aboutsummaryrefslogtreecommitdiff
path: root/drivers/ssb
AgeCommit message (Collapse)Author
2009-07-08ssb: Add support for 4318EClyde McPherson
Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The 4318E can do 802.11A/B/G, only B and G mode are supported in b43. Signed-off-by: Clyde McPherson <ccmcphe@verizon.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-08SSB: BCM47xx: Export ssb_watchdog_timer_setMatthieu Castet
this patch export ssb_watchdog_timer_set to allow to use it in a Linux watchdog driver. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by : Michael Buesch <mb@bu3sch.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-27b43: Add BCM4307 PCI-IDMichael Buesch
00:09.0 Network controller [0280]: Broadcom Corporation BCM4307 Ethernet Controller [14e4:4306] (rev 03) Subsystem: Broadcom Corporation BCM4307 Ethernet Controller [14e4:4306] Flags: bus master, fast devsel, latency 32, IRQ 10 Memory at d7000000 (32-bit, non-prefetchable) [size=8K] Kernel driver in use: b43-pci-bridge Kernel modules: ssb Reported-by: yoann <yoann71@msn.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ssb: remove EXPERIMENTAL dependencies.Michael Buesch
ssb is not experimental anymore. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ssb: Add SPROM fallback supportMichael Buesch
This adds SSB functionality to register a fallback SPROM image from the architecture setup code. Weird architectures exist that have half-assed SSB devices without SPROM attached to their PCI busses. The architecture can register a fallback SPROM image that is used if no SPROM is found on the SSB device. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ssb: Add PMU supportMichael Buesch
This adds support for the SSB PMU. A PMU is found on Low-Power devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43/ssb: Add SPROM8 extraction and LP-PHY detectionMichael Buesch
This adds detection code for the LP-PHY and SPROM extraction code for version 8, which is needed by the LP-PHY and newer N-PHY. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ssb/b43: add new N PHY deviceJohannes Berg
This is used on my macbook. N PHY, obviously nothing works yet, but we can detect the chip with this patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21ssb: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. CC: Michael Buesch <mb@bu3sch.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10SSB: hide empty sub menuMike Frysinger
If the target system cannot support SSB, then don't show the menu option as it'll simply be an empty submenu. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: ioctl-internal definitions pcmcia: cistpl header cleanup pcmcia: remove unused argument to pcmcia_parse_tuple() pcmcia: card services header cleanup pcmcia: device_id header cleanup pcmcia: encapsulate ioaddr_t pcmcia: cleanup device driver header file pcmcia: cleanup socket services header file pcmcia: merge ds_internal.h into cs_internal.h pcmcia: cleanup cs_internal.h pcmcia: cs_internal.h is internal pcmcia: use dev_printk for cs_error() pcmcia: remove CS_ error codes alltogether pcmcia: deprecate CS_BAD_TUPLE pcmcia: deprecate CS_BAD_ARGS pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE pcmcia: deprecate CS_NO_MORE_ITEMS pcmcia: deprecate CS_IN_USE pcmcia: deprecate CS_CONFIGURATION_LOCKED ... Fix trivial conflict in drivers/pcmcia/ds.c manually
2008-10-01Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath9k/core.c drivers/net/wireless/ath9k/main.c net/core/dev.c
2008-09-27[SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devicesAurelien Jarno
For SSB_BUSTYPE_SSB type devices, we need to initialize dma_mask using coherent_dma_mask so that calls to dma_set_mask() succeed. It fixes the regression on the b44 driver introduced by commit f225763a7d6c92c4932dbd528437997078496fcc Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-08-29ssb: Clean up extraction of MAC addresses from SPROMLarry Finger
Only rev 1 and 2 ssb SPROMs have fields named et0mac and et1mac; however, all of the extraction routines extract pseudo data for these fields from regions that are all 1's resulting in a hardware address of FF:FF:FF:FF:FF:FF. This patch forces such a fill at the beginning of the data extraction process, and only does the formal extraction if the SPROM rev is 1 or 2. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ssb: Update for Rev. 5 SPROMLarry Finger
Although a revision 5 SPROM has not been seen in the wild, the open-source portion of the MIPS driver 4.150.10.5 describes its layout, which is mostly inherited from revision 4. This patch implements the differences. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-23pcmcia: deprecate CS_NO_MORE_ITEMSDominik Brodowski
CS_NO_MORE_ITEMS is returned by the CIS tuple reading and parsing code if the end of a tuple chain is reached. As at least one PCMCIA driver relies on matching this return value, replace it with -ENOSPC which is now uniquely used for this purpose within the in-kernel pcmcia subsystem. CC: Russell King <rmk+kernel@arm.linux.org.uk> CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_SUCCESSDominik Brodowski
Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-18ssb: allow compilation on systems without PCIHolger Schurig
Makes ssb work on system without a PCI bus. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.c net/mac80211/mlme.c
2008-07-07ssb-pcicore: Fix IRQ-vector init on embedded devicesMichael Buesch
On embedded devices we must not route the interrupts through the PCI core, if our host-bus is not PCI. Reported-by: Steve Brown <sbrown@cortland.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27ssb, b43, b43legacy, b44: Rewrite SSB DMA APIMichael Buesch
This is a rewrite of the DMA API for SSB devices. This is needed, because the old (non-existing) "API" made too many bad assumptions on the API of the host-bus (PCI). This introduces an almost complete SSB-DMA-API that maps to the lowlevel bus-API based on the bustype. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/rt2x00/Kconfig drivers/net/wireless/rt2x00/rt2x00usb.c net/sctp/protocol.c
2008-06-13ssb: Fix coherent DMA mask for PCI devicesMichael Buesch
This fixes setting the coherent DMA mask for PCI devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-10Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/tg3.c drivers/net/wireless/rt2x00/rt2x00dev.c net/mac80211/ieee80211_i.h
2008-06-04ssb: Fix context assertion in ssb_pcicore_dev_irqvecs_enableMichael Buesch
This fixes a context assertion in ssb that makes b44 print out warnings on resume. This fixes the following kernel oops: http://www.kerneloops.org/oops.php?number=12732 http://www.kerneloops.org/oops.php?number=11410 Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-07ssb: Allow reading of 440-byte SPROM that is not rev 4Larry.Finger@lwfinger.net
The current code checks for the special signature that signifies a revision 4 SPROM. Now that a rev. 8 SPROM with a 440-byte length has been found that may not have any special code, this check could be relaxed. With this patch, if the CRC is incorrect for a 256-byte SPROM, the code will immediately check for a 440-byte SPROM. If there is still a CRC error, the size is set to 440 bytes, which allows dumping of most of any 512-byte SPROM if one is encountered. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-23ssb: Fix all-ones boardflagsLarry Finger
In the SSB SPROM a field set to all ones means the value is not defined in the SPROM. In case of the boardflags, we need to set them to zero to avoid confusing drivers. Drivers will only check the flags by ANDing. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Gabor Stefanik <netrolller.3d@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-04-16ssb-pcicore: Remove b44 TPS flag workaroundMichael Buesch
Now that we fixed the TPS flag assignment in commit b63009b456c8d9abe684bdf8d4bd8f27eb040019 we don't need the workaround for the bcm44xx chip anymore. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-15ssb: Fix usage of struct device used for DMAingMichael Buesch
This fixes DMA on architectures where DMA is nontrivial, like PPC64. We must use the host-device's (PCI) struct device for any DMA operation instead of the SSB device. For this we add a new struct device pointer to the SSB device structure that will always point to the right device for DMAing. Without this patch b43 and b44 drivers won't work on complex-DMA architectures, that for example need dev->archdata for DMA operations. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ehea/ehea_main.c drivers/net/wireless/iwlwifi/Kconfig drivers/net/wireless/rt2x00/rt61pci.c net/ipv4/inet_timewait_sock.c net/ipv6/raw.c net/mac80211/ieee80211_sta.c
2008-04-09ssb-mipscore: Fix interrupt vectorsMichael Buesch
This fixes assignment of the interrupt vectors on the SSB MIPS core. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-09ssb-pcicore: Fix IRQ TPS flag handlingLarry Finger
This fixes the TPS flag handling for the SSB pcicore driver. This fixes interrupts on some devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08ssb: Add support for block-I/OMichael Buesch
This adds support for block based I/O to SSB. This is needed in order to efficiently support PIO data transfers to the card. The block-I/O support is only compiled, if it's selected by the weird driver that needs it. So there's no overhead for sane devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08ssb: Fix build for non-PCIhostMichael Buesch
This fixes a build error when PCMCIA-host support is built, but PCI-host support is disabled. Hell, who on earth would use such a weird configuration. :D drivers/built-in.o: In function `ssb_attr_sprom_store': (.text+0x1c4b79): undefined reference to `ssb_devices_freeze' drivers/built-in.o: In function `ssb_attr_sprom_store': (.text+0x1c4bb3): undefined reference to `ssb_devices_thaw' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08ssb: Turn suspend/resume upside downMichael Buesch
Turn the SSB bus suspend mechanism upside down. Instead of deciding by an internal reference count when to suspend/resume, let the parent bus call us in their suspend/resume routine. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08ssb-pcmcia: IRQ and DMA related fixesMichael Buesch
Here come some IRQ and DMA related fixes for the ssb PCMCIA-host code. Not much to say, actually. I think the patch explains itself. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07b43legacy: fix bcm4303 crashStefano Brivio
This fixes an hard crash which happened upon driver loading on bcm4303 rev. 2 devices. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13ssb: Add SPROM/invariants support for PCMCIA devicesMichael Buesch
This adds support for reading/writing the SPROM invariants for PCMCIA based devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06ssb: Add Gigabit Ethernet driverMichael Buesch
This adds the Gigabit Ethernet driver for the SSB Gigabit Ethernet core. This driver actually is a frontend to the Tigon3 driver. So the real work is done by tg3. This device is used in the Linksys WRT350N. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/rc80211_pid_algo.c
2008-03-04ssb: Add pcibios_enable_device() return value checkYoichi Yuasa
This patch has added pcibios_enable_device() return value check. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ssb: Add CHIPCO IRQ access functionsAurelien Jarno
This patch adds functions to setup and read the CHIPCO IRQ. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29ssb: Add support for 8bit register accessMichael Buesch
This adds support for 8bit wide register reads/writes. This is needed in order to support the gigabit ethernet core. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28SSB PCI core driver: use new SPROM data structureAurelien Jarno
Switch the SSB PCI core driver to the new SPROM data structure now that the old one has been removed. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28Use a separate config option for the b43 pci to ssb bridge.Alexey Zaytsev
The bridge code was unnecessary enabled by the b44 driver, but it prevents the bcm43xx driver from being loaded, as the bridge claims the same pci ids. Now we enable the birdge only if the b43{legacy} drivers are selected. Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20ssb: Fix support for PCI devices behind a SSB->PCI bridgeMichael Buesch
We must pin all resources and make sure the PCI subsystem won't relocate us, as the addresses are hardwired into hardware. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20ssb: Fix pcicore cardbus modeMichael Buesch
This fixes the pcicore driver to not die a horrible crash death when inserting a cardbus card. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20ssb: Make the GPIO API reentrancy safeMichael Buesch
This fixes the GPIO API to be reentrancy safe. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20ssb: Fix the GPIO APIMichael Buesch
This fixes the GPIO API to be usable. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>