aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2007-11-09Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits) sh: remove dead config symbols from SH code sh: Kill off broken snapgear ds1302 code. sh: Add a dummy vga.h. rtc: rtc-sh: Zero out tm value for invalid rtc states. rtc: sh-rtc: Handle rtc_device_register() failure properly. sh: Fix heartbeart on Solution Engine series sh: Remove SCI_NPORTS from sh-sci.h sh: Fix up PAGE_KERNEL_PCC() for nommu. sh: hs7751rvoip: Kill off dead IPR IRQ mappings. sh: hs7751rvoip: irq.c needs linux/interrupt.h. sh: Kill off __{copy,clear}_user_page(). sh: Optimized copy_{to,from}_user_page() for SH-4. sh: Wire up clear_user_highpage(). sh: Kill off the remaining ST40 cruft. superhyway: Handle device_register() retval properly. sh: kgdb sysrq depends on magic sysrq. sh: Add -Werror for clean directories. sh: Fix up kgdb build with modular sh-sci. sh: Export __{s,u}divsi3_i4i on all CPUs. sh: Fix up kgdb-on-NMI branch target. ...
2007-11-09Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (37 commits) [POWERPC] EEH: Make sure warning message is printed [POWERPC] Make altivec code in swsusp_32.S depend on CONFIG_ALTIVEC [POWERPC] windfarm: Fix windfarm thread freezer interaction [POWERPC] Fix si_addr value on low level hash failures [POWERPC] Refresh ppc64_defconfig and enable pasemi-related options [POWERPC] pasemi: Update defconfig [POWERPC] iSeries: Fix ref counting in vio setup [POWERPC] ] Fix memset size error [POWERPC] Fix link errors for allyesconfig [POWERPC] iSeries_init_IRQ non-PCI tidy [POWERPC] Change fallocate to match unistd.h on powerpc [POWERPC] EEH: Avoid crash on null device [POWERPC] EEH: Drivers that need reset trump others [POWERPC] EEH: Clean up comments [POWERPC] Fix off-by-one error in setting decrementer on Book E/4xx (v2) [POWERPC] Fix switch_slb handling of 1T ESID values [POWERPC] Fix build failure when CONFIG_VIRT_CPU_ACCOUNTING is not defined [POWERPC] Include udbg.h when using udbg_printf [POWERPC] Fix cache line vs. block size confusion [POWERPC] Fix sysctl table check failure on PowerMac ...
2007-11-07sh: Remove SCI_NPORTS from sh-sci.hNobuhiro Iwamatsu
When SH7710 and SH7712 are used, SCI_NPORTS redefined. Remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off the remaining ST40 cruft.Paul Mundt
The ST40 stuff in-tree hasn't built for some time, and hasn't been updated for over 3 years. ST maintains their own out-of-tree changes and rebases occasionally, and that's ultimately where all of the ST40 users go anyways. In order for the ST40 code to be brought up to date most of the stuff removed in this changeset would have to be rewritten anyways, so there's very little benefit in keeping the remnants around either. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-05serial: fix compile warning about putcYinghai Lu
drivers/serial/8250_early.c:80: warning: conflicting types for built-in function `putc' Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05PCI: pciserial_resume_one ignored return value of pci_enable_deviceDirk Hohndel
[PATCH] pciserial_resume_one ignored return value of pci_enable_device Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com> Acked-by: Alan Cox <alan@redhat.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-01[POWERPC] Uartlite: speed up console outputGrant Likely
Change the wait_tx routine to call cpu_relax() instead of udelay() to reduce console output latency and test for the TXFULL bit instead of TXEMPTY. That way the FIFO doesn't need to by 100% flushed before writing the next character. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-30serial: fix serial_txx9 console initializationAtsushi Nemoto
Since commit 97d97224ff361e08777fb33e0fd193ca877dac28 ("[SERIAL] Fix console initialisation ordering"), serial_core calls ->pm() on initialization even if the port was used for console. This behaviour breaks serial_txx9 console since The serial_txx9 driver initialize its port entirely on its ->pm() method if new state was 0. This patch adds checking for oldstate value to fix this probelm. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-29netdrvr/pcmcia: use IRQ_TYPE_DYNAMIC_SHARING flag for irq.Attributes.Komuro
The drivers below support IRQ-sharing. 3c574_cs, 3c589_cs, pcnet_cs, axnet_cs, smc91c92_cs, fmvj18x_cs. xirc2ps_cs, serial_cs. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-25serial: stop passing NULL to functions that expect dataAlan Cox
Earlier patches have removed the checking for old v new differences from the USB drivers so we can now pass in a valid blank old termios so that we don't to fill the drivers with magic hacks for console support Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-23m68knommu: new style ColdFire UART driverGreg Ungerer
A new style serial driver for the Freescale ColdFire UART to replace the old style one currently in the tree (drivers/serial/mcfserial.c). Currently this UART is only found in the ColdFire CPU family of parts (thus I prefixed this patch [M68KNOMMU]). This has been around for a long while now, tested on all available platforms. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-21Blackfin serial driver Kconfig: depend on DMA not being enabled rather than ↵Mike Frysinger
a specific DMA size Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-20typo fixesMatt LaPlante
Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19amba-pl011, rename BIT macroJiri Slaby
amba-pl011, rename BIT macro Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19remove asm/bitops.h includesJiri Slaby
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18serial: turn serial console suspend a boot rather than compile time optionAndres Salomon
Currently, there's a CONFIG_DISABLE_CONSOLE_SUSPEND that allows one to stop the serial console from being suspended when the rest of the machine goes to sleep. This is incredibly useful for debugging power management-related things; however, having it as a compile-time option has proved to be incredibly inconvenient for us (OLPC). There are plenty of times that we want serial console to not suspend, but for the most part we'd like serial console to be suspended. This drops CONFIG_DISABLE_CONSOLE_SUSPEND, and replaces it with a kernel boot parameter (no_console_suspend). By default, the serial console will be suspended along with the rest of the system; by passing 'no_console_suspend' to the kernel during boot, serial console will remain alive during suspend. For now, this is pretty serial console specific; further fixes could be applied to make this work for things like netconsole. Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@suspend2.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17jsm: Remove further unneeded crudAlan Cox
Remove some remaining vestiges of the old hacks jsm had to work around the old tty buffering. With the new tty buffering it simply doesn't matter any more. [michal.k.k.piotrowski@gmail.com: fix warning] Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Scott Kilau <scottk@digi.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16tty: bring the old cris driver back somewhere into the realm of new tty ↵Alan Cox
buffering Signed-off-by: Alan Cox <alan@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16m32r: serial: remove M32R_SIO_SHARE_IRQSHirokazu Takata
Remove an unused symbol M32R_SIO_SHARE_IRQS from drivers/serial/m32r_sio.h. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Cc: "Robert P. J. Day" <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16Add support for Wacom WACF007 and WACF008 to serial pnp driverMaik Broemme
Notebook manufacturer seems to built a newer Wacom pen enabled tablet to recent tablet pcs which are not recognized by the serial pnp driver. Attached is a patch which makes the newer Wacom WACF007 and WACF008 tablets useable with the serial driver. The device is fully compatible with it. Signed-off-by: Maik Broemme <mbroemme@plusserver.de> Cc: Andrey Panin <pazke@orbita1.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16serial_txx9: Use UPF_FIXED_PORTAtsushi Nemoto
The UPF_FIXED_PORT flags was introduced in 2.6.22 and it can be used instead of the driver specific verify_port routine. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16wake up from a serial portGuennadi Liakhovetski
Enable wakeup from serial ports, make it run-time configurable over sysfs, e.g., echo enabled > /sys/devices/platform/serial8250.0/tty/ttyS0/power/wakeup Requires # CONFIG_SYSFS_DEPRECATED is not set Following suggestions from Alan and Russell moved the may_wake_up checks to serial_core.c. This time actually tested - it does even work. Could someone, please, verify, that put_device after device_find_child is correct? Also would be nice to test with a Natsemi UART, that can wake up the system, if such systems exist. For this you just have to apply the patch below, issue the above "echo" command to one of your Natsemi port, suspend and resume your system, and verify that your Natsemi port still works. If you are actually capable of waking up the system from that port, would be nice to test that as well. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-168250_pci: Autodetect mainpine cardsAlan Cox
Add support for a whole range of boards. Some are partly autodetected but not fully correctly others (PCI Express notably) not at all. Stick all the right entries in. Thanks to Mainpine for information and testing. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16serial_txx9: cleanup includesAtsushi Nemoto
Do not include some header files already indluded by serial_core.h. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16Add support for PCMCIA card Sierra WIreless AC850Eric Leblond
Add support for Sierra Wireless AC850 which has the same Ids as the AC710/750 but has a different firmware. Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits) [ARM] 4578/1: CM-x270: PCMCIA support [ARM] 4577/1: ITE 8152 PCI bridge support [ARM] 4576/1: CM-X270 machine support [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put() [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols [ARM] pxa: PXA3xx base support [NET] smc91x: fix PXA DMA support code [SERIAL] Fix console initialisation ordering [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23) [ARM] Rename consistent_sync() as dma_cache_maint() [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32 [ARM] 4594/1: ns9xxx: use the new gpio functions [ARM] 4593/1: ns9xxx: implement generic clockevents ...
2007-10-15[SERIAL] Fix console initialisation orderingRussell King
Ensure pm callback is called upon initialisation to place port in correct power saving state. Ensure console is initialised prior to deciding whether to power down the port. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-14mpc52xx-uart: fix compile warning (format type mismatch)Grant Likely
Trivial compile warning fix Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (124 commits) sh: allow building for both r2d boards in same binary. sh: fix r2d board detection sh: Discard .exit.text/.exit.data at runtime. sh: Fix up some section alignments in linker script. sh: Fix SH-4 DMAC CHCR masking. sh: Rip out left-over nommu cond syscall cruft. sh: Make kgdb i-cache flushing less inept. sh: kgdb section mismatches and tidying. sh: cleanup struct irqaction initializers. sh: early_printk tidying. video: pvr2fb: Add TV (RGB) support to Dreamcast PVR driver. sh: Conditionalize gUSA support. sh: Follow gUSA preempt changes in __switch_to(). sh: Tidy up gUSA preempt handling. sh: __copy_user() optimizations for small copies. sh: clkfwk: Support multi-level clock propagation. sh: Fix URAM start address on SH7785. sh: Use boot_cpu_data for CPU probe. sh: Support extended mode TLB on SH-X3. sh: Bump MAX_ACTIVE_REGIONS for SH7785. ...
2007-10-12[ARM] pxa: update pxa serial driver to use clk supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: convert PXA serial drivers to use platform resourcesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-04[POWERPC] cpm: Describe multi-user ram in its own device node.Scott Wood
The way the current CPM binding describes available multi-user (a.k.a. dual-ported) RAM doesn't work well when there are multiple free regions, and it doesn't work at all if the region doesn't begin at the start of the muram area (as the hardware needs to be programmed with offsets into this area). The latter situation can happen with SMC UARTs on CPM2, as its parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't support moving it. It is now described with a muram node, similar to QE. The current CPM binding is sufficiently recent (i.e. never appeared in an official release) that compatibility with existing device trees is not an issue. The code supporting the new binding is shared between cpm1 and cpm2, rather than remain separated. QE should be able to use this code as well, once minor fixes are made to its device trees. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03[POWERPC] cpm_uart: Issue STOP_TX command before initializing console.Scott Wood
This prevents some bootloader/bootwrapper characters from being lost. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03[POWERPC] cpm_uart: sparse fixesScott Wood
Mostly a bunch of direct access to in/out conversions, plus a few cast removals, __iomem annotations, and miscellaneous cleanup. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03[POWERPC] cpm_uart: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING ↵Scott Wood
is set. The existing OF glue code was crufty and broken. Rather than fix it, it has been removed, and the serial driver now talks to the device tree directly. The non-CONFIG_PPC_CPM_NEW_BINDING code can go away once CPM platforms are dropped from arch/ppc (which will hopefully be soon), and existing arch/powerpc boards that I wasn't able to test on for this patchset get converted (which should be even sooner). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03[POWERPC] Uartlite: Revert register io access changesGrant Likely
Reverts commit a15da8eff3627b8368db7f5dd260e5643213d918 This driver is used by devices other than the xilinx opb-uartlite which depend on bytewise access to the registers. The change to 32 bit access does not work on these devices. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03[POWERPC] Uartlite: Let the console be initialized earlierGrant Likely
By configuring it earlier we get console output sooner which is helpful for debugging when the kernel crashes before the serial drivers are initialized. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03[POWERPC] Uartlite: Add of-platform-bus bindingGrant Likely
Add of_platform bus binding so this driver can be used with arch/powerpc Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03[POWERPC] Uartlite: Comment block tidyGrant Likely
Tidy the comments to split the driver into logical section; the main driver, the console driver, the platform bus binding, and module initialization and teardown. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03[POWERPC] Uartlite: Separate the bus binding from the driver properGrant Likely
Separate the bus binding code from the driver structure allocation code in preparation for adding the of_platform_bus bindings needed by arch/powerpc Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03[POWERPC] Uartlite: Add macro for uartlite device nameGrant Likely
Changed to make the following OF_platform bus binding patch a wee bit cleaner Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03[POWERPC] Uartlite: change name of ports to ulite_portsGrant Likely
Changed to match naming convention used in the rest of the module Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03[POWERPC] Uartlite: Fix reg io to access documented register sizeGrant Likely
The Uartlite data sheet defines the registers as 32 bit wide. This patch changes the register access to use 32 bit transfers and eliminates the magic +3 offset which is currently required to make the device work. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: John Williams <jwilliams@itee.uq.edu.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-09-28[POWERPC] Fix cpm_uart driver for cpm1 machinesJochen Friedrich
in cpm_uart_cpm1.h, DPRAM_BASE is assigned an address derived from cpmp. On ARC=ppc, this is a physical address with 1:1 DMA mapping which can't be used for arithmetric compare operations with virtual addresses returned by cpm_dpram_addr. This patch changes the assignment to use cpm_dpram_addr as well, like in cpm_uart_cpm2.h. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-25[SUNSAB]: Fix broken SYSRQ.Thomas Bogendoerfer
Include SYSRQ support for SUNSAB if SUNSAB_CONSOLE is selected Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-22[POWERPC] Optionally use new device number for pmac_zilogDavid Woodhouse
This adds the option for the pmac_zilog driver to use the major/minor numbers recently allocated specifically for it (/dev/ttyPZn) instead of the /dev/ttySn numbers. The advantage of doing this is that it allows the pmac_zilog and 8250 drivers to coexist. The disadvantage of doing this is that it is a user-visible ABI change and it will break existing working setups on powermacs, and could be confusing to users. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-21serial: sh-sci: kgdb console build fixes.Paul Mundt
The kgdb console code requires uart_set_options() and friends, which are only provided by the serial core when console support is enabled. These were sitting under CONFIG_SH_KGDB and resulted in a link error when console support wasn't enabled, work that by rolling the console routines under CONFIG_SH_KGDB_CONSOLE, which they should have been all along. Signed-off-by: Paul Mundt <lethal@linux-sh.org>