlist structure. blk_rq_map_sg() already memset the structure for every new segment. That makes the memset in scsi_alloc_sgtable unnecessary. Patch to delete the extra memset in scsi_alloc_sgtable. Tested on a x86_64 machine. Looks stable to me. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] add int_to_scsilun() functionJames.Smart@Emulex.Com
One of the issues we had was reverting the midlayers lun value into the 8byte lun value that we wanted to send to the device. Historically, there's been some combination of byte swapping, setting high/low, etc. There's also been no common thread between how our driver did it and others. I also got very confused as to why byteswap routines were being used. Anyway, this patch is a LLDD-callable function that reverts the midlayer's lun value, stored in an int, to the 8-byte quantity (note: this is not the real 8byte quantity, just the same amount that scsilun_to_int() was able to convert and store originally). This also solves the dilemma of the thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=112116767118981&w=2 A patch for the lpfc driver to use this function will be along in a few days (batched with other patches). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Cleanup FC remote port registration.Andrew Vasquez
Cleanup FC remote port registration. Due to the inherent behaviour (an immediate scan) of adding a 'target'-role-capable rport via fc_remote_port_add(), split the registration into two steps -- addition as unknown-type role, then use fc_remote_port_rolchg() with appropriate role (based on PLOGI/PRLI bits). This allows for a more cleaner rport->dd_data management as can be seen with the simplified qla2xxx_slave_alloc() function. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Consolidate ISP24xx chip reset logic.Andrew Vasquez
Consolidate ISP24xx chip reset logic. Consolidate near-duplicate RISC reset logic from qla24xx_reset_chip() and qla24xx_chip_diag(). Also, after initiating a soft-reset, insure the firmware has completed all NVRAM accesses before continuing. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add firmware version number to qla24xx_fw_version_str().Andrew Vasquez
Add firmware version number to qla24xx_fw_version_str(). Original code was accidently trimmed during port. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] aacraid: Fix sgmap errorMark Haverkamp
The wrong sgmap structure is being assigned in aac_send_raw_srb. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Update version number to 8.01.00b5-k.Andrew Vasquez
Update version number to 8.01.00b5-k. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Correct maximum supported lun and target-id definitions.Andrew Vasquez
Correct maximum supported lun and target-id definitions. The driver uses command-IOCBs which support a maximum lun value of 0xffff -- correct #define to reflect the change. Also, remove superfluous MAX_TARGET definition. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Update copyright banner.Andrew Vasquez
Update copyright banner. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Firmware updates.Andrew Vasquez
Firmware updates. Resync with latest 21xx firmware -- 1.19.25. Resync with latest 22xx firmware -- 2.02.08. Resync with latest 23xx/63xx firmware -- 3.03.15. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Code scrubbing.Andrew Vasquez
Code scrubbing. - Remove trailing whitespace from driver files. - Remove unused #defines and inlines. - Standardize on C comments (// -> /* */) Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: NVRAM id-list updates.Andrew Vasquez
NVRAM id-list updates. Resync with latest NVRAM subsystem ID list. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add OS initialization codes for ISP24xx recognition.Andrew Vasquez
Add OS initialization codes for ISP24xx recognition. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx initialization routines.Andrew Vasquez
Add ISP24xx initialization routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx ISR routines.Andrew Vasquez
Add ISP24xx ISR routines. Add appropriate glue-code for ISP24xx support -- this included generalizing some of the core handling routines (qla2x00_async_event() [pull-up retrieval of mailbox values] and qla2x00_status_entry()]. Fixup 2100/2300 ISRs to handle the new conventions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx IOCB manipulation routines.Andrew Vasquez
Add ISP24xx IOCB manipulation routines. Add appropriate glue-code for ISP24xx support while manipulting IOCB packets. Add an ISP24xx specific 'start_scsi' routine due to command-type-7 layout changes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx flash-manipulation routines.Andrew Vasquez
Add ISP24xx flash-manipulation routines. Add read/write flash manipulation routines for the ISP24xx. Update sysfs NVRAM objects to use generalized accessor functions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add MBX command routines for ISP24xx support.Andrew Vasquez
Add MBX command routines for ISP24xx support. Generalize several routines [qla2x00_load_ram_ext(), qla2x00_execute_fw(), qla2x00_verify_checksum()] to handle larger addressing space. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Generalize SNS generic-services routines.Andrew Vasquez
Generalize SNS generic-services routines. Consolidate completion-status checking while adding support for the ISP24xx. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx diagnostic routines.Andrew Vasquez
Add ISP24xx diagnostic routines. Add function and structure definitions for the ISP24xx diagnostic firmware dump routines. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add ISP24xx definitions.Andrew Vasquez
Add ISP24xx definitions. Add requisite structure definitions and #define's for ISP24xx support. Also drop volatile modifiers from device_reg_* register layouts as the members are never really accessed, only their offsets within the layout are used during reads and writes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Add pci ids for new ISP types.Andrew Vasquez
Add pci ids for new ISP types. Move old definitions in local qla_def.h file to pci_ids.h as well. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables.Andrew Vasquez
Factor-out ISP specific functions to method-based call tables. In anticipation of ISP24xx/ISP25xx support, factor-out ISP specific functions into a method-based call table. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-12[PATCH] aacraid: swapped kmalloc args.Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-11[SCSI] SPI transport class, don't negotiate options not supportedJames Bottomley
At the moment, the transport class blindly tries to set things like QAS and IU, even if the drive won't support them. It's best not to annoy the devices like this and instead only set what the drive says is actually supported. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] aic7xxx: remove ahc_tailqChristoph Hellwig
now that we do normal PCI probing there's no need to keep a list of all HBAs. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] aic7xxx: sane pci probingChristoph Hellwig
always probe in bus order, avoid any reordering Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] add TYPE_RBC to our type tableJames Bottomley
Here's a tiny update that means we print the correct ASCII type information Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] dpt_i2o warning fixAndrew Morton
drivers/scsi/dpt_i2o.c: In function `adpt_queue': drivers/scsi/dpt_i2o.c:385: warning: unused variable `timeout' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] aic79xx: ahd_linux_dev_reset() cleanupAndrew Morton
Use the macros consistently in ahd_linux_dev_reset(). If ahd_linux_dev_reset() really can be called with local interrupts disabled then yuk. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-07[PATCH] pcmcia: remove references to pcmcia/version.hDominik Brodowski
As a follow-up, remove the inclusion of pcmcia/version.h in many files. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] pcmcia: remove client services version (fix)Pavel Roskin
One correction is needed. Changes are not needed for drivers/scsi/pcmcia/nsp_cs.c because it uses versioning in the compatibility part, which is never used in 2.6 kernels. The only right thing we could to that compatibility code would be to remove it throughout the file, but that would be a separate patch. Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 18:41:10 +0000