aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial/bfin_5xx.c
AgeCommit message (Collapse)Author
2007-12-24[Blackfin] serial driver: fix bug - cache the bits of the LSR on systems ↵Mike Frysinger
where the LSR is read-to-clear Cache the bits of the LSR on systems where the LSR is read-to-clear so that we can safely read the LSR in random places. this fixes older parts where break/framing/parity/overflow was not being detected at all in PIO mode, and this fixes newer parts where break/framing/parity/overflow was being reported all the time without being cleared. Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-23[Blackfin] serial driver: fix bug - should not wait for the TFI bit, just ↵Sonic Zhang
clear it when tx stop. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] serial driver: Fix bug serial driver in DMA mode spams history to ↵Sonic Zhang
console on shell restart http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=2920 Fix by increasing buffer tail immediately before starting tx dma. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] serial driver: Fix bug Free rx dma buffer in shutdown.Sonic Zhang
Kernel crash for the serial driver in DMA mode: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3679 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] serial driver: Clean up UART DMA code.Sonic Zhang
Start next TX DMA in tx dma handler instead of rx timer handler. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin Serial driver: Fix bug - serial driver in PIO mode cant handle ↵Sonic Zhang
input very quickly Output as many bytes as possible in PIO tx handler. This reduce the number of tx interrupts and shorten the delay to handle rx interrupt. So, rx overrun disappears. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-22[Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default ↵Michael Hennerich
- add argument or option Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin serial driver: pending a unique anomaly id, tie the break flood ↵Mike Frysinger
issue to ANOMALY_05000230 pending a unique anomaly id, tie the break flood issue to ANOMALY_05000230 as when that was fixed, the fallout also fixed the break flood Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: update kgdb patchSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: Initial patch to add earlyprintk supportRobin Getz
This allows debugging of problems which happen eary in the kernel boot process (after bootargs are parsed, but before serial subsystem is fully initialized) Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25Blackfin arch: use the [CS]SYNC() macros which include anomaly workarounds ↵Mike Frysinger
rather than __builtin_bfin_[cs]sync() Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12Blackfin serial driver: supporting BF548-EZKIT serial portRoy Huang
Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-29Blackfin arch: kgdb specific codeSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin serial driver: decouple PARODD and CMSPAR checking from PARENBMike Frysinger
as the termios info does not stipulate that the former are dependent on the latter Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin serial driver: actually implement the break_ctl() functionMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin serial driver: ignore framing and parity errorsMike Frysinger
if we get a break signal, we want to ignore framing and parity errors because those will always be set (by nature of the signal) Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin serial driver: hook up our UARTs STP bit with userspaces CMSPARMike Frysinger
so we can now do spaced/marked parity Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-05-21Blackfin serial driver: implement support for ignoring parity/break errorsMike Frysinger
properly setting up and respecting the read_status_mask / ignore_status_mask fields of the serial core Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin serial driver: fix overhead issueAubrey Li
Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07blackfin: serial driverBryan Wu
This patch implements the driver necessary use the Analog Devices Blackfin processor's Serial Port. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 23:26:03 +0000