aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2006-09-28USB: add SeaLevel 2106 SeaLINK support to ftdi_sioJustin Carlson
We have a couple of these USB-Serial converters around; they're slightly different from the 2104 models in that they can handle 500Kb/sec over RS422. The existing ftdi driver seems to work just fine if we add in the appropriate IDs. Patch is against 2.6.17.6, but should apply cleanly to pretty much anything recent. From: Justin Carlson <justinca@qatar.cmu.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: another device ID for ipaqMatthias Urlichs
Add yet another device ID to the ipaq USB-serial driver. Signed-Off-By: Matthias Urlichs <matthias@urlichs.de> Cc: Ganesh Varadarajan <ganesh@veritas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB serial ftdi_sio: Add support for Tactrix OpenPort devicesIan Abbott
This patch adds support for three OpenPort ECU data cables from Tactrix Inc. to the ftdi_sio driver's device ID table. One of the PIDs was supplied by Donour Sizemore on the ftdi-usb-sio-devel mailing list. The other two were added by myself after examining the Windows driver software. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: Add vendor / product ID to pl2303Wesley PA4WDH
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: Airprime driver improvements to allow full speed EvDO transfersAndy Gay
Adapted from an earlier patch by Greg KH <gregkh@suse.de>. That patch added multiple read urbs and larger transfer buffers to allow data transfers at full EvDO speed. This version includes additional device IDs and fixes a memory leak in the transfer buffer allocation. Some (maybe all?) of the supported devices present multiple bulk endpoints, the additional EPs can be used for control and status functions, This version allocates 3 EPs by default, that can be changed using the 'endpoints' module parameter. Tested with Sierra Wireless EM5625 and MC5720 embedded modules. Device ID (0x0c88, 0x17da) for the Kyocera Wireless KPC650/Passport was added but is not yet tested. From: Andy Gay <andy@andynet.net> Cc: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27usb serial: support Alcor Micro Corp. USB 2.0 TO RS-232 through pl2303 driverJohannes Steingraeber
Patch to add support for Alcor Micro Corp. USB 2.0 TO RS-232 converter. This patch adds VID and PID to pl2303.[ch], adds it to the "HORRIBLE HACK FOR PL2303" in usb-serial.c and also prevents cdc-acm to claim driving this device by blacklisting it in hid-core. Signed-off-by: Johannes Steingraeber <Jo_Stein@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: Moschip 7840 USB-Serial DriverPaul B Schroeder
Signed-off-by: Paul B Schroeder <pschroeder@uplogix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27aircable: fix printk format warningsRandy Dunlap
Fix printk format warnings: drivers/usb/serial/aircable.c:221: warning: format ‘%Zd’ expects type ‘signed size_t’, but argument 4 has type ‘int’ drivers/usb/serial/aircable.c:283: warning: format ‘%Zd’ expects type ‘signed size_t’, but argument 4 has type ‘int’ Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27Add AIRcable USB Bluetooth Dongle DriverManuel Francisco Naranjo
Add driver for AIRcable USB Bluetooth dongle. Signed-off-by: Naranjo, Manuel Francisco <naranjo.manuel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27cypress_m8: implement graceful failure handlingMike Isely
When receiving a fatal error from the USB core, e.g. EILSEQ (which can happen if the polling interval is too short), fail gracefully. Previously the driver would fill the log with useless error messages or (more alarmingly) silently spin forever trying to write updated control information to the device. This change implements a new flag which if cleared indicates that the driver has failed. The flag will be set on initialization, cleared on fatal errors, and anything else that touches the USB port in the driver will abort if the flag is clear. When the flag is cleared, a message will be logged indicating that the driver has failed. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27cypress_m8: improve control endpoint error handlingMike Isely
Fix usb core function error return checks to look for negative errno values, not positive errno values. This bug had rendered those checks useless. Also remove attempted error recovery on control endpoints for EPIPE - with control endpoints EPIPE does not indicate a halted endpoint so trying to recover with usb_clear_halt() is not the correct action. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27cypress_m8: use usb_fill_int_urb where appropriateMike Isely
Rather than directly filling in URB fields, it's safer to use usb_fill_int_urb(). This improves robustness of the driver; URB changes in the future will not go uninitialized here. That point not withstanding, this driver should at least be self-consistent. Either use usb_fill_int_urb() everywhere or don't bother with it all. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27cypress_m8: use appropriate URB polling intervalMike Isely
The polling interval for the device can't always be 1msec. If it is too quick, the device can fail causing a fatal (to the driver) EILSEQ error from the USB core. The actual correct value is reported by the device as part of its configuration data, so use that value as the default. On a DeLorme Earthmate for example, the device reports that it wants a 6msec interval. As part of this fix, the "interval" module option has been fixed as well; the device's default can be overridden by specifying interval=<value> as a module option. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: fix __must_check warnings in drivers/usb/serial/Greg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: usb-serial: Use usb_endpoint_* functions.Luiz Fernando N. Capitulino
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: garmin_gps support for new generation of gps receiversHermann Kneissel
The attached patch adds support for the new generation of gps receivers (eg. GPSmap 60Cx) to garmin_gps.c. Signed-off-by: Hermann Kneissel <herkne@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: ipaq: minor ipaq_open() cleanup.Luiz Fernando N. Capitulino
Commit b512504e5671f83638be0ddr085c4b1832f623d3 made ipaq_open() a bit messy by moving the read urb submission far from its usb_fill_bulk_urb() call and the comment explaining what it does. This patch put they together again. Although only compiled tested, should not break the fix introduced by b512504e5671f83638be0ddr085c4b1832f623d3, of course. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: pl2303: cosmetic changes to quirkThiago Galesi
Cosmetic changes to quirk in pl2303_update_line_status Signed-off-by: Thiago Galesi <thiagogalesi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: pl2303: reduce number of prototypesThiago Galesi
Reduce number of needed prototypes in Prolific pl2303 driver Signed-off-by: Thiago Galesi <thiagogalesi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: pl2303: cosmetic changes to pl2303_buf_{clear, data_avail}Thiago Galesi
Changes the functions pl2303_buf_clear and pl2303_buf_data_avail for the purpose of keeping them under the 80 column limit, making them more similar to similar functions and making then simpler. Signed-off-by: Thiago Galesi <thiagogalesi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: pl2303: remove 80-columns limit violations in pl2303 driverThiago Galesi
Fixes several lines that overrun 80 columns in Prolific pl2303 driver and cleans up some space usages in the function calls. Signed-off-by: Thiago Galesi <thiagogalesi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: pl2303: Removes unneeded goto.Luiz Fernando N. Capitulino
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: ark3116: Formatting cleanupsWerner Lemberg
Formatting only. Signed-off-by: Werner Lemberg <wl@gnu.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: ark3116: Add TIOCGSERIAL and TIOCSSERIAL ioctl calls.Werner Lemberg
Add (dummy?) support for TIOCGSERIAL and TIOCSSERIAL ioctl calls to the USB serial driver file `ark3116.c'. This is sufficient for me to run wvdial successfully, receive my email, and do webbrowsing with firefox. On the other hand, running the cvs program to update archives seems not to work, and the traceroute command sometimes says send failed: No buffer space available Looks like a buffering problem... My knowledge of serial device drivers is zero, so I can't fix this -- I just did a cut'n'paste from other USB serial drivers... Signed-off-by: Werner Lemberg <wl@gnu.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-12usbserial: Reference leakMatthias Urlichs
A sufficiently-large number of USB serial devices causes a reference leak when /proc/tty/drivers/usbserial is read. Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-07USB: New device ID for ftdi_sio usb serial driverRalf Schlatterbeck
The patch adds a new device ID for the Gamma Scout Geiger counter device. Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-26[PATCH] USB: pl2303: removed support for OTi's DKU-5 clone cableTomasz Kazmierczak
This patch removes support for a clone of Nokia DKU-5 cable made by Ours Technology Inc, as it turned out that the cable does not use the pl2303 chip, but OTI-6858 chip which is not compatible with the pl2303. Signed-off-by: Tomasz Kazmierczak <tomek.fizyk@op.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: ftdi_sio driver - new PIDsJonathan Davies
Signed-off-by: Jonathan Davies <jjd27@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: Additional PID for SHARP W-ZERO3Norihiko Tomiyama
I write a patch for ipaq.c. Would you like to add upstream tree ? This patch enables a support of "SHARP W-ZERO3(WS004SH)" and "SHARP W-ZERO3[es](WS007SH)". From: Norihiko Tomiyama <norihiko.tomiyama@ctc-g.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: New USB ID for Belkin Serial AdapterKim Oldfield
Can you add the USB IDs for the Belkin USB Serial adapter (P/N F5U257) to the pl2303 driver in the Linux Kernel? Are you the appropriate person to approach for this? I recently purchased a Belkin USB Serial adapter (P/N F5U257) and found that it didn't work. After a bit of experimentation I found that it works with the pl2303 driver once the ID has been added. See attached patch to fix this. Also attached is the output from lsusb -v just in case you require any information from there. From: Kim Oldfield <luv@oldfield.wattle.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Additional PID for the ftdi_sio driverDave Platt
Here's a short patch which adds one PID to the set of devices supported by the ftdi_sio driver. The device in question is a DLP module used as part of a ham radio USB-to-packet adapter. From: Dave Platt <dplatt@radagast.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: adding support for SHARP WS003SH to ipaq.cNorihiko Tomiyama
This small patch enables a support of "SHARP WS003SH". "SHARP WS003SH" (usullary called "W-ZERO3") is most polular All-in-one handheld CellPhone-plus-WindowsMobile5.0 in Japan. "SHARP WS003SH" has two modes, "Modem" and "ActiveSync". But, "ActiveSync" mode uses NDIS connection. Therefore, ipaq.c can only support "Modem" mode. http://www.sharp.co.jp/ws/ (Japanese Site) http://greggman.com/edit/editheadlines/2005-12-24.htm From: Norihiko Tomiyama <norihiko.tomiyama@ctc-g.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Removed 3-port device handler from Option driverMatthias Urlichs
Dead code. From: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Drop Sierra Wireless MC8755 from the Option driverMatthias Urlichs
This device is now supported by sierra.c. From: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Let option driver handle Anydata CDMA modems. Remove anydata driver.Matthias Urlichs
Signed-off-by: Jon K Hellan <hellan@acm.org> Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Option driver: Short driver names were identicalMatthias Urlichs
The short driver names were not unique, which prevented the driver from actually loading. Also, one of the ioctl pointers was missing. Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Option driver: removed change history and linux/version.h includeMatthias Urlichs
Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: move usb-serial.h to include/linux/usb/Greg Kroah-Hartman
USB serial outside of the kernel tree can not build properly due to usb-serial.h being buried down in the source tree. This patch moves the location of the file to include/linux/usb and fixes up all of the usb serial drivers to handle the move properly. Cc: Sergei Organov <osv@javad.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: Anydata: Fixes wrong URB callback.Luiz Fernando N. Capitulino
Anydata is using usb_serial_generic_write_bulk_callback() for its read URB, but it should use usb_serial_generic_read_bulk_callback() instead (it's a read URB, isn't it?). Reported by Jon K Hellan <hellan@acm.org>. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: Add one VID/PID to ftdi_sioColin Leroy
This patch adds the Testo USB interface to the list of devices recognized by the ftdi_sio module. This device is based on a FT232BL chip, and is used as an interface to get data from digital sensors (thermometer, etc). See http://www.testo.com/ Signed-off-by: Colin Leroy <colin@colino.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: Option driver: new product IDMatthias Urlichs
Yet another "same name, somewhat different hardware" product. Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: ipw.c driver fixBart Oldeman
The below patch fixes the ipw module in kernel 2.6.17 for me; without this change it simply does not work at all (all but the first writes are refused because write_urb_busy is always 1). This problem was there in 2.6.15 as well, but at that point I used the (updated) ipw.c, version 0.4, from http://www.neology.co.za/products/opensource/ipwireless/ which no longer compiles with 2.6.17. It can be made to after a few changes but obviously it's easier if the built-in ipw driver works instead of having to download one from the neology site. From: Bart Oldeman <bartoldeman@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: ipaq.c timing parametersFrank Gevaerts
Adds configurable waiting periods to the ipaq connection code. These are not needed when the pocketpc device is running normally when plugged in, but they need extra delays if they are physically connected while rebooting. There are two parameters : * initial_wait : this is the delay before the driver attemts to start the connection. This is needed because the pocktpc device takes much longer to boot if the driver starts sending control packets too soon. * connect_retries : this is the number of times the control urb is retried before finally giving up. The patch also adds a 1 second delay between retries. I'm not sure if the cases where this patch is useful are general enough to include this in the kernel. Signed-off-by: Frank Gevaerts <frank.gevaerts@fks.be> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: ipaq.c bugfixesFrank Gevaerts
This patch fixes several problems in the ipaq.c driver with connecting and disconnecting pocketpc devices: * The read urb stayed active if the connect failed, causing nullpointer dereferences later on. * If a write failed, the driver continued as if nothing happened. Now it handles that case the same way as other usb serial devices (fix by Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>) Signed-off-by: Frank Gevaerts <frank.gevaerts@fks.be> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: add driver for non-composite Sierra Wireless devicesKevin Lloyd
This patch creates a new driver, sierra.c, that supports the new non-composite Sierra Wireless WWAN devices. The older Sierra Wireless and Airprime devices are supported in airprime.c. Signed-off-by: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB serial ftdi_sio: Prevent userspace DoSIan Abbott
This patch limits the amount of outstanding 'write' data that can be queued up for the ftdi_sio driver, to prevent userspace DoS attacks (or simple accidents) that use up all the system memory by writing lots of data to the serial port. The original patch was by Guillaume Autran, who in turn based it on the same mechanism implemented in the 'visor' driver. I (Ian Abbott) re-targeted the patch to the latest sources, fixed a couple of errors, renamed his new structure members, and updated the implementations of the 'write_room' and 'chars_in_buffer' methods to take account of the number of outstanding 'write' bytes. It seems to work fine, though at low baud rates it is still possible to queue up an amount of data that takes an age to shift (a job for another day!). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB serial visor: fix race in open/closeIan Abbott
The anti user-DoS mechanism in the USB serial 'visor' driver can fail in the following way: visor_open: priv->outstanding_urbs = 0 visor_write: ++priv->outstanding_urbs visor_close: visor_open: priv->outstanding_urbs = 0 visor_write_bulk_callback: --priv->outstanding_urbs So priv->outstanding_urbs ends up as (unsigned long)(-1). Not good! I haven't seen this happen with the visor driver as I don't have the hardware, but I have seen it while testing a patch to implement the same functionality in the ftdi_sio driver (patch not yet submitted). The fix is pretty simple: don't reinitialize outstanding_urbs in visor_open. (Again, I haven't tested the fix in visor, but I have tested it in ftdi_sio.) Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: Support for Susteen Datapilot Universal-2 cable in pl2303Matthew Meno
The Susteen Datapilot cable (http://www.susteen.com/productdetail/71/producthl/Notempty) has an internal pl2303 to communicate with a set of dummy connector-ends that connect to a variety of cell phones. I've found that it works right out of the box by simply adding the product/vendor id to the pl2303 driver. Signed-off-by: Matt Meno <mmeno@idealcorp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: fix visor leaksPete Zaitcev
This patch fixes blatant leaks in visor driver and makes it report mode sensible things in ->write_room (this is only needed if your visor is a terminal though). It is made to fit into 80 columns with a temporary variable. Might even save a few instructions... Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: fix usb-serial leaks, oopses on disconnectPete Zaitcev
This fix addresses two issues: - Unattached port structures were not freed - My initial fix for crash when eventd runs a work in a freed port did not go far enough Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 23:13:13 +0000