aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2007-06-04Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] JAZZ ESP and SUN ESP need SPI_ATTRS [SCSI] atari_NCR5380: update_timeout removal [SCSI] aacraid: fix shutdown handler to also disable interrupts. [SCSI] qla2xxx: fix timeout in qla2x00_down_timeout [SCSI] fix CONFIG_SCSI_WAIT_SCAN=m
2007-06-04[SCSI] JAZZ ESP and SUN ESP need SPI_ATTRSDavid S. Miller
Reported by Meelis Roos. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-04[SCSI] atari_NCR5380: update_timeout removalMichael Schmitz
Atari SCSI driver fixes: remove update_timeout kludge Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] aacraid: fix shutdown handler to also disable interrupts.Salyzyn, Mark
Moves quiesce, thread and interrupt shutdown into aacraid drivers' .shutdown handler. This fix to the aac_shutdown handler will remove the superfluous reset of the adapter during a (clean) kexec. This fix may mitigate the active investigation 'kexec and aacraid broken' but it is unlikely to affect the root cause (issue likely present in both kexec and kdump). This patch reduces the chance the problem will occur with a kexec. The fix for root cause is currently expected to be the minimum value check to the aacraid.startup_timeout driver variable after an adapter reset within aacraid_commit_reset.patch submitted on 05/22/2007 and awaiting testing by Yinghai to confirm. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01parse errors in ifdefsYoann Padioleau
Fix various bits of obviously-busted code which we're not happening to compile, due to ifdefs. Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Jan Kara <jack@ucw.cz> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01potential parse error in ifdefYoann Padioleau
I have made a tool to parse the kernel that does not pre-process the source. That means that my parser tries to parse all the code, including code in the #else branch or code that is not often compiled because the driver is not very used (or not used at all). So, my parser sometimes reports parse error not originally detected by gcc. Here is my (first) patch. [akpm@linux-foundation.org: fix amd8111e.c] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Acked-by: Matthew Wilcox <matthew@wil.cx> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: James Bottomley <James.Bottomley@steeleye.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-30[SCSI] qla2xxx: fix timeout in qla2x00_down_timeoutBill Nottingham
iterations is unsigned, so it is impossible to get out of the loop and return -ETIMEDOUT. Signed-off-by: Bill Nottingham <notting@redhat.com> Acked-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30[SCSI] fix CONFIG_SCSI_WAIT_SCAN=mHugh Dickins
CONFIG_MODULES=y CONFIG_SCSI=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_WAIT_SCAN=m 2.6.21-rc5-mm2 VFS panics unable to find my root on /dev/sda2, but boots okay if I change drivers/scsi/Kconfig to "default y" instead of "default m" for SCSI_WAIT_SCAN. Make sure there's a late_initcall to scsi_complete_async_scans when it's built in, so a monolithic SCSI_SCAN_ASYNC kernel can rely on the scans being completed before trying to mount root, even if they're slow. [akpm@linux-foundation.org: build fixes] Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-29Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fill holes in hypervisor APIs and fix KTSB registry. [SPARC64]: Fix two bugs wrt. kernel 4MB TSB. [SPARC]: Mark as emulating cmpxchg, add appropriate depends for DRM. [SPARC]: Emulate cmpxchg like parisc [SPARC64]: Fix _PAGE_EXEC_4U check in sun4u I-TLB miss handler. [SPARC]: Linux always started with 9600 8N1 [SPARC64]: arch/sparc64/time.c doesn't compile on Ultra 1 (no PCI) [SPARC64]: Eliminate NR_CPUS limitations. [SPARC64]: Use machine description and OBP properly for cpu probing. [SPARC64]: Negotiate hypervisor API for PCI services. [SPARC64]: Report proper system soft state to the hypervisor. [SPARC64]: Fix typo in sun4v_hvapi_register error handling. [SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_esp [SCSI] jazz_esp: Converted to use esp_core. [SPARC64]: PCI device scan is way too verbose by default. [SERIAL] sunzilog: section mismatch fix [SPARC32]: Removes mismatch section warnigs in sparc time.c file [SPARC64]: Don't be picky about virtual-dma values on sun4v. [SPARC64]: Kill unused DIE_PAGE_FAULT enum value. [SCSI] pluto: Use wait_for_completion_timeout.
2007-05-29Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] megaraid_sas: intercept cmd timeout and throttle io [SCSI] fusion: Fix |/|| confusion [SCSI] aic94xx: asd_clear_nexus should fail if the cleared task does not complete [SCSI] aic7xxx: fix aicasm build failure with gcc-3.4.6 [SCSI] aacraid: apply commit config for reset_devices flag [SCSI] sd: fix refcounting regression in suspend/resume routines [SCSI] aacraid: fix panic on short Inquiry [SCSI] aacraid: Correct sa platform support. (Was: [Bug 8469] Bad EIP value on pentium3 SMP kernel-2.6.21.1) [SCSI] NCR53C9x: correct spelling mistake in deprecation notice [SCSI] tgt: fix a rdma indirect transfer error bug [SCSI] MegaRAID: Update MAINTAINERS email-id [SCSI] stex: minor cleanup and version update [SCSI] stex: fix reset recovery for console device [SCSI] stex: extend hard reset wait time [SCSI] stex: fix id mapping issue [SCSI] ipr: Proper return codes for eh_dev_reset for SATA devices [SCSI] zfcp: IO stall after deleting and path checker changes after reenabling zfcp devices [SCSI] zfcp: avoid clutter in erp_dbf
2007-05-29[SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_espDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29[SCSI] jazz_esp: Converted to use esp_core.Thomas Bogendoerfer
Use new esp_scsi for JAZZ SCSI host adapter driver Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29[SCSI] pluto: Use wait_for_completion_timeout.Christoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-24[SCSI] megaraid_sas: intercept cmd timeout and throttle ioSumant Patro
eh_timed_out call back (megasas_reset_timer) is used to throttle io to the adapter when it is called the first time for a scmd. The MEGASAS_FW_BUSY flag is set and can_queue reduced to 16. The can_queue is restored from completion routine in following two conditions : 5 seconds has elapsed and the # of outstanding cmds in FW is < 17. Signed-off-by: Sumant Patro <sumant.patro@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-22[SCSI] aic94xx: asd_clear_nexus should fail if the cleared task does not ↵Darrick J. Wong
complete Every so often, the driver will call asd_clear_nexus to clean out a task. It is supposed to be the case that the CLEAR NEXUS does not go on the done list until after the task itself has been put on the done list, but for some reason this doesn't always happen. Thus, the wait_for_completion_timeout call times out, and we return success. This makes libsas free the task even though the task hasn't completed, leading to a BUG_ON message from aic94xx_hwi.c around line 341. We should return failure from asd_clear_nexus so that libsas tries again; at a bare minimum it shouldn't be freeing active tasks. I _think_ this will fix one of the SCB timeout crash problems (though I've not been able to reproduce it lately...) Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-22[SCSI] aic7xxx: fix aicasm build failure with gcc-3.4.6James Bottomley
On Tue, 2007-05-22 at 06:51 -0500, Bob Tracy wrote: > Second try: originally reported this back on April 17th. 2.6.X > kernel builds started failing after I upgraded my compiler from > gcc-3.3.X to gcc-3.4.6: > > make -C drivers/scsi/aic7xxx/aicasm > (...) > gcc -I/usr/include -I. aicasm.c aicasm_symbol.c aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c -o aicasm -ldb > aicasm_gram.y:1948: error: conflicting types for 'yyerror' > aicasm_gram.tab.c:3004: error: previous implicit declaration of 'yyerror' was here > aicasm_macro_gram.y:162: error: conflicting types for 'mmerror' > aicasm_macro_gram.tab.c:1196: error: previous implicit declaration of 'mmerror' was here Fix is to add a prototype for yyerror and mmerror to the relevant files. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-22[SCSI] aacraid: apply commit config for reset_devices flagSalyzyn, Mark
Under some conditions associated with the unclean transition to kdump, the aacraid adapters will view the array as foreign and not export it to prevent access and data manipulation. The solution is to submit a commit configuration to export the devices since this is a expected behavior when transitioning to a kdump kernel. This patch adds the aacraid.reset_devices flag and when either this or the global reset_devices flag is set, ensures that a commit config is issued and extends the startup_timeout if it is set less than 5 minutes. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-22[SCSI] sd: fix refcounting regression in suspend/resume routinesAlan Stern
This patch (as909) fixes a couple of refcounting errors in the sd driver's suspend and resume methods. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-21Detach sched.h from mm.hAlexey Dobriyan
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-16[SCSI] aacraid: fix panic on short InquiryJames Bottomley
Unable to handle kernel paging request at ffff8101c0000000 RIP: [<ffffffff880b22a1>] :aacraid:aac_internal_transfer+0xd6/0xe3 PGD 8063 PUD 0 Oops: 0000 [1] SMP last sysfs file: /block/sdb/removable CPU 2 Modules linked in: autofs4(U) hidp(U) nfs(U) lockd(U) fscache(U) nfs_acl(U) rfcomm(U) l2cap(U) bluetooth(U) sunrpc(U) ipv6(U) cpufreq_ondemand(U) dm_mirror(U) dm_mod(U) video(U) sbs(U) i2c_ec(U) button(U) battery(U) asus_acpi(U) acpi_memhotplug(U) ac(U) parport_pc(U) lp(U) parport(U) joydev(U) ide_cd(U) i2c_i801(U) i2c_core(U) shpchp(U) cdrom(U) bnx2(U) sg(U) pcspkr(U) ata_piix(U) libata(U) aacraid(U) sd_mod(U) scsi_mod(U) ext3(U) jbd(U) ehci_hcd(U) ohci_hcd(U) uhci_hcd(U) Pid: 2352, comm: syslogd Not tainted 2.6.18-prep #1 RIP: 0010:[<ffffffff880b22a1>] [<ffffffff880b22a1>] :aacraid:aac_internal_transfer+0xd6/0xe3 RSP: 0000:ffff8101bfd1fe68 EFLAGS: 00010083 RAX: 0000000000000063 RBX: 0000000000000008 RCX: 00000000ffd1fea0 RDX: ffffffff802da628 RSI: ffff8101c0000000 RDI: ffff8101b2a08168 RBP: ffff8101b2728010 R08: ffffffff802da628 R09: 0000000000000046 R10: 0000000000000000 R11: 0000000000000080 R12: 0000000000000010 R13: ffff8101bfd1fea8 R14: ffff8101bc74df58 R15: ffff8101bc74df58 FS: 00002aaaab0146f0(0000) GS:ffff8101bfcd2e40(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff8101c0000000 CR3: 00000001bdecd000 CR4: 00000000000006e0 Process syslogd (pid: 2352, threadinfo ffff8101bc74c000, task ffff8101bd979040) Stack: 0000000000000012 0000000000000036 0000000000000000 ffff8101bee9a800 ffff8101be9d3a00 ffff8101be9d3a00 ffff8101be8014f8 ffffffff880b26cc 40212227607e3141 2029282a26252423 0000000000000003 ffff810037e3a000 Call Trace: <IRQ [<ffffffff880b26cc>] :aacraid:get_container_name_callback+0x8b/0xb5 [<ffffffff880b6f67>] :aacraid:aac_intr_normal+0x1b3/0x1f9 [<ffffffff880b8007>] :aacraid:aac_rkt_intr+0x37/0x115 [<ffffffff80099749>] __rcu_process_callbacks+0xf8/0x1a8 [<ffffffff80010705>] handle_IRQ_event+0x29/0x58 [<ffffffff800b2fe0>] __do_IRQ+0xa4/0x105 [<ffffffff80011c19>] __do_softirq+0x5e/0xd5 [<ffffffff8006a193>] do_IRQ+0xe7/0xf5 [<ffffffff8005b649>] ret_from_intr+0x0/0xa On digging into it, it turned out that the customer was probing an aacraid device with an INQUIRY of 8 bytes. The way aacraid works, it was blindly trying to use aac_internal_transfer to copy the container name to byte 16 of the inquiry data, resulting in a negative transfer length. It then copies over the whole of kernel memory before dropping off the end. Fix updated and corrected by Mark Salyzyn Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16[SCSI] aacraid: Correct sa platform support. (Was: [Bug 8469] Bad EIP value ↵Salyzyn, Mark
on pentium3 SMP kernel-2.6.21.1) http://bugzilla.kernel.org/show_bug.cgi?id=8469 As discussed in the bugzilla outlined below, we have an sa based (Mustang) RAID adapter on the system, a Dell PERC2/QC. Affected controllers are HP NetRAID, Adaptec AAC-364, Dell PERC2/QC or Adaptec 5400S. This problem coincides with the introduction of the adapter_comm and adapter_deliver platform functions (Message [PATCH 1/4] aacraid: rework communication support code, January 23 2007, which initially migrated to 2.6.21) The panic occurs with an uninitialized adapter_deliver platform function pointer. The enclosed patch, unmodified as tested by Rainer, solves the problem. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16[SCSI] tgt: fix a rdma indirect transfer error bugFUJITA Tomonori
This sets sg_dma_len to a proper value. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16[SCSI] stex: minor cleanup and version updateEd Lin
Add debug information into abort and host_reset routine. Change ioremap to ioremap_nocache. Version updated to 3.6.0000.1. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16[SCSI] stex: fix reset recovery for console deviceEd Lin
After reset completed, the scsi error handler sends out TEST_UNIT_READY to the device. For 'normal' devices the command will be handled by firmware. However, because the RAID console only interfaces to scsi mid layer, the firmware will not process the command for it. This will make the console to be offlined right after reset. Add the handling in driver to fix this problem. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16[SCSI] stex: extend hard reset wait timeEd Lin
During hard bus reset of st_shasta controllers, 1 ms is not enough for 16-port controllers, although it's good for 8-port controllers. Extend the wait time to 100 ms to allow bus resets finish successfully. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16[SCSI] stex: fix id mapping issueEd Lin
The correct internal mapping of stex controllers should be: id:0~15, lun:0~7 (st_shasta) id:0, lun:0~127 (st_yosemite) id:0~127, lun:0 (st_vsc and st_vsc1) This patch reports the internal mapping to scsi mid layer, eliminating the translation between scsi mid layer and firmware. To achieve this goal, we also need to: -- fail the REPORT_LUNS command for st_shasta because the firmware is known to not report all actual luns -- add an entry in scsi_devindo.c to force sequential lun scan (for st_shasta controllers) -- fail the REPORT_LUNS command for console device -- remove special handling of REPORT_LUNS command for st_yosemite, as there is no translation mapping now Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-16[SCSI] ipr: Proper return codes for eh_dev_reset for SATA devicesBrian King
Currently ipr always returns success from eh_dev_reset when called for a SATA device. If ata_do_eh is unable to recover for some reason, this can result in commands that are still outstanding when ata_do_eh returns. Change ipr to verify no commands are outstanding before returning success. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-13[SCSI]: Add help text for SCSI_ESP_CORE.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-12Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) [ARM] Use new get_irqnr_preamble [ARM] Ensure machine class menu is sorted alphabetically [ARM] 4333/2: KS8695: Micrel Development board [ARM] 4332/2: KS8695: Serial driver [ARM] 4331/3: Support for Micrel/Kendin KS8695 processor [ARM] 4371/1: AT91: Support for Atmel AT91SAM9RL-EK development board [ARM] 4372/1: Define byte sizes in asm-arm/sizes.h [ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors. [ARM] Update mach-types [ARM] export symbol csum_partial_copy_from_user [ARM] iop13xx: msi support [ARM] stacktrace fix [ARM] Spinlock initializer cleanup [ARM] remove useless config option GENERIC_BUST_SPINLOCK [ARM] 4303/3: base kernel support for TI DaVinci [ARM] 4369/1: AT91: Fix circular dependency in header files [ARM] 4368/1: S3C24xx: build fix [ARM] 4364/1: AT91: LEDS on AT91SAM9261-EK [ARM] Fix iop32x/iop33x build [ARM] EBSA110: fix build errors caused by missing "const" ...
2007-05-11[ARM] ecard: add ecardm_iomap() / ecardm_iounmap()Russell King
Add devres ecardm_iomap() and ecardm_iounmap() for Acorn expansion cards. Convert all expansion card drivers to use them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11[ARM] ecard: add helper function for setting ecard irq opsRussell King
Rather than having every driver fiddle about setting its private IRQ operations and data, provide a helper function to contain this functionality in one place. Arrange to remove the driver-private IRQ operations and data when the device is removed from the driver, and remove the driver private code to do this. This fixes potential problems caused by drivers forgetting to remove these hooks. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11Convert SGI IP22 and specific drivers to platform_device.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-05-09Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix PIO setup on resume for ATAPI devices ide: legacy PCI bus order probing fixes ide: add ide_proc_register_port() ide: add "initializing" argument to ide_register_hw() ide: cable detection fixes (take 2) ide: move IDE settings handling to ide-proc.c ide: split off ioctl handling from IDE settings (v2) ide: make /proc/ide/ optional ide: add ide_tune_dma() helper ide: rework the code for selecting the best DMA transfer mode (v3) ide: fix UDMA/MWDMA/SWDMA masks (v3)
2007-05-10ide: move IDE settings handling to ide-proc.cBartlomiej Zolnierkiewicz
* move __ide_add_setting() ide_add_setting() __ide_remove_setting() auto_remove_settings() ide_find_setting_by_name() ide_read_setting() ide_write_setting() set_xfer_rate() ide_add_generic_settings() ide_register_subdriver() ide_unregister_subdriver() from ide.c to ide-proc.c * set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it * rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(), update device drivers to use new names * add CONFIG_IDE_PROC_FS=n versions of ide_proc_[un]register_driver() and ide_add_generic_settings() * make ide_find_setting_by_name(), ide_{read,write}_setting() and ide_{add,remove}_proc_entries() static * cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef, also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc * remove bogus comment from ide.h * cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t Besides saner code this patch results in the IDE core smaller by ~2 kB (on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS=n. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: split off ioctl handling from IDE settings (v2)Bartlomiej Zolnierkiewicz
* do write permission and min/max checks in ide_procset_t functions * ide-disk.c: drive->id is always available so cleanup "multcount" setting accordingly * ide-disk.c: "address" setting was incorrectly defined as type TYPE_INTA, fix it by using type TYPE_BYTE and updating ide_drive_t->adressing field, the bug didn't trigger because this IDE setting uses custom ->set function * ide.c: add set_ksettings() for handling HDIO_SET_KEEPSETTINGS ioctl * ide.c: add set_unmaskirq() for handling HDIO_SET_UNMASKINTR ioctl * handle ioctls directly in generic_ide_ioclt() and idedisk_ioctl() instead of using IDE settings to deal with them * remove no longer needed ide_find_setting_by_ioctl() and {read,write}_ioctl fields from ide_settings_t, also remove now unused TYPE_INTA handling v2: * add missing EXPORT_SYMBOL_GPL(ide_setting_sem) needed now for ide-disk Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: make /proc/ide/ optionalBartlomiej Zolnierkiewicz
All important information/features should be already available through sysfs and ioctl interfaces. Add CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option, disabling it makes IDE driver ~5 kB smaller (on x86-32). While at it add CONFIG_PROC_FS=n versions of proc_ide_{create,destroy}() and remove no longer needed #ifdefs. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-09Fix occurrences of "the the "Michael Opdenacker
Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-08Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Optimize fault kprobe handling just like powerpc. [SPARC]: Wire up utimensat syscall. [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code. [SPARC64]: Kill asm-sparc64/pbm.h [ATYFB]: Fix sparc includes. [QLA2XXX]: Fix build on sparc. [SPARC64]: Removal of trivial pci_controller_info uses. [SPARC64]: Move index info pci_pbm_info. [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info. [SPARC64]: Move pci_ops into pci_pbm_info. [SPARC64] SBUS: Error interrupt registry cleanups. [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's [SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX. [SPARC64] PCI: Use common routine to fetch PBM properties.
2007-05-08Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (58 commits) [SCSI] zfcp: clear boxed flag on unit reopen. [SCSI] zfcp: clear adapter failed flag if an fsf request times out. [SCSI] zfcp: rework request ID management. [SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI [SCSI] zfcp: Locking for req_no and req_seq_no [SCSI] zfcp: print S_ID and D_ID with 3 bytes [SCSI] ipr: Use PCI-E reset API for new ipr adapter [SCSI] qla2xxx: Update version number to 8.01.07-k7. [SCSI] qla2xxx: Add MSI support. [SCSI] qla2xxx: Correct pci_set_msi() usage semantics. [SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed. [SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings. [SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization. [SCSI] zfcp: Stop system after memory corruption [SCSI] mesh: cleanup variable usage in interrupt handler [SCSI] megaraid: replace yield() with cond_resched() [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n [SCSI] aacraid: correct SUN products to README [SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers [SCSI] aacraid: kexec fix (reset interrupt handler) ...
2007-05-08[QLA2XXX]: Fix build on sparc.David S. Miller
We now use pci_device_to_OF_node() to get properties and of_get_property() returns const pointers. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits) [POWERPC] Abolish powerpc_flash_init() [POWERPC] Early serial debug support for PPC44x [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc [POWERPC] Add device tree for Ebony [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now [POWERPC] MPIC U3/U4 MSI backend [POWERPC] MPIC MSI allocator [POWERPC] Enable MSI mappings for MPIC [POWERPC] Tell Phyp we support MSI [POWERPC] RTAS MSI implementation [POWERPC] PowerPC MSI infrastructure [POWERPC] Rip out the existing powerpc msi stubs [POWERPC] Remove use of 4level-fixup.h for ppc32 [POWERPC] Add powerpc PCI-E reset API implementation [POWERPC] Holly bootwrapper [POWERPC] Holly DTS [POWERPC] Holly defconfig [POWERPC] Add support for 750CL Holly board [POWERPC] Generalize tsi108 PCI setup [POWERPC] Generalize tsi108 PHY types ... Fixed conflict in include/asm-powerpc/kdebug.h manually Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Replace deprecated SA_xxx interrupt flagsThomas Gleixner
Fix the last users of the deprecated SA_xxx interrupt flags. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08[SCSI] ipr: Use PCI-E reset API for new ipr adapterBrian King
Use a newly added PCI API to issue a PCI Fundamental reset (warm reset) to a new ipr PCI-E adapter. Typically, the ipr adapter uses the start BIST bit in config space to reset an adapter. Issuing start BIST on this particular adapter results in the PCI-E logic on the card losing sync, which causes PCI-E errors, making the card unusable. The only reset mechanism that exists on this hardware that does not have this problem is PCI Fundamental reset (warm reset). Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Update version number to 8.01.07-k7.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Add MSI support.Andrew Vasquez
Supported ISP types include ISP2422 and revision-2 type ISP2432 chips. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Correct pci_set_msi() usage semantics.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Attempt to stop firmware only if it had been previously ↵Andrew Vasquez
executed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings.Andrew Vasquez
Hardcoding the qlport_down_retry module-parameter effectively disallowed any user-defined NVRAM setting to go into effect. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA ↵Andrew Vasquez
initialization. Remove a stale check against ha->device_flags (DFLG_NO_CABLE) as topology scanning is performed within the DPC-thread context. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>