aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2009-09-23seq_file: constify seq_operationsJames Morris
Make all seq_operations structs const, to help mitigate against revectoring user-triggerable function pointers. This is derived from the grsecurity patch, although generated from scratch because it's simpler than extracting the changes from there. Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) trivial: fix typo in aic7xxx comment trivial: fix comment typo in drivers/ata/pata_hpt37x.c trivial: typo in kernel-parameters.txt trivial: fix typo in tracing documentation trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c trivial: remove unnecessary semicolons trivial: Fix duplicated word "options" in comment trivial: kbuild: remove extraneous blank line after declaration of usage() trivial: improve help text for mm debug config options trivial: doc: hpfall: accept disk device to unload as argument trivial: doc: hpfall: reduce risk that hpfall can do harm trivial: SubmittingPatches: Fix reference to renumbered step trivial: fix typos "man[ae]g?ment" -> "management" trivial: media/video/cx88: add __init/__exit macros to cx88 drivers trivial: fix typo in CONFIG_DEBUG_FS in gcov doc trivial: fix missing printk space in amd_k7_smp_check trivial: fix typo s/ketymap/keymap/ in comment trivial: fix typo "to to" in multiple files trivial: fix typos in comments s/DGBU/DBGU/ ...
2009-09-22const: make block_device_operations constAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21trivial: fix typo in aic7xxx commentUwe Kleine-Koenig
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21trivial: remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21trivial: fix typo "to to" in multiple filesAnand Gadiyar
Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-20includecheck fix: drivers/scsi, ibmvscsi.cJaswinder Singh Rajput
fix the following 'make includecheck' warning: drivers/scsi/ibmvscsi/ibmvscsi.c: asm/firmware.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247067016.4382.78.camel@ht.satnam> Acked-by: Brian King <brking@linux.vnet.ibm.com>
2009-09-20includecheck fix: drivers/scsi, libfcoe.cJaswinder Singh Rajput
fix the following 'make includecheck' warning: drivers/scsi/fcoe/libfcoe.c: linux/netdevice.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247066936.4382.76.camel@ht.satnam>
2009-09-15driver model: constify attribute groupsDavid Brownell
Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-14Merge branch 'for-2.6.32' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.32' of git://git.kernel.dk/linux-2.6-block: (29 commits) block: use blkdev_issue_discard in blk_ioctl_discard Make DISCARD_BARRIER and DISCARD_NOBARRIER writes instead of reads block: don't assume device has a request list backing in nr_requests store block: Optimal I/O limit wrapper cfq: choose a new next_req when a request is dispatched Seperate read and write statistics of in_flight requests aoe: end barrier bios with EOPNOTSUPP block: trace bio queueing trial only when it occurs block: enable rq CPU completion affinity by default cfq: fix the log message after dispatched a request block: use printk_once cciss: memory leak in cciss_init_one() splice: update mtime and atime on files block: make blk_iopoll_prep_sched() follow normal 0/1 return convention cfq-iosched: get rid of must_alloc flag block: use interrupts disabled version of raise_softirq_irqoff() block: fix comment in blk-iopoll.c block: adjust default budget for blk-iopoll block: fix long lines in block/blk-iopoll.c block: add blk-iopoll, a NAPI like approach for block devices ...
2009-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (209 commits) [SCSI] fix oops during scsi scanning [SCSI] libsrp: fix memory leak in srp_ring_free() [SCSI] libiscsi, bnx2i: make bound ep check common [SCSI] libiscsi: add completion function for drivers that do not need pdu processing [SCSI] scsi_dh_rdac: changes for rdac debug logging [SCSI] scsi_dh_rdac: changes to collect the rdac debug information during the initialization [SCSI] scsi_dh_rdac: move the init code from rdac_activate to rdac_bus_attach [SCSI] sg: fix oops in the error path in sg_build_indirect() [SCSI] mptsas : Bump version to 3.04.12 [SCSI] mptsas : FW event thread and scsi mid layer deadlock in SYNCHRONIZE CACHE command [SCSI] mptsas : Send DID_NO_CONNECT for pending IOs of removed device [SCSI] mptsas : PAE Kernel more than 4 GB kernel panic [SCSI] mptsas : NULL pointer on big endian systems causing Expander not to tear off [SCSI] mptsas : Sanity check for phyinfo is added [SCSI] scsi_dh_rdac: Add support for Sun StorageTek ST2500, ST2510 and ST2530 [SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller [SCSI] qla2xxx: Update version number to 8.03.01-k6. [SCSI] qla2xxx: Properly delete rports attached to a vport. [SCSI] qla2xxx: Correct various NPIV issues. [SCSI] qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly. ...
2009-09-12[SCSI] fix oops during scsi scanningJames Bottomley
Chris Webb reported: p0# uname -a Linux f7ea8425-d45b-490f-a738-d181d0df6963.host.elastichosts.com 2.6.30.4-elastic-lon-p #2 SMP PREEMPT Thu Aug 20 14:30:50 BST 2009 x86_64 Intel(R) Xeon(R) CPU E5420 @ 2.50GHz GenuineIntel GNU/Linux p0# zgrep SCAN_ASYNC /proc/config.gz # CONFIG_SCSI_SCAN_ASYNC is not set p0# cat /var/log/kern/2009-08-20 [...] 15:27:10.485 kernel: scsi9 : iSCSI Initiator over TCP/IP 15:27:11.493 kernel: scsi 9:0:0:0: RAID IET Controller 0001 PQ: 0 ANSI: 5 15:27:11.493 kernel: scsi 9:0:0:0: Attached scsi generic sg6 type 12 15:27:11.495 kernel: scsi 9:0:0:1: Direct-Access IET VIRTUAL-DISK 0001 PQ: 0 ANSI: 5 15:27:11.495 kernel: sd 9:0:0:1: Attached scsi generic sg7 type 0 15:27:11.495 kernel: sd 9:0:0:1: [sdg] 4194304 512-byte hardware sectors: (2.14 GB/2.00 GiB) 15:27:11.495 kernel: sd 9:0:0:1: [sdg] Write Protect is off 15:27:11.495 kernel: sd 9:0:0:1: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA 15:27:13.012 kernel: sdg:<6>scsi 9:0:0:1: [sdg] Unhandled error code 15:27:13.012 kernel: scsi 9:0:0:1: [sdg] Result: hostbyte=0x07 driverbyte=0x00 15:27:13.012 kernel: end_request: I/O error, dev sdg, sector 0 15:27:13.012 kernel: Buffer I/O error on device sdg, logical block 0 15:27:13.012 kernel: ldm_validate_partition_table(): Disk read failed. 15:27:13.012 kernel: unable to read partition table 15:27:13.014 kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 15:27:13.014 kernel: IP: [<ffffffff803f0d77>] disk_part_iter_next+0x74/0xfd 15:27:13.014 kernel: PGD 82ad0b067 PUD 82cd7e067 PMD 0 15:27:13.014 kernel: Oops: 0000 [#1] PREEMPT SMP 15:27:13.014 kernel: last sysfs file: /sys/devices/platform/host9/session4/iscsi_session/session4/ifacename 15:27:13.014 kernel: CPU 5 15:27:13.014 kernel: Modules linked in: 15:27:13.014 kernel: Pid: 13999, comm: async/0 Not tainted 2.6.30.4-elastic-lon-p #2 X7DBN 15:27:13.014 kernel: RIP: 0010:[<ffffffff803f0d77>] [<ffffffff803f0d77>] disk_part_iter_next+0x74/0xfd 15:27:13.014 kernel: RSP: 0018:ffff88066afa3dd0 EFLAGS: 00010246 15:27:13.014 kernel: RAX: ffff88082b58a000 RBX: ffff88066afa3e00 RCX: 0000000000000000 15:27:13.014 kernel: RDX: 0000000000000000 RSI: ffff88082b58a000 RDI: 0000000000000000 15:27:13.014 kernel: RBP: ffff88066afa3df0 R08: ffff88066afa2000 R09: ffff8806a204f000 15:27:13.014 kernel: R10: 000000fb12c7d274 R11: ffff8806c2bf0628 R12: ffff88066afa3e00 15:27:13.014 kernel: R13: ffff88082c829a00 R14: 0000000000000000 R15: ffff8806bc50c920 15:27:13.014 kernel: FS: 0000000000000000(0000) GS:ffff88002818a000(0000) knlGS:0000000000000000 15:27:13.014 kernel: CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b 15:27:13.014 kernel: CR2: 0000000000000010 CR3: 000000082ade3000 CR4: 00000000000426e0 15:27:13.014 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 15:27:13.014 kernel: DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 15:27:13.014 kernel: Process async/0 (pid: 13999, threadinfo ffff88066afa2000, task ffff8806c2bf05e0) 15:27:13.014 kernel: Stack: 15:27:13.014 kernel: 0000000000000000 ffff88066afa3e00 ffff88066afa3e00 ffff88082c829a00 15:27:13.014 kernel: ffff88066afa3e40 ffffffff80306feb ffff88082b58a000 0000000000000000 15:27:13.014 kernel: 0000000000000001 ffff8806bc50c920 ffff88066afa3e40 ffff88082b58a000 15:27:13.014 kernel: Call Trace: 15:27:13.014 kernel: [<ffffffff80306feb>] register_disk+0x122/0x13a 15:27:13.014 kernel: [<ffffffff803f0b0f>] add_disk+0xaa/0x106 15:27:13.014 kernel: [<ffffffff80493609>] sd_probe_async+0x198/0x25b 15:27:13.014 kernel: [<ffffffff80270482>] async_thread+0x10c/0x20d 15:27:13.014 kernel: [<ffffffff802545ff>] ? default_wake_function+0x0/0xf 15:27:13.014 kernel: [<ffffffff80270376>] ? async_thread+0x0/0x20d 15:27:13.014 kernel: [<ffffffff8026ad89>] kthread+0x55/0x80 15:27:13.014 kernel: [<ffffffff8022be6a>] child_rip+0xa/0x20 15:27:13.014 kernel: [<ffffffff8026ad34>] ? kthread+0x0/0x80 15:27:13.014 kernel: [<ffffffff8022be60>] ? child_rip+0x0/0x20 15:27:13.014 kernel: Code: c8 ff 80 e1 0c b9 00 00 00 00 0f 44 c1 41 83 cd ff 48 8d 7a 20 48 be ff ff ff ff 08 00 00 00 48 b9 00 00 00 00 08 00 00 00 eb 50 <8b> 42 10 41 bd 01 00 00 00 eb db 4c 63 c2 4e 8d 04 c7 4d 8b 20 15:27:13.015 kernel: RIP [<ffffffff803f0d77>] disk_part_iter_next+0x74/0xfd 15:27:13.015 kernel: RSP <ffff88066afa3dd0> 15:27:13.015 kernel: CR2: 0000000000000010 15:27:13.015 kernel: ---[ end trace 6104b56ef5590e25 ]--- The problem is caused because the async scanning split in sd.c doesn't hold any reference to the device when it kicks off the async piece. What's happening is that an iSCSI disconnect is destorying the device again *before* the async sd scanning thread even starts. Fix this by taking a reference before starting the thread and dropping it again when the thread completes. Reported-by: Chris Webb <chris@arachsys.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] libsrp: fix memory leak in srp_ring_free()Bart Van Assche
This patch fixes a memory leak in the libsrp function srp_ring_free(). It is not documented whether or not this function should free the ring pointer itself. But the source code of the callers of this function (srp_target_alloc() and srp_target_free()) makes it clear that srp_ring_free() should deallocate the ring pointer itself. Furthermore, the patch below makes srp_ring_free() deallocate all memory allocated by srp_ring_alloc(). This patch affects the ibmvstgt driver, which is the only in-tree driver that calls the srp_ring_free() function (indirectly). Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] libiscsi, bnx2i: make bound ep check commonMike Christie
bnx2i currently has a check for if a ep is properly bound, so if iscsi_queuecommand/xmit_task is called while there is no ep we will not queue IO. be2iscsi sends IO from queuecommand/xmit_task like how bnx2i does and needs a similar test. This patch has us just use the suspend_bit test for this. When ep_poll has succeeed iscsid will call conn_bind, the LLD will then call iscsi_conn_bind which will clear the suspend bit. When ep_disconnect is called (or if there is a conn error) we set the suspend bit. For the ep_disconnect case I am adding a helper in this patch that will take the session lock to make sure iscsi_queuecommand/xmit_task is not running and it will set the suspend bit. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] libiscsi: add completion function for drivers that do not need pdu ↵Mike Christie
processing beiscsi does not need the iscsi scsi cmd processing. It does not even get this info on the completion path. This adds a function to just update the sequencing numbers and complete a task. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] scsi_dh_rdac: changes for rdac debug loggingMoger, Babu
Patch to add debugging stuff for rdac device handler. - Added a bit mask "module parameter" rdac_logging with 2 bits for each type of logging. - currently defined only two types of logging(failover and sense logging). Can be enhanced later if required. - By default only failover logging is enabled which is equivalent of current logging. Signed-off-by: Babu Moger <babu.moger@lsi.com> Reviewed-by: Vijay Chauhan <vijay.chauhan@lsi.com> Reviewed-by: Bob Stankey <Robert.stankey@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] scsi_dh_rdac: changes to collect the rdac debug information during ↵Moger, Babu
the initialization Adding the code to read the debug information during initialization. This patch collects the information about storage and controllers during rdac_activate. Signed-off-by: Babu Moger <babu.moger@lsi.com> Reviewed-by: Vijay Chauhan <vijay.chauhan@lsi.com> Reviewed-by: Bob Stankey <Robert.stankey@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] scsi_dh_rdac: move the init code from rdac_activate to rdac_bus_attachMoger, Babu
Moving the initialization code from rdac_activate to rdac_bus_attach which is more efficient. We don't have to collect all the information during every activate. Signed-off-by: Babu Moger <babu.moger@lsi.com> Reviewed-by: Vijay Chauhan <vijay.chauhan@lsi.com> Reviewed-by: Bob Stankey <Robert.stankey@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] sg: fix oops in the error path in sg_build_indirect()Michal Schmidt
When the allocation fails in sg_build_indirect(), an oops happens in the error path. It's caused by an obvious typo. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reported-by: Bob Tracy <rct@gherkin.frus.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] scsi_dh_rdac: Add support for Sun StorageTek ST2500, ST2510 and ST2530Charlie Brady
These storage arrays can use RDAC when configured with 'linux' as the initiator. http://www.sun.com/storage/disk_systems/workgroup/2500/ http://www.sun.com/storage/disk_systems/workgroup/2510/ http://www.sun.com/storage/disk_systems/workgroup/2530/ Signed-off-by: Charlie Brady <charlieb@budge.apana.org.au> Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controllerAnil Ravindranath
Signed-off-by: Anil Ravindranath <anil_ravindranath@pmc-sierra.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Update version number to 8.03.01-k6.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Properly delete rports attached to a vport.Andrew Vasquez
Original code would inadvertently skip the deferred fc_remote_port_delete() call for rports hanging off any vport. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Correct various NPIV issues.Andrew Vasquez
* Consolidate vport-count processing. * Correct vp_idx restrictions during RSCN processing. * Push topology verification check to qla2x00_do_dpc_all_vps(). * Don't skip vport full-login-lip/lip-reset mailbox handling. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly.Lalit Chandivade
Original code would break-out of loop after only one iteration. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Further limit device-table (qla_devtbl) lookup to non-24xx.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] qla2xxx: Correctly set FCF_TAPE_PRESENT flag based on scsi-device.Santosh Vernekar
In fabric-login based on iop BIT_8 firmware notifies presence of a FCP2 device and not necessarily a TAPE device. So instead of setting FCF_TAPE_PRESENT flag there we set it using scsi_device->type after mid-layer scan recognises "type" of the device. It also adds a new flag FCF_FCP2_DEVICE for any future use. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-11scsi,block: update SCSI to handle mixed merge failuresTejun Heo
Update scsi_io_completion() such that it only fails requests till the next error boundary and retry the leftover. This enables block layer to merge requests with different failfast settings and still behave correctly on errors. Allow merge of requests of different failfast settings. As SCSI is currently the only subsystem which follows failfast status, there's no need to worry about other block drivers for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Niel Lambrechts <niel.lambrechts@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-10[SCSI] fcoe: flush per-cpu thread work when destroying interfaceJoe Eykholt
This fixes one cause of an occational problem when unloading libfc where the exchange manager pool doesn't have all items freed. The existing WARN_ON(mp->total_exches <= 0) isn't hit. However, note that total_exches is decremented when the exchange is completed, and it can be held with a refcnt for a while after that. I'm not sure what the offending exchange is, but I suspect it is an incoming request, because outgoing state machines should be all stopped at this point. Note that although receive is stopped before the exchange manager is freed, there could still be active threads handling received frames. This patch flushes the queues by allocating a new skb and sending it through, and have the thread handle this new skb specially. This is similar to the way the work queues are flushed now by putting work items in them and waiting until they make it through the queue. An skb->destructor function is used to inform us of the completion of the flush, and the fr_dev() is left NULL to indicate to fcoe_percpu_receive_thread() that the skb should be just freed. There's already a check for the lp being NULL which prints a message. We skip printing the message if the destructor is for flushing. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: don't swap OX_ID and RX_ID when sending BA_RJTJoe Eykholt
I saw an lport debug message from the exchange manager saying: "lport 70500: Received response for out of range oxid:ffff" A trace showed this was a BA_RJT sent due to an incoming ABTS which arrived on an unknown exchange. So, the sender of the BA_RJT was in error, but in this case, both the initiator and responder were the same machine. The OX_ID and RX_ID should not have been reversed in this case. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: send GPN_ID in reaction to single-port RSCNs.Joe Eykholt
When an RSCN indicates changes to individual remote ports, don't blindly log them out and then back in. Instead, determine whether they're still in the directory, by doing GPN_ID. If that is successful, call login, which will send ADISC and reverify, otherwise, call logoff. Perhaps we should just delete the rport, not send LOGO, but it seems safer. Also, fix a possible issue where if a mix of records in the RSCN cause us to queue disc_ports for disc_single and then we decide to do full rediscovery, we leak memory for those disc_ports queued. So, go through the list of disc_ports even if doing full discovery. Free the disc_ports in any case. If any of the disc_single() calls return error, do a full discovery. The ability to fill in GPN_ID requests was added to fc_ct_fill(). For this, it needs the FC_ID to be passed in as an arg. The did parameter for fc_elsct_send() is used for that, since the actual D_DID will always be 0xfffffc for all CT requests so far. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: fix handling of incoming Discover Address (ADISC) requestsJoe Eykholt
The local port facility has been replying to ADISC requests without looking to see if the remote port is logged in. This is incorrect. An ADISC request requires PLOGI first. It should be rejected if the sending remote port is not logged in. This is like other incoming requests that require login, all of which should be handled in the remote port module. Move the ADISC request handling from fc_lport.c to fc_rport.c. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: use ADISC to verify rport login stateJoe Eykholt
When rport_login is called on an rport that is already thought to be logged in, use ADISC. If that fails, redo PLOGI. This is less disruptive after fabric changes that don't affect the state of the target. Implement the sending of ADISC via fc_els_fill. Add ADISC state to the rport state machine. This is entered from READY and returns to READY after successful completion. If it fails, the rport is either logged off and deleted or re-does PLOGI. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: LOGO response code had extraeous enter_rtvJoe Eykholt
fc_rport_logo_resp() had a call to fc_rport_enter_rtv() if the LOGO was accepted. This must've been a copy/paste mistake, but it didn't matter since we don't stay in the LOGO state long enough to hit this code. Change fc_rport_logo_resp() to just enter the delete state no matter what. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: re-login to remote ports that send us LOGOJoe Eykholt
After a quick link flap, a target was seen to send us a LOGO. Apparently, it saw an RSCN reporting that we had dropped out of the fabric after we had logged back into it. This is likely in larger fabrics (more than 2 FC switches) after a quick link flap at the initiator. Each link transition causes an port-specific RSCN to the target. After the link comes back up, the initiator successfully discovers and does a PLOGI to the target before the target sees the first RSCN reporting the initiator is gone, and it sends a LOGO. The target may see a subsequent RSCN saying the port is back, but probably wouldn't send a PLOGI and leaves it up to the initiator to re-login. An RSCN can be delayed by the switches due to software layers but a PLOGI is forwarded in hardware causing the PLOGI to beat the RSCN. If a remote port is in the discovered set and sends a LOGO, re-login to it. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: fix rport error handling for login-required and invalid opsJoe Eykholt
When receiving an ELS request, if the request isn't recognized, the unsupported operation error should be given even if the port is not found or not logged in. Also, the LOGO request shouldn't give the login-required explanation. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: correctly handle incoming PLOGI request.Joe Eykholt
libfc receives PLOGIs from switches which are trying to discover what kind of devices are present, and from other initiators to find out if we're a target. As an initiator, some argue we don't need to handle incoming PLOGI requests, and we currently reject them from unknown remote ports, but accept them is we're in the middle of a PLOGI to the remote port. For eventual target implementations, we want to handle them always. For incoming PLOGI, don't fail if the rport_priv doesn't exist. Just create it and go become READY without going through PRLI. If PRLI occurs, then our roles will be set and we'll become READY again. Also, allow incoming PRLI in RTV state. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: improve debug messages for ELS response handlersJoe Eykholt
Improve lport and rport debug messages to indicate whether the response is LS_ACC, LS_RJT, closed, or timeout. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: fix: rport_recv_req needs disc_mutex when calling rport_lookupJoe Eykholt
The rport_lookup function must be called while holding the disc_mutex. Otherwise, the rdata could be deleted just after that by another thread. All callers now check the state after grabbing the rdata rp_mutex. Even though rport_lookup skips ports in DELETE state, it does that without holding the rdata rp_mutex, so that the state may change. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: move remote port lookup for ELS requests into fc_rport.c.Joe Eykholt
This moves the remote port lookup for incoming ELS requests into fc_rport.c, in preparation for handing PLOGI and LOGO from unknown rports. This changes the arg to rport_recv_req from an rdata to an lport. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: Always reset remote port roles when receiving PRLIRobert Love
Don't trust previous roles, reset them when we receive a PRLI. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: Initialize fc_rport_identifiers inside fc_rport_createRobert Love
Currently these values are initialized by the callers. This was exposed by a later patch that adds PLOGI request support. The patch failed to initialize the new remote port's roles and it caused problems. This patch has the rport_create routine initialize the identifiers and then the callers can override them with real values. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: don't do discovery before callback is setJoe Eykholt
It's possible to "restart" discovery before it was started if an RSCN is received early enough. We were jumping to 0 due to the disc_callback function pointer not getting set. Don't restart discovery if disc_callback is NULL. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: clean up point-to-point discovery code.Joe Eykholt
The discovery code had a special-case for the point-to-point mode, which used a bunch of code that wasn't really needed. Now that rport_create adds the rport to the discovery list, completely skip discovery for the point-to-point case. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: discovery gpn_ft parse bugJoe Eykholt
In fc_disc_gpn_ft_parse(), after fc_disc_done() is called, the disc state is changed by setting buf_len = 0. This is wrong since the discovery may have restarted. Instead, return after calling fc_disc_done. Also, return an error on memory allocation failure. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: discovery retry should clear pending first.Joe Eykholt
Currently fc_disc_timeout() restarts discovery only if it is not pending. When the timer is scheduled, the discovery is left pending, so the timeout never restarts it. Fix by not checking for pending in the timeout handler. If discovery is stopped and restarted in the meantime, the timeout will be canceled. Also, when a new discovery is started, the retry count wasn't cleared. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: fix: empty zone causes endless discovery retries.Joe Eykholt
On some switches, an empty zone causes GPN_FT to be rejected with reason 9 (unable) explanation 7 (FC-4 types not registered), which causes discovery to be retried endlessly. Treat this as just an empty response and consider discovery complete. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: handle discovery failure more correctly.Joe Eykholt
Abhijeet Joglekar wrote: "In gpn_ft_resp, if the payload is short, or unexpected response or out of sequence frame, then we just return and do nothing. We should either enter fc_disc_done() with DISC_EV_FAIL which will then restart any queued discovery requests or call lport module which will reset local port, or we should call fc_disc_error() so that the gpn_ft is retried. The situation as is causes discovery to remain pending and never get restarted, in these rare cases. We saw this due to a coding bug in fc_disc before. The only ways it could happen would be bugs, packet corruption or an FC fabric problem. Change it to fail discovery. The local port will restart discovery, although it probably should just give up until the next link flap. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: rearrange code in fc_disc_gpn_ft_resp()Joe Eykholt
Code cleanup for fc_disc_gpn_ft_resp(). Some of the fc_disc.c code was poorly formatted. For example, some lines in fc_disc.c were unnecessarily truncated and the buf variable could be eliminated. Also moved the increment of seq_count into fc_disc_gpn_ft_parse(), to avoid doing it separately before each call. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10[SCSI] libfc: discovery restart sequence error fixJoe Eykholt
When an RSCN is received during fabric discovery, it restarts. After the restart, disc->seq_count was incremented, so when the first frame was received, it was considered "out of sequence". That left the state disc->active, preventing further discoveries. Change to advance the sequence count before parsing, so that it won't be changed after a potential restart. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>