aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial/sh-sci.h
AgeCommit message (Collapse)Author
2008-07-30serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression.Paul Mundt
As noted by Manuel: Commit c63847a3621d2bac054f5709783860ecabd0ee7e ("sh: Add SCIF2 support for SH7763.") broke build with CONFIG_EARLY_PRINTK enabled for me (SH7760): CC arch/sh/kernel/early_printk.o /mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c: In function 'scif_sercon_putc': /mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c:84: error: implicit declaration of function 'sci_SCFDR_in' Move the SH7763 definitions out on their own, so they don't create additional confusion within the SH7760/SH7780/SH7785 block. Restore the deleted SCFDR definition for these parts. Reported-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add SCIF2 support for SH7763.Nobuhiro Iwamatsu
SH7763 has 3 SCIF device. Current code supports SCIF0 and 1. SCIF0 and 1 are same register constitution, but only SCIF2 is different. I added support of SCIF2. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh-sci: avoid writing to nonexistent registersMagnus Damm
Only write to hardware in SCI_OUT() if the register size is valid. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh-sci: sh7722 lacks scsptr registersMagnus Damm
The sh7722 serial ports all lack SCSPTR registers, so mark them as nonexistent in the register table. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh-sci: improve sh7722 supportMagnus Damm
Improve sh7722 support for SCIF1 and SCIF2 and separate code from sh7366 implementation. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Add support for SH7723 CPU subtype.Paul Mundt
This adds basic support for the SH7723 MobileR2 CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14serial: sh-sci: Fix up SH-5 build.Paul Mundt
asm/hardware.h doesn't exist any more, and the definitions sh-sci.h depended on are provided through asm/cpu/addrspace.h these days. Kill off the bogus include. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: add support for sh7366 processorMagnus Damm
This patch adds sh7366 cpu supports. Just the most basic things like interrupt controller, clocks and serial port are included at this point. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SH7763 CPU subtype.Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add support for SH7721 CPU subtype.Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH7263 CPU support.Paul Mundt
This adds support for the SH7263 (SH-2A) CPU. This particular CPU is a superset of SH7203, adding some additional peripheral blocks and hooking up additional (reserved on SH7203) vectors in the INTC block. No visibly nasty surprises, yet.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH7203 CPU support.Paul Mundt
This adds support for the SH7203 (SH-2A) CPU. Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Remove SCI_NPORTS from sh-sci.hNobuhiro Iwamatsu
When SH7710 and SH7712 are used, SCI_NPORTS redefined. Remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off the remaining ST40 cruft.Paul Mundt
The ST40 stuff in-tree hasn't built for some time, and hasn't been updated for over 3 years. ST maintains their own out-of-tree changes and rebases occasionally, and that's ultimately where all of the ST40 users go anyways. In order for the ST40 code to be brought up to date most of the stuff removed in this changeset would have to be rewritten anyways, so there's very little benefit in keeping the remnants around either. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Add SH7720 CPU support.Markus Brunner
This adds support for the SH7720 (SH3-DSP) CPU. Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21serial: sh-sci: Shut up compiler warning for SH-X3 SCIF.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: remove support for sh7300 and solution engine 7300Magnus Damm
This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: sh-sci - fix SH7708 supportMagnus Damm
This patch makes sure the sci serial port driver compiles for sh7708. The approach taken is to treat the sh7708 as a subset of sh7706, sh7707, sh7709. sh7708 is very similar to sh7706, sh7707, sh7709, but only equipped with a single sci port. The platform data in setup-sh770x.c already limits the number of serial ports for sh7708 to a single one, so the non-existing scif ports pointed out in sh-sci.h will remain unused in case of sh7708. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25sh: remove support for sh73180 and solution engine 73180Magnus Damm
This patch removes old dead code: - kill off sh73180 cpu support - get rid of broken solution engine 73180 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20sh: Preliminary support for the SH-X3 CPU.Paul Mundt
This adds basic support for UP SH-X3. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Fix SH-4 CPU selects.Paul Mundt
Now that select no longer works for selecting the "closest" CPU, we have to explicitly reference the precise sub-type in the few places where it actually matters (presently only setup code and some legacy sh-sci cruft). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: MS7712SE01 board support.Nobuhiro Iwamatsu
Support the SH7712 (SH3-DSP) Solution Engine reference board. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Add SH7785 Highlander board support (R7785RP).Paul Mundt
This adds preliminary support for the SH7785-based Highlander board. Some of the Highlander support code is reordered so that most of it can be reused directly. This also plugs in missing SH7785 checks in the places that need it, as this is the first board to support the CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: SH-MobileR SH7722 CPU support.Paul Mundt
This adds CPU support for the SH7722. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12serial: sh-sci: Shut up various sci_rxd_in() gcc4 warnings.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: More flexible + SH7780 earlyprintk SCIF support.Paul Mundt
This makes the early printk support somewhat more flexible, moving the port definition to a config option, and making the port initialization configurable for sh-ipl+g users. At the same time, this allows us to trivially wire up the SH7780 SCIF0, so that's thrown in too more or less for free. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Add support for SH7206 and SH7619 CPU subtypes.Yoshinori Sato
This implements initial support for the SH7206 (SH-2A) and SH7619 (SH-2) MMU-less CPUs. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-04Remove all inclusions of <linux/config.h>Dave Jones
kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
2006-09-27serial: Rework sh-sci for driver model.Paul Mundt
sh-sci was turning in to an unmaintainable mess, especially with regards to the port list. This cleans it up quite a bit, and switches over to a platform device model where subtypes will register their port list individually in their setup code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-02-01[PATCH] sh: sh-sci clock framework updatesPaul Mundt
A couple of updates for the sh-sci serial driver: - Update for clock framework on sh. - Fix a compile error introduced by some h8300 changes. - Add SH7770/SH7780 subtype support. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!