aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial/cp2101.c
AgeCommit message (Collapse)Author
2008-05-11usb-serial: Add ThinkOptics WavITBernhard Beck
Add ThinkOptics WavIt to cp2101 device table Signed-off-by: Bernhard Beck <kernel@goodcoffee.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24USB: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: serial: remove unneeded number endpoints settingsGreg Kroah-Hartman
The usb-serial core no longer checks these fields so remove them from all of the individual drivers. They will be removed from the usb-serial core in a patch later in the series. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: CP2101 Add new device IDsCraig Shelley
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-02USB: cp2101: Add identifiers for the Telegesys ETRX2USBFlorian Fainelli
This patch adds support for the Telegesys ETRX2USB which works fine with the cp2101 driver. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Tested-by: Xavier Carcelle <xavier.carcelle@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: more serial drivers writing after disconnectOliver Neukum
this covers the rest of the obvious cases by using the flags and locks to guard against disconnect which were introduced in the earlier patch against mos7720. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: CP2101 New Device IDsCraig Shelley
Six new device IDs for CP2101 driver. Cc: stable <stable@kernel.org> Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-22USB: New device ID for the CP2101 driverMartin Kusserow
attached please find a new device ID for CP2101 driver. This device is a usb stick from Dynastream to communicate with ANT wireless devices which I suppose is fairly similar to the ANT dev board having product id 0x1003. From: Martin Kusserow <kusserow@ife.ee.ethz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-17USB: cp2101: new device idJeff Long
This adds a device ID for the Aerocomm Radio Modem, which uses the cp2102. I'm sure changing num_bulk_in/num_bulk_out to NUM_DONT_CARE is the wrong fix, but this is the only device I have with a cp2102, so I have no idea what a good global value would be, if there is one. Zero didn't work with this device. From: Jeff Long <JeffLong@mitre.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: cp2101: convert to new termiosAlan Cox
- Convert to new baud rate functions - Add baud rate reporting Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: cp2101.c: add additional device IDEdouard Lafargue
This patch adds an additional device ID to the cp2101 USB serial driver. This device is a Gemalto Prox-PU or CU contactless card reader (ISO14443-A/B and Mifare). The reader is a standard Gemalto serial proximity reader using the Gemalto Block Protocol (see reader's documentation) bundled with a built-in CP2102 for serial/USB conversion. Signed-off-by: Edouard Lafargue (edouard@lafargue.name) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: cp2101: Coding style policeAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30cp2101: Remove broken termios optimisation, use proper speed APIAlan Cox
I've also enabled the commented out support for 7200, 14400, 55854, 127117 and 3686400 baud as you can now set such rates in the kernel. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: CP2101 New Device IDsCraig Shelley
Two new device IDs for CP2101 driver. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: New device IDs for cp2101 driverJon K Hellan
Here are two new device IDs for the cp2101 driver. The diff is with linus's tree as of this evending. From: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16USB: another id for cp2101 driverPozsar Balazs
This patch adds another usb id to the cp2101. It seems to work well. Please apply, thanks. Signed-off-by: Pozsar Balazs <pozsy@uhulinux.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-09[PATCH] trivial usb endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-07USB serial: add driver pointer to all usb-serial driversJohannes Hölzl
Every usb serial driver should have a pointer to the corresponding usb driver. So the usb serial core can add a new id not only to the usb serial driver, but also to the usb driver. Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag no_dynamic_id=1. This is added now. Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20Add Baltech Reader ID to CP2101 driverJohannes Hoelzl
this patch adds the Baltech Reader ID to the list of USB IDs in the CP2101 driver. From: Johannes Hoelzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-08[PATCH] tty: switch to ktermiosAlan Cox
This is the grungy swap all the occurrences in the right places patch that goes with the updates. At this point we have the same functionality as before (except that sgttyb() returns speeds not zero) and are ready to begin turning new stuff on providing nobody reports lots of bugs If you are a tty driver author converting an out of tree driver the only impact should be termios->ktermios name changes for the speed/property setting functions from your upper layers. If you are implementing your own TCGETS function before then your driver was broken already and its about to get a whole lot more painful for you so please fix it 8) Also fill in c_ispeed/ospeed on init for most devices, although the current code will do this for you anyway but I'd like eventually to lose that extra paranoia [akpm@osdl.org: bluetooth fix] [mp3@de.ibm.com: sclp fix] [mp3@de.ibm.com: warning fix for tty3270] [hugh@veritas.com: fix tty_ioctl powerpc build] [jdike@addtoit.com: uml: fix ->set_termios declaration] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Acked-by: Peter Oberparleiter <oberpar@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03USB: new VID/PID-combos for cp2101Bjorn Schneider
3 new VID/PID combinations (registered with Silicon Laboratories Inc.) added for devices made by Lipowsky Industrie Elektronik GmbH all using the CP2102 usb-to-serial converter (Baby-JTAG, Baby-LIN, HARP-1). Signed-off-by: Bjorn Schneider <schneider@lipowsky.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17USB-SERIAL:cp2101 Add new device IDCraig Shelley
This patch adds device ID 0xEA61. This is another factory default ID used by SILabs. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: move usb-serial.h to include/linux/usb/Greg Kroah-Hartman
USB serial outside of the kernel tree can not build properly due to usb-serial.h being buried down in the source tree. This patch moves the location of the file to include/linux/usb and fixes up all of the usb serial drivers to handle the move properly. Cc: Sergei Organov <osv@javad.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-21[PATCH] USB: new cp2101 deviceVitja Makarov
By the way I have to ask you to add new (vid,pid) pair to cp2101 driver. This device is argussoft's avr in-system programmer AS3M, http://atmel.argussoft.ru/hard.htm it's based on cp2101 chip and works pretty well with the linux driver. It could be used with argussoft's `asisp1109.exe' (http://atmel.argussoft.ru/download/software/as-tools.soft/asisp.zip) tool run under wine. Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: cp2101: add new device IDsCraig Shelley
This patch adds a new device ID to the cp2101 driver Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc() conversion for rest of drivers/usbEric Sesterhenn
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: cp2101 Add new device IDsCraig Shelley
The attached patch adds four new device IDs for the CP2101 driver. Also 3 tab characters have been removed from device ID table. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: remove .owner field from struct usb_driverGreg Kroah-Hartman
It is no longer needed, so let's remove it, saving a bit of memory. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: allow usb drivers to disable dynamic idsGreg Kroah-Hartman
This lets drivers, like the usb-serial ones, disable the ability to add ids from sysfs. The usb-serial drivers are "odd" in that they are really usb-serial bus drivers, not usb bus drivers, so the dynamic id logic will have to go into the usb-serial bus core for those drivers to get that ability. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-17[PATCH] USB: cp2101.c: Jablotron usb serial interface identificationJosef Balatka
Jablotron usb serial interface identification Signed-off-by: Josef Balatka <balatka@email.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] USB Serial: move name to driver structureGreg Kroah-Hartman
This fixes up a lot of problems in sysfs with some of the usb serial drivers, they had incorrect driver names. Also saves a tiny ammount of memory. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] USB Serial: get rid of the .owner field in usb_serial_driverGreg Kroah-Hartman
Don't duplicate something that's already in struct driver. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] USB Serial: rename usb_serial_device_type to usb_serial_driverGreg Kroah-Hartman
I'm tired of trying to explain why a "device_type" is really a driver. This better describes exactly what this structure is. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: CP2101 New Device IDsCraig Shelley
Three new device IDs for CP2101 USB to UART Bridge Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03[PATCH] USB: CP2101 Add support for flow controlCraig Shelley
Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!