aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/uhci-hcd.h
AgeCommit message (Collapse)Author
2007-02-23UHCI: Eliminate asynchronous skeleton Queue HeadersAlan Stern
This patch (as856) attempts to improve the performance of uhci-hcd by removing the asynchronous skeleton Queue Headers. They don't contain any useful information but the controller has to read through them at least once every millisecond, incurring a non-zero DMA overhead. Now all the asynchronous queues are combined, along with the period-1 interrupt queue, into a single list with a single skeleton QH. The start of the low-speed control, full-speed control, and bulk sublists is determined by linear search. Since there should rarely be more than a couple of QHs in the list, the searches should incur a much smaller total load than keeping the skeleton QHs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23UHCI: Add macros for computing DMA valuesAlan Stern
This patch (as855) adds some convenience macros to uhci-hcd, to help simplify the code for computing hardware DMA pointers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07UHCI: fix bandwidth allocationAlan Stern
This patch (as840) fixes the bandwidth allocation mechanism in uhci-hcd. It has never worked correctly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Improve FSBR-off timingAlan Stern
This patch (as707) improves the FSBR operation in uhci-hcd by turning it off more quickly when it isn't needed. FSBR puts a noticeable load on a computer's PCI bus, so it should be disabled as soon as possible when it isn't in use. The patch leaves it running for only 10 ms after the last URB stops using it, on the theory that this should be long enough for a driver to submit another URB if it wants keep FSBR going. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: remove hc_inaccessible flagAlan Stern
This patch (as706) removes the private hc_inaccessible flag from uhci-hcd. It's not needed because it conveys exactly the same information as the generic HCD_FLAG_HW_ACCESSIBLE bit. In its place goes a new flag recording whether the controller is dead. The new code allows a complete device reset to resurrect a dead controller (although usbcore doesn't yet implement such a facility). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: remove ISO TDs as they are usedAlan Stern
This patch (as690) does the same thing for ISO TDs as as680 did for non-ISO TDs: free them as they are used rather than all at once when an URB is complete. At the same time it fixes a minor buglet (I'm not aware of it ever affecting anyone): An ISO TD should be retired when its frame is over, regardless of whether or not the hardware has marked it inactive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: store the period in the queue headerAlan Stern
This patch (as689) stores the period for periodic transfers (interrupt and ISO) in the queue header. This is necessary for proper bandwidth tracking (not yet implemented). It also makes the scheduling of ISO transfers a bit more rigorous, with checks for out-of-bounds frame numbers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: use integer-sized frame numbersAlan Stern
This patch (as687) changes uhci-hcd to keep track of frame numbers as full-sized integers rather than 11-bit values. This makes them a lot easier to handle and makes it possible to schedule beyond a 2-second window, should anyone ever want to do so. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Reimplement FSBRAlan Stern
This patch (as683) re-implements Full-Speed Bandwidth Reclamation (FSBR) properly. It keeps track of which endpoint queues have advanced, and when none have advanced for a sufficiently long time, FSBR is turned off. The next TD on each of the non-moving queues is modified to generate an interrupt on completion, so that FSBR can be re-enabled as soon as the hardware starts to make some progress. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Eliminate the TD-removal listAlan Stern
This patch (as682) gets rid of the TD-removal list in uhci-hcd. It is no longer needed because now TDs are not freed until we know the hardware isn't using them. It also simplifies the code for adding and removing TDs to/from URBs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Remove non-iso TDs as they are usedAlan Stern
This patch (as680) frees non-isochronous TDs as they are used, rather than all at once when an URB is complete. Although not a terribly important change in itself, it opens the door to a later enhancement that will reduce storage requirements by allocating only a limited number of TDs at any time for each endpoint queue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: UHCI: store the endpoint type in the QH structureAlan Stern
This patch (as675) simplifies uhci-hcd slightly by storing each endpoint's type in the corresponding Queue Header structure. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UHCI: don't track suspended portsAlan Stern
Someone recently posted a bug report where it turned out that uhci-hcd was disagreeing with the UHCI controller over whether or not a port was suspended: The driver thought it wasn't and the hardware thought it was. This patch (as665) fixes the problem and simplifies the driver by removing the internal state-tracking completely. Now the driver just asks the hardware whether a port is suspended. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: improve debugging codeAlan Stern
This patch (as626) makes some improvements to the debugging code in uhci-hcd. The main change is that now the code won't get compiled if CONFIG_USB_DEBUG isn't set. But there are other changes too, like adding a missing .owner field and printing a debugging dump if the controller dies. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: remove main list of URBsAlan Stern
As part of reorienting uhci-hcd away from URBs and toward endpoint queues, this patch (as625) eliminates the driver's main list of URBs. The list wsa used mainly in checking for URB completions; now the driver goes through the list of active endpoints and checks the members of the queues. As a side effect, I had to remove the code that looks for FSBR timeouts. For now, FSBR will remain on so long as any URBs on a full-speed control or bulk queue request it, even if the queue isn't advancing. A later patch can add more intelligent handling. This isn't a huge drawback; it's pretty rare for an URB to get stuck for more than a fraction of a second. (And it will help the people trying to use those insane HP USB devices.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: use dummy TDsAlan Stern
This patch (as624) fixes a hardware race in uhci-hcd by adding a dummy TD to the end of each endpoint's queue. Without the dummy the host controller will effectively turn off the queue when it reaches the end, which happens asynchronously. This leads to a potential problem when new transfer descriptors are added to the end of the queue; they may never get used. With a dummy TD present the controller never turns off the queue; instead it just stops at the dummy and leaves the queue on but inactive. When new TDs are added to the end of the queue, the first new one gets written over the dummy. Thus there's never any question about whether the queue is running or needs to be restarted. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: use one QH per endpoint, not per URBAlan Stern
This patch (as623) changes the uhci-hcd driver to make it use one QH per device endpoint, instead of a QH per URB as it does now. Numerous areas of the code are affected by this. For example, the distinction between "queued" URBs and non-"queued" URBs no longer exists; all URBs belong to a queue and some just happen to be at the queue's head. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: UHCI: edit some commentsAlan Stern
This patch (as615b) edits a large number of comments in the uhci-hcd code, mainly removing excess apostrophes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: UHCI: change uhci_explen macroAlan Stern
This patch (as616) changed the uhci_explen macro in uhci-hcd.h so that it now accepts the desired length, rather than length - 1 with special handling for 0. This also fixes a minor bug that would show up only when a driver submits a 0-length bulk URB. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] USB: UHCI: Spruce up some commentsAlan Stern
This patch (as570) changes some comments in the uhci-hcd header file and removes an unused declaration (something I forgot to erase in an earlier patch). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/uhci-hcd.h | 91 +++++++++++++++++++++++--------------------- 1 file changed, 49 insertions(+), 42 deletions(-)
2005-10-28[PATCH] USB: UHCI: Split apart the physical and logical framelist arraysAlan Stern
This patch (as563) splits the physical and logical framelist arrays in uhci-hcd into two separate pieces. This will allow slightly better memory utilization, since each piece is no larger than a single page whereas before the whole thing was a little bigger than two pages. It also allows the logical array to be allocated in non-DMA-coherent memory. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] USB: UHCI: Remove unused fields and unneeded tests for NULLAlan Stern
This patch (as562) removes from the uhci-hcd driver a few unused fields and some unnecessary tests against NULL and assignments to NULL. In fact it wasn't until fairly recently that the tests became unnecessary. Before last winter it was possible that the driver's stop() routine would get called even if the start() routine returned an error, but now that can't happen. Hence there's no longer any need to check for partial initialization. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB UHCI: remove the FSBR kernel timerAlan Stern
This patch (as558) removes from the UHCI driver a kernel timer used for checking Full Speed Bandwidth Reclamation (FSBR). The checking can be done during normal root-hub polling; it doesn't need a separate timer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] UHCI: Don't store device pointer in QH or TDAlan Stern
This patch simplifies the uhci-hcd driver by removing the device pointer currently stored in the QH and TD structures. Those pointers weren't being used for anything other than to increment the device's reference count, which is unnecessary since the device is used only when an URB completes, and outstanding URBs take their own reference to the device. As a useful side effect, this change means that uhci-hcd no longer needs to have the root-hub device available in the start routine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] USB UHCI: Use root-hub IRQs while suspendedAlan Stern
This patch, which has as478b as a prerequisite, enables the uhci-hcd driver to take advantage of root-hub IRQs rather than polling during the time it is suspended. (Unfortunately the hardware doesn't support port-change interrupts while the controller is running.) It also turns off the driver's private timer while the controller is suspended, as it isn't needed then. The combined elimination of polling interrupts and timer interrupts ought to be enough to allow some systems to save a noticeable amount of power while they are otherwise idle. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] USB UHCI: Add root-hub suspend/resume supportAlan Stern
This patch implements (finally!) separate suspend and resume routines for the root hub and the controller in the UHCI driver. It also changes the sequence used to reset the controller during initial probing, so as to preserve the existing state during a Resume-From-Disk. (This new sequence is what should be used in the PCI Quirks code for early USB handoffs, incidentally.) Lastly it adds a notion of the controller being "inaccessible" while in a PCI low-power state, when normal I/O operations shouldn't be allowed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] USB UHCI: Add root hub statesAlan Stern
This patch starts making some serious changes to the UHCI driver. There's a set of private states for the root hub, and the internal routines for suspending and resuming work completely differently, with transitions based on the new states. Now the driver distinguishes between a privately auto-stopped state and a publicly suspended state, and it will properly suspend controllers with broken resume-detect interrupts instead of resetting them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!