aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2009-09-23spi: prefix modalias with "spi:"Anton Vorontsov
This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22Merge branch 'master' into for-linusRussell King
2009-09-21Merge branch 'devel' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-09-19uartlite: support shared interrupt linesPeter Korsgaard
Adapt isr to work with shared interrupt lines. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19Set proper console speed on resume if console suspend is disabledDeepak Saxena
Commit b5b82df6, from May 2007, breaks no_console_suspend on the OLPC XO laptop. Basically what happens is that upon returning from resume, serial8250_resume_port() will reconfigure the port for high speed mode and all console output will be garbled, making debug of the resume path painful. This patch modifies uart_resume_port() to reset the port to the state it was in before we suspended. Original patch by Marcelo Tosatti Second patch by Deepak then reworked by Alan to fit with the tty changes before it got submitted. Also fixed the console path to set c_i/ospeed as some drivers require the termios fields are valid Signed-off-by: Deepak Saxena <dsaxena@laptop.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: introduce tty krefsAlan Cox
Initially just use the helper and thus krefs when we set and clear the port values. Signed-off-by: Alan Cox <alan@linux.intel.com>
2009-09-19serial: kill USF_CLOSING_* definitionsAlan Cox
The serial layer for some reason uses different defines for the special case close delays and then conditionally switches to/from the normal ones in the ioctls. Remove this rather pointless abstraction Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: move port users helperAlan Cox
This little helper is now tty_port specific and useful generally so move it Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: move delta_msr_wait into the tty_portAlan Cox
This is used by various drivers not just serial and can be extracted as commonality Signed-off-by: Alan Cox <alan@linux.intel.com>
2009-09-19serial: replace the state mutex with the tty port mutexAlan Cox
They cover essentially the same stuff and we can therefore fold it into the tty_port one. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: move the flags into the tty_port fieldAlan Cox
Fortunately the serial layer was designed to use the same flag values but with different names. It has its own SUSPENDED flag which is a free slot in the ASYNC flags so we allocate it in the ASYNC flags instead. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: move count into the tty_port versionAlan Cox
Remove more stuff from the serial special case code Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: use tty_port pointers in the core codeAlan Cox
Extract out a lot of the x.port. uses and also show up where there are things left to be isolated that prevent use using the port helpers in the serial layer at this point Signed-off-by: Alan Cox <alan@linux.intel.com>
2009-09-19serial: Fold closing_* fields into the tty_port onesAlan Cox
Remove some more serial specific use Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: kill off uart_infoAlan Cox
We moved this into uart_state, now move the fields out of the separate structure and kill it off. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-198250: Now honours baud rate lower boundsAnton Vorontsov
A platform clock drives 8250 ports in most SOC systems, the clock might run at high frequencies, and so it's not always possible to downscale uart clock to a desired value. Currently the 8250 uart driver accepts not supported baud rates, and what is worse, it is doing this silently, and then passes not accepted values to a new termios, so userspace has no chance to catch this kind of errors (userspace verifies that settings were accepted by reading back and comparing the settings). This patch fixes the issue by passing minimum baud rate to the uart_get_baud_rate() call, the call should take care of all bounds, so userspace should now report: # stty -F /dev/ttyS0 speed 300 115200 stty: /dev/ttyS0: unable to perform all requested operations p.s. uart_get_baud_rate() falls back to 9600, which still might be too low for some 10 GHz platforms, but that's a separate issue, and we can wait with fixing this till we find such a platform. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: 8250: add IRQ trigger supportVikram Pandita
There is currently no provision for passing IRQ trigger flags for serial IRQs with triggering requirements (such as GPIO IRQs) This patch adds irqflags to plat_serial8250_port that can be passed from board file to reqest_irq() of 8250 driver Changes are backward compatible with boards passing UPF_SHARE_IRQ flag Tested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq [Moved new flag to end to fix bugs in the original with the old_serial array -- Alan] Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19tty: icom: bit and/or confusion?Roel Kluin
Previously, if any bit other than CMD_SND_BREAK was set, CMD_SND_BREAK was not unset. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19tty: serial/pcmcia: add ID for Advantech cardWolfram Sang
Add ID as reported in: http://lists.infradead.org/pipermail/linux-pcmcia/2009-May/006127.html Reported-by: Kenneth Moorman <KMoorman@transy.edu> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: bfin_5xx: fix building as module when early printk is enabledMike Frysinger
Since early printk only makes sense/works when the serial driver is built into the kernel, disable the option for this driver when it is going to be built as a module. Otherwise we get build failures due to the ifdef handling. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits) sh: mach-ecovec24: Add user debug switch support sh: Kill off unused se_skipped in alignment trap notification code. sh: Wire up HAVE_SYSCALL_TRACEPOINTS. video: sh_mobile_lcdcfb: use both register sets for display panning video: sh_mobile_lcdcfb: implement display panning sh: Fix up sh7705 flush_dcache_page() build. sh: kfr2r09: document the PLL/FLL <-> RF relationship. sh: mach-ecovec24: need asm/clock.h. sh: mach-ecovec24: deassert usb irq on boot. sh: Add KEYSC support for EcoVec24 sh: add kycr2_delay for sh_keysc sh: cpufreq: Include CPU id in info messages. sh: multi-evt support for SH-X3 proto CPU. sh: clkfwk: remove bogus set_bus_parent() from SH7709. sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300) sh: Add EcoVec24 romImage defconfig sh: USB disable process is needed if romImage boot for EcoVec24 sh: EcoVec24: add HIZA setting for LED sh: EcoVec24: write MAC address in boot sh: Add romImage support for EcoVec24 ...
2009-09-18Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Clean up linker script using standard macros. [IA64] Use standard macros for page-aligned data. [IA64] Use .ref.text, not .text.init for start_ap. [IA64] sgi-xp: fix printk format warnings [IA64] ioc4_serial: fix printk format warnings [IA64] mbcs: fix printk format warnings [IA64] pci_br, fix infinite loop in find_free_ate() [IA64] kdump: Short path to freeze CPUs [IA64] kdump: Try INIT regardless of [IA64] kdump: Mask INIT first in panic-kdump path [IA64] kdump: Don't return APs to SAL from kdump [IA64] kexec: Unregister MCA handler before kexec [IA64] kexec: Make INIT safe while transition to [IA64] kdump: Mask MCA/INIT on frozen cpus Fix up conflict in arch/ia64/kernel/vmlinux.lds.S as per Tony's suggestion.
2009-09-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits) be2net: fix some cmds to use mccq instead of mbox atl1e: fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMA pkt_sched: Fix qstats.qlen updating in dump_stats ipv6: Log the affected address when DAD failure occurs wl12xx: Fix print_mac() conversion. af_iucv: fix race when queueing skbs on the backlog queue af_iucv: do not call iucv_sock_kill() twice af_iucv: handle non-accepted sockets after resuming from suspend af_iucv: fix race in __iucv_sock_wait() iucv: use correct output register in iucv_query_maxconn() iucv: fix iucv_buffer_cpumask check when calling IUCV functions iucv: suspend/resume error msg for left over pathes wl12xx: switch to %pM to print the mac address b44: the poll handler b44_poll must not enable IRQ unconditionally ipv6: Ignore route option with ROUTER_PREF_INVALID bonding: make ab_arp select active slaves as other modes cfg80211: fix SME connect rc80211_minstrel: fix contention window calculation ssb/sdio: fix printk format warnings p54usb: add Zcomax XG-705A usbid ...
2009-09-16Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/sh/kernel/vmlinux.lds.S
2009-09-15[IA64] ioc4_serial: fix printk format warningsRandy Dunlap
drivers/serial/ioc4_serial.c:943: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'long long unsigned int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Pat Gefre <pfg@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-09-15pcnet_cs: add cis of Linksys multifunction pcmcia cardKen Kawasaki
pcnet_cs,serial_cs: add cis of Linksys lan&modem mulitifunction pcmcia card and some modem card(MT5634ZLX, RS-COM-2P). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-12Merge branch 'master' into develRussell King
2009-09-12Merge branch 'devel-stable' into develRussell King
Conflicts: MAINTAINERS arch/arm/mm/fault.c
2009-09-12Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and ↵Russell King
'w90x900' into devel
2009-09-10[ARM] pxa: update pxa serial driver to use 'struct dev_pm_ops'Mike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-02ARM: 5688/1: ks8695_serial: disable_irq() lockupDick Hollenbeck
disable_irq() cannot be called from interrupt context without self imposed deadlock. This was happening in ks8695uart_stop_tx(). Signed-off-by: Dick Hollenbeck <dick@softplc.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driverLeo Chen
Add suspend/resume functions to the AMBA pl011 serial driver. Signed-off-by: Leo Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-31CRIS: fix defconfig build failureIngo Molnar
The CRIS defconfig fails to build with: drivers/serial/crisv10.c: In function 'rs_wait_until_sent': drivers/serial/crisv10.c:3926: error: implicit declaration of function 'lock_kernel' drivers/serial/crisv10.c:3943: error: implicit declaration of function 'unlock_kernel' Include smp_lock.h. LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2009-08-23Merge branches 'sh/hwblk' and 'sh/pm-runtime'Paul Mundt
2009-08-23Merge branch 'sh/hwblk' into sh/pm-runtimePaul Mundt
2009-08-21sh: Add initial support for SH7757 CPU subtypeYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-17Merge branch 'next-s3c' of git://aeryn.fluff.org.uk/bjdooks/linux into ↵Russell King
devel-stable
2009-08-16ARM: S5PC100: UART and SerialByungho Min
Serial driver of S5PC100 is the same as S3C6400, so S5PC100 shares the serial driver with S3C6400. Uart driver is copied from plat-s3c64xx to plat-s5pc1xx, as I do not use plat-s3c64xx directory. Signed-off-by: Byungho Min <bhmin@samsung.com> [ben-linux@fluff.org: title fixup] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-15Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King
devel-stable
2009-08-14ARM: S3C64XX: serial: Fix a typo in KconfigRamax Lo
The typo causes drivers/serial/s3c6400.c not being built for s3c6400 platform. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-13Merge branch 'sh/stable-updates'Paul Mundt
2009-08-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) ARM: 5639/1: arm: clkdev.c should include <linux/clk.h> ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCH ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers ARM: S3C64XX: serial: Fix section mismatch warning ARM: S3C24XX: serial: Fix section mismatch warnings ARM: S3C: PWM fix for low duty cycle ARM: 5597/1: [PCI] reset all internal hardware prior PCI initialization ARM: 5627/1: Fix restoring of lr at the end of mcount ARM: 5624/1: Document cache aliasing region S3C64XX: Fix ARMCLK configuration S3C64XX: Fix get_rate() for ARMCLK S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchip mx3 defconfig update mx27 defconfig update ARM: 5623/1: Treo680: ir shutdown typo fix ARM: includecheck fix: plat-stmp3xxx/pinmux.c ARM: includecheck fix: plat-s3c64xx/pm.c ARM: includecheck fix: mach-omap2/mcbsp.c ARM: includecheck fix: mach-omap1/mcbsp.c ARM: includecheck fix: board-sffsdr.c ...
2009-08-07i.MX serial: do not use #ifdef CONFIG_ARCH_*Sascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-05ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in driversAndrew Victor
Stop referencing CLOCK_TICK_RATE in the KS8695 drivers, rather refer to a KS8695_CLOCK_RATE. Issue pointed out by Russell King on arm-linux-kernel mailing list. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx powerpc/86xx: Update GE Fanuc sbc310 default configuration powerpc/86xx: Update defconfig for GE Fanuc's PPC9A cpm_uart: Don't use alloc_bootmem in cpm_uart_cpm2.c powerpc/83xx: Fix PCI IO base address on MPC837xE-RDB boards powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boards powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards powerpc/mm: Fix SMP issue with MMU context handling code
2009-07-30ARM: S3C64XX: serial: Fix section mismatch warningRamax Lo
Rename the structure to avoid the following warning: WARNING: vmlinux.o(.data+0x11ef4): Section mismatch in reference from the variable s3c6400_serial_drv to the function .devexit.text:s3c24xx_serial_remove() The variable s3c6400_serial_drv references the function __devexit s3c24xx_serial_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C24XX: serial: Fix section mismatch warningsRamax Lo
During kernel build process, the following warning was found: WARNING: drivers/serial/built-in.o(.data+0x304): Section mismatch in reference from the variable s3c2440_serial_drv to the function .devexit.text:s3c24xx_serial_remove() The variable s3c2440_serial_drv references the function __devexit s3c24xx_serial_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, The same warning happened for s3c241x platform. We rename variables to avoid these warnings. These changes also apply to s3c2400 & s3c24a0 for consistency. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-29cpm_uart: Don't use alloc_bootmem in cpm_uart_cpm2.cMark Ware
This is another alloc_bootmem() -> kzalloc() change, this time to fix the non-fatal badness caused when booting with a cpm2_uart console. Signed-off-by: Mark Ware <mware@elphinstone.net> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29drivers/serial/atmel_serial.c: fix compile when CONFIG_SERIAL_ATMEL=Y and ↵Albin Tonnerre
CONFIG_SERIAL_ATMEL_CONSOLE=N When SERIAL_ATMEL_CONSOLE is disabled, ATMEL_CONSOLE_DEVICE is set to NULL, and trying to access ATMEL_CONSOLE_DEVICE->flags in atmel_serial_probe makes the compile fail. This fixes the issue by only accessing it if CONFIG_SERIAL_ATMEL_CONSOLE is defined Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29sh: Rework irqflags tracing to fix up CONFIG_PROVE_LOCKING.Stuart Menefy
This cleans up the irqflags tracing code quite a bit and ties it in to various missing callsites that caused an imbalance when CONFIG_PROVE_LOCKING was enabled. Previously this was catching on: 987 #ifdef CONFIG_PROVE_LOCKING 988 DEBUG_LOCKS_WARN_ON(!p->hardirqs_enabled); 989 DEBUG_LOCKS_WARN_ON(!p->softirqs_enabled); 990 #endif 991 retval = -EAGAIN; with hardirqs being doubly enabled, and subsequently bailing out with the following call trace: Call trace: [<88035224>] __lock_acquire+0x616/0x6a6 [<88015a8c>] do_fork+0xf8/0x2b0 [<880331ec>] trace_hardirqs_on_caller+0xd4/0x114 [<88241074>] _spin_unlock_irq+0x20/0x64 [<88035224>] __lock_acquire+0x616/0x6a6 [<8800386c>] kernel_thread+0x48/0x70 [<88024ecc>] ____call_usermodehelper+0x0/0x110 [<88024ecc>] ____call_usermodehelper+0x0/0x110 [<88003894>] kernel_thread_helper+0x0/0x14 [<88024bac>] __call_usermodehelper+0x38/0x70 [<88025dc0>] worker_thread+0x150/0x274 [<88035b9c>] lock_release+0x0/0x198 [<88024b74>] __call_usermodehelper+0x0/0x70 [<88028cf0>] autoremove_wake_function+0x0/0x30 [<88028bf2>] kthread+0x3e/0x70 [<88025c70>] worker_thread+0x0/0x274 [<8800389c>] kernel_thread_helper+0x8/0x14 [<88028bb4>] kthread+0x0/0x70 [<88003894>] kernel_thread_helper+0x0/0x14 Reported-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 08:02:19 +0000