aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2007-03-19airprime: USB ID for Novatel EV620 mini PCI-E cardMark Glines
Add an ID to recognise the Novatel EV620 wireless adapter. http://www.novatelwireless.com/products/expedite/ev620.html It looks like a mini PCI-Express adapter. The mPCIE connector includes USB pins... the card shows up to the system as a USB device, and powers itself from the PCI bus. The card I have isn't activated yet, so I can't get a PPP session up yet, but I have tested basic serial communication successfully in both 2.6.18 and 2.6.20 kernels, once the product ID was added. (the driver changed quite a bit between the two revs.) In both drivers, it responds to AT commands and such. Signed-off-by: Mark Glines <mark@glines.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-19USB: necessary update for mos7720 driverOliver Neukum
these devices have a shared interrupt endpoint. For serialcore to pass an interrupt endpoint to a subdriver, the subdriver must define and _export_ a fitting callback. The mos7720 driver failed to do so. This led invariably to an oops upon open. This patch fixes it. The driver is useless without it. Please try to get this into 2.6.21 and the stable kernels that have this driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-19USB: fix usb-serial regressionJim Radford
This patch reverts d9a7ecacac5f8274d2afce09aadcf37bdb42b93a since it breaks drivers that need to access the ->port[] array in shutdown (most of them). Signed-Off: Jim Radford <radford@blackbean.org> Acked-by: Mark Lord <mlord@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: Product ID for FT232RL in ftdi_sioGard Spreemann
Here is a patch adding the PID for the FT232RL to ftdi_sio. The patch generates a warning during compilation because get_ftdi_divisor doesn't explicitly handle the FT232RL with this patch, so I guess you don't want to use it in its current state. It is all I could come up with with the knowledge I have of the drivers at the moment, though, and I hope you can have some use for it at least. It works fine with my DLP-TILT with an FT232RL. From: Gard Spreemann <spreeman@stud.ntnu.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: ipaq.c: Additional devicesAndre Spahlinger
Additional devices Signed-off-by: Andre Spahlinger <uenz@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: further fix for usb-serialOliver Neukum
this is a fix for the outstanding usb-serial issues. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: fix usb-serial device naming bugOliver Neukum
Am Montag, 26. Februar 2007 15:16 schrieb Craig Schlenter: > Hi Greg > > 34ef50e5b1f96c2d8c0f3d28b7d407743806256c is definitely > the source of the problem. Reverting that makes the > ftdi port show up as ttyUSB0 again for me and it > can actually be opened. This patch should fix the issue. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Craig Schlenter <craig@codefountain.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: RTS/DTR signal patch for airprime driverMartin Schiller
I encountered some problems with the airprime driver in use with a Novatel Merlin XU870: Closing an open Connection to e.g. /dev/ttyUSB0 doesn't reset the RTS/DTR lines of the Modem. Consequently, when I use minicom to establish a connection by "ATD*99#" the modem doesn't hang up even if i exit minicom and so I cannot reuse the modem unless I remove it and plug it in again. With the attached patch, the RTS/DTR lines are resetted on a close. The code was mainly taken from the option.c driver.
2007-03-09USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the ↵Jim Radford
latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09usb-serial: fix shutdown / device_unregister orderJim Radford
Ensure that the ->port_remove() callbacks get called before the ->shutdown() callback which makeing the order symmetric with ->attach() being called before ->port_probe(). Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: add Additional PIDs in ftdi_sioThomas Schleusener
I've developed some devices with FTDI chips (FT232xx). FTDI was so kind to give some own PID's which I can use together with their VID. Some of the devices are already very popular here and I have customers from universities, institutes ..... I use the FTDI VID 0x0403. My PID's are: 0xff38 - IBS US485 (USB<-->RS422/485 interface) 0xff39 - IBS PIC-Programmer 0xff3a - IBS Card reader for PCMCIA SRAM-cards 0xff3b - IBS PK1 - Particel counter 0xff3c - IBS RS232 - Monitor 0xff3d - APP 70 (dust monitoring system) 0xff3e - IBS PEDO-Modem (RF modem 868.35 MHz) 0xff3f - future device The company is "IBS Ing.-Buero Schleusener". From: Thomas Schleusener <thomas@be-schl.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: add QL355P power supply ids to fdti_sioMichael Olberg
2007-03-09USB: New device IDs for cp2101 driverJon K Hellan
Here are two new device IDs for the cp2101 driver. The diff is with linus's tree as of this evending. From: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: ftdi_sio: Adding VID and PID for TellstickMicke Prag
I would like to add the VID and PID for Telldus Technologies Homeautomation usb-dongle to the ftdi_sio driver. From: Micke Prag <micke.prag@telldus.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: option: add a bunch of new device idsGreg Kroah-Hartman
This adds all of the known Option device ids to the driver. Many thanks to some Option engineers for getting me this list. Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: option: remove duplicate device id tableGreg Kroah-Hartman
There is no need to have two tables with the same device ids in it. Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16USB: another id for cp2101 driverPozsar Balazs
This patch adds another usb id to the cp2101. It seems to work well. Please apply, thanks. Signed-off-by: Pozsar Balazs <pozsy@uhulinux.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16usb: Remove Airprime device from option.cKevin Lloyd
from: Kevin Lloyd <linux@sierrawireless.com> This patch removes the Airprime 5220 device (branded as Audiovox) from the option.c driver. This device is already supported by the sierra.c driver. This was based off of the option.c driver found in kernel 2.6.20-git11. Signed-off-by: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16USB: Fix error cleanup path in airprimePete Zaitcev
Fix up the error processing path: in usb_submit_urb failed, we forgot to free buffers. Also, don't free buffers in read callback: less error prone, 21 LOC less, no need to comment so much. N.B. write path is ok to do kfree. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16USB: add flow control to usb-serial generic driver.Joris van Rantwijk
I added two fields to struct usb_serial_port to keep track of the throttle state. Other usb-serial drivers typically use private data for such things, but the generic driver can not really do that because some of its code is also used by other drivers (which may have their own private data needs). As it is, I am not sure that this patch is useful in all scenarios. It is certainly helpful for low-bandwidth devices that can hold their data in response to throttling. But for devices that pump data in real-time as fast as possible (webcam, A/D converter, etc), throttling may actually cause more data loss. From: Joris van Rantwijk <jorispubl@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16USB: PL2303: Willcom WS002IN Support.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-11[PATCH] Char: tty_wakeup cleanupJiri Slaby
tty_wakeup cleanup - remove wake_up_interruptible(&tty->write_wait) surrounding tty_wakup(tty); - substitute tty->ldisc.write_wakeup(tty) + wake_up() by tty_wakeup(tty); Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09[PATCH] trivial usb endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-07USB: remove duplicate device id from keyspanGreg Kroah-Hartman
As pointed out by Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: remove duplicate device id from ftdi_sioGreg Kroah-Hartman
As pointed out by Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: remove duplicate device id from visorGreg Kroah-Hartman
As pointed out by Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Sierra Wireless auto set D0Kevin Lloyd
This patch ensures that the device is turned on when inserted into the system. It also adds more VID/PIDs and matches the N_OUT_URB with the airprime driver. Signed-off-by: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: race fixes for usb-serial, step 3Oliver Neukum
- fix an error code returned if a device has been disconnected Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: race fixes for usb-serial, step 2Oliver Neukum
- take BKL before looking up a driver to associate with a device to make sure the module is not unloaded after looking up but before association & bumping module count Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: race fixes for usb-serial step 1Oliver Neukum
- introduce a spinlock for serial_table to eliminate the window between looking up a device and getting a reference - delay inscription of a new device into serial_table until it is fully initialised - make sure disconnect() kills all URBs to avoid leckage across a soft unbind Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07fix for bugzilla #7544 (keyspan USB-to-serial converter)Rainer Weikusat
At least the Keyspan USA-19HS USB-to-serial converter supports two different configurations, one where the input endpoints have interrupt transfer type and one where they are bulk endpoints. The default UHCI configuration uses the interrupt input endpoints. The keyspan driver, OTOH, assumes that the device has only bulk endpoints (all URBs are initialized by calling usb_fill_bulk_urb in keyspan.c/ keyspan_setup_urb). This causes the interval field of the input URBs to have a value of zero instead of one, which 'accidentally' worked with Linux at least up to 2.6.17.11 but stopped to with 2.6.18, which changed the UHCI support code handling URBs for interrupt endpoints. The patch below modifies to driver to initialize its input URBs either as interrupt or as bulk URBs, depending on the transfertype contained in the associated endpoint descriptor (only tested with the default configuration) enabling the driver to again receive data from the serial converter. Greg K-H reworked the patch. Signed-off-by: Rainer Weikusat <rweikusat@sncag.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Bugfix for aircable: Add module and name to usb_serial_driverJohannes Hölzl
While adding the dynamic-id support to usb serial I found a small bug in the air cable driver: Adds module and name information to the usb_serial_driver instance of aircable. So the aircable driver is correctly shown under /sys/bus/usb-serial/drivers/aircable and has the module link. Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB serial: add driver pointer to all usb-serial driversJohannes Hölzl
Every usb serial driver should have a pointer to the corresponding usb driver. So the usb serial core can add a new id not only to the usb serial driver, but also to the usb driver. Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag no_dynamic_id=1. This is added now. Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB serial: add dynamic id support to usb-serial coreGreg Kroah-Hartman
Thanks to Johannes Hölzl <johannes.hoelzl@gmx.de> for fixing a few things and getting it all working properly. This adds support for dynamic usb ids to the usb serial core. The file "new_id" will show up under the usb serial driver, not the usb driver associated with the usb-serial driver (yeah, it can be a bit confusing at first glance...) This patch also modifies the USB core to allow the usb-serial core to reuse much of the dynamic id logic. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
2007-02-07USB: add EPIC support to the io_edgeport driverGreg Kroah-Hartman
This patch adds EPiC support to the io_edgeport driver which adds support for a number of NCR printers: - NCR (Axiohm) 7401-K580 printer - NCR (TEC) 7401-K590 printer, 7402-K592 - NCR (TEC) 7167, 7168 printers - NCR (TEC) 7197, 7198, F306, F307, F309 printers - NCR (Axiohm) 7194 printer - NCR (Axiohm) 7158 printer and a few more. It is based on the 2.6.19 kernel. Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2007-01-23[PATCH] funsoft: ktermios fixAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-22USB: add vendor/device id for Option GT Max 3.6 cardsgarrett_damore@tadpole.com
This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7814 Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-11[PATCH] really fix funsoft driverDavid Miller
Fix void cast and re-enable on sparc. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05USB: funsoft is borken on sparcAndrew Morton
drivers/usb/serial/funsoft.c: In function `funsoft_ioctl': drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_iflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_iflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_iflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_oflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_oflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_oflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_lflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_lflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_lflag' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_line' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_line' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_line' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' drivers/usb/serial/funsoft.c:35: warning: dereferencing `void *' pointer drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: error: request for member `c_cc' in something not a structure or union drivers/usb/serial/funsoft.c:35: warning: type defaults to `int' in declaration of `type name' Cc: David Clare <david@funsoft.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-05USB: fix interaction between different interfaces in an "Option" usb deviceMiguel Angel Alvarez
Just the serial port in the first interface should control DTR and RTS lines. This way, the closing of the rest of the ports does not produce a= hangup in the communication. Signed-off-by: Miguel Angel Alvarez <ma.alvarez@ziv.es> Signed-off-by: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20[PATCH] usb serial: add support for Novatel S720/U720 CDMA/EV-DO modemsEric Smith
Add USB vendor/device IDs for Novatel Wireless S720 and U720 CDMA/EV-DO modems to airprime.c. Signed-off-by: Eric Smith <eric@brouhaha.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20usb-gsm-driver: Added VendorId and ProductId for Huawei E220 USB ModemJohann Wilhelm
Added VendorId and ProductId for Huawei E220 USB Modem Signed-off-by: Johann Wilhelm <johann.wilhelm@student.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20USB: Prevent the funsoft serial device from entering raw modeDavid Clare
Added a device specific ioctl function to prevent the disabling of canonical mode. EINVAL is returned for any TCSETSF ioctl that doesn't have ICANON set. This patch is for 2.6.17 or later kernels. When "hwinfo --modem" is executed it opens the funsoft USB serial device and disables canonical mode. The device is kept this way until hwininfo has finished probing any modems on a system. The funsoft device expects to be running in canonical mode. Switching the device to raw mode can cause incomplete data packets and device timeouts. Signed-off-by: David Clare <david@funsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20Add Baltech Reader ID to CP2101 driverJohannes Hoelzl
this patch adds the Baltech Reader ID to the list of USB IDs in the CP2101 driver. From: Johannes Hoelzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20usb serial: Eliminate bogus ioctl codeAlan
Several drivers have bogus ioctl code that tries unneccessarily to override the standard processing. In the three cases here the actual code is not only wrong but also not required as they implement the proper set_termios method as well. Remove the junk. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20USB: ftdi_sio - MachX product ID addedJan Capek
below is a patch for the ftdi_sio driver to include a new device ID for CCS MachX PIC programmer. From: Jan Capek <jan@ccsinfo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20USB: airprime: add device id for dell wireless 5500 hsdpa cardEagle Jones
Added the device id (0x413c, 0x8115) for the Dell wireless HSDPA 5500, which is a rebranded Novatel EU730. Signed-off-by: Eagle Jones <eagle@newdream.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-13[PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] tty: switch to ktermiosAlan Cox
This is the grungy swap all the occurrences in the right places patch that goes with the updates. At this point we have the same functionality as before (except that sgttyb() returns speeds not zero) and are ready to begin turning new stuff on providing nobody reports lots of bugs If you are a tty driver author converting an out of tree driver the only impact should be termios->ktermios name changes for the speed/property setting functions from your upper layers. If you are implementing your own TCGETS function before then your driver was broken already and its about to get a whole lot more painful for you so please fix it 8) Also fill in c_ispeed/ospeed on init for most devices, although the current code will do this for you anyway but I'd like eventually to lose that extra paranoia [akpm@osdl.org: bluetooth fix] [mp3@de.ibm.com: sclp fix] [mp3@de.ibm.com: warning fix for tty3270] [hugh@veritas.com: fix tty_ioctl powerpc build] [jdike@addtoit.com: uml: fix ->set_termios declaration] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Acked-by: Peter Oberparleiter <oberpar@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove SLAB_ATOMICChristoph Lameter
SLAB_ATOMIC is an alias of GFP_ATOMIC Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>