aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)Author
2008-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (64 commits) PCI: make pci_bus a struct device PCI: fix codingstyle issues in include/linux/pci.h PCI: fix codingstyle issues in drivers/pci/pci.h PCI: PCIE ASPM support PCI: Fix fakephp deadlock PCI: modify SB700 SATA MSI quirk PCI: Run ACPI _OSC method on root bridges only PCI ACPI: AER driver should only register PCIe devices with _OSC PCI ACPI: Added a function to register _OSC with only PCIe devices. PCI: constify function pointer tables PCI: Convert drivers/pci/proc.c to use unlocked_ioctl pciehp: block new requests from the device before power off pciehp: workaround against Bad DLLP during power off pciehp: wait for 1000ms before LED operation after power off PCI: Remove pci_enable_device_bars() from documentation PCI: Remove pci_enable_device_bars() PCI: Remove users of pci_enable_device_bars() PCI: Add pci_enable_device_{io,mem} intefaces PCI: avoid save the same type of cap multiple times PCI: correctly initialize a structure for pcie_save_pcix_state() ...
2008-02-01PCI: use dev_printk in quirk messagesbjorn.helgaas@hp.com
Convert quirk printks to dev_printk(). I made the MSI disable messages a little more consistent: - always use "disabled", not "deactivated" - specify "device MSI disabled" or "subordinate MSI disabled" when disabling MSI for only a specific device or subordinate bus Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01usb: ehci should use u16 for isochronous intervalsDavid Brownell
While most isochronous endpoints have short polling intervals, the EHCI driver won't necessarily handle larger ones correctly. This patch switches to use a "u16" to represent those periods, not a u8, since it can always work: the largest expressible period is 2^15 units ... not the previous too-short limit of 128 frames (full or low speeds) or microframes (high speed, 32 frames). This bug is essentially theoretical, since the few ISO endpoints I've seen which don't use one transfer per frame are high speed ones using more than that (including high bandwidth, 24 KB/msec). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01usb: ehci, remove false clear-reset pathDavid Brownell
Some of the "EHCI ports reset forever" problems may be explained by code paths which wrongly flagged resets as complete. This removes two such paths; the ehci_hub_status_data() path should be the only one to have an effect, since it was already properly flagged on the other path. (Issue noted by Minhyoung Kim <a9a9@lge.com>.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01usb: ohci-sm501 driverMagnus Damm
usb: ohci-sm501 driver V2 This patch adds sm501 ohci support. It's all very straightforward with the exception of dma_declare_coherent_memory() and HCD_LOCAL_MEM. Together they are used to ensure that usb data is allocated using dma_alloc_coherent(), and that only valid dma memory is used to allocate from. This driver is a platform device, and the mfd driver sm501.c is already creating one usb host controller instance per sm501. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: add support for SuperH OHCIYoshihiro Shimoda
add support for SuperH OHCI. supported CPU are: - SH7720 - SH7721 - SH7763 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: EHCI: add a short delay to the bus_suspend routineAlan Stern
This patch (as1031) adds a short delay to the bus-suspend routine in ehci-hcd. Without it some devices disconnect when they should suspend. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: EHCI: move del_timer_sync calls outside spinlocked regionAlan Stern
This patch (as1030b) moves a del_timer_sync() call outside the scope of a spinlock, where it could cause a deadlock, and adds a new del_timer_sync() call for the new IAA watchdog timer (it was omitted by mistake). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ehci completes high speed ISO URBs soonerDavid Brownell
This has some bugfixes for the EHCI driver's ISO transfer scanning logic. It was leaving ITDs and SITDs on the schedule too long, for a few different reasons, which caused trouble. (a) Look at all microframes for high speed transfers, not just the ones we expect to have finished. This way transfers ending mid-frame will complete without needing another IRQ. This also minimizes bogus scheduling underruns (e.g. EL2NSYNC). (b) When we encounter an ISO transfer (either speed, but this hits mostly at full speed) that's not yet been completed, immediately stop scanning; we've caught up to the hardware, no matter what other indications might say. (c) Always clean up ITDs (for high speed transfers) when the HC is no longer running. I'm not sure whether the last one has been observed before, but both the others have been reported with "real world" audio and video code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ehci: minor ISO updates, always support split ISODavid Brownell
Small updates to the EHCI driver's ISO support: - Get rid of the Kconfig option for full speed ISO. It may not be perfect yet, but it hasn't appeared to be dangerous and pretty much every configuration wants it. - Instead of two places to disable an empty periodic schedule after an ISO transfer completes, just have one. - After the periodic schedule is disabled, we can short-circuit the schedule scan ... it can't possibly have more work to do. Assuming a typical config with split iso enabled, the only change in behavior should be almost unobservable: quicker termination of periodic scans when the schedule gets emptied. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ehci saves some memory in ISO transfer descriptorsKarsten Wiese
In the EHCI driver, itd->usecs[8] is used in periodic_usecs(), indexed by uframe. For an ITD's unused uframes it is 0, else it contains the same value as itd->stream->usecs. To check if an ITD's uframe is used, we can instead test itd->hw_transaction[uframe]: if used, it will be nonzero no matter what endianess is used. This patch replaces those two uses, eliminates itd->usecs[], and saves eight bytes from each ITD. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: add ehci-ixp bus glueVladimir Barinov
EHCI Glue driver for Intel IXP4XX EHCI USB controller Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: add ehci-ppc-of bus glue (device-tree aware)Valentine Barshak
This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ohci-at91 uses generic GPIO callsDavid Brownell
Update the ohci-at91 bus glue to start understanding about the per-port power switch GPIOs it's given (on the sam9263-ek and potentially other boards). For the moment this just claims them and forces them active (assuming active-low power enables) whenever the HCD is loaded. The assumption is still that board setup configures the GPIOs. Using gpio_request() tracks actual usage and guards against conflict. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: fix HCD Kconfig goofageDavid Brownell
Add a missing dependency which goofs up the xconfig display. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ehci potential oops fix on ARC/TDI coresDavid Brownell
Kernel bugzilla entry #9569 reports a potential OOPS in some code supporting the integrated root hub TT support used on ARC/TDI derived cores. (This seems to have been a longstanding issue.) This patch cleans up usage of urb->dev->tt to avoid that potential oops and also fixes some overly long lines. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: add Marvell Orion USB host supportTzachi Perelstein
Some glue bits for the on-chip USB host controller in the Marvell Orion family of ARM SoCs, which is basically EHCI compatible. Signed-off-by: Tzachi Perelstein <tzachi@marvell.com> Reviewed-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ehci-hcd: fix sparse warning about shadowing 'status' symbolMarcin Slusarz
fix warning: drivers/usb/host/ehci-hcd.c:832:8: warning: symbol 'status' shadows an earlier one drivers/usb/host/ehci-hcd.c:790:71: originally declared here Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: PS3: Fix EHCI ISO transfer bugDavid Brownell
This adds a workaround for an issue reported with ISO transfers on some EHCI controllers, most recently with VIA KT800 and PS3 EHCI silicon. The issue is that the silicon doesn't necessarily seem to be done using ISO DMA descriptors (itd, sitd) when it marks them inactive. (One theory is that the ill-defined mechanism where hardware caches periodic transfer descriptors isn't invalidating their state...) With such silicon, quick re-use of those descriptors makes trouble. Waiting until the next frame seems to be a sufficient workaround. This patch ensures that the relevant descriptors aren't available for immediate re-use. It does so by not recycling them until after issuing the completion callback which would reuse them by enqueueing an URB and thus (re)allocating ISO DMA descriptors. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Masashi Kimoto <Masashi_Kimoto@hq.scei.sony.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: EHCI: add separate IAA watchdog timerAlan Stern
This patch (as1028) was mostly written by David Brownell; I made only a few changes (extra log info and a small bug fix -- which might account for why David's version had to be reverted). It adds a new watchdog timer to the ehci-hcd driver to be used exclusively for detecting lost or missing IAA notifications. Previously a shared timer had been used, which may have led to some problems as reported by Christian Hoffmann. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01usb: Remove OHCI useless masking/unmasking of WDH interruptBenjamin Herrenschmidt
The OHCI driver's IRQ handler, while processing a WDH interrupt, masks and unmasks it. I believe this is both broken (the write may still be posted during the donelist processing it's trying to safeguard) and useless as this IRQ may not be reissued until it's acked (unless this legacy code is an uncommented workaround for some chip erratum). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: convert ehci debug files to use debugfs instead of sysfsTony Jones
We should not have multiple line files in sysfs, this moves the data to debugfs instead, like the UHCI driver. Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: convert ohci debug files to use debugfs instead of sysfsTony Jones
We should not have multiple line files in sysfs, this moves the data to debugfs instead, like the UHCI driver. Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: force handover port to companion when hub_port_connect_change failsBalaji Rao
This patch hands over the port to the companion when the hub_port_connect_change fails. Signed-off-by: Balaji Rao <balajirrao@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Drop unnecessary continue in a few driversJulia Lawall
Continue is not needed at the bottom of a loop. The semantic patch implementing this change is as follows: @@ @@ for (...;...;...) { ... if (...) { ... - continue; } } Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Convert from class_device to device for USB coreTony Jones
Convert from class_device to device for drivers/usb/core. Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31Merge branch 'linux-2.6'Paul Mackerras
2008-01-28Merge branch 'pxa-plat' into develRussell King
* pxa-plat: (53 commits) [ARM] 4762/1: Basic support for Toradex Colibri module [ARM] pxa: fix mci_init functions returning -1 [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 [ARM] 4746/1: pcm027: network support for phyCORE-PXA270 [ARM] 4745/1: pcm027: default configuration [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module [NET] smc91x: Make smc91x use IRQ resource trigger flags [ARM] pxa: add default config for littleton [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) [ARM] 4664/1: Add basic support for HTC Magician PDA phones [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. [ARM] pxa: skip registers saving/restoring if entering standby mode [ARM] pxa: fix PXA27x resume [ARM] pxa: Avoid fiddling with CKEN register on suspend [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme [ARM] pxa: Add zylonite MFP wakeup configurations [ARM] pxa: program MFPs for low power mode when suspending [ARM] pxa: make MFP configuration processor independent [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions ... Conflicts: arch/arm/mach-pxa/ssp.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-27i2c/tps65010: move header to <linux/i2c/...>David Brownell
Move the tps65010 header file from the OMAP arch directory to the more generic <linux/i2c/...> directory, and remove the spurious dependency of this driver on OMAP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c: Kill rogue driver IDsJean Delvare
I2C driver IDs are optional, so if you don't need one, just omit it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c: normal_i2c can be made const (remaining drivers)Jean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-26[POWERPC] mpc5200: normalize compatible property bindingsGrant Likely
Update MPC5200 drivers to also look for compatible properties in the form "fsl,mpc5200-*" to better conform to open firmware generic names recommended practice as published here: http://www.openfirmware.org/1275/practice/gnames/gnamv14a.html This patch should *not* break compatibility with older device trees which do not use the 'fsl,' prefix. The drivers will still bind against the older names also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-26[ARM] USB: update to allow pxa27x ohci driver to support pxa3xxeric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] USB: update pxa27x ohci driver to use clk supporteric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-12-17usb: Remove broken optimisation in OHCI IRQ handlerBenjamin Herrenschmidt
The OHCI IRQ handler has an optimisation that avoids reading some chip registers when the controller reports that the interrupt was triggered *only* because completed requests were written into the controller's "done list" and handed to the host. This mechanism can't be used on some controllers. Among others, it fails for the SA1111 and the AMCC 440EP PowerPC processor. This patch removes the optimisation and makes the code clearer. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-17USB: use IRQF_DISABLED for HCD interrupt handlersAlan Stern
Host controller IRQs are supposed to be serviced with interrupts disabled. This patch (as1026) adds an IRQF_DISABLED flag to all the controller drivers that lack it. It also replaces the spin_lock_irqsave() and spin_unlock_irqrestore() calls in uhci_irq() with simple spin_lock() and spin_unlock(). This fixes Bugzilla #9335. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: fix up EHCI startup synchronizationDavid Brownell
A recent patch added software synchronization during EHCI startup, so ports aren't switched away from the companion controllers after resets have started. This patch adds a short delay letting hardware finish that port switching before any new resets begin ... so both ends of that hardware race window are closed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Dave Miller <davem@davemloft.net> Cc: Dely Sy <dely.l.sy@intel.com> Cc: stable <stable@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: fix USB_OHCI_HCD_SSB dependenciesAdrian Bunk
This patch fixes a bug introduced by commit b22817b3c81cdb18ffe3d2debfee968731a8b5f4. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: remove new OHCI build warningsDavid Brownell
Remove various newly-introduced compiler warnings for OHCI. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix ssb_ohci_probe() build bugIngo Molnar
fix ssb_ohci_probe() build bug: drivers/built-in.o: In function `ssb_ohci_probe': ohci-hcd.c:(.text+0xbff39): undefined reference to `ssb_device_enable' ohci-hcd.c:(.text+0xbff6f): undefined reference to `ssb_admatch_base' ohci-hcd.c:(.text+0xbff8b): undefined reference to `ssb_admatch_size' ohci-hcd.c:(.text+0xbffe5): undefined reference to `ssb_device_disable' [...] the reason was that this Kconfig combination was allowed: CONFIG_SSB=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_SSB=y the fix is to require a modular USB_OHCI_HCD build when SSB is modular. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: fix scheduling of Iso URBs in uhci-hcdAlan Stern
This patch (as1003) changes uhci-hcd to treat the URB_ISO_ASAP flag the same as other host controller drivers, namely, to schedule an Iso URB for the first available time slot that hasn't already expired. URBs in which the flag isn't set will be scheduled for the first slot following the last URB, even if it has expired. This fixes a problem reported by Martin Bachem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13Fix ohci-ssb with !CONFIG_PMAl Viro
ohci_bus_{suspend,resume} exists only if we have CONFIG_PM; do the same thing as other subdrivers... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12USB: mutual exclusion for EHCI init and port resetsAlan Stern
This patch (as999) fixes a problem that sometimes shows up when host controller driver modules are loaded in the wrong order. If ehci-hcd happens to initialize an EHCI controller while the companion OHCI or UHCI controller is in the middle of a port reset, the reset can fail and the companion may get very confused. The patch adds an rw-semaphore and uses it to keep EHCI initialization and port resets mutually exclusive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: David Miller <davem@davemloft.net> Cc: Dely L Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: ohci SSB bus glueMichael Buesch
This adds SSB bus glue for the USB OHCI HCD. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: ehci build fixes on au1xxx, ppc-socDavid Brownell
Cleanup: references to two PM routines (and HCD entry points) that no longer exist are swapped with their replacements. Evidently au1xxx and ppc-soc EHCI support doesn't get compiled with power management very much, or these build bugs would have been patched long ago. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: add runtime frame_no quirk for big-endian OHCIValentine Barshak
Add OHCI big endian frame_no quirk. The frame_no value stored in the HCCA is a 16 bit field at a specific offset, but since not all CPUs can do 16-bit memory accesses it's used as a 32 bit field. And that's why big-endian OHCI must shift 16 bits ... unless the spec is not followed. Currently there's one MPC52xx platform that doesn't need the shift. This patch adds a new "big endian frame_no" quirk to control that at runtime. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: r8a66597-hcd: fix driver removingYoshihiro Shimoda
Fixed the problem that accessed register of this controller after having called iounmap(). Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>