aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/isp116x-hcd.c
AgeCommit message (Collapse)Author
2008-10-17USB: Let some USB host controllers get IRQ flags from resourceMarc Zyngier
[This version fixes a thinko in the r8a66597 driver] This patch let a few discrete USB host controllers drivers (isp116x-hcd, r8a66597-hcd and sl811-hcd) obtain IRQ flags from their IORESOURCE_IRQ resource if configured as such, much like it's been done for the smc91x driver. It spares people writing support for specific boards the burden to configure the interrupt controller independantly, and keeps all IRQ related information in a single resource. HCD that are integrally part of a SoC have been left aside, as there is probably no "wiring" options... Tested on an Xscale PXA-255 based platform with isp116x-hcd. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-25Rename WARN() to WARNING() to clear the namespaceArjan van de Ven
We want to use WARN() as a variant of WARN_ON(), however a few drivers are using WARN() internally. This patch renames these to WARNING() to avoid the namespace clash. A few cases were defining but not using the thing, for those cases I just deleted the definition. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Greg KH <greg@kroah.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-21USB: Fix bug with byte order in isp116x-hcd.c fio write/readJulien May
URB payload data are transfered in wrong byte order on a big endinan architecture (AVR32). Signed-off-by: Julien May <mailinglist@miromico.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: usb dev_name() instead of dev->bus_idKay Sievers
The bus_id field is going away, use the dev_name() function instead. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: HCDs use the do_remote_wakeup flagAlan Stern
When a USB device is suspended, whether or not it is enabled for remote wakeup depends on the device_may_wakeup() setting. The setting is then saved in the do_remote_wakeup flag. Later on, however, the device_may_wakeup() value can change because of user activity. So when testing whether a suspended device is or should be enabled for remote wakeup, we should always test do_remote_wakeup instead of device_may_wakeup(). This patch (as1076) makes that change for root hubs in several places. The patch also adjusts uhci-hcd so that when an autostopped controller is suspended, the remote wakeup setting agrees with the value recorded in the root hub's do_remote_wakeup flag. And the patch adjusts ehci-hcd so that wakeup events on selectively suspended ports (i.e., the bus itself isn't suspended) don't turn on the PME# wakeup signal. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: remove dev->power.power_stateAlan Stern
power.power_state is scheduled for removal. This patch (as1053) removes all uses of that field from drivers/usb. Almost all of them were write-only, the most significant exceptions being sl811-hcd.c and u132-hcd.c. Part of this patch was written by Pavel Machek. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-11usb host: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable USB HCDs, to allow re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04USB: isp116x: fix enumeration on bootAnti Sullin
This patch removes the buffering of the status register. USB core behavior has changed a bit and this buffering was not refreshed at the right time. The core got buffered old value of HCRHPORT and it did not detect any devices on boot. Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Acked by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Drop unnecessary continue in a few driversJulia Lawall
Continue is not needed at the bottom of a loop. The semantic patch implementing this change is as follows: @@ @@ for (...;...;...) { ... if (...) { ... - continue; } } Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: Eliminate urb->status usage!Alan Stern
This patch (as979) removes the last vestiges of urb->status from the host controller drivers and the root-hub emulator. Now the field doesn't get set until just before the URB's completion routine is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: add urb->unlinked fieldAlan Stern
This patch (as970) adds a new urb->unlinked field, which is used to store the status of unlinked URBs since we can't use urb->status for that purpose any more. To help simplify the HCDs, usbcore will check urb->unlinked before calling the completion handler; if the value is set it will automatically override the status reported by the HCD. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: centralize -EREMOTEIO handlingAlan Stern
This patch (as969) continues the ongoing changes to the way HCDs report URB statuses. The programming interface has been simplified by making usbcore responsible for clearing urb->hcpriv and for setting -EREMOTEIO status when an URB with the URB_SHORT_NOT_OK flag ends up as a short transfer. By moving the work out of the HCDs, this removes a fair amount of repeated code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: remove unnecessary tests in isp116x and sl811Alan Stern
This patch (as962) cleans up some code I forgot to remove earlier in the isp116x and sl811 HCDs. There is no longer any need to check for unlink-during-submit; it can't happen since the endpoint queues are now under the protection of the HCD-private spinlock. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: make HCDs responsible for managing endpoint queuesAlan Stern
This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19isp116x-hcd: prepare for urb->statusAlan Stern
This patch (as931b), adapted from a patch by Olav Kongas, makes a small set of conservative changes to the isp116x-hcd driver in preparation for the removal of urb->status. finish_request() is moved up in the source and is called as soon as the URB is known to have completed, rather than after all the active endpoints have been scanned. The status of a completed URB is kept in a local variable and copied to urb->status only when the URB is about to be given back. -EREMOTEIO error status for control transfers is set after the status stage rather than when the short packet arrives. Some unnecessary uses of urb->lock are removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16USB: change __init to __devinit for isp116x_probePrarit Bhargava
Change __init to __devinit for isp116x_probe. Resolves MODPOST warning: WARNING: drivers/usb/host/isp116x-hcd.o - Section mismatch: reference to .init.text:isp116x_probe from .data.rel.local between 'isp116x_driver' (at offset 0x0) and 'isp116x_hc_driver' Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-27USB: Make file operations structs in drivers/usb const.Luiz Fernando N. Capitulino
Making structs const prevents accidental bugs and with the proper debug options they're protected against corruption. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27[PATCH] inode_diet: Replace inode.u.generic_ip with inode.i_privateTheodore Ts'o
The following patches reduce the size of the VFS inode structure by 28 bytes on a UP x86. (It would be more on an x86_64 system). This is a 10% reduction in the inode size on a UP kernel that is configured in a production mode (i.e., with no spinlock or other debugging functions enabled; if you want to save memory taken up by in-core inodes, the first thing you should do is disable the debugging options; they are responsible for a huge amount of bloat in the VFS inode structure). This patch: The filesystem or device-specific pointer in the inode is inside a union, which is pretty pointless given that all 30+ users of this field have been using the void pointer. Get rid of the union and rename it to i_private, with a comment to explain who is allowed to use the void pointer. This is just a cleanup, but it allows us to reuse the union 'u' for something something where the union will actually be used. [judith@osdl.org: powerpc build fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Judith Lebzelter <judith@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02[PATCH] irq-flags: usb: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-21[PATCH] USB: move hardware-specific <linux/usb_*.h> to <linux/usb/*.h>David Brownell
This moves header files for controller-specific platform data from <linux/usb_XXX.h> to <linux/usb/XXX.h> to start reducing some clutter. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: negative index in drivers/usb/host/isp116x-hcd.cEric Sesterhenn
From: Eric Sesterhenn <snakebyte@gmx.de> This fixes coverity Bug #390. With the following code ret = ep->branch = balance(isp116x, ep->period, ep->load); if (ret < 0) goto fail; the problem is that ret and balance are of the type int, and ep->branch is u16. so the int balance() returns gets reduced to u16 and then converted to an int again, which removes the sign. Maybe the following little c program can explain it better:
2006-03-20[PATCH] USB: fix initdata issue in isp116x-hcdGreg Kroah-Hartman
As found by Sam's scripts. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB core and HCDs: don't put_device while atomicAlan Stern
This patch (as640) removes several put_device and the corresponding get_device calls from the USB core and HCDs. Some of the puts were done in atomic contexts, and none of them are needed since the core now guarantees that every endpoint will be disabled and every URB completed before a USB device is released. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: isp116x-hcd: replace mdelay() by msleep()Olav Kongas
Replace mdelay() by msleep() in bus_suspend(); the rest of the system will gain 7ms. The related code is reorganized to minimize the number of locking/unlocking calls. The last hunk of the patch is the formatting change by Lindent. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: isp116x-hcd.c: Removed unused variableDaniel Marjamäki
Removed unused variable Signed-off-by: Daniel Marjamäki <daniel.marjamaki@comhem.se> Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: isp116x-hcd: minor cleanupOlav Kongas
When going to suspend, there's no point in setting HC state in host controller driver as USB core takes care of this. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: wakeup flag updates (3/3) isp116x-hcdDavid Brownell
This makes the ISP116x HCD use the driver model wakeup flags for its controller, not the flags in the HCD glue (which will be removed). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: isp116x-hcd: cleanupOlav Kongas
The attached patch makes a cleanup of isp116x-hcd. Most of the volume of the patch comes from 2 sources: moving the code around to get rid of a few function prototypes and reworking register dumping functions/macros. Among other things, switched over from using procfs to debugfs. Cleanup. The following changes were made: - Rework register dumping code so it can be used for dumping to both syslog and debugfs. - Switch from procfs to debugfs.. - Die gracefully on Unrecoverable Error interrupt. - Fix memory leak in isp116x_urb_enqueue(), if HC happens to die in a narrow time window. - Fix a 'sparce' warning (unnecessary cast). - Report Devices Removable for root hub ports by default (was Devices Permanently Attached). - Move bus suspend/resume functions down in code to get rid of a few function prototypes. - A number of one-line cleanups. - Add an entry to MAINTAINERS. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> MAINTAINERS | 6 drivers/usb/host/isp116x-hcd.c | 429 ++++++++++++++++------------------------- drivers/usb/host/isp116x.h | 83 +++++-- 3 files changed, 230 insertions(+), 288 deletions(-)
2006-01-04[PATCH] USB: isp116x-hcd: support reiniting HC on resumeOlav Kongas
Until now the isp116x-hcd had no support to reinitialize the HC on resume, if the controller lost its state during suspend. This patch, generated against your Oct 26 git tree, adds that support. The patch is basically the same as the one tested by Ivan Kalatchev, who reported the problem, on 2.6.13. Please apply, Support reinitializing the isp116x host controller from scratch on resume, if the controller has lost its state. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09[DRIVER MODEL] Convert platform drivers to use struct platform_driverRussell King
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspendAlan Stern
This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] ISP116x PM updatesDavid Brownell
This makes the isp116x driver stop using usb_suspend_device() and usb_resume_device() ... usbcore now calls to the root hub methods, removing the need for this. It also switches from keventd to khubd for remote wakeup. (Compile tested.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/isp116x-hcd.c | 29 ++++------------------------- drivers/usb/host/isp116x.h | 1 - 2 files changed, 4 insertions(+), 26 deletions(-)
2005-10-28[PATCH] remove usb_suspend_device() parameterDavid Brownell
This patch removes the extra usb_suspend_device() parameter. The original reason to pass that parameter was so that this routine could suspend any active children. A previous patch removed that functionality ... leaving no reason to pass the parameter. A close analogy is pci_set_power_state, which doesn't need a pm_message_t either. On the internal code path that comes through the driver model, the parameter is now used to distinguish cases where USB devices need to "freeze" but not suspend. It also checks for an error case that's accessible through sysfs: attempting to suspend a device before its interfaces (or for hubs, ports). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-)
2005-10-28Merge ../bleed-2.6Greg KH
2005-10-28[PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] gfp_t: drivers/usbAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] isp116x-hcd: fix handling of short transfersOlav Kongas
Increased use of scatter-gather by usb-storage driver after 2.6.13 has exposed a buggy codepath in isp116x-hcd, which was probably never visited before: bug happened only for those urbs, for which URB_SHORT_NOT_OK was set AND short transfer occurred. The fix attached was tested in 2 ways: (a) it fixed failing initialization of a flash drive with an embedded hub; (b) the fix was tested with 'usbtest' against a modified g_zero driver (on top of net2280), which generated short bulk IN transfers of various lengths including multiples and non-multiples of max_packet_length. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08[PATCH] USB: Switch isp116x-hcd over to root hub interruptOlav Kongas
Switch isp116x-hcd over from root hub polling to interrupt. This change closes also a race that was present with the old polling scheme: status polling could happen in a time window, where root hub status bits were not stable. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] USB: isp116x-hcd: remove clock() and reset()Olav Kongas
This patch removes support for user-provided platform-specific hardware reset and clock starting/stopping functions. Hardware reset was needed earlier as getting the software reset working was tricky due to the lack of documentation. Recently, a number of people using isp116x have said the software reset is working for them. I haven't heard of anybody using the clock starting/stopping. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] USB: isp116x-hcd: per-port overcurrent reportingOlav Kongas
This patch sets the isp116x to report overcurrent always per-port. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] USB: isp116x-hcd: support only per-port power switchingOlav Kongas
The isp116x chip will now always be in per-port power switching mode. Remove conf options to set any other mode. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] USB: isp116x-hcd: remove unnecessary ClockNotStop configuration optionOlav Kongas
Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] USB: isp116x-hcd: use fixed power-on-to-power-good-timeOlav Kongas
This patch removes the power-on-to-power-good-time configuration option for isp116x-hcd. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-07[PATCH] USB: convert kcalloc to kzallocPekka Enberg
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04[PATCH] USB: Fix setup packet initialization in isp116x-hcdOlav Kongas
When recently addressing remarks by Alexey Dobriyan about the isp116x-hcd, I introduced a bug in the driver. Please apply the attached patch to fix it. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12[PATCH] USB: Fix kmalloc's flags type in USBOlav Kongas
Greg, This patch fixes the kmalloc() flags argument type in USB subsystem; hopefully all of its occurences. The patch was made against patch-2.6.12-git2 from Jun 20. Cleanup of flags for kmalloc() in USB subsystem. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-12[PATCH] USB: isp116x-hcd cleanupOlav Kongas
Sorry that it took so long. Here comes a cleanup patch that addresses the remarks by Alexey Dobriyan about gregkh-usb-usb-isp116x-hcd-add.patch EXCEPT the remark about the typecasting of mem_flags argument for kcalloc; this will be addressed in a later patch. OlavCleanup of isp116x-hcd. Signed off by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] USB HCDs: no longer need to register root hubAlan Stern
This patch changes the host controller drivers; they no longer need to register their root hubs because usbcore will take care of it for them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>