aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/fsl_qe_udc.c
AgeCommit message (Collapse)Author
2009-09-23USB: fsl_qe_udc: Add fsl,mpc8323-qe-usb compatible entryAnton Vorontsov
Current bindings specify that "fsl,mpc8323-qe-usb" compatible entry should be used as a base match for QE UDCs, so update the driver to comply with the bindings. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix stalled TX requests bugAnton Vorontsov
While disabling an endpoint the driver nuking any pending requests, thus completing them with -ESHUTDOWN status. But the driver doesn't clear the tx_req, which means that a next TX request (after ep_enable), might get stalled, since the driver won't queue the new reqests. This patch fixes a bug I'm observing with ethernet gadget while playing with ifconfig usb0 up/down (the up/down sequence disables and enables `in' and `out' endpoints). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix muram corruption by disabled endpointsAnton Vorontsov
Before freeing an endpoint's muram memory, we should stop all activity of the endpoint, otherwise the QE UDC controller might do nasty things with the muram memory that isn't belong to that endpoint anymore. The qe_ep_reset() effectively flushes the hardware fifos, finishes all late transaction and thus prevents the corruption. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix disconnects reporting during bus resetAnton Vorontsov
Freescale QE UDC controllers can't report the "port change" states, so the only way to handle disconnects is to process bus reset interrupts. The bus reset can take some time, that is, few irqs. Gadgets may print the disconnection events, and this causes few repetitive messages in the kernel log. This patch fixes the issue by using the usb_state machine, if the usb controller has been already reset, just quit the reset irq early. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix QE USB controller initializationAnton Vorontsov
qe_udc_reg_init() leaves the USB controller enabled before muram memory initialized. Sometimes the uninitialized muram memory confuses the controller, and it start sending the busy interrupts. Fix this by disabling the controller, it will be enabled later by the gadget driver, at bind time. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix recursive locking bug in ch9getstatus()Anton Vorontsov
The call chain is this: qe_udc_irq() <- grabs the udc->lock spinlock rx_irq() qe_ep0_rx() ep0_setup_handle() setup_received_handle() ch9getstatus() qe_ep_queue() <- tries to grab the udc->lock again It seems unsafe to temporarily drop the lock in the ch9getstatus(), so to fix that bug the lock-less __qe_ep_queue() function implemented and used by the ch9getstatus(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix oops on QE UDC probe failureAnton Vorontsov
In case of probing errors the driver kfrees the udc_controller, but it doesn't set the pointer to NULL. When usb_gadget_register_driver is called, it checks for udc_controller != NULL, the check passes and the driver accesses nonexistent memory. Fix this by setting udc_controller to NULL in case of errors. While at it, also implement irq_of_parse_and_map()'s failure and cleanup cases. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: fsl_qe_udc: Check for muram allocation errorsAnton Vorontsov
The QE UDC doesn't check for cpm_muram_alloc() return values, this might cause all sorts of misbehaviour when cpm_muram_alloc() failed to allocate the muram memory. While at at, change few dev_dbg() calls to dev_err(), so that the driver would not die silently. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06gadget: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-30USB: fsl_qe_udc: Report disconnect before unbindingAnton Vorontsov
Gadgets disable endpoints in their disconnect callbacks, so we must call disconnect before unbinding. This also fixes muram memory leak, since we free muram in the qe_ep_disable(). But mainly the patch fixes following badness: root@b1:~# insmod fsl_qe_udc.ko fsl_qe_udc: Freescale QE/CPM USB Device Controller driver, 1.0 fsl_qe_udc e01006c0.usb: QE USB controller initialized as device root@b1:~# insmod g_ether.ko g_ether gadget: using random self ethernet address g_ether gadget: using random host ethernet address usb0: MAC be:2d:3c:fa:be:f0 usb0: HOST MAC 62:b8:6a:df:38:66 g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 g_ether gadget: g_ether ready fsl_qe_udc e01006c0.usb: fsl_qe_udc bind to driver g_ether g_ether gadget: high speed config #1: CDC Ethernet (ECM) root@b1:~# rmmod g_ether.ko ------------[ cut here ]------------ Badness at drivers/usb/gadget/composite.c:871 [...] NIP [d10c1374] composite_unbind+0x24/0x15c [g_ether] LR [d10a82f4] usb_gadget_unregister_driver+0x128/0x168 [fsl_qe_udc] Call Trace: [cfb93e80] [cfb1f3a0] 0xcfb1f3a0 (unreliable) [cfb93eb0] [d10a82f4] usb_gadget_unregister_driver+0x128/0x168 [fsl_qe_udc] [cfb93ed0] [d10c2a3c] usb_composite_unregister+0x3c/0x4c [g_ether] [cfb93ee0] [c006bde0] sys_delete_module+0x130/0x19c [cfb93f40] [c00142d8] ret_from_syscall+0x0/0x38 [...] fsl_qe_udc e01006c0.usb: unregistered gadget driver 'g_ether' Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17usb/fsl_qe_udc: clear data toggle on clear halt requestLi Yang
Fix to comply with USB spec. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17usb/fsl_qe_udc: fix response to get status requestLi Yang
The original code didn't respond correctly to get status request on device and endpoint. Although normal operations can work without the fix. It is not compliant with USB spec chapter9 and fails USBCV ch9 tests. The patch fix this and a few style/typo problems. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17usb: add Freescale QE/CPM USB peripheral controller driverLi Yang
Some of Freescale SoC chips have a QE or CPM co-processor which supports full speed USB. The driver adds device mode support of both QE and CPM USB controller to Linux USB gadget. The driver is tested with MPC8360 and MPC8272, and should work with other models having QE/CPM given minor tweaks. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>