aboutsummaryrefslogtreecommitdiff
path: root/drivers/sh
AgeCommit message (Collapse)Author
2010-02-17sh: Use dummy_irq_chip for INTC redirect vectors.Paul Mundt
Presently there's an ordering issue with the chained handler change which places the set_irq_chip() after set_irq_chained_handler(). This causes a warning to be emitted as the IRQ chip needs to be set first. However, there is the caveat that redirect IRQs can't use the parent IRQ's irq chip as they are just dummy redirects, resulting in intc_enable() blowing up when set_irq_chained_handler() attempts to start up the redirect IRQ. In these cases we can just use dummy_irq_chip directly, as we already extract the parent IRQ and chip from the redirect handler. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-16sh: extend INTC with force_disableMagnus Damm
Extend the shared INTC code with force_disable support to allow keeping mask bits statically disabled. Needed for SDHI support to mask out unsupported interrupt sources. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: fix INTC to use set_irq_chained_handler() for redirectsMagnus Damm
This patch updates the shared INTC code to use set_irq_chained_handler() for intc_redirect_irq(). With this in place request_irq() on a merged irq which has been redirected will now return -EINVAL instead of 0 together with a crash. This thanks to the protection of the IRQ_NOREQUEST flag set for chained interrupt handlers. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09Merge branch 'sh/intc-extension'Paul Mundt
2010-02-09sh: extend INTC with force_enableMagnus Damm
Extend the shared INTC code with force_enable support to allow keeping mask bits statically enabled. Needed by upcoming INTC SDHI patches that mux together a bunch of vectors to a single linux interrupt which is masked by a priority register, but needs individual mask bits constantly enabled. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: extend INTC with struct intc_hw_descMagnus Damm
This patch updates the INTC code by moving all vectors, groups and registers from struct intc_desc to struct intc_hw_desc. The idea is that INTC tables should go from using the macro(s) DECLARE_INTC_DESC..() only to using struct intc_desc with name and hw initialized using the macro INTC_HW_DESC(). This move makes it easy to initialize an extended struct intc_desc in the future. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02sh: Provide create_irq_nr() for dynamic IRQ creation by number.Paul Mundt
This just reworks the existing create_irq_on_node() in to the new create_irq_nr() which is generally exposed. This permits boards that haven't converted over to sparseirq to try and use their existing ranges, rather than having arbitrary vectors assigned to them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: update PFC to allow any enum in MARK listsMagnus Damm
This patch updates the PFC code with some clarifying comments together with a functional change. The change allows function type of GPIO to select any type of enum in their MARK lists. Without this patch only function type of enums are allowed in MARK lists. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-09sh: pfc: Fixup type mismatch in debug printks.Paul Mundt
!!value works out to an int while we were still using %ld, so fix this up and shut gcc up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-09sh: intc: Fixup compile breakage.Paul Mundt
The resume from hibernation patch introduced build failure, fix it up.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-09sh: intc: Fixed resume from hibernationFrancesco VIRLINZI
This patch fixes the resume from hibernation in the intc sysdev device when it manages 'redirect' irq Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: pfc: pr_info() -> pr_debug() cleanups.Paul Mundt
For some reason this was using pr_info() nested under an ifdef DEBUG. While this is appealing in that it circumvents the effort necessary to change ones loglevel, it's not terribly practical. So, convert it over to pr_debug(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines.Paul Mundt
Now that the PFC code is exposed for other architectures, use the common __raw_xxx() routines instead of the ctrl_xxx() ones. This will be needed for ARM-based SH-Mobiles amongst others. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: Break out SuperH PFC codeMagnus Damm
This file breaks out the SuperH PFC code from arch/sh/kernel/gpio.c + arch/sh/include/asm/gpio.h to drivers/sh/pfc.c + include/linux/sh_pfc.h. Similar to the INTC stuff. The non-SuperH specific file location makes it possible to share the code between multiple architectures. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-02sh: intc: Handle legacy IRQ reservation in vector map.Paul Mundt
Different CPUs will have different starting vectors, with varying amounts of reserved or unusable vector space prior to the first slot. This introduces a legacy vector reservation system that inserts itself in between the CPU vector map registration and the platform specific IRQ setup. This works fine in practice as the only new vectors that boards need to establish on their own should be dynamically allocated rather than arbitrarily assigned. As a plus, this also makes all of the converted platforms sparseirq ready. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-02sh: intc: dynamic IRQ support.Paul Mundt
This adds support for dynamic IRQ allocation/deallocation for all parts using the SH-style vectored IRQs. While this is not inherently INTC-specific, the INTC code is the main tie-in for vectored IRQ registration, and is the only place that a full view of the utilized vector map is possible. The implementation is fairly straightforward, implementing a flat IRQ map where each registered vector is reserved, allowing us to scan for holes and dynamically wire up IRQs lazily later on in the boot stage. This piggybacks on top of sparseirq in order to make the best use of the available vector space. Dynamic IRQs can be used for any number of things, ranging from MSI in the SH-X3 PCIe case down to demux vectors for board FPGAs and system controllers that presently allocate an arbitrary range. In the latter case, this also allows those platforms to use sparseirq without blowing up, which brings us one step closer to enabling sparseirq as the default for all platform and CPU combinations. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27sh: intc: Make ack_regs generally available.Paul Mundt
Currently this is ifdef'ed under SH-3 and SH-4A, but there are other CPUs that will need this as well. Given the size of the existing data structures, this doesn't cause any additional cacheline utilization for the existing users, so has no direct impact on the data structures. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13sh: maple: PHYSADDR() -> virt_to_phys() conversion.Paul Mundt
Maple's abuse of PHYSADDR() likewise can be converted to virt_to_phys() for its cases, although in practice this really wants explicit remapping. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-31sh: Fix up simplified multi-evt handling under sparseirq.Paul Mundt
This fixes up the simplified multi-evt handling when sparseirq support is enabled. While vectors are redirected through the single unique masking source, each one of the redirected vectors still requires its own backing irq_desc, which needs to be manually allocated in the sparseirq case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Simplify "multi-evt" interrupt handling.Pawel Moll
This patch changes the way in which "multi-evt" interrups are handled. The intc_evt2irq_table and related intc_evt2irq() have been removed and the "redirecting" handler is installed for the coupled interrupts. Thanks to that the do_IRQ() function don't have to use another level of indirection for all the interrupts... Signed-off-by: Pawel Moll <pawel.moll@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Fixes some write posting issues in the interrupt handling for SHStuart Menefy
It is possible for the CPU to re-enable it's interrupt block bit before the write to the interrupt controller has actually masked out the external interupt at the controller. We get around this by reading back from the interrupt controller which will ensure the write has happened. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-12sh: intc: alloc_bootmem() -> kzalloc() conversion.Paul Mundt
Now that the slab allocators are available much earlier, this triggers a the slab_is_available() warning when registering the interrupt controller. Convert to kzalloc() with GFP_NOWAIT, as per the generic changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: Tie sparseirq in to Kconfig.Paul Mundt
Now that the dependent patches are merged, we are ready to enable sparseirq support. This simply adds the Kconfig option, and then converts from the _cpu to the _node allocation routines to follow the upstream sparseirq API changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: Wrap irq_to_desc_alloc_cpu() around CONFIG_SPARSE_IRQ temporarily.Paul Mundt
irq_to_desc_alloc_cpu() has been renamed to irq_to_desc_alloc_node() in -next, but as we can not presently enable SPARSE_IRQ without the early irq_desc alloc patch, protect it with an ifdef until the interface has settled and we are ready to enable it system-wide. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: irq: Teach ipr and intc about dynamically allocating irq_descs.Paul Mundt
This hooks in irq_to_desc_alloc_cpu() to the necessary code paths in the intc and ipr controller registration paths. As these are the primary call paths for all SH CPUs, this alone will make all CPUs sparse IRQ ready. There is the added benefit now that each CPU contains specific IPR and INTC tables, so only the vectors with interrupt sources backing them will ever see an irq_desc instantiation. This effectively packs irq_desc down to match the CPU, rather than padding NR_IRQS out to cover the valid vector range. Boards with extra sources will still have to fiddle with the nr_irqs setting, but they can continue doing so through the machvec as before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-06sh: intc: Added resume from hibernation support to the intcFrancesco VIRLINZI
It's required for all modules loaded in the previous runtime session because not initilized duing the kernel start-up. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02sh: intc: set_irq_wake() supportMagnus Damm
Add set_irq_wake() support to intc using sysdev and suspend. The intc controllers are put on a list at registration time and registered as sysdev devices later on during the boot. The sysdev class suspend callback is used to find irqs with wakeup enabled belonging to our intc controller. Such irqs are simply enabled so wakeup interrupts may reach the cpu. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02sh: intc: install enable, disable and shutdown callbacksMagnus Damm
Modify the intc code to install a disable callback. The current solution without a disable callback results in use of the generic default_disable() function. This function is a no-op so suspend_device_irqs() will not disable any intc interrupts at suspend time without this patch. Also, install enable and shutdown callbacks while at it. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-29maple: fix Error in kernel-doc notationRandy Dunlap
Fix kernel-doc error in maple (it's not kernel-doc): Error(drivers/sh/maple/maple.c:782): cannot understand prototype: 'struct bus_type maple_bus_type = ' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits) Dynamic debug: fix pr_fmt() build error Dynamic debug: allow simple quoting of words dynamic debug: update docs dynamic debug: combine dprintk and dynamic printk sysfs: fix some bin_vm_ops errors kobject: don't block for each kobject_uevent sysfs: only allow one scheduled removal callback per kobj Driver core: Fix device_move() vs. dpm list ordering, v2 Driver core: some cleanup on drivers/base/sys.c Driver core: implement uevent suppress in kobject vcs: hook sysfs devices into object lifetime instead of "binding" driver core: fix passing platform_data driver core: move platform_data into platform_device sysfs: don't block indefinitely for unmapped files. driver core: move knode_bus into private structure driver core: move knode_driver into private structure driver core: move klist_children into private structure driver core: create a private portion of struct device driver core: remove polling for driver_probe_done(v5) sysfs: reference sysfs_dirent from sysfs inodes ... Fixed conflicts in drivers/sh/maple/maple.c manually
2009-03-24sh: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-06sh: intc: Make missing unique IRQ mask warning more verbose.Paul Mundt
This includes the IRQ number in addition to the vector, as not all platforms wrap in with INTC_VECT(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03sh: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: multiple vectors per irq - baseMagnus Damm
Instead of keeping the single vector -> single linux irq mapping we extend the intc code to support merging of vectors to a single linux irq. This helps processors such as sh7750, sh7780 and sh7785 which have more vectors than masking ability. With this patch in place we can modify the intc tables to use one irq per maskable irq source. Please note the following: - If multiple vectors share the same enum then only the first vector will be available as a linux irq. - Drivers may need to be rewritten to get pending irq source from the hardware block instead of irq number. This patch together with the sh7785 specific intc tables solves DMA controller irq issues related to buggy interrupt masking. Reported-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: maple: Support block reads and writes.Adrian McMenamin
This patch updates the maple bus to support asynchronous block reads and writes as well as generally improving the quality of the code and supporting concurrency (all needed to support the Dreamcast visual memory unit - a driver will also be posted for that). Changes in the bus driver necessitate some changes in the two maple bus input drivers that are currently in mainline. As well as supporting block reads and writes this code clean up removes some poor handling of locks, uses an atomic status variable to serialise access to devices and more robusly handles the general performance problems of the bus. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-16sh: maple: Do not pass SLAB_POISON to kmem_cache_create()Matt Fleming
SLAB_POISON is not a valid flag for kmem_create_cache() unless CONFIG_DEBUG_SLAB is set, so remove it from the flags argument. Acked-by: Adrian McMenamin <adrian@newgolddream.dyndns.info> Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01sh: Move the shared INTC code out to drivers/sh/Paul Mundt
The INTC code will be re-used across different architectures, so move this out to drivers/sh/ and include/linux/sh_intc.h respectively. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: Fix up broken kerneldoc comments.Paul Mundt
These were completely unparseable, so fix them up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04maple: Kill useless private_data pointer.Paul Mundt
We can simply wrap in to the dev_set/get_drvdata(), there's no reason to track an extra level of private data on top of the struct device. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04maple: Clean up maple_driver_register/unregister routines.Paul Mundt
These were completely inconsistent. Clean these up to take a maple_driver pointer directly for consistency. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh/maple: clean maple bus codeAdrian McMenamin
This patch cleans up the handling of the maple bus queue to remove the risk of races when adding packets. It also removes references to the redundant connect and disconnect functions. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26maple: fix device detectionAdrian McMenamin
The maple bus driver that went into the kernel mainline in September 2007 contained some bugs which were revealed by the update of the kobj code for the current release series. Unfortunately those bugs also helped ensure maple devices were properly detected. This patch (against the current git) now ensures that devices are properly detected again. (A previous attempt to fix this by delaying initialisation only partially fixed this - as became apparent when the bus was fully loaded) Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14maple: improve detection of attached peripheralsAdrian McMenamin
Improve device detection for maple through longer delay Experience suggests that a much longer delay in setting up the Maple bus on the Dreamcast leads to better hardware detection. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14maple: more robust device detection.Adrian McMenamin
Replacement second-in-series patch: This patch fixes up memory leaks and, by delaying initialisation, makes device detection more robust. It also makes clearer the difference between struct maple_device and struct device, as well as cleaning up the interrupt request code (without changing its function in any way). Also now removes redundant registration checking. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14maple: fix up whitespace damage.Adrian McMenamin
This patch is fundamentally about fixing up the whitespace problems introduced by my previous patch (that brought the code into mainline). A second patch will follow that will fix memory leaks. The two need to be applied sequentially. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07superhyway: Handle device_register() retval properly.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-30maple: Fix maple bus compiler warningAdrian McMenamin
The uevent API has changed from 2.6.22 and this patch eliminates annoying compiler errors Signed off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Add maple bus support for the SEGA Dreamcast.Adrian McMenamin
The Maple bus is SEGA's proprietary serial bus for peripherals (keyboard, mouse, controller etc). The bus is capable of some (limited) hotplugging and operates at up to 2 M/bits. Drivers of one sort or another existed/exist for 2.4 and a rudimentary port, which didn't support the 2.6 device driver model was also in existence. This driver - for the bus logic itself and for the keyboard (other drivers will follow) are based on the code and concepts of those old drivers but have lots of completely rewritten parts. I have the maple bus code as a built in now as that seems the sane and rational way to handle something like that - you either want the bus or you don't. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-01-13[PATCH] Add superhyway_bus_type probe and remove methodsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>