aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/class
AgeCommit message (Collapse)Author
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12usblp: Fix a double kfreePete Zaitcev
If submit fails, slab hits a BUG() because of a double kfree. The today's lesson is, you cannot just slap USB_FREE_BUFFER on code without adjusting the error paths. The patch is made bigger by opportunistic refactoring. Signed-Off-By: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12usblp: CosmeticsPete Zaitcev
This is a small bunch of cosmetic fixes: - Timeout is not a write timeout anymore, rename - Condition in poll was confusingly backwards, invert and simplify - The comment log gave a wrong impression of version 0.13, terminate it. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12usblp: mutex in usblp_check_statusPete Zaitcev
Add a mutex to protect the ->statusbuf. Not really an issue, because CUPS is single-threaded when it talks to the printer, but I feel safer this way. This should be deadlock-free, but I kept this as a separate patch in case someone ends running a git bisect. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12usblp: Make use of URB_FREE_BUFFERPete Zaitcev
Employ the new API URB_FREE_BUFFER that we've got. There was talk of a combined constructor for this case, but apparently it's not happening, so just set the flag explicitly for now. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12usblp: Implement the ENOSPC conventionPete Zaitcev
This patch implements a mode when a printer returns ENOSPC when it runs out of paper. The default remains the same as before. An application which wishes to use this function has to enable it explicitly with an ioctl LPABORT. This is done on a request by our (Fedora) CUPS guy, Tim Waugh. The API is similar enough to the lp0's one that CUPS works with both (but see below), but it's has some differences. Most importantly, the abort mode is persistent in case of lp0: once tunelp was run your cat fill blow up until you reboot or run tunelp again. For usblp, I made it so the abort mode is only in effect as long as device is open. This way you can mix and match CUPS and cat(1) freely and nothing bad happens even if you run out of paper. It is also safer in the face of any unexpected crashes. It has to be noted that mixing LPABORT and O_NONBLOCK is not advised. It probably does not do what you want: instead of returning -ENOSPC it will always return -EAGAIN (because it would otherwise block while waiting for the paper). Applications which use O_NONBLOCK should continue to use LPGETSTATUS like before. Finally, CUPS actually requires patching to take full advantage of this. It has several components; those which invoke LPABORT work, but some of them need the ioctl added. This is completely compatible, you can mix old CUPS and new kernels or vice versa. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: cdc-acm: fix sysfs attribute registration bugAlan Stern
This patch (as950) fixes a bug in the cdc-acm driver. It doesn't keep track of which interface (control or data) the sysfs attributes get registered for, and as a result, during disconnect it will sometimes attempt to remove the attributes from the wrong interface. The left-over attributes can cause a crash later on, particularly if the driver module has been unloaded. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: class: usblp: clean up urb->status usageGreg Kroah-Hartman
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: class: cdc-acm: clean up urb->status usageGreg Kroah-Hartman
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: usblp: "Big cleanup" breaks O_NONBLOCKPete Zaitcev
I found the first regresson in the rewritten ("all dynamic" and "no races") driver. If application uses O_NONBLOCK, I return -EAGAIN despite the URB being submitted successfuly. This causes the application to resubmit the same data erroneously. The fix is to pretend that the transfer has succeeded even if URB was merely queued. It is the same behaviour as with the old version. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: cdc-acm: add new device id to option driverAndrey Arapov
USB: add new device id to option driver device is Samsung X180 China cellphone Signed-off-by: Andrey Arapov <andrey.arapov@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: usblp: add dynamic URBs, fix racesPete Zaitcev
This patch's main bulk aims to make usblp the premier driver for code pillaging once again. The code is as streamlined as possible and is bug-free as possible. The usb-skeleton performs the same function, but is somewhat abstract. The usblp is usb-skeleton which is actually used by many. Since I combed a few small bugs away, this also fixes the small races we had in usblp for a while. For example, now it's possible for several threads to make write(2) calls (sounds silly, but consider a printer for paper record, where every line of text is self-contained and thus it's all right to have them interleaved). Also gone are issues with interrupts using barriers dangerously. This patch makes use of Oliver's anchor, and so it must trail the anchor patch on the way to Linus. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08usblp: Don't let suspend to kill ->usedPete Zaitcev
Suspend destroys refcounting for open/release. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: usblp: Use correct DMA address in case of probe errorPete Zaitcev
Looks like the error path had a copy-paste error. The normal exit path uses correct URB already. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-27USB: cdc-acm: export parsed capabilities through sysfsOliver Neukum
this patch exports the attributes cdc-acm knows about a device through sysfs. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-19usblp: quirk flag and device entry for Seiko Epson M129C printerAlan Stern
This patch (as872) adds a device table entry and a new quirk flag to the usblp driver for the Seiko Epson Receipt printer. This printer returns Vendor-Specific values for bInterfaceClass and bInterfaceSubClass, but the bInterfaceProtocol value is valid and it works with usblp. The new quirks flag tells the driver to ignore the Class and SubClass values in the interface descriptor. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: fix spinlock recursion in cdc-acm.cOliver Neukum
this fixes the spinlock recursion issue. The older fix was incomplete. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16USB: quirky device for cdc-acmOliver Neukum
here's a quirklist entry reported by Stephen Murphy. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16USB: cdc-acm: fix incorrect throtteling, make set_control optionalOliver Neukum
this is Joris' fixes reshuffelled and features renamed as David requested. - acm_set_control is not mandatory, honour that - throtteling is reset upon open - throtteling is read consistently when processing input data Signed-off-by: Joris van Rantwijk <jorispubl@xs4all.nl> Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: autosuspend for usb printer driverOliver Neukum
this implements autosuspend for usb printers. It compiles and is tested. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05USB: usblp.c - add Kyocera Mita FS 820 to list of "quirky" printersMartin Williges
This patch gets the Kyocera FS-820 working with cups 1.2 via usb again. It adds the printer to the list of "quirky" printers. The printer seems not answer to ID requests some seconds after plugging in. Patch is based on linux-2.6.19.1. Background: As far as I could see (strace, usbmon), the Kyocera FS-820 answers to ID requests only a few seconds after plugging it in. This applies to detecting it with cups and is also true for the printing itself, which is initiated with an ID request. Since I have little usb knowledge, maybe someone can interpret the data, especially the fist bulk transfer - why request 8192 bytes? This is the second version of the patch. usbmon output of printing an email without patch: tail -F /tmp/printlog.txt c636e140 3374734463 S Bi:002:02 -115 8192 < c9d43b40 3374734494 S Ci:002:00 s a1 00 0000 0000 03ff 1023 < c9d43b40 3379732301 C Ci:002:00 -104 0 c636e140 3379733294 C Bi:002:02 -2 0 [...repeating...] with patch: tail -F /tmp/printlog.txt d9cb82c0 3729790131 S Ci:002:00 s a1 00 0000 0000 03ff 1023 < d9cb82c0 3729791725 C Ci:002:00 0 91 = 005b4944 3a46532d 3832303b 4d46473a 4b796f63 6572613b 434d443a 50434c58 df956320 3732493190 S Bo:002:01 -115 1347 = 1b252d31 32333435 5840504a 4c0a4050 4a4c2053 4554204d 414e5541 4c464545 [...more data...] Signed-off-by: Martin Williges <kernel@zut.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20USB: mutexification of usblpOliver Neukum
this patch: - converts usblp fully to mutex - makes sleeping interruptible where EINTR can be returned anyway Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-08[PATCH] tty: switch to ktermiosAlan Cox
This is the grungy swap all the occurrences in the right places patch that goes with the updates. At this point we have the same functionality as before (except that sgttyb() returns speeds not zero) and are ready to begin turning new stuff on providing nobody reports lots of bugs If you are a tty driver author converting an out of tree driver the only impact should be termios->ktermios name changes for the speed/property setting functions from your upper layers. If you are implementing your own TCGETS function before then your driver was broken already and its about to get a whole lot more painful for you so please fix it 8) Also fill in c_ispeed/ospeed on init for most devices, although the current code will do this for you anyway but I'd like eventually to lose that extra paranoia [akpm@osdl.org: bluetooth fix] [mp3@de.ibm.com: sclp fix] [mp3@de.ibm.com: warning fix for tty3270] [hugh@veritas.com: fix tty_ioctl powerpc build] [jdike@addtoit.com: uml: fix ->set_termios declaration] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Acked-by: Peter Oberparleiter <oberpar@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-01USB: cdc-acm: Use usb_endpoint_* functionsLuiz Fernando N. Capitulino
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-03USB: usblp: fix system suspend for some systemsOliver Neukum
this has been confirmed to fix suspend problems with usblp. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-03USB: failure in usblp's error pathOliver Neukum
if urb submission fails due to a transient error here eg. ENOMEM , the driver is dead. This fixes it. Regards Oliver Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17USB: fix suspend support for usblpOliver Neukum
this implements suspend support for usblp. According to the CUPS people ENODEV will make CUPS retry the job. Thus it is returned in the runtime case. My printer survives suspend/resume cycles with it. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17USB: fix cdc-acm problems with hard irq? (inconsistent lock state)Jarek Poplawski
Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17USB: Support for BT On-Air USB modem in cdc-acm.cChris Malley
The patch below is a necessary workaround to support the BT On-Air USB modem, which fails to initialise properly during normal probing thus: Sep 30 17:34:57 sled kernel: drivers/usb/class/cdc-acm.c: Zero length descriptor references Sep 30 17:34:57 sled kernel: cdc_acm: probe of 1-1.2:1.0 failed with error -22 Adding the patch below causes the probing section to be skipped, and the modem then initialises correctly. Signed-off-by: Chris Malley <mail@chrismalley.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-02[PATCH] const struct tty_operationsJeff Dike
As part of an SMP cleanliness pass over UML, I consted a bunch of structures in order to not have to document their locking. One of these structures was a struct tty_operations. In order to const it in UML without introducing compiler complaints, the declaration of tty_set_operations needs to be changed, and then all of its callers need to be fixed. This patch declares all struct tty_operations in the tree as const. In all cases, they are static and used only as input to tty_set_operations. As an extra check, I ran an i386 allyesconfig build which produced no extra warnings. 53 drivers are affected. I checked the history of a bunch of them, and in most cases, there have been only a handful of maintenance changes in the last six months. serial_core.c was the busiest one that I looked at. Signed-off-by: Jeff Dike <jdike@addtoit.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27USB: fix __must_check warnings in drivers/usb/class/Greg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: usblp: Use usb_endpoint_* functions.Luiz Fernando N. Capitulino
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: Make file operations structs in drivers/usb const.Luiz Fernando N. Capitulino
Making structs const prevents accidental bugs and with the proper debug options they're protected against corruption. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: update for acm in quirks and debugOliver Neukum
this adds better debugging output & an update of the quirk list to the acm driver Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEVGreg Kroah-Hartman
I've always found this flag confusing. Now that devfs is no longer around, it has been renamed, and the documentation for when this flag should be used has been updated. Also fixes all drivers that use this flag. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer neededGreg Kroah-Hartman
Also fixes all drivers that set this field. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: move <linux/usb_cdc.h> to <linux/usb/cdc.h>David Brownell
This moves <linux/usb_cdc.h> to <linux/usb/cdc.h> to reduce some of the clutter of usb header files. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: cdc-acm: add a new special case for modems with buggy firmwareOliver Neukum
this fixes the "duplicated text" bug. There's a modem that cannot cope with large transfers and more than one urb in flight. This patch adds a special case to the driver. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: convert a bunch of USB semaphores to mutexesArjan van de Ven
the patch below converts a bunch of semaphores-used-as-mutex in the USB code to mutexes Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: remove OBSOLETE_OSS_USB_DRIVER driversAdrian Bunk
This patch removes the obsolete USB_MIDI and USB_AUDIO drivers. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: fix oops in acm disconnectOliver Neukum
this fixes an oops with disconnection in acm. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: cleanup of usblpOliver Neukum
this fixes -potential hang by disconnecting through usbfs -kzalloc -general cleanup -micro optimisation in interrupt handlers It compiles and I am printing. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-10[PATCH] TTY layer buffering revampAlan Cox
The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
2006-01-04[PATCH] USB: Export IEEE-1284 device id in sysfs for usblp devicesDavid Woodhouse
I looked at the userspace code which uses the LPIOC_GET_DEVICE_ID ioctl and I almost went blind. Let's export it in sysfs instead, and just as a string instead of with a big-endian length at the beginning of it. This also prints the message about finding the printer _after_ we know the minor device number it's going to have, rather than reporting all printers as 'usblp0'. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: ioctl compat for usblp.cPete Zaitcev
From: David Woodhouse <dwmw2> David has a G5 with a printer. I am quite surprised that nobody else noticed this before. Linus has a G5. Hackers hate printing in general, maybe. We do not use BKL anymore, because one of code paths had a sleeping call, so we had to use a semaphore. I am sure it's safe to use unlocked_ioctl. The new ioctls return long and retval is int. It looks completely fine to me. We never want these extra bits, and the sign extension ought to work right. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --