aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2005-09-09[PATCH] trivial iomem annotations in qla2xxx/qla_dbg.cviro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] more SPIN_LOCK_UNLOCKED -> DEFINE_SPINLOCK conversionsIngo Molnar
This converts the final 20 DEFINE_SPINLOCK holdouts. (another 580 places are already using DEFINE_SPINLOCK). Build tested on x86. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] timer initialization cleanup: DEFINE_TIMERIngo Molnar
Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[libata] minor fixesJeff Garzik
* sata_mv: remove pci_intx(), now that the same function is in PCI core * sata_sis: fix variable initialization bug, trim trailing whitespace
2005-09-08[PATCH] PCI/libata INTx cleanupBrett M Russ
Simple cleanup to eliminate X copies of the pci_enable_intx() function in libata. Moved ahci.c's pci_intx() to pci.c and use it throughout libata and msi.c. Signed-off-by: Brett Russ <russb@emc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] scan all enabled ports on ata_piixHannes Reinecke
ICH6 spec defines the PORT_ bits as: PORT_ENABLED (R/W): 0 = Disabled. The port is in the off state and cannot detect any devices. 1 = Enabled. The port can transition between the on, partial, and slumber states and can detect devices. PORT_PRESENT (R/O) The status of this bit may change at any time. This bit is cleared when the port is disabled via PORT_ENABLED. This bit is not cleared upon surprise removal of a device. So from a textual view it is not necessary that PORT_PRESENT _must_ be set, especially if a device detection has to be done anyway. And, in fact, this is the view that ACER has been taken with its new Laptops (e.g. Travelmate 4150). And the definition of PORT_ENABLED / PORT_PRESENT is mixed up, btw. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-08Merge /spare/repo/linux-2.6/ Jeff Garzik
2005-09-07[PATCH] sata_sis: Add support for SiS182 chipsetArnaud Patard
This patch adds support for the SiS182 sata chipset. This is a minimalistic version of the patch from http://bugme.osdl.org/show_bug.cgi?id=4192. Basically, it add the PCI IDs and handles the change of the 2nd port adress register. Signed-Off-By: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-07Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 Linus Torvalds
2005-09-07Merge branch 'upstream' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6
2005-09-07Merge branch 'upstream' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-09-07[PATCH] bogus #if (ncr53c406)viro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] -Wundef fixes (ncr5380)viro@ZenIV.linux.org.uk
NDEBUG and NDEBUG_ABORT are almost always used as integers in NCR5380; added define to 0 if they are not defined, switched lone ifdef NDEBUG into if. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] drivers: convert kcalloc to kzallocPekka Enberg
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[libata sata_mv] fix buildJeff Garzik
This function will go away when pci_intx() finally makes it into the core PCI layer.
2005-09-07[PATCH] libata: Marvell SATA support (PIO mode)Brett Russ
This is my libata compatible low level driver for the Marvell SATA family. Currently it successfully runs in PIO mode on a 6081 chip. EDMA support is in the works and should be done shortly. Review, testing (especially on other flavors of Marvell), comments welcome. Signed-off-by: Brett Russ <russb@emc.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-07[PATCH] libata: fix pio_mask values (take 2)Brett Russ
ata_get_mode_mask() uses bits 3 and 4 in the pio_mask to represent PIO modes 3 and 4. The value read from the drive, which reports support for PIO3 and PIO4 in bits 0 and 1, is shifted left by 3 bits and OR'd with 0x7 (which then corresponds to PIO 2-0 in libata). Thus, the drivers below need adjustments to comply with the way pio_mask is used. I changed the masks from the commented values to all support PIO4-0, since the spec mandates that PIO0-2 are supported and there's no reason not to support PIO3 IMO. Signed-off-by: Brett Russ <russb@emc.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-07[kernel-doc] fix various DocBook build problems/warningsJeff Garzik
Most serious is fixing include/sound/pcm.h, which breaks the DocBook build. The other stuff is just filling in things that cause warnings.
2005-09-06Merge by hand (conflicts in sd.c)James Bottomley
2005-09-06[SCSI] quieten messages on scsi_execute commandsJames Bottomley
scsi_io_completion() can be a bit noisy about certain conditions. Previously this wasn't a problem for internally generated commands, since they never hit it. However, since we do all SCSI commands via bios, now they do. user CD testers like magicdev are now getting not ready messages every time they touch the CD to see if there's anything in it. Fix this by making all scsi_execute commands REQ_QUIET and making scsi_finish_io() not say anything for REQ_QUIET. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] unexport scsi_add_timer/scsi_delete_timerChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] switch EH thread startup to the kthread APIChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] fix SCSI_IOCTL_PROBE_HOSTChristoph Hellwig
This returns always false with new-style drivers right now. Make it return always true instead, as a host must be present if we are able to call the ioctl (without a host attached there would be no device node to call on..) Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] Universal Xport no attach blacklistAnton Blanchard
On Fri, Dec 13, 2002 at 12:24:39AM +1100, Anton Blanchard wrote: > We tested 2.5.51 on a ppc64 box, qlogic 2312 and a fastt700 array. I > had CONFIG_SCSI_REPORT_LUNS and unfortunately it thought the management > LUN was a disk: > > Vendor: IBM Model: Universal Xport Rev: 0520 > Type: Direct-Access ANSI SCSI revision: 03 > > ... > > SCSI device sdaj: drive cache: write through > SCSI device sdaj: 40960 512-byte hdwr sectors (21 MB) > sdaj: unknown partition table > Attached scsi disk sdaj at scsi2, channel 0, id 0, lun 31 > > ... > > end_request: I/O error, dev sdaj, sector 0 Three years later... It looks like SGI use the same FC vendor and they already have a workaround for this issue. The following patch adds the IBM version of it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] sd: pause in sd_spinup_disk for slow USB devicesAlan Stern
This patch adds a delay tailored for USB flash devices that are slow to initialize their firmware. The symptom is a repeated Unit Attention with ASC=0x28 (Not Ready to Ready transition). The patch will wait for up to 5 seconds for such devices to become ready. Normal devices won't send the repeated Unit Attention sense key and hence won't trigger the patch. This fixes a problem with James Roberts-Thomson's USB device, and I've seen several reports of other devices exhibiting the same symptoms -- presumably they will be helped as well. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] return success after retries in scsi_eh_turAlan Stern
The problem lies in the way the error handler uses TEST UNIT READY to tell whether error recovery has succeeded. The scsi_eh_tur function gives up after one round of retrying; after that it decides that more error recovery is needed. However TUR is liable to report sense data indicating a retry is needed when in fact error recovery has succeeded. A typical example might be SK=2, ASC=4, ASCQ=1 (Logical unit in process of becoming ready). The mere fact that we were able to get a sensible reply to the TUR should indicate that the device is working well enough to stop error recovery. I ran across a case back in January where this happened. A CD-ROM drive timed out the INQUIRY command, and a device reset fixed the blockage. But then the drive kept responding with 2/4/1 -- because it was spinning up I suppose -- until the error handler gave up and placed it offline. If the initial INQUIRY had received the 2/4/1 instead, everything would have worked okay. It doesn't seem reasonable for things to fail just because the error handler had started running. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] ibmvscsi: handle large scatter/gather listsJames Bottomley
The maximum size of a scatter-gather list that the current IBM VSCSI Client can handle is 10. This patch adds large scatter-gather support to the client so that it is capable of handling up to SG_ALL(255) number of requests in the scatter-gather list. Signed-off-by: Linda Xie <lxie@us.ibm.com> Acked by: Dave C Boutcher <sleddog@us.ibm.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-05Merge branch 'upstream' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-09-05/spare/repo/libata-dev branch 'iomap-try3'Jeff Garzik
2005-09-05[PATCH] swsusp: switch pm_message_t to structPavel Machek
This adds type-checking to pm_message_t, so that people can't confuse it with int or u32. It also allows us to fix "disk yoyo" during suspend (disk spinning down/up/down). [We've tried that before; since that cpufreq problems were fixed and I've tried make allyes config and fixed resulting damage.] Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] mips: clean up 32/64-bit configurationRalf Baechle
Start cleaning 32-bit vs. 64-bit configuration. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04[SCSI] qla2xxx: Update version number to 8.01.00-k.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Stop firmware execution at unintialization time.Andrew Vasquez
On ISP24xx parts, stop execution of firmware during ISP tear-down. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Replace schedule_timeout().Andrew Vasquez
From: Nishanth Aravamudan <nacc@us.ibm.com> Replace schedule_timeout() with msleep()/msleep_interruptible() as appropriate, to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Remove bad call to fc_remove_host() during probe failure.Andrew Vasquez
fc_remove_host() should only be called after a scsi_host has been successfully added via scsi_add_host() -- any failures while qla2xxx probing would result in an incorrect call to fc_remove_host() during cleanup. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Add host attributes.Andrew Vasquez
Export additional host information via the shost_attrs member in the scsi_host template. Attributes include: driver version, firmware version, ISP serial number, ISP type, ISP product ID, HBA model name, HBA model description, PCI interconnect information, and HBA port state. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Add change_queue_depth/type() API support.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Remove redundant call to pci_unmap_sg().Andrew Vasquez
In a corner-case failure where the request-q does not contain enough entries for a given request, pci_unmap_sg() would be called twice. Remove direct call and let the failure-path logic handle the unmapping. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Remove RISC pause/release barriers during flash manipulation.Andrew Vasquez
Remove unnecessary RISC pause/release barriers during ISP24xx flash manipulation. The ISP24xx can arbitrate flash access requests during RISC executions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Correct LED scheme definition.Andrew Vasquez
Original implementation used an overloaded bit in the EFI parameters. The correct bit is BIT_4 of the special_options section of NVRAM. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Simplify redundant target/device reset logic.Andrew Vasquez
Remove redundant qla2x00_target_reset() function in favour of the equivalent qla2x00_device_reset(). Update callers of old function. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Correct domain/area exclusion logic.Andrew Vasquez
In an FL topology, limit port recognition to those devices not within the same area and domain of the ISP. The firmware will recogonize such devices during local-loop discovery. Some devices may respond to a PLOGI before they have completed their fabric login or they may not be a public device. In this case they will report: domain == 00 area == 00 alpa == <XX> which is valid. Exclude such devices from local loop discovery. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Add FDMI support.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Export class-of-service (COS) information.Andrew Vasquez
Export COS information for the fc_host and fc_remote_port objects added by the driver. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] qla2xxx: Use dma_get_required_mask() in determining the 'ideal' DMA mask.Andrew Vasquez
In order to efficiently utilise the ISP's IOCB request-queue, use the dma_get_required_mask() function to determine the use of command-type 2 or 3 IOCBs when queueing SCSI commands. This applies to ISP2[123]xx chips only, as the ISP24xx uses command-type 7 IOCBs which use 64bit DSDs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] aic7xxx: remove aiclib.cChristoph Hellwig
#include of C files and macro tricks to rename symbols are evil and just cause trouble. Let's doublicate the two functions as they're going to go away soon enough anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] aacraid: bad BUG_ON fixMark Haverkamp
This was noticed by Doug Bazamic and the fix found by Mark Salyzyn at Adaptec. There was an error in the BUG_ON() statement that validated the calculated fib size which can cause the driver to panic. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04[SCSI] sg direct io/mmap oops, st syncDouglas Gilbert
This patch adopts the same solution as proposed by Kai M. in a post titled: "[PATCH] SCSI tape signed/unsigned fix". The fix is in a function that the sg driver borrowed from the st driver so its maintenance is a little easier if the functions remain the same after the fix. - change nr_pages type from unsigned to signed so errors from get_user_pages() call are properly handled Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04This patch fixes in st.c the bug in the signed/unsigned int comparisonJames Bottomley
reported by Doug Gilbert and fixed by him in sg.c (see [PATCH] sg direct io/mmap oops). Doug fixed the comparison in sg.c. This fix for st.c does not touch the comparison but makes both arguments signed to remove the problem. The new code is adapted from linux/fs/bio.c. Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-30[SCSI] embryonic RAID classJames Bottomley
The idea behind a RAID class is to provide a uniform interface to all RAID subsystems (both hardware and software) in the kernel. To do that, I've made this class a transport class that's entirely subsystem independent (although the matching routines have to match per subsystem, as you'll see looking at the code). I put it in the scsi subdirectory purely because I needed somewhere to play with it, but it's not a scsi specific module. I used a fusion raid card as the test bed for this; with that kind of card, this is the type of class output you get: jejb@titanic> ls -l /sys/class/raid_devices/20\:0\:0\:0/ total 0 lrwxrwxrwx 1 root root 0 Aug 16 17:21 component-0 -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:1:0/20:1:0:0/ lrwxrwxrwx 1 root root 0 Aug 16 17:21 component-1 -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:1:1/20:1:1:0/ lrwxrwxrwx 1 root root 0 Aug 16 17:21 device -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:0:0/20:0:0:0/ -r--r--r-- 1 root root 16384 Aug 16 17:21 level -r--r--r-- 1 root root 16384 Aug 16 17:21 resync -r--r--r-- 1 root root 16384 Aug 16 17:21 state So it's really simple: for a SCSI device representing a hardware raid, it shows the raid level, the array state, the resync % complete (if the state is resyncing) and the underlying components of the RAID (these are exposed in fusion on the virtual channel 1). As you can see, this type of information can be exported by almost anything, including software raid. The more difficult trick, of course, is going to be getting it to perform configuration type actions with writable attributes. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>