aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2007-10-14signedness: module_param_array nump argumentAl Viro
... should be unsigned int Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12USB: serial core should respect driver requirementsAlan Stern
This patch (as997) fixes a bug in the USB serial core. The core needs to pay attention to drivers' requirements regarding the number and type of endpoints a device has. At the same time, the patch changes the NUM_DONT_CARE constant (which is stored in a single-byte field) from -1 to a safer, unsigned value. It also improves the kerneldoc for several fields in the usb_serial_driver structure. Finally, the patch replaces a list_for_each() with list_for_each_entry(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: Adding support for SHARP WS011SH to ipaq.cNobuhiro Iwamatsu
This patch supports for SHARP WS011SH[0] to ipaq.c [0]: http://www.willcom-inc.com/ja/lineup/ws/011sh/index.html (Sorry , Japanese only.) Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: funsoft: Fix termiosAlan Cox
Funsoft has a bogus ioctl handler doing bogus termios handling in a bogus manner. Fortunately we can simply delete all the bogus bits and get the right default behaviour ! Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: visor: termios bitsAlan Cox
Visor has a huge complex routine which displays termios bits for debug but doesn't do anything. Get the correct behaviour by removing it all Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: usb/serial/ch341.c: make 4 functions staticAdrian Bunk
This patch makes four needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: Driver for CH341 USB-serial adaptorFrank A Kingswood
This patch implements a USB serial port driver for the Winchiphead CH341 USB-RS232 Converter. This chip also implements an IEEE 1284 parallel port, I2C and SPI, but that is not supported by the driver. Signed-off-by: Frank A Kingswood <frank@kingswood-consulting.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: cp2101.c: add additional device IDEdouard Lafargue
This patch adds an additional device ID to the cp2101 USB serial driver. This device is a Gemalto Prox-PU or CU contactless card reader (ISO14443-A/B and Mifare). The reader is a standard Gemalto serial proximity reader using the Gemalto Block Protocol (see reader's documentation) bundled with a built-in CP2102 for serial/USB conversion. Signed-off-by: Edouard Lafargue (edouard@lafargue.name) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: fix double frees in error code paths of ipaq driverOliver Neukum
the error code paths can be enter with buffers to freed buffers. Serial core would do a kfree() on memory already freed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: fix errornous assumption in the usb serial framework revealed by ↵Oliver Neukum
iuu_phoenix the iuu_phoenix driver submits another URB from a completion handler. This dictates a certain order of calls to usb_kill_urb() in kill_traffic(). As other drivers may do it the other way round, we need to use both orders in kill_traffic(). This patch does so and should be merged before iuu_phoenix is merged. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12usb: serial/pl2303: support for BenQ Siemens Mobile Phone EF81Andreas Loibl
This patch adds support for the BenQ Mobile Phone EF81 to pl2303 Signed-off-by: Andreas Loibl <andreas@andreas-loibl.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12usb: avoid redundant cast of kmalloc() return value in OTi-6858 driverJesper Juhl
In drivers/usb/serial/oti6858.c::pl2303_buf_alloc() the return value of kmalloc() is being cast to "struct pl2303_buf *", but that need not be done here since kmalloc() returns "void *". Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12usb-serial: show port number in sysfsRoman Kagan
Some usb-serial devices (e.g. certain Edgeport models) have more than one serial port on the same USB device/interface. Currently the only way to distinguish these ports in userspace is by their minor device number: the driver makes them consecutive and in stable order. However, for the purpose of stable naming with udev this is insufficient: when udev handles the ADD event for one of the ports it doesn't know what minor number the other one has. To make stable naming easier, export the port number via sysfs. Signed-off-by: Roman Kagan <rkagan@sw.ru> Signed-off-by: Dmitry Guryanov <dimak@dgap.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: kobil_sct: Rework driverAlan Cox
No hardware but this driver is currently totally broken so we can't make it much worse. Remove all tbe broken invalid termios handling and replace it with a proper set_termios method. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: cp2101: Coding style policeAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: ftdi_sio: Handle FT232RL devices like FT232BM devicesAndrew M. Bishop
Handle the FT232RL device type in exactly the same way as FT232BM devices (FT232RL detection was added around kernel 2.6.20 but not code for handling it). Signed-off-by: Andrew M. Bishop <amb@gedanken.demon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: ark3116.c: fix check-after-useAdrian Bunk
The Coverity checker spotted that we'd have already oops'ed if one of these was NULL. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: mct_u232-convert-to-proper-speed-handling-api-fixAndrew Morton
Make Pete happy Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: kl5kusb105: witch to new speed APIAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: Remove dead references to "SAFE_SERIAL" CONFIG variables.Robert P. J. Day
Remove the references to CONFIG_USBD_SAFE_SERIAL_{VENDOR,PRODUCT}, which aren't defined in any Kconfig file. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-11USB: drivers/usb/serial/bus.c: Fix incompatible pointer type warningSatyam Sharma
drivers/usb/serial/bus.c: In function usb_serial_bus_deregister: drivers/usb/serial/bus.c:185: warning: passing argument 1 of free_dynids from incompatible pointer type Above build warning comes when CONFIG_HOTPLUG=n because argument of free_dynids() in serial/bus.c is a struct usb_serial_driver, not a struct usb_driver. This is not a runtime bug, because the function is an empty stub and never dereferences the passed pointer anyway. Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-11USB: option: Add Dell HSDPA 5520 to driverGreg Kroah-Hartman
This is based on information sent in by Christian Gothe. Cc: Christian Gothe <christian.gothe@kapelan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-11USB: option: Add a new device ID for the HUAWEI E220 HSDPA modem.Jaime Velasco Juan
Signed-off-by: Jaime Velasco Juan <jaime@singular.local> CC: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-11USB: ftdi_sio: add of a new product/manufacturer, TMLPierre Castella
I have added to a new product based on the FTDI 232R USB/Serial transceiver, which is commercialized by The Mobility Lab. Here is a trivial patch enclosed, against 2.6.22.6 kernel. Signed-off-by: Pierre Castella <pp.castella@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-11USB: oti6858: Remove broken ioctl code in -mm tree and also the broken fixesAlan Cox
This stuff is simply not needed. Signed-off-by: Alan Cox <alan@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: Adding support for HTC Smartphones to ipaqChristian Heim
This patch enables support for HTC Smartphones. The original patch is at https://bugs.gentoo.org/show_bug.cgi?id=187522. Original author is Mike Doty <kingtaco@gentoo.org>. Signed-off-by: Christian Heim <phreak@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22usb-serial: fix oti6858.c segfault in termios handlingThomas Viehmann
The oti6858 usb serial driver should use kernel_termios_to_user_termios/ user_termios_to_kernel_termios to avoid segfaults because the kernel uses a structure differing from that of user space with a different size. Signed-off-by: Thomas Viehmann <tv@beamnet.de> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: belkin_sa: avoid divide by zero errorAndy Green
The belkin_sa module has a problem coping with a 0 return from tty_get_baud_rate() -- the subsequent BELKIN_SA_BAUD macro drivers/usb/serial/belkin_sa.h:#define BELKIN_SA_BAUD(b) (230400/b) performs a divide with it leading to the following divide error: usb 3-1: Belkin / Peracom / GoHubs USB Serial Adapter converter now attached to ttyUSB0 PM: Adding info for No Bus:usbdev3.3_ep81 PM: Adding info for No Bus:usbdev3.3_ep01 PM: Adding info for No Bus:usbdev3.3_ep82 divide error: 0000 [#1] SMP Modules linked in: vfat fat iwl3945 mac80211 cfg80211 belkin_sa usbserial usb_storage autofs4 vmnet(P) vmmon(P) aes nf_conntrack_netbios_ns ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink xt_tcpudp iptable_filter ip_tables x_tables cpufreq_ondemand acpi_cpufreq video output sbs button dock battery ac arc4 snd_hda_intel ecb blkcipher snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss sr_mod snd_mixer_oss rtc_cmos cdrom iTCO_wdt iTCO_vendor_support snd_pcm rtc_core snd_timer serio_raw b44 ssb rtc_lib parport ata_piix snd soundcore snd_page_alloc mii ata_generic sg ahci libata sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd CPU: 1 EIP: 0060:[<f8dd1747>] Tainted: P VLI EFLAGS: 00010246 (2.6.23-rc1 #1) EIP is at belkin_sa_set_termios+0x18e/0x5b9 [belkin_sa] eax: 00038400 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00038400 edi: 00001cb2 ebp: de49adb0 esp: de49ad6c ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process minicom (pid: 7306, ti=de49a000 task=eed6c3b0 task.ti=de49a000) Stack: d85c74f0 00000046 00000002 00000001 d85c74f0 d85c74f0 00000246 c887c658 00000001 00000cb0 00000001 00000084 00000000 d01b58c0 f6ba10e0 de49ade8 de49ae40 de49add0 f8e2526b d85c74b8 ca6e6dbc de49ae40 d85c746c eded72e8 Call Trace: [<c0405f35>] show_trace_log_lvl+0x1a/0x2f [<c0405fe5>] show_stack_log_lvl+0x9b/0xa3 [<c04061a5>] show_registers+0x1b8/0x289 [<c0406389>] die+0x113/0x246 [<c0622f98>] do_trap+0x8a/0xa3 [<c04068dc>] do_divide_error+0x85/0x8f [<c0622d6a>] error_code+0x72/0x78 [<f8e2526b>] serial_set_termios+0x86/0x8d [usbserial] [<c0542d33>] set_termios+0x309/0x34c [<c0542ece>] n_tty_ioctl+0x158/0x4ba [<c054030b>] tty_ioctl+0xc78/0xcd6 [<c048aea0>] do_ioctl+0x50/0x67 [<c048b100>] vfs_ioctl+0x249/0x25c [<c048b15c>] sys_ioctl+0x49/0x61 [<c0404ed2>] sysenter_past_esp+0x5f/0x99 ======================= Code: 85 c0 79 14 c7 44 24 04 67 1c dd f8 c7 04 24 d4 1e dd f8 e8 96 99 65 c7 8b 46 04 be 00 84 03 00 e8 47 11 77 c7 31 d2 89 c1 89 f0 <f7> f1 66 85 c0 89 c1 b8 01 00 00 00 0f 44 c8 8b 45 d8 85 db 8b EIP: [<f8dd1747>] belkin_sa_set_termios+0x18e/0x5b9 [belkin_sa] SS:ESP 0068:de49ad6c The small patch below should take care of this situation. Note that my kernel was tainted (vmware) but the problem will occur if tty_get_baud_rate() ever returns zero and should be taken care of. Signed-off-by: Andy Green <andy@warmcat.com> Cc: William Greathouse <wgreathouse@smva.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: Support for the Evolution Scorpion robotsSøren Hauberg
The attached (mostly trivial) patches adds support for the Evolution Scorpion Robots. Evolution Robotics supplies a patch against 2.6.8 with their software. My patch is based on their work, so I don't know if I can sign it off, or if you need some Evolution people to do this (which might be hard). The patch adds device ID's for some robots which is trivial. From: Søren Hauberg <hauberg@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Søren
2007-08-22USB: fix support for Dell Wireless Broadband (aka WWAN)Faidon Liambotis
Dell Wireless Broadband ExpressCards are rebrands of Novatel's cards. Add all of their known PCI IDs to date along with their mapping to the exact Novatel model to the Option driver which already claims to support them. Signed-off-by: Faidon Liambotis <paravoid@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: Typo: "USB_SAFE_PADDED" -> "USB_SERIAL_SAFE_PADDED".Robert P. J. Day
Fix typo in safe_serial.c to match the actual CONFIG variable. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: serial: garmin_gps: fixes package loss if used from gpsbabelHermann Kneissel
This patch contains two fixes submitted by Ondrej Palkovsky: - the 'ACK' packet is sent after the transfer of the USB packet is completed, i.e. in the write_callback function. Because the close function sends the 'abort' command, a parameter is added that allows the caller of garmin_write_bulk to specify, if the 'ack' should be propagated to the serial link or dimissed. This fixes the problem with gpsbabel, it has sent several packets that were acknowledged before they were sent to the GPS and GpsBabel closed the device - thus effectively cancelled all outstanding requests in the queue. - removed the APP_RESP_SEEN and APP_REQ_SEEN flags and changed them into counters. It evades USB reset of the gps on every device close. Signed-off-by: Hermann Kneissel <hermann.kneissel@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: visor add ACER S10 palm device idMaximilian Attems
modprobe visor vendor=0x502 product=0x1 is said to work, plus there are patch instructions for it. fixes http://bugs.debian.org/340547 see http://www.chinaitpower.com/A/2004-07-28/87909.html Signed-off-by: Maximilian Attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30usb-serial: Fix edgeport regression on non-EPiC devicesAdam Kropelin
Fix serious regression on non-EPiC edgeport usb-serial devices. Baud rate and MCR/LCR registers are not being written on these models due to apparent copy-n-paste errors introduced with EPiC support. Failure reported by Nick Pasich <Nick@NickAndBarb.net>. Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: drivers/usb/serial/sierra.c: make 3 functions staticAdrian Bunk
This patch makes three needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: fix BUG: sleeping function called from invalid context at ↵Oliver Neukum
/home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0 Clearly there's a bug in drivers/usb/serial/usb-serial.c:usb_serial_put(). It shouldn't call kref_put() while holding a spinlock. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: mct_u232: Convert to proper speed handling APIAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30digi_acceleport: Drag the driver kicking and screaming into coding styleAlan Cox
- The outbreak of acute bracketitus has been cured - The belief that brackets should have spaces everywhere likewise - Various other coding style tweaks - Use baud rates not Bfoo in the speed setup switch Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30cp2101: Remove broken termios optimisation, use proper speed APIAlan Cox
I've also enabled the commented out support for 7200, 14400, 55854, 127117 and 3686400 baud as you can now set such rates in the kernel. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: fix usb_serial_suspend(): buggy codeOliver Neukum
Am Montag 23 Juli 2007 schrieb Adrian Bunk: > Commit ec22559e0b7a05283a3413bda5d177e42c950e23 added the following > function to drivers/usb/serial/usb-serial.c: > [..] > > The Coverity checker spotted the inconsequent NULL checking for "serial". > > Looking at the code it also doesn't seem to have been intended to always > return 0. Coverity is right. The check for NULL is wrongly done and the error return is lost. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: Remove pointless conditional in drivers/usb/serial/io_ti.c::edge_shutdown()Jesper Juhl
Coverity scan found (CID: 1708) this in drivers/usb/serial/io_ti.c::edge_shutdown() : ... 2797 for (i=0; i < serial->num_ports; ++i) { 2798 edge_port = usb_get_serial_port_data(serial->port[i]); 2799 edge_remove_sysfs_attrs(edge_port->port); 2800 if (edge_port) { 2801 edge_buf_free(edge_port->ep_out_buf); 2802 kfree(edge_port); 2803 } 2804 usb_set_serial_port_data(serial->port[i], NULL); 2805 } ... It's complaining that we dereference 'edge_port' in line 2799 which makes the test of that pointer against NULL in 2800 pointless, since if edge_port was actually NULL we'd have crashed already before reaching line 2800. Reading the edge_open() function it seems to me that the pointer returned by usb_get_serial_port_data(serial->port[i]) and stored in 'edge_port' can never actually be NULL here, so the test is entirely superfluous (even if it could be NULL it would be pointless here, ignoring the then possible crash in that case, since both edge_buf_free() and kfree() can handle being passed NULL pointers. This patch removes the pointless conditional (and also makes a few tiny style corrections now that I was in the area anyway). Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: mos7720, mos7840: remove redundant urb checkFlorin Malita
Coverity (1709, 1710, 1711, 1712, 1713) actually flagged these as REVERSE_INULLs (NULL check performed after dereference). But looking at the other drivers I can't see any similar tests and the USB core already makes sure urb is non-null - so might as well get rid of the checks. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: sierra: Add new devicesKevin Lloyd
This patch adds new devices to the Sierra Wireless driver. This is being resubmitted because the dependent patch (patch 01/02) needed to be resubmitted. Signed-off-by: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: sierra: Add TRU-Install (c) SupportKevin Lloyd
This patch adds compatibility with Sierra Wireless' new TRU-Install feature. Future devices that use this feature will not work unless this patch has been applied. Signed-off-by: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: io_*: remove bogus termios no change checksAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: mos7720: remove bogus no termios change checkAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: visor and whiteheat: remove bogus termios change checksAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: pl2303: remove bogus checks and fix speed support to use ↵Alan Cox
tty_get_baud_rate() Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: mos7840.c: turn this into a serial driverAlan Cox
The MOS driver is "interesting", in a bad kind of 'how the hell did this get merged' kind of way - Remove the bogus termios change check - Remove the duplicate code for half the ioctls - Remove the supporting code to duplicate the ioctl code Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: ftdi_sio: fix oops due to processing workarounds too earlyOliver Neukum
Fix an oops that happens in relation with applying work arounds for buggy ftdi_sio devices. The quirks were handled too early because due to changes in the initialisation of usb serial devices the device was not fully initialised when the old hook was called. Addresses bug 8564 Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 19:37:39 +0000