aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2006-06-25[PATCH] advansys section fixesRandy Dunlap
Priority: not critical. Mark 3 functions __init. Saves a little memory. This makes these functions' calls to AdvWaitEEPCmd() (which is __init) be clean (i.e., eliminates text -> init -> text call chain). Fix multiple section mismatch warnings: WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a22) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a4e) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7a79) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7aa2) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet3550EEPConfig' (at offset 0x7abb) and 'AdvSet38C0800EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7ae0) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b0c) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b37) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b60) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C0800EEPConfig' (at offset 0x7b79) and 'AdvSet38C1600EEPConfig' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7b9e) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bca) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7bf5) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c1e) and 'AdvExeScsiQueue' WARNING: drivers/scsi/advansys.o - Section mismatch: reference to .init.text: from .text between 'AdvSet38C1600EEPConfig' (at offset 0x7c37) and 'AdvExeScsiQueue' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] megaraid_mbox: fix section mismatch warningsRandy Dunlap
Fix section warning: WARNING: drivers/scsi/megaraid/megaraid_mbox.o - Section mismatch: reference to .init.text: from .text between 'megaraid_probe_one' (at offset 0x171e) and 'megaraid_queue_command' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] wd7000: fix section mismatch warningsRandy.Dunlap
From: Randy Dunlap <rdunlap@xenotime.net> Fix section mismatch in wd7000 driver: WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xa5d) WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xab6) WARNING: drivers/scsi/wd7000.o - Section mismatch: reference to .init.text: from .text after 'wd7000_detect' (at offset 0xb67 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68k: convert mac irq codeRoman Zippel
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68k: Add the generic dma API functionsRoman Zippel
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[SCSI] qlogicpti: Convert to new SBUS device framework.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SCSI] esp: Fix bug in esp_remove_common.David S. Miller
Do not try to kfree(esp), scsi_host_put() takes care of that. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23[SCSI] sparc: Port esp to new SBUS driver layer.David S. Miller
This also turns the driver into a new-style scsi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (258 commits) [libata] conversion to new debug scheme, part 1 of $N [PATCH] libata: Add ata_scsi_dev_disabled [libata] Add host lock to struct ata_port [PATCH] libata: implement per-dev EH action mask eh_info->dev_action[] [PATCH] libata-dev: move the CDB-intr DMA blacklisting [PATCH] ahci: disable NCQ support on vt8251 [libata] ahci: add JMicron PCI IDs [libata] sata_nv: add PCI IDs [libata] ahci: Add NVIDIA PCI IDs. [PATCH] libata: convert several bmdma-style controllers to new EH, take #3 [PATCH] sata_via: convert to new EH, take #3 [libata] sata_nv: s/spin_lock_irqsave/spin_lock/ in irq handler [PATCH] sata_nv: add hotplug support [PATCH] sata_nv: convert to new EH [PATCH] sata_nv: better irq handlers [PATCH] sata_nv: simplify constants [PATCH] sata_nv: kill struct nv_host_desc and nv_host [PATCH] sata_nv: kill not-working hotplug code [libata] Update docs to reflect current driver API [PATCH] libata: add host_set->next for legacy two host_sets case, take #3 ...
2006-06-23[PATCH] More BUG_ON conversionEric Sesterhenn
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] vfs: add lock owner argument to flush operationMiklos Szeredi
Pass the POSIX lock owner ID to the flush operation. This is useful for filesystems which don't want to store any locking state in inode->i_flock but want to handle locking/unlocking POSIX locks internally. FUSE is one such filesystem but I think it possible that some network filesystems would need this also. Also add a flag to indicate that a POSIX locking request was generated by close(), so filesystems using the above feature won't send an extra locking request in this case. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: wd33c93: extra delayRoman Zippel
The wd33c93 needs a small delay before a new command can be started. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[libata] conversion to new debug scheme, part 1 of $NBorislav Petkov
The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22[PATCH] libata: Add ata_scsi_dev_disabledBrian King
Separate out parts of ata_scsi_find_dev to be reused in future SAS/SATA patches. Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22[libata] Add host lock to struct ata_portJeff Garzik
Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22[PATCH] libata: implement per-dev EH action mask eh_info->dev_action[]Tejun Heo
Currently, the only per-dev EH action is REVALIDATE. EH used to exploit ehi->dev to do selective revalidation on a ATA bus. However, this is a bit hacky and makes it impossible to request selective revalidation from outside of EH or add another per-dev EH action. This patch adds per-dev EH action mask eh_info->dev_action[] and update EH to use this field for REVALIDATE. Note that per-dev actions can still be specified at port-level and it has the same effect of specifying the action for all devices on the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22[PATCH] libata-dev: move the CDB-intr DMA blacklistingAlbert Lee
Move the DMA blacklisting of the CDB-intr devices from ata_check_atapi_dma() to ata_dma_blacklisted(), where it makes more sense. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22[PATCH] ahci: disable NCQ support on vt8251Tejun Heo
vt8251 chokes on NCQ commands. Two different disks from different vendors are showing the same symptom and it seems that the windows driver from via doesn't support NCQ either. Disable NCQ support on this controller for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Aalderd Bouwman <boac@wanadoo.nl> Cc: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22[libata] ahci: add JMicron PCI IDsJeff Garzik
Originally contributed by Justin @ JMicron. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22[libata] sata_nv: add PCI IDsJeff Garzik
Based on a patch contributed by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22[libata] ahci: Add NVIDIA PCI IDs.Jeff Garzik
Based on a patch by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22Merge branch 'master' into upstreamJeff Garzik
Conflicts: drivers/scsi/libata-core.c drivers/scsi/libata-scsi.c include/linux/pci_ids.h
2006-06-22IB/iser: iSER Kconfig and MakefileOr Gerlitz
Kconfig and Makefile for iSER. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-21[PATCH] PCI: Move various PCI IDs to header fileBrent Casavant
Move various QLogic, Vitesse, and Intel storage controller PCI IDs to the main header file. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits) [SCSI] 53c700: remove reliance on deprecated cmnd fields [SCSI] hptiop: don't use cmnd->bufflen [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver [SCSI] aacraid: small misc. cleanups [SCSI] aacraid: Update supported product information [SCSI] aacraid: Fix return code interpretation [SCSI] scsi_transport_sas: fix panic in sas_free_rphy [SCSI] remove RQ_SCSI_* flags [SCSI] remove scsi_request infrastructure [SCSI] mptfusion: change driver revision to 3.03.10 [SCSI] mptfc: abort of board reset leaves port dead requiring reboot [SCSI] mptfc: fix fibre channel infinite request/response loop [SCSI] mptfc: set fibre channel fw target missing timers to one second [SCSI] mptfusion: move fc event/reset handling to mptfc [SCSI] spi transport: don't allow dt to be set on SE or HVD buses [SCSI] aic7xxx: expose the bus setting to sysfs [SCSI] scsi: remove Documentation/scsi/cpqfc.txt [SCSI] drivers/scsi: Use ARRAY_SIZE macro [SCSI] Remove last page_address from dc395x.c [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver ... Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to the sparc interrupt cleanups)
2006-06-20[PATCH] libata: convert several bmdma-style controllers to new EH, take #3Tejun Heo
Convert sata_sis, svw, uli and vsc drivers to new EH. All the drivers used to specify ATA_FLAG_SATA_RESET to tell libata to use SATA hardreset instead of SRST. This patch makes all the converted drivers use the standard bmdma error handler which uses both SRST and SATA hardreset. All the controllers should be able to perform SRST but still needs verification. If some of the controllers can't do SRST, it will be very easy to spot as it will show up during boot probing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[PATCH] sata_via: convert to new EH, take #3Tejun Heo
Convert sata_via to new EH. vt6420 used ATA_FLAG_SRST while vt6421 used ATA_FLAG_SATA_RESET. This difference seems to be an accident rather than intended. This patch makes both flavors use ata_bmdma_error_handler() which makes use of both SRST and SATA hardreset. This behavior change is intended and if it breaks anything, it should be very easy to spot. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[libata] sata_nv: s/spin_lock_irqsave/spin_lock/ in irq handlerJeff Garzik
We don't need to use the heavier spin lock in the irq handler. It's quite possible we can do this in nv_generic_interrupt() as well, but I didn't take the time to pursue that train of thought. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[PATCH] sata_nv: add hotplug supportTejun Heo
Add hotplug support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[PATCH] sata_nv: convert to new EHTejun Heo
Convert to new EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[PATCH] sata_nv: better irq handlersTejun Heo
nf2/3 and ck804 have irq status register. Implement better irq handler for those flavors of nv. This patch makes different flavors of nv controllers use different irq handlers by using separate port_info for each flavor. This change also makes following EH and hotplug updates easier to integrate. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[PATCH] sata_nv: simplify constantsTejun Heo
Simplify interrupt constants and make NFORCE3 equal to NFORCE2. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[PATCH] sata_nv: kill struct nv_host_desc and nv_hostTejun Heo
nv_host_desc and nv_host are used to discern different generations of nv controllers. Kill those. New EH/hotplug implementation will use standard port_info/ata_port_operations for that. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[PATCH] sata_nv: kill not-working hotplug codeTejun Heo
sata_nv contained hotplug code which is mainly for demonstrating how hotplug event is handled. This patch kills the demo code in prepration for real hotplug implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20[SPARC]: Kill __irq_itoa().David S. Miller
This ugly hack was long overdue to die. It was a way to print out Sparc interrupts in a more freindly format, since IRQ numbers were arbitrary opaque 32-bit integers which vectored into PIL levels. These 32-bit integers were not necessarily in the 0-->NR_IRQS range, but the PILs they vectored to were. The idea now is that we will increase NR_IRQS a little bit and use a virtual<-->real IRQ number mapping scheme similar to PowerPC. That makes this IRQ printing hack irrelevant, and furthermore only a handful of drivers actually used __irq_itoa() making it even less useful. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-19Improve SATA core suspend/resumeLinus Torvalds
Doing a full ata_busy_sleep() seems to get suspend and resume working fine on the Apple Mac Mini, at least. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-19[SCSI] 53c700: remove reliance on deprecated cmnd fieldsJames Bottomley
This one's quite tricky. The 53c700 uses the now deprecated fields of the command structure for saving the prior command when it does autosense. To fix this, we have to add extra fields to the LUN to accommodate a copy of the real command. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-19[SCSI] hptiop: don't use cmnd->bufflenJames Bottomley
use cmnd->request_bufflen instead. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-19[SCSI] hptiop: HighPoint RocketRAID 3xxx controller driverHighPoint Linux Team
Updates: - don't bypass SYNCHRONIZE_CACHE command - return SCSI_MLQUEUE_HOST_BUSY when no free request slots - move scsi_remove_host() to the begin of hpt_remove(), or it will not work after resources being released. Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-19[SCSI] aacraid: small misc. cleanupsMark Haverkamp
Received from Mark Salyzyn Spelling correction, orphaned comment removal & update branch name. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-19[SCSI] aacraid: Update supported product informationMark Haverkamp
Received From Mark Salyzyn Some of the cards product names changed. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-13[libata] Update docs to reflect current driver APIJeff Garzik
2006-06-12[SCSI] aacraid: Fix return code interpretationMark Haverkamp
Received from Mark Salyzyn clear_user return is 0 for success, the code fragment is written to assume that it is the count of the number of bytes zero'd. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-12[SCSI] scsi_transport_sas: fix panic in sas_free_rphyJames Bottomley
This is a hold over from the end device/expander conversion. Apparently the rphy list pointer is never initialised, so list_del() on the uninitialised pointer can panic the system Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-12[PATCH] libata: add host_set->next for legacy two host_sets case, take #3Tejun Heo
For a legacy ATA controller, libata registers two separate host sets. There was no connection between the two hosts making it impossible to traverse all ports related to the controller. This patch adds host_set->next which points to the second host_set and makes ata_pci_remove_one() remove all associated host_sets. * On device removal, all ports hanging off the device are properly detached. Prior to this patch, ports on the first host_set weren't detached casuing oops on driver unloading. * On device removal, both host_sets are properly freed This will also be used by new power management code to suspend and resume all ports of a controller. host_set/port representation will be improved to handle legacy controllers better and this host_set linking will go away with it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-12[PATCH] libata: fix oops caused rescanning NULL sdevTejun Heo
Depending on timing, ata_scsi_dev_rescan() might encounter a device which is enabled but not yet attached to sdev. On such cases, the original code caused oops. This patch makes ata_scsi_dev_rescan() rescan only device which are attached to sdevs. While at it, properly indent leading comment and add description about how it's synchronized with sdev attach/detach. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-12[PATCH] sata_sil: update device hotplug handling, take #2Tejun Heo
SIEN on some 3112 controllers doesn't mask SATA IRQ properly. IRQ stays asserted even after SIEN is masked and IRQ is acked. Also, even while frozen, any SATA PHY event including hardreset raises SATA IRQ. Clearing SError seems to be the only way to deassert SATA IRQ. This patch makes sil_host_intr() clear SError on SATA IRQs and ignore SATA IRQs reported while frozen so that hardreset doesn't trigger hotplug event (which ends up hardresetting again). In such cases, the port still gets re-frozen to minimize the danger of screaming interrupts. This results in one nil EH repeat on controllers with broken SIEN but other than that does no harm. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-12[PATCH] libata: fast exit from EH while unloadingTejun Heo
Make EH exit fast if the port is being unloaded. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-12[PATCH] libata: fix ATA_EH_REVALIDATE clearingTejun Heo
ATA_EH_REVALIDATE should be cleared after all devices on the target port have been revalidated. Fix ata_eh_revalidate_and_attach() accordingly. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-12[PATCH] libata: fix comment above ata_exec_internal()Tejun Heo
Add RETURNS comment above ata_exec_internal() and kill extra blank line. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 21:46:52 +0000