aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2008-04-30serial_core: Prepare for BKL push downAlan Cox
Instead of checking for the BKL in these methods, take it ourselves. That avoids propogating it into the serial drivers and we can then fix them later on. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-3068360serial: Note that there isn't any info->mcr lockingAlan Cox
Noticed while auditing the code for the BKL elimination project Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Blackfin serial driver: this driver enable SPORTs on Blackfin emulate UARTBryan Wu
Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits) [ARM] pxa: fix 1c104e0e4f6ab396960c058e95e18bdedcac945b [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed [ARM] am79c961a: platform_get_irq() may return signed unnoticed [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page() [ARM] Feroceon: fix function alignment in proc-feroceon.S [ARM] Orion: catch a couple more alternative spellings of PCIe [ARM] Orion: fix orion-ehci platform resource end addresses [ARM] Orion: fix ->map_irq() PCIe bus number check [ARM] Orion: fix ioremap() optimization [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check kprobes/arm: fix decoding of arithmetic immediate instructions kprobes/arm: fix cache flush address for instruction stub [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2 [ARM] 5021/1: at91: buildfix for sam9263 + PM [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263 [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake() [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info [ARM] 5014/1: Cleanup reset state before entering suspend or resetting. ...
2008-04-28[ARM] serial: s3c2410: platform_get_irq() may return signed unnoticedRoel Kluin
port->irq is unsigned, platform_get_irq() may return signed unnoticed Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-28Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (45 commits) [MIPS] Pb1200/DBAu1200: move platform code to its proper place [MIPS] Fix handling of trap and breakpoint instructions [MIPS] Pb1200: do register SMC 91C111 [MIPS] DBAu1200: fix bad SMC 91C111 resource size [NET] Kconfig: Rename MIKROTIK_RB500 -> MIKROTIK_RB532 [MIPS] IP27: Fix build bug due to missing include [MIPS] Fix some sparse warnings on traps.c and irq-msc01.c [MIPS] cevt-gt641xx: Kill unnecessary include [MIPS] DS1287: Add clockevent driver [MIPS] add DECstation I/O ASIC clocksource [MIPS] rbtx4938: minor cleanup [MIPS] Alchemy: kill unused PCI_IRQ_TABLE_LOOKUP macro [MIPS] rbtx4938: misc cleanups [MIPS] jmr3927: use generic txx9 gpio [MIPS] rbhma4500: use generic txx9 gpio [MIPS] generic txx9 gpio support [MIPS] make fallback gpio.h gpiolib-friendly [MIPS] unexport null_perf_irq() and make it static [MIPS] unexport rtc_mips_set_time() [MIPS] unexport copy_from_user_page() ...
2008-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: video drivers: add facility level sparc: tcx.c make tcx_init and tcx_exit static sparc: ffb.c make ffb_init and ffb_exit static sparc: cg14.c make cg14_init and cg15_exit static sparc: bw2.c fix bw2_exit sparc64: Fix accidental syscall restart on child return from clone/fork/vfork. sparc64: Clean up handling of pt_regs trap type encoding. sparc: Remove old style signal frame support. sparc64: Kill bogus RT_ALIGNEDSZ macro from signal.c sparc: sunzilog.c remove unused argument sparc: fix drivers/video/tcx.c warning sparc64: Kill unused local ISA bus layer. input: Rewrite sparcspkr device probing. sparc64: Do not ignore 'pmu' device ranges. sparc64: Kill ISA_FLOPPY_WORKS code. sparc64: Kill CONFIG_SPARC32_COMPAT sparc64: Cleanups and corrections for arch/sparc64/Kconfig sparc64: Fix wedged irq regression.
2008-04-28[MIPS] Alchemy: move UART platform code to its proper placeSergei Shtylyov
Move the code registering the Alchemy UART platform devices from drivers/serial/ to its proper place, into the Alchemy platform code. Fix the related Kconfig entry, while at it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28atmel_serial: remove duplicated macro definitionMichael Trimarchi
After commit 39d4c922b596633da86878b1a5cc881785b8e5fa (atmel_serial: fix uart/console concurrent access) the UART_GET_TCR macro got redefined. This patch removes the duplicated definition. Signed-off-by: michael trimarchi <trimarchimichael@evidence.eu.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28serial: use time_before, time_before_eq, etcJulia Lawall
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ #include <linux/jiffies.h> @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28serial 8250: tighten test for using backup timerAlex Williamson
Thomas Koeller had reported an issue where a device that had been making use of the UART_BUG_TXEN code in the 8250 driver was mistakenly being caught by the backup timer test, causing the device to work improperly. To fix this, tighten the test requirements to enable the backup timer workaround. The backup timer is really meant to catch UARTs that don't re-assert the THRE interrupt. The expectation is that they do initially assert THRE. This patch clarifies the test. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Cc: Thomas Koeller <thomas@koeller.dyndns.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28serial: add vr41xx_siu_early_setup() for serial consoleYoichi Yuasa
Add vr41xx_siu_early_setup() for serial console. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28uart_get_baud_rate: stop mangling termiosAlan Cox
Russell King noticed this one: We have to avoid replacing B0 when we pick a baud rate for a "hung up" port. Ugly but the proper fix is in the tty layer and means changing the tty<->serial interfaces so we will defer that for now. [akpm@linux-foundation.org: fix uninitialised var] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28Fix tty speed handling on 8250Alan Cox
We try and write the correct speed back but the serial midlayer already mangles the speed on us and that means if we request B0 we report back B9600 when we should not. For now we'll hack around this in the drivers and serial code, pending a better long term solution. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28serial: silence section mismatch warnings in 8250_pciSam Ravnborg
Fix following warnings: WARNING: drivers/serial/built-in.o(.data+0x5b8): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_ite887x_exit() WARNING: drivers/serial/built-in.o(.data+0x5e0): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit() WARNING: drivers/serial/built-in.o(.data+0x608): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit() WARNING: drivers/serial/built-in.o(.data+0x658): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit() WARNING: drivers/serial/built-in.o(.data+0x680): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit() WARNING: drivers/serial/built-in.o(.data+0x6a8): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit() WARNING: drivers/serial/built-in.o(.data+0x6d0): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit() WARNING: drivers/serial/built-in.o(.data+0x6f8): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit() WARNING: drivers/serial/built-in.o(.data+0x720): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit() WARNING: drivers/serial/built-in.o(.data+0x748): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit() pci_serial_quirks contains a number of function pointers where the referenced function is annotated __devexit. This is OK so we annotate pci_serial_quirks with __refdata to ignore the __devexit references Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28crisv10: prepare for BKL push downAlan Cox
Just the modem bits this time Signed-off-by: Alan Cox <alan@redhat.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28dz: test after postfix decrement fails in dz_console_putchar()Roel Kluin
When loops reaches 0 the postfix decrement still subtracts, so the subsequent test fails. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Johannes Weiner <hannes@saeurebad.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-26sparc: sunzilog.c remove unused argumentRobert Reif
Remove unused argument in function call. Signed-off-by: Robert Reif <reif@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-25Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (49 commits) [POWERPC] Add zImage.iseries to arch/powerpc/boot/.gitignore [POWERPC] bootwrapper: fix build error on virtex405-head.S [POWERPC] 4xx: Fix 460GT support to not enable FPU [POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts [POWERPC] Xilinx: of_serial support for Xilinx uart 16550. [POWERPC] Xilinx: boot support for Xilinx uart 16550. [POWERPC] celleb: Add support for PCI Express [POWERPC] celleb: Move miscellaneous files for Beat [POWERPC] celleb: Move a file for SPU on Beat [POWERPC] celleb: Move files for Beat mmu and iommu [POWERPC] celleb: Move files for Beat hvcall interfaces [POWERPC] celleb: Move the SCC related code for celleb [POWERPC] celleb: Move the files for celleb base support [POWERPC] celleb: Consolidate io-workarounds code [POWERPC] cell: Generalize io-workarounds code [POWERPC] Add CONFIG_PPC_PSERIES_DEBUG to enable debugging for platforms/pseries [POWERPC] Convert from DBG() to pr_debug() in platforms/pseries/ [POWERPC] Register udbg console early on pseries LPAR [POWERPC] Mark udbg console as CON_ANYTIME, ie. callable early in boot [POWERPC] Set udbg_console index to 0 ...
2008-04-24[POWERPC] Xilinx: of_serial support for Xilinx uart 16550.John Linn
The Xilinx 16550 uart core is not a standard 16550 because it uses word-based addressing rather than byte-based addressing. With additional properties it is compatible with the open firmware 'ns16550' compatible binding. This code updates the of_serial driver to handle the reg-offset and reg-shift properties to enable this core to be used. Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (85 commits) Blackfin char driver for Blackfin on-chip OTP memory (v3) Blackfin Serial Driver: fix bug - use mod_timer to replace only add_timer. Blackfin Serial Driver: the uart break anomaly has been given its own number, so switch to it Blackfin Serial Driver: use BFIN_UART_NR_PORTS to help SIR driver in uart port. Blackfin Serial Driver: Fix bug - kernel hangs when accessing uart 0 on bf537 when booting u-boot and linux on uart 1 Blackfin Serial Driver: punt unused lsr variable Blackfin Serial Driver: Enable IR function when user application (irattach /dev/ttyBFx -s) call TIOCSETD ioctl with line discipline N_IRDA [Blackfin] arch: add include/boot .gitignore files [Blackfin] arch: Functional power management support: Add support for cpu frequency scaling [Blackfin] arch: Functional power management support: Remove broken cpu frequency scaling drivers [Blackfin] arch: Equalize include files: Add PLL_DIV Masks [Blackfin] arch: Add a warning about the value of CLKIN. [Blackfin] arch: take DDR DEVWD into consideration as well for BF548 [Blackfin] arch: Remove the circular buffering mechanism for exceptions [Blackfin] arch: lose unnecessary dependency on CONFIG_BFIN_ICACHE for MPU [Blackfin] arch: fix bug - before assign new channel to the map register, need clear the bits first. [Blackfin] arch: add Blackfin on-chip SIR IrDA driver support [Blackfin] arch: BF54x memsizes are in mbits, not mbytes [Blackfin] arch: try to remove condition that causes double fault, by checking current before it gets dereferenced [Blackfin] arch: Update anomaly list. ...
2008-04-25Blackfin Serial Driver: fix bug - use mod_timer to replace only add_timer.Sonic Zhang
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=4045 If adding timer in both timer handler and rx interrupt, a timer may be added when it is till in the pending list. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25Blackfin Serial Driver: the uart break anomaly has been given its own ↵Mike Frysinger
number, so switch to it Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25Blackfin Serial Driver: use BFIN_UART_NR_PORTS to help SIR driver in uart port.Graf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24sparc: sunzilog uart orderRobert Reif
I have a sparcstation 20 clone with a lot of on board serial ports. The serial core code assumes that uarts are assigned contiguously and that may not be the case when there are multiple zs devices present. This patch insures that uart chips are placed in front of keyboard/mouse chips in the port table. ffd37420: ttyS0 at MMIO 0xf1100000 (irq = 44) is a zs (ESCC) Console: ttyS0 (SunZilog zs0) console [ttyS0] enabled ffd37420: ttyS1 at MMIO 0xf1100004 (irq = 44) is a zs (ESCC) ffd37500: Keyboard at MMIO 0xf1000000 (irq = 44) is a zs ffd37500: Mouse at MMIO 0xf1000004 (irq = 44) is a zs ffd3c5c0: ttyS2 at MMIO 0xf1100008 (irq = 44) is a zs (ESCC) ffd3c5c0: ttyS3 at MMIO 0xf110000c (irq = 44) is a zs (ESCC) ffd3c6a0: ttyS4 at MMIO 0xf1100010 (irq = 44) is a zs (ESCC) ffd3c6a0: ttyS5 at MMIO 0xf1100014 (irq = 44) is a zs (ESCC) ffd3c780: ttyS6 at MMIO 0xf1100018 (irq = 44) is a zs (ESCC) ffd3c780: ttyS7 at MMIO 0xf110001c (irq = 44) is a zs (ESCC) Signed-off-by: Robert Reif <reif@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-23Blackfin Serial Driver: Fix bug - kernel hangs when accessing uart 0 on ↵Sonic Zhang
bf537 when booting u-boot and linux on uart 1 Wait only when this UART is enabled. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3995 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24Blackfin Serial Driver: punt unused lsr variableMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-21Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits) [POWERPC] Fix compile breakage for 64-bit UP configs [POWERPC] Define copy_siginfo_from_user32 [POWERPC] Add compat handler for PTRACE_GETSIGINFO [POWERPC] i2c: Fix build breakage introduced by OF helpers [POWERPC] Optimize fls64() on 64-bit processors [POWERPC] irqtrace support for 64-bit powerpc [POWERPC] Stacktrace support for lockdep [POWERPC] Move stackframe definitions to common header [POWERPC] Fix device-tree locking vs. interrupts [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const [POWERPC] Remove unused __max_memory variable [POWERPC] Simplify xics direct/lpar irq_host setup [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ() [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade() [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c [POWERPC] Use asm-generic/bitops/find.h in bitops.h [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup [POWERPC] 85xx: Fix the size of qe muram for MPC8568E [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier. [POWERPC] 86xx: mark functions static, other minor cleanups ...
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits) SCSI: convert struct class_device to struct device DRM: remove unused dev_class IB: rename "dev" to "srp_dev" in srp_host structure IB: convert struct class_device to struct device memstick: convert struct class_device to struct device driver core: replace remaining __FUNCTION__ occurrences sysfs: refill attribute buffer when reading from offset 0 PM: Remove destroy_suspended_device() Firmware: add iSCSI iBFT Support PM: Remove legacy PM (fix) Kobject: Replace list_for_each() with list_for_each_entry(). SYSFS: Explicitly include required header file slab.h. Driver core: make device_is_registered() work for class devices PM: Convert wakeup flag accessors to inline functions PM: Make wakeup flags available whenever CONFIG_PM is set PM: Fix misuse of wakeup flag accessors in serial core Driver core: Call device_pm_add() after bus_add_device() in device_add() PM: Handle device registrations during suspend/resume block: send disk "change" event for rescan_partitions() sysdev: detect multiple driver registrations ... Fixed trivial conflict in include/linux/memory.h due to semaphore header file change (made irrelevant by the change to mutex).
2008-04-21Merge branch 'semaphore' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc * 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: Deprecate the asm/semaphore.h files in feature-removal-schedule. Convert asm/semaphore.h users to linux/semaphore.h security: Remove unnecessary inclusions of asm/semaphore.h lib: Remove unnecessary inclusions of asm/semaphore.h kernel: Remove unnecessary inclusions of asm/semaphore.h include: Remove unnecessary inclusions of asm/semaphore.h fs: Remove unnecessary inclusions of asm/semaphore.h drivers: Remove unnecessary inclusions of asm/semaphore.h net: Remove unnecessary inclusions of asm/semaphore.h arch: Remove unnecessary inclusions of asm/semaphore.h
2008-04-21Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (212 commits) [ARM] pxa: Phycore pcm-990-specific code for the PXA270 Quick Capture driver [ARM] pxa: V4L2 soc_camera driver for PXA270 [ARM] pxa: restrict availability of pxa2xx PCMCIA drivers [ARM] 5005/1: BAST: Fix kset_name initialiser [ARM] 4967/1: Adds functions to set clkout rate for Samsung S3C2410 [ARM] 4988/1: Add GPIO lib support to the EP93xx [ARM] Add initial sparsemem support [ARM] pxa: initialise PXA devices before platform init code [ARM] 5002/1: tosa: add two more leds [ARM] 5004/1: Tosa: make several unreferenced structures static. [ARM] 5003/1: Shut up sparse warnings [ARM] 4977/2: soc - pxa2xx-ac97 - Add missing clk_enable() [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line [ARM] 4974/1: Drop unused leds-tosa. [ARM] 4973/1: Tosa: use leds-gpio driver. [ARM] 4972/1: Tosa: convert scoop GPIOs usage to generic gpio code [ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks [ARM] pxa: lubbock: move mis-placed SPI info [ARM] 4970/1: tosa: correct gpio used for wake up. [ARM] 4966/1: magician: add MFP pin configuration ...
2008-04-19PM: Fix misuse of wakeup flag accessors in serial coreAlan Stern
This patch (as1059) fixes a mistake in the way the serial core initializes a device's wakeup settings. It should use the accessor routine instead of relying on a macro producing an lvalue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19Merge branch 'merge-fixes' into develRussell King
2008-04-19Merge branch 'omap2-upstream' into develRussell King
2008-04-18drivers: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18sh: Add support for SH7723 CPU subtype.Paul Mundt
This adds basic support for the SH7723 MobileR2 CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-17kgdb: Kconfig fixAndrew Morton
ERROR: "uart_parse_options" [drivers/serial/serial_core.ko] undefined! Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17kgdb: kgdboc pl011 I/O moduleJason Wessel
Implement the serial polling hooks for the pl011 uart for use with kgdboc. This patch was specifically tested on the ARM Versatile AB reference platform. [ mingo@elte.hu: minor cleanups. ] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17kgdb: fix kgdboc dynamic module configurationJason Wessel
Fix the run time configuration of kgdboc such that it does not default to 9600 baud if you use the "echo" command to configure the sysfs module paramater. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17consoles: polling support, kgdbocJason Wessel
polled console handling support, to access a console in an irq-less way while in debug or irq context. absolutely zero impact as long as CONFIG_CONSOLE_POLL is disabled. (which is the default) [ jan.kiszka@siemens.com: lots of cleanups ] [ mingo@elte.hu: redesign, splitups, cleanups. ] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17[ARM] 4999/1: <IMX UART>: fix membaseSascha Hauer
The membase field in struct uart_port should be the the physical address. This patch fixes it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4998/1: <IMX UART>: do not use hardcoded io space sizeSascha Hauer
Do not use hardcoded io space size. Instead use the information provided by the resource. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4996/1: <IMX UART>: do not enable tx empty interrupt on startupSascha Hauer
We are not interested in tranceiver empty interrupts until we actually sent a buffer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4995/1: <IMX UART>: Do not use URXD_CHARRDY for pollingSascha Hauer
Do not use the URXD_CHARRDY bit for polling for new characters. This works on i.MX1, but on MX31 the datasheet states that this bit should not be used for polling. On MX27 it is even worse, here we get a bus error when we access the read FIFO when no character is present. Instead, use USR2_RDR (receive data ready) bit. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4994/1: <IMX UART>: Move error handling into execution pathSascha Hauer
Move the error handling code for erroneous receive characters into execution path. This makes the code more readable and the compiler should know how to optimize this, right? Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4993/1: <IMX UART>: Trivial: Remove unused definesSascha Hauer
This patch removes the unused defines NR_PORTS and IMX_ISR_PASS_LIMIT in the imx serial driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[POWERPC] QE: UCC nodes cleanupAnton Vorontsov
- get rid of `model = "UCC"' in the ucc nodes It isn't used anywhere, so remove it. If we'll ever need something like this, we'll use compatible property instead. - replace last occurrences of device-id with cell-index. Drivers are modified for backward compatibility's sake. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] cpm_uart: Allocate DPRAM memory for SMC ports on CPM2-based platforms.Laurent Pinchart
This patch allocates parameter RAM for SMC serial ports without relying on previous initialisation by a boot loader or a wrapper layer. SMC parameter RAM on CPM2-based platforms can be allocated anywhere in the general-purpose areas of the dual-port RAM. The current code relies on the boot loader to allocate a section of general-purpose CPM RAM and gets the section address from the device tree. This patch modifies the device tree address usage to reference the SMC parameter RAM base pointer instead of a pre-allocated RAM section and allocates memory from the CPM dual-port RAM when initialising the SMC port. CPM1-based platforms are not affected. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-15serial: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable serial platform drivers, to re-enable auto loading. NOTE that Kconfig for some of these drivers doesn't allow modular builds, and thus doesn't match the driver source's unload support. Presumably their unload code is buggy and/or weakly tested... [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-14Merge branch 'linux-2.6'Paul Mackerras
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 23:24:24 +0000