aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/ohci-ppc-of.c
AgeCommit message (Collapse)Author
2009-01-07USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]Vitaly Bordug
A published errata for ppc440epx states, that when running Linux with both EHCI and OHCI modules loaded, the EHCI module experiences a fatal error when a high-speed device is connected to the USB2.0, and functions normally if OHCI module is not loaded. There used to be recommendation to use only hi-speed or full-speed devices with specific conditions, when respective module was unloaded. Later, it was observed that ohci suspend is enough to keep things going, and it was turned into workaround, as explained below. Quote from original descriprion: The 440EPx USB 2.0 Host controller is an EHCI compliant controller. In USB 2.0 Host controllers, each EHCI controller has one or more companion controllers, which may be OHCI or UHCI. An USB 2.0 Host controller will contain one or more ports. For each port, only one of the controllers is connected at any one time. In the 440EPx, there is only one OHCI companion controller, and only one USB 2.0 Host port. All ports on an USB 2.0 controller default to the companion controller. If you load only an ohci driver, it will have control of the ports and any deviceplugged in will operate, although high speed devices will be forced to operate at full speed. When an ehci driver is loaded, it explicitly takes control of the ports. If there is a device connected, and / or every time there is a new device connected, the ehci driver determines if the device is high speed or not. If it is high speed, the driver retains control of the port. If it is not, the driver explicitly gives the companion controller control of the port. The is a software workaround that uses Initial version of the software workaround was posted to linux-usb-devel: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg54019.html and later available from amcc.com: http://www.amcc.com/Embedded/Downloads/download.html?cat=1&family=15&ins=2 The patch below is generally based on the latter, but reworked to powerpc/of_device USB drivers, and uses a few devicetree inquiries to get rid of (some) hardcoded defines. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Stefan Roese <sr@denx.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: automatically enable RHSC interruptsAlan Stern
This patch (as1069c) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: ohci-ppc-of: use linux/of_platform.h instead of asmStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-06Revert "USB: don't explicitly reenable root-hub status interrupts"Linus Torvalds
This reverts commit e872154921a6b5256a3c412dd69158ac0b135176. Andrey Borzenkov reports that it resulted in a totally hung machine for him when loading the OHCI driver. Extensive netconsole capture with SysRq output shows that modprobe gets stuck in ohci_hub_status_data() when probing and enabling the OHCI controller, see for example http://lkml.org/lkml/2008/7/5/236 for an analysis. The problem appears to be an interrupt flood triggered by the commit that gets reverted, and Andrey confirmed that the revert makes things work for him again. Reported-and-tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24USB: don't explicitly reenable root-hub status interruptsAlan Stern
This patch (as1069b) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26[POWERPC] mpc5200: normalize compatible property bindingsGrant Likely
Update MPC5200 drivers to also look for compatible properties in the form "fsl,mpc5200-*" to better conform to open firmware generic names recommended practice as published here: http://www.openfirmware.org/1275/practice/gnames/gnamv14a.html This patch should *not* break compatibility with older device trees which do not use the 'fsl,' prefix. The drivers will still bind against the older names also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-12-17USB: use IRQF_DISABLED for HCD interrupt handlersAlan Stern
Host controller IRQs are supposed to be serviced with interrupts disabled. This patch (as1026) adds an IRQF_DISABLED flag to all the controller drivers that lack it. It also replaces the spin_lock_irqsave() and spin_unlock_irqrestore() calls in uhci_irq() with simple spin_lock() and spin_unlock(). This fixes Bugzilla #9335. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: add runtime frame_no quirk for big-endian OHCIValentine Barshak
Add OHCI big endian frame_no quirk. The frame_no value stored in the HCCA is a 16 bit field at a specific offset, but since not all CPUs can do 16-bit memory accesses it's used as a 32 bit field. And that's why big-endian OHCI must shift 16 bits ... unless the spec is not followed. Currently there's one MPC52xx platform that doesn't need the shift. This patch adds a new "big endian frame_no" quirk to control that at runtime. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-07[POWERPC] Rename device_is_compatible to of_device_is_compatibleStephen Rothwell
for consistency with other Open Firmware interfaces (and Sparc). This is just a straight replacement. This leaves the compatibility define in place. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07ohci: Add support for OHCI controller on the of_platform busSylvain Munaut
PPC embedded systems can have a ohci controller builtin. In the new model, it will end up as a driver on the of_platform bus, this patches takes care of them. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>