aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/class
AgeCommit message (Collapse)Author
2009-12-11USB: usbtmc: Use usb_clear_halt() instead of custom code.Sarah Sharp
Make the USB Test & Measurement driver use usb_clear_halt() instead of usb_control_msg() to clear a stalled endpoint. This will allow devices to be tested under an xHCI host controller. The endpoint stall will not be cleared in the internal xHCI hardware state unless usb_clear_halt() is used. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Steve Holland <sdh4@iastate.edu> Cc: Oliver Neukum <oliver@neukum.org> Cc: Jouni Ryno <Jouni.Ryno@fmi.fi> Cc: Gergely Imreh <imrehg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB: usbtmc: repeat usb_bulk_msg until whole message is transferedAndre Herms
usb_bulk_msg() transfers only bytes up to the maximum packet size. It must be repeated by the usbtmc driver until all bytes of a TMC message are transfered. Without this patch, ETIMEDOUT is reported when writing TMC messages larger than the maximum USB bulk size and the transfer remains incomplete. The user will notice that the device hangs and must be reset by either closing the application or pulling the plug. Signed-off-by: Andre Herms <andre.herms@tec-venture.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB: Exposing second ACM channel as tty for Nokia S60 phones.Adrian Taylor
Nokia S60 phones expose two ACM channels. The first is a modem and is picked up by the standard AT-command interface information in the CDC-ACM driver. The second is marked as having a vendor-specific protocol. Normally, we don't expose those as ttys. (On some other devices, they may be claimed by the rndis_host driver and used as a network interface). But on S60 this second ACM channel is the way that third-party S60 application developers are expected to communicate over USB. It acts as a serial device at the S60 end, and so it should on Linux too. The list of devices is largely derived from: http://wiki.forum.nokia.com/index.php/S60_Platform_and_device_identification_codes http://wiki.forum.nokia.com/index.php/Nokia_USB_Product_IDs and includes only the S60 3rd Edition+ devices documented there. There are many devices for which the USB device ID is not documented, including: Nokia 6290 Nokia E63 Nokia 5630 XpressMusic Nokia 5730 XpressMusic Nokia 6710 Navigator Nokia 6720 classic Nokia 6730 Classic Nokia 6760 slide Nokia 6790 slide Nokia 6790 Surge Nokia E52 Nokia E55 Nokia E71x (AT&T) Nokia E72 Nokia E75 Nokia E75 US+LTA variant Nokia N79 Nokia N86 8MP Nokia 5230 (RM-588) Nokia 5230 (RM-594) Nokia 5530 XpressMusic Nokia 5530 XpressMusic (china) Nokia 5800 XM Nokia N97 (RM-506) Nokia N97 mini Nokia X6 It would be good to add those subsequently. Signed-off-by: Adrian Taylor <aat@realvnc.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB: usbtmc: minor formatting cleanupsOliver Neukum
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-07Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: kernel/irq/chip.c
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-17USB: cdc_acm: Fix memory leak after hangupFrancesco Lavra
Am Donnerstag, 10. September 2009 15:43:53 schrieb Dietmar Hilbrich: > Hello, > > i have the following problem with the cdc-acm - driver: > > I'm using the driver with an "Ericsson F3507G" on a Thinkpad T400. > > If a disable the device (with the RFKill-Switch) while it is used by a > programm like ppp, the driver doesn't seem to correctly clean up the tty, > even after the program has been closed) > > The tty is still active (e.g. there still exists an entry in > /sys/dev/char/166:0 if ttyACM0 was used) and if a reacticate the device, > this device entry will be skipped and the Device-Nodes ttyACM1, ttyACM2 > and ttyACM3 will be used. > > This problem was introduced with the commit > 10077d4a6674f535abdbe25cdecb1202af7948f1 (before 2.6.31-rc1) and still > exists in 2.6.31. > > I was able the fix this problem with the following patch: > > diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c > index 2bfc41e..0970d2f 100644 > --- a/drivers/usb/class/cdc-acm.c > +++ b/drivers/usb/class/cdc-acm.c > @@ -676,6 +676,7 @@ static void acm_tty_hangup(struct tty_struct *tty) > struct acm *acm = tty->driver_data; > tty_port_hangup(&acm->port); > acm_port_down(acm, 0); > + acm_tty_unregister(acm); > } I have the same problem with cdc-acm (I'm using a Samsung SGH-U900): when I unplug it from the USB port during a PPP connection, the ppp daemon gets the hangup correctly (and closes the device), but the struct acm corresponding to the device disconnected is not freed. Hence reconnecting the device results in creation of /dev/ttyACM(x+1). The same happens when the system is hibernated during a PPP connection. This memory leak is due to the fact that when the tty is hung up, tty_port_close_start() returns always zero, and acm_tty_close() never reaches the point where acm_tty_unregister() is called. Here is a fix for this. Signed-off-by: Francesco Lavra <francescolavra@interfree.it> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17USB: cdc_acm: Fix race condition when opening ttyHenry Gebhardt
If acm_rx_tasklet() gets called before tty_port_block_til_ready() returns, then bulk IN urbs may not be sent. This fixes it. Signed-off-by: Henry Gebhardt <gebhardt@astro.uni-tuebingen.de> Acked-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: usbtmc: fix timeout increaseGergely Imreh
The current 10ms timeout is too short for some normal USBTMC device operation, increase it to a value which was tested with previously affected Tektronix oscilloscopes. Signed-off-by: Gergely Imreh <imrehg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-01const: constify remaining file_operationsAlexey Dobriyan
[akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23USB: fix USBTMC get_capabilities success handlingGergely Imreh
In order: Add reference to relevant section of USBTMC usb488 subclass specs. Print debug output of capabilities only when it was retrieved successfully. Clear return value on success, otherwise driver always reports failure. Signed-off-by: Gergely Imreh <imrehg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: usbtmc: correct termination condition for reads.Steve Holland
Follow T&M convention of obeying EOM flag. Avoid exception cases where instrument response size matches a buffer size. Signed-off-by: Steve Holland <sdh4@iastate.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: usbtmc: inhibit corruptionSteve Holland
Limit data copied to userspace to amount requested. Prevents a faulty instrument from overwriting user memory. Signed-off-by: Steve Holland <sdh4@iastate.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: usbtmc: Fix short reads in usbtmc_read()Steve Holland
The header size should not be included in the number of bytes requested of the instrument Signed-off-by: Steve Holland <sdh4@iastate.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: usbtmc: fix printk format warningsRandy Dunlap
Fix printk format warnings: drivers/usb/class/usbtmc.c:466: warning: format '%zu' expects type 'size_t', but argument 4 has type 'u32' drivers/usb/class/usbtmc.c:466: warning: format '%zu' expects type 'size_t', but argument 5 has type 'int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: usbtmc: sanity checks for DEV_DEP_MSG_IN urbsGuus Sliepen
According to the specifications, an instrument should not return more data in a DEV_DEP_MSG_IN urb than requested. However, some instruments can send more than requested. This could cause the kernel to write the extra data past the end of the buffer provided by read(). Fix this by checking that the value of the TranserSize field is not larger than the urb itself and not larger than the size of the userspace buffer. Also correctly decrement the remaining size of the buffer when userspace read()s more than USBTMC_SIZE_IOBUFFER. Signed-off-by: Guus Sliepen <guus@sliepen.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: suspend/resume support for usbtmcOliver Neukum
a class driver should have suspend/resume. This makes sure we don't see a virtual disconnect unnecessarily. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: usbtmc can do IO to device after disconnectOliver Neukum
usbtmc will happily complete read/write requests even after disconnect has returned. The fix is to introduce a flag. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: fix cdc-acm regression in openOliver Neukum
cdc-acm needs to set a flag during open to tell the tty layer that the device is initialized Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Paul Martin <pm@debian.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: CDC WDM driver doesn't support non-blocking readsOliver Neukum
support for O_NONBLOCK in read and write path by simply not waiting for data in read or availability of the write urb in write but returning -EAGAIN Signed-off-by: Oliver Neukum <oliver@neukum.org> Tested-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-21trivial: remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Driver-Core: extend devnode callbacks to provide permissions
2009-09-19cdc_acm: Fix to use modern speed interfacesAlan Cox
This changed in 2006 so its about time the ACM driver caught up Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19Driver-Core: extend devnode callbacks to provide permissionsKay Sievers
This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07USB: fix oops on disconnect in cdc-acmOliver Neukum
This patch fixes an oops caused when during an unplug a device's table of endpoints is zeroed before the driver is notified. A pointer to the endpoint must be cached. this fixes a regression caused by commit 5186ffee2320942c3dc9745f7930e0eb15329ca6 Therefore it should go into 2.6.31 Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-20tty: fix chars_in_buffersAlan Cox
This function does not have an error return and returning an error is instead interpreted as having a lot of pending bytes. Reported by Jeff Harris who provided a list of some of the remaining offenders. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits) USB: otg: fix module reinsert issue USB: handle zero-length usbfs submissions correctly USB: EHCI: report actual_length for iso transfers USB: option: remove unnecessary and erroneous code USB: cypress_m8: remove invalid Clear-Halt USB: musb_host: undo incorrect change in musb_advance_schedule() USB: fix LANGID=0 regression USB: serial: sierra driver id_table additions USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. USB: fix race leading to a write after kfree in usbfs USB: Sierra: fix oops upon device close USB: option.c: add A-Link 3GU device id USB: Serial: Add support for Arkham Technology adapters USB: Fix option_ms regression in 2.6.31-rc2 USB: gadget audio: select SND_PCM USB: ftdi: support NDI devices Revert USB: usbfs: deprecate and hide option for !embedded USB: usb.h: fix kernel-doc notation USB: RNDIS gadget, fix issues talking from PXA USB: serial: FTDI with product code FB80 and vendor id 0403 ...
2009-07-12USB: cdc-acm: work around some broken devicesArseniy Lartsev
This patch introduces a work around for cdc-acm devices which are low speed contrary to the specification, which requires bulk endpoints which are banned in low speed and converted by usbcore to virtual interrupt endpoints if they are used nevertheless. Signed-off-by: Arseniy Lartsev <ars3n@yandex.ru> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12USB: fix memory leak in usbtmcOliver Neukum
If an error is returned kfree must also be called. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-25acm: Fix oops when closing ACM tty device right after open has failed.Thadeu Lima de Souza Cascardo
This commit 10077d4a6674f535abdbe25cdecb1202af7948f1 has stopped checking if there was a valid acm device associated to the tty, which is not true right after open fails and tty subsystem tries to close the device. As an example, open fails with a non-existing device, when probe has never been called, because the device has never been plugged. This is common in systems with static modules and no udev. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-25acm: Return ENODEV instead of EINVAL when trying to open ACM device.Thadeu Lima de Souza Cascardo
This is required, otherwise a user will get a EINVAL while opening a non-existing device, instead of ENODEV. This is what I get with this patch applied now instead of an "Invalid argument". cascardo@vespa:~$ cat /dev/ttyACM0 cat: /dev/ttyACM0: No such device cascardo@vespa:~$ Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (143 commits) USB: xhci depends on PCI. USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries. USB: xhci: Respect critical sections. USB: xHCI: Fix interrupt moderation. USB: xhci: Remove packed attribute from structures. usb; xhci: Fix TRB offset calculations. USB: xhci: replace if-elseif-else with switch-case USB: xhci: Make xhci-mem.c include linux/dmapool.h USB: xhci: drop spinlock in xhci_urb_enqueue() error path. USB: Change names of SuperSpeed ep companion descriptor structs. USB: xhci: Avoid compiler reordering in Link TRB giveback. USB: xhci: Clean up xhci_irq() function. USB: xhci: Avoid global namespace pollution. USB: xhci: Fix Link TRB handoff bit twiddling. USB: xhci: Fix register write order. USB: xhci: fix some compiler warnings in xhci.h USB: xhci: fix lots of compiler warnings. USB: xhci: use xhci_handle_event instead of handle_event USB: xhci: URB cancellation support. USB: xhci: Scatter gather list support for bulk transfers. ...
2009-06-15USB: usbtmc: fix switch statmentGreg Kroah-Hartman
Steve Holland pointed out that we forgot to call break; in the switch statment. This probably resolves a lot of the bug reports I've gotten for the driver lately. Stupid me... Reported-by: Steve Holland <sdh4@iastate.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: cdc-acm: quirk for Alcatel OT-I650Kir Kolyshkin
This mobile phone fails to work as a modem, failing with: cdc_acm: Zero length descriptor references cdc_acm: probe of 1-6.1.3:1.1 failed with error -22 Tested to work fine with this patch. Signed-off-by: Kir Kolyshkin <kir@openvz.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: support for cdc-acm of single interface devicesOliver Neukum
This implement support in cdc-acm for acm devices another popular OS can handle - adds support for autodetection of devices that use one interface - autodetection of endpoints - add a quirk for surpressing a setting that OS doesn't use - autoassume that quirk for single interface devices Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15Driver Core: usb: add nodename support for usb drivers.Kay Sievers
This adds support for USB drivers to report their requested nodename to userspace. It also updates a number of USB drivers to provide the needed subdirectory and device name to be used for them. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-11tty: Clean up the ACM driver to CodingStyleAlan Cox
Or at least most of it. There are further clean ups possible and there are are also thing checkpatch moans about that would be silly to "fix". Also note some FIXME points found as the cleanup was done. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: cdc_acm add krefsAlan Cox
Now we have a port structure begin using the fields and kref counts Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: Update cdc_acmAlan Cox
The CDC ACM driver uses the tty layer correctly so needs conversion. Start by adding and initializing the port structures. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-28USB: Yet another Conexant Clone to add to cdc-acm.cXiao Kaijian
This patch adds another quirky Conexant USB Modem Clone to usb cdc-acm.c Signed-off-by: Xiao Kaijian <xiaokj@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-23USB: correct error handling in cdc-wdmOliver Neukum
This patch to cdc-wdm - checks for partial extra descriptors - fixes a leak in the error case of probe - checks for an exact number of endpoints - adds a clarifying comment Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17USB: fix oops in cdc-wdm in case of malformed descriptorsOliver Neukum
cdc-wdm needs to ignore extremely malformed descriptors. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-14cdc-acm: Fix long standing abuse of tty->low_latencyAlan Cox
ACM sets the low latency flag but calls the flip buffer routines from IRQ context which isn't permitted (and as of 2.6.29 causes a warning hence this one was caught) Fortunatelt ACM doesn't need to set this flag in the first place as it only set it to work around problems in ancient (pre tty flip rewrite) kernels. Reported-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06cdc-acm: zydas 1602 identifier neededAlan Cox
Bugzilla #9095 and a couple of other confirmations Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06usb: Auto-load cdc_acm module when device opened.Scott James Remnant
The cdc_acm module is missing the char-major-166-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-24usblp: continuously poll for statusPete Zaitcev
The usblp in 2.6.18 polled for status regardless if we actually needed it. At some point I dropped it, to save the batteries if nothing else. As it turned out, printers exist (e.g. Canon BJC-3000) that need prodding this way or else they stop. This patch restores the old behaviour. If you want to save battery, don't leave jobs in the print queue. I tested this on my printers by printing and examining usbmon traces to make sure status is being requested and printers continue to print. Tuomas Jäntti verified the fix on BJC-3000. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: usbtmc: add protocol 1 supportGreg Kroah-Hartman
The driver already supports the 1 protocol support, so just add it to the MODULE_DEVICE_TABLE entry so it properly picks up these devices. Thanks to Jouni Rynö for pointing this out. Reported-by: Jouni Ryno <Jouni.Ryno@fmi.fi> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: usbtmc: fix stupid bug in open()Greg Kroah-Hartman
open() will never succeed, as we always return -ENODEV. Fix this obvious bug. Thanks to Jouni Ryno for reporting it. Reported-by: Jouni Ryno <Jouni.Ryno@fmi.fi> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-27USB: Quirk for Hummingbird huc56s / Conexant ACM modemAdam Richter
Signed-off-by: Adam J. Richter <adam_richter2004@yahoo.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>