aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/storage
AgeCommit message (Collapse)Author
2009-03-24usb-storage: make freecom a separate moduleAlan Stern
This patch (as1212) converts usb-storage's freecom subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24usb-storage: make shuttle_usbat a separate moduleAlan Stern
This patch (as1211) converts usb-storage's shuttle_usbat subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24usb-storage: make cypress_atacb a separate moduleAlan Stern
This patch (as1210) converts usb-storage's cypress_atacb subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24usb-storage: make sddr55 a separate moduleAlan Stern
This patch (as1209) converts usb-storage's sddr55 subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24usb-storage: make isd200 a separate moduleAlan Stern
This patch (as1208) converts usb-storage's isd200 subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24usb-storage: make sddr09 a separate moduleAlan Stern
This patch (as1207) converts usb-storage's sddr09 subdriver into a separate module. An unexpected complication arises because of DPCM devices, in which one LUN uses the sddr09 transport and one uses the standard CB transport. Since these devices can be used even when USB_STORAGE_SDDR09 isn't configured, their entries in unusual_devs.h require special treatment. If SDDR09 isn't configured then the entries remain in unusual_devs.h; if it is then the entries are present in unusual_sddr09.h instead. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24usb-storage: prepare for subdriver separationAlan Stern
This patch (as1206) is the first step in converting usb-storage's subdrivers into separate modules. It makes the following large-scale changes: Remove a bunch of unnecessary #ifdef's from usb_usual.h. Not truly necessary, but it does clean things up. Move the USB device-ID table (which is duplicated between libusual and usb-storage) into its own source file, usual-tables.c, and arrange for this to be linked with either libusual or usb-storage according to whether USB_LIBUSUAL is configured. Add to usual-tables.c a new usb_usual_ignore_device() function to detect whether a particular device needs to be managed by a subdriver and not by the standard handlers in usb-storage. Export a whole bunch of functions in usb-storage, renaming some of them because their names don't already begin with "usb_stor_". These functions will be needed by the new subdriver modules. Split usb-storage's probe routine into two functions. The subdrivers will call the probe1 routine, then fill in their transport and protocol settings, and then call the probe2 routine. Take the default cases and error checking out of get_transport() and get_protocol(), which run during probe1, and instead put a check for invalid transport or protocol values into the probe2 function. Add a new probe routine to be used for standard devices, i.e., those that don't need a subdriver. This new routine checks whether the device should be ignored (because it should be handled by ub or by a subdriver), and if not, calls the probe1 and probe2 functions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: fix USB_STORAGE_CYPRESS_ATACBBoaz Harrosh
commit 64a87b24: [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer changed the scsi_eh_prep_cmnd logic by making it clear the ->cmnd buffer. But the sat to cypress atacb translation supposed the ->cmnd buffer wasn't modified. This patch makes it set the ->cmnd buffer after scsi_eh_prep_cmnd call. The problem and a fix was reported by Matthieu CASTET <castet.matthieu@free.fr> It also removes all the hackery fiddling of scsi_cmnd and scsi_eh_save by requesting from scsi_eh_prep_cmnd to prepare a read into ->sense_buffer, which is much more suitable a buffer for HW transfers, then after the command execution the regs read is copied into regs buffer before actual preparation of sense_buffer. Also fix an alien comment character to my utf-8 editor. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Cc: stable <stable@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Matthew Dharm <mdharm-kernel@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24usb_storage: make Kconfig note visible in the consoleBorislav Petkov
Make lines about usb_storage depending on SCSI visible when configuring the kernel in a 80x25 console Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: add missing KERN_* constants to printksFrank Seidel
According to kerneljanitors todo list all printk calls (beginning a new line) should have an according KERN_* constant. Those are the missing peaces here for the usb subsystem. Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: drivers: use USB API functions rather than constantsJulia Lawall
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: usb-storage: increase max_sectors for tape drivesAlan Stern
This patch (as1203) increases the max_sector limit for USB tape drives. By default usb-storage sets max_sectors to 240 (i.e., 120 KB) for all devices. But tape drives need a higher limit, since tapes can and do have very large block sizes. Without the ability to transfer an entire large block in a single command, such tapes can't be used. This fixes Bugzilla #12207. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Phil Mitchell <philipm@sybase.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: storage: Unusual USB device Prolific 2507 variation addedThomas Bartosik
The "c-enter" USB to Toshiba 1.8" IDE enclosure needs special treatment to work flawlessly. This patch is absolutely trivial, as the integrated USB-IDE bridge is already identified to be an "unusual" device, only the bcdDevice is different (lower) to the bcdDeviceMin already included in the kernel. It is a Prolific 2507 bridge. T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=067b ProdID=2507 Rev= 0.01 S: Manufacturer=Prolific Technology Inc. S: Product=ATAPI-6 Bridge Controller S: SerialNumber=00000272 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Thomas Bartosik <tbartdev@gmx-topmail.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: Updated unusual-devs entry for USB mass storage on Nokia 6233Moritz Muehlenhoff
Current firmware revision 5.60 still behaves the same, so update the quirk up a (non-existing) 99.99 revision. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493415 Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Tested-by: Jan Heitkoetter <devnull@heitkoetter.net> Cc: stable <stable@kernel.org> Signed-off-by: Phil Dibowitz <phil@ipom.com>
2009-03-17USB: unusual_devs: Add support for GI 0431 SD-Card interfaceJan Dumon
Enable the SD-Card interface on the GI 0431 HSUPA stick from Option. The unusual_devs.h entry is necessary because the device descriptor is vendor-specific. That prevents usb-storage from binding to it as an interface driver. T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0af0 ProdID=7501 Rev= 0.00 S: Manufacturer=Option N.V. S: Product=Globetrotter HSUPA Modem C:* #Ifs=11 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=10 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-12[SCSI] Remove SUGGEST flagsMartin K. Petersen
The SUGGEST_* flags in the SCSI command result have been out of fashion for a while and we don't actually use them in the error handling. Remove the remaining occurrences. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-02-27USB: usb-storage: add IGNORE_RESIDUE flag for Genesys Logic adaptersAlan Stern
This patch (as1219) adds the IGNORE_RESIDUE flag to the unusual_devs entries for Genesys Logic's USB-IDE adapter. Although this device usually gets the residue correct, there is one command crucial to the operation of CD and DVD drives which it messes up. Tested-by: Mike Lampard <mike@mtgambier.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: Storage: Update unusual_devs entry for Datafab KECF-USBNick Holloway
This device suffers from the off-by-one error when reporting the capacity, so add US_FL_FIX_CAPACITY to the existing entry. Signed-off-by: Nick Holloway <Nick.Holloway@pyrites.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: usb-storage: add Pentax to the bad-vendor listAlan Stern
This patch (as1202) adds Pentax to usb-storage's list of bad vendors whose devices always need the CAPACITY_HEURISTICS flag. This is in addition to the existing entries: Nokia, Nikon, and Motorola. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Virgo Pärna <virgo.parna@mail.ee> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: usb-storage: remove WARN from last-sector hacksAlan Stern
This patch (as1201) removes the WARN() from the last-sector hacks in usb-storage, thereby making the code match the version now in .27-stable and .28-stable. The WARN() isn't needed, since there is no longer any intention of assuming that all storage devices have an even number of sectors, and it annoys users for no good reason. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: storage: Add another unusual_dev for off-by-one bugPhil Dibowitz
Argosy has released another device with the off-by-one sector. This is a harddrive with an internal cardreader which is affected. Based on a patch written by Martijn Hijdra <martijn.hijdra@gmail.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: Martijn Hijdra <martijn.hijdra@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: unusual_dev: usb-storage needs to ignore a devicePhil Dibowitz
This patch adds an unusual_devs entry for a Sony Ericsson modem. Like many other modems, we have to ignore the storage device in order to access the modem. At this time usb_modeswitch does not work with this device. Reported-by: The Solutor <thesolutor@gmail.com>. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: Remove ZTE modem from unusual_devicesPhil Dibowitz
The ZTE modem entry causes usb-storage to ignore the device, but for some versions of the device, usb-storage mode is required to get to modem ode. For both kinds the tool: http://www.draisberghof.de/usb_modeswitch/ should work. Note that the various versions of the device have the same ProductId, VendorId, and bcdDevice number, so we cannot have the entry for some and not others. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: storage: support of Dane-Elec MediaTouch USB deviceJean-Baptiste Onofre
This adds another unusual_devs.h entry for a device that can't handle more than 64k reads/writes in a single command. Signed-off-by: Jean-Baptiste Onofre <jb@nanthrax.net> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: storage: add unusual devs entryOliver Neukum
This adds an unusual devs entry for 2116:0320 Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: storage: set CAPACITY_HEURISTICS flag for bad vendorsAlan Stern
This patch (as1194) makes usb-storage set the CAPACITY_HEURISTICS flag for all devices made by Nokia, Nikon, or Motorola. These companies seem to include the READ CAPACITY bug in all of their devices. Since cell phones and digital cameras rely on flash storage, which always has an even number of sectors, setting CAPACITY_HEURISTICS shouldn't cause any problems. Not even if the companies wise up and start making devices without the bug. A large number of unusual_devs entries are now unnecessary, so the patch removes them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: storage: make the "quirks=" module parameter writableAlan Stern
This patch (as1190) makes usb-storage's "quirks=" module parameter writable, so that users can add entries for their devices at runtime with no need to reboot or reload usb-storage. New codes are added for the SANE_SENSE, CAPACITY_HEURISTICS, and CAPACITY_OK flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: storage: add last-sector hacksAlan Stern
This patch (as1189b) adds some hacks to usb-storage for dealing with the growing problems involving bad capacity values and last-sector accesses: A new flag, US_FL_CAPACITY_OK, is created to indicate that the device is known to report its capacity correctly. An unusual_devs entry for Linux's own File-backed Storage Gadget is added with this flag set, since g_file_storage always reports the correct capacity and since the capacity need not be even (it is determined by the size of the backing file). An entry in unusual_devs.h which has only the CAPACITY_OK flag set shouldn't prejudice libusual, since the device will work perfectly well with either usb-storage or ub. So a new macro, COMPLIANT_DEV, is added to let libusual know about these entries. When a last-sector access succeeds and the total number of sectors is odd (the unexpected case, in which guessing that the number is even might cause trouble), a WARN is triggered. The kerneloops.org project will collect these warnings, allowing us to add CAPACITY_OK flags for the devices in question before implementing the default-to-even heuristic. If users want to prevent the stack dump produced by the WARN, they can disable the hack by adding an unusual_devs entry for their device with the CAPACITY_OK flag. When a last-sector access fails three times in a row and neither the FIX_CAPACITY nor the CAPACITY_OK flag is set, we assume the last-sector bug is present. We replace the existing status and sense data with values that will cause the SCSI core to fail the access immediately rather than retry indefinitely. This should fix the difficulties people have been having with Nokia phones. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: unusual dev for Option N.V. ZeroCD modemsDan Williams
Many newer Option mobile broadband devices initially provide a usb-storage "driver CD" device that's pretty useless on Linux since any software on it most likely wouldn't be compatible with your kernel or distro anyway. Thus, by default just kill the driver CD device by sending the SCSI 'rezero' command, but allow override of the default behavior via usb-storage module parameter so users can keep the ZeroCD device if they really want to. Inspired by the Sierra TruInstall patch. Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: Peter Henn <p.henn@option.com Cc: Denis Joseph Barrow <D.Barow@option.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: usb-storage: merge DPCM support into SDDR09Alan Stern
The DPCM subdriver is a little peculiar, in that it's meant to support devices where LUN 0 is Compact Flash and uses the CB transport whereas LUN 1 is SmartMedia and uses the SDDR09 transport. Thus DPCM isn't really a transport in itself; it's more like a demultiplexer. Much of the DPCM code is part of the SDDR09 subdriver already, and the remaining part is fairly small. This patch (as1182) moves that extra piece into sddr09.c, thereby eliminating dpcm.c. Also eliminated is the Kconfig entry for DPCM support; it is now listed as part of the SDDR09 entry. In order to make sure that the semantics are the same as before, each unusual_devs entry for DPCM is now present twice: once with DPCM support if SDDR09 is configured (as before), and once with the SINGLE_LUN flag and CB support otherwise. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: storage: set bounce limit for non-DMA-capable host controllersAlan Stern
This patch (as1175) makes usb-storage set a SCSI device's request-queue bounce limit such that all buffers will be located in addressable memory (i.e., not in high memory) if the host controller's dma_mask is NULL. This is necessary when the host controller doesn't support DMA: If a buffer is in high memory then the both the virtual and DMA addresses produced by the scatter-gather library will be NULL, preventing the HCD from accessing the buffer's data. In particular, the isp1760 driver needs this when used on a system with more than 1 GB of memory. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Acked-by: Jens Axboe <jens.axboe@oracle.com> Tested-by: Thomas Hommel <Thomas.Hommel@gefanuc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: usb-storage: merge ATAPI and QIC-157 protocol routinesAlan Stern
This patch (as1174) merges usb-storage's QIC-157 and ATAPI protocol routines. Since the two functions are identical, there's no reason to keep them separate. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: usb-storage: merge CB and CBI transport routinesAlan Stern
This patch (as1173) merges usb-storage's CB and CBI transports into a single routine. So much of their code is common, it's silly to keep them separate. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: storage: Flag devices known to support SANE_SENSEBen Efros
Add a few devices known to have support for larger sense buffers. Supporting SANE_SENSE does not necessarily mean SAT-1 or SAT-2 is fully supported. Depends on SANE_SENSE patch [1]. Incorporates the Maxtor and Western Digital devices originally submitted by Matthieu CASTET [2]. [1] https://lists.one-eyed-alien.net/pipermail/usb-storage/2008-November/004181.html [2] http://marc.info/?l=linux-usb&m=121762869915609&w=2 Signed-off-by: Ben Efros <ben@pc-doctor.com> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: storage devices and SATBen Efros
Add the SANE SENSE flag to indicate that a device is capable of handling more than 18-bytes of sense data. This functionality is required for USB-ATA bridges implementing SAT. A future patch will actually enable this function for several devices. The logic behind this is that we can detect support for SANE_SENSE in a few ways: 1) ATA PASS THROUGH (12) or (16) execute successfully 2) SPC-3 or higher is in use 3) A previous CHECK CONDITION occurred with sense format 70-73 and had a length greater than 18-bytes total Signed-off-by: Ben Efros <ben@pc-doctor.com> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: usb-storage: remove us->sensebufAlan Stern
This patch (as1171) removes us->sensebuf, since it isn't used anywhere. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07usb-storage: clean up unusual_devs.hAlan Stern
This patch (as1170) removes some duplicate entries in unusual_devs.h and rearranges a few others to put the list in proper numerical order. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: usb-storage: add "quirks=" module parameterAlan Stern
This patch (as1163b) adds a "quirks=" module parameter to usb-storage. This will allow people to make short-term changes to their unusual_devs list without rebuilding the entire driver. Testing will become much easier, and less-sophisticated users will be able to access their buggy devices after a simple config-file change instead of having to wait for a new kernel release. The patch also adds a documentation entry for usb-storage's "delay_use" parameter, which has been around for years but but was never listed among the kernel parameters. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: change interface to usb_lock_device_for_reset()Alan Stern
This patch (as1161) changes the interface to usb_lock_device_for_reset(). The existing interface is apparently not very clear, judging from the fact that several of its callers don't use it correctly. The new interface always returns 0 for success and it always requires the caller to unlock the device afterward. The new routine will not return immediately if it is called while the driver's probe method is running. Instead it will wait until the probe is over and the device has been unlocked. This shouldn't cause any problems; I don't know of any cases where drivers call usb_lock_device_for_reset() during probe. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: storage: unusual_devs.h additions for Macpower MasterBoxSergey Ovcharenko
Jason Johnston reported these problems with his external USB hard drive: http://bugs.gentoo.org/show_bug.cgi?id=250789 The number of reported sectors is off-by-one. /proc/bus/usb/devices: T: Bus=01 Lev=02 Prnt=08 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0dc4 ProdID=0073 Rev= 0.00 S: Manufacturer=Macpower Technology Co.LTD. S: Product=USB 2.0 3.5" DEVICE S: SerialNumber=03006C C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sergey Ovcharenko <velegrin@mail.mipt.ru> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: storage: recognizing and enabling Nokia 5200 cell phoesPaulo Afonso Graner Fessel
This patch corrects the issue when one connects a Nokia 5200 cell phone in data storage mode. If one uses an unpatched unusual_devs.h, the following messages appear on /var/log/messages: Dec 12 01:03:24 alberich kernel: usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 12 01:03:25 alberich kernel: usb 4-2: configuration #1 chosen from 1 choice Dec 12 01:03:25 alberich kernel: scsi10 : SCSI emulation for USB Mass Storage devices Dec 12 01:03:25 alberich kernel: usb 4-2: New USB device found, idVendor=0421, idProduct=04bd Dec 12 01:03:25 alberich kernel: usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Dec 12 01:03:25 alberich kernel: usb 4-2: Product: Nokia 5200 Dec 12 01:03:25 alberich kernel: usb 4-2: Manufacturer: Nokia Dec 12 01:03:25 alberich kernel: usb 4-2: SerialNumber: 353930018354523 Dec 12 01:03:25 alberich kernel: usbcore: registered new interface driver ub Dec 12 01:03:30 alberich kernel: scsi 10:0:0:0: Direct-Access Nokia Nokia 5200 0000 PQ: 0 AN SI: 4 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] 3985409 512-byte hardware sectors (2041 MB) Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Write Protect is off Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Assuming drive cache: write through Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] 3985409 512-byte hardware sectors (2041 MB) Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Write Protect is off Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Assuming drive cache: write through Dec 12 01:03:30 alberich kernel: sdg: sdg1 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Attached SCSI removable disk Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: Attached scsi generic sg9 type 0 Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Add. Sense: No additional sense information Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Add. Sense: No additional sense information Dec 12 01:03:30 alberich kernel: sd 10:0:0:0: [sdg] Sense Key : No Sense [current] (...) The MicroSD card in the phone remains inaccessible and finally the cell phone turns itself off. The patch solves this problem and makes the cell phone fully accessible: [root@alberich kernel-linus-2.6.27.5-1mdv]# df -h Sist. Arq. Tam Usad Disp Uso% Montado em /dev/sda6 31G 5,2G 26G 17% / /dev/sda1 92M 27M 61M 31% /boot /dev/mapper/homevg-homelv 240G 237G 3,5G 99% /home /dev/sda3 21G 7,9G 13G 40% /mnt/windows /dev/sdg1 2,0G 287M 1,7G 15% /media/disk <-------- I've found necessary to use the FL_US_CAPACITY_FIX switch, as without it the cell phone is recognized but it went berserk when performing low-level functions on it (a fdisk -l /dev/uba for example). lsusb -v output follows: Bus 004 Device 004: ID 0421:04bd Nokia Mobile Phones Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0421 Nokia Mobile Phones idProduct 0x04bd bcdDevice 6.03 iManufacturer 1 Nokia iProduct 2 Nokia 5200 iSerial 3 353930018354523 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0001 Self Powered Signed-off-by: Paulo Afonso Graner Fessel <pfessel@gmail.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: storage: extend unusual range for 067b:3507Oliver Neukum
This device has been released in a new revision which is still buggy. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: another unusual_devs entry for another bad Argosy storage deviceNguyen Anh Quynh
I have another Argosy USB storage device, which has the same problem with the Argosy USB storage device already fixed in 2.6.27.7. But this device has another product ID (840:84), so this patch adds a new entry into unusual_devs to fix the mount problem. I enclose here two patches: one against 2.6.27.8, and another against the latest linus-git tree. The information about the Argosy device is like below: #lsusb -v -d 840:84 Bus 005 Device 005: ID 0840:0084 Argosy Research, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0840 Argosy Research, Inc. idProduct 0x0084 bcdDevice 0.01 iManufacturer 1 Generic iProduct 2 USB 2.0 Storage Device iSerial 3 8400000000002549 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Before the patch, dmesg returns a lot of information like below (my dmesg is overflown): .... [ 138.833390] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information [ 138.877631] sd 7:0:0:0: [sdb] Sense Key : No Sense [current] [ 138.877643] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information [ 138.921906] sd 7:0:0:0: [sdb] Sense Key : No Sense [current] [ 138.921923] sd 7:0:0:0: [sdb] Add. Sense: No additional sense information .... After the fix, dmesg returns below information: .... usb 5-1: new high speed USB device using ehci_hcd and address 5 usb 5-1: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 7:0:0:0: Direct-Access HTS54808 0M9AT00 MG4O PQ: 0 ANSI: 0 sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 7:0:0:0: [sdb] Assuming drive cache: write through sd 7:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 7:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 7:0:0:0: [sdb] Attached SCSI disk sd 7:0:0:0: Attached scsi generic sg1 type 0 kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Cc: Kuniyasu Suzaki <k.suzaki@aist.go.jp> Signed-off-by: Nguyen Anh Quynh <aquynh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: unusual_devs.h additions for Pentax K10DDaniel Drake
Jaak Ristioja reported problems with his Pentax K10D camera: https://bugs.gentoo.org/show_bug.cgi?id=250406 /proc/bus/usb/devices: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0a17 ProdID=006e Rev= 1.00 S: Manufacturer=PENTAX Corporation S: Product=K10D C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=100ms The number of reported sectors is off-by-one. Signed-off-by: Daniel Drake <dsd@gentoo.org> Cc: Kadianakis George <desnacked@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Phil Dibowitz <phil@ipom.com>
2008-12-17usb-storage: update unusual_devs entry for Nokia 5310Alan Stern
This patch (as1179) updates the unusual_devs entry for Nokia's 5310 phone to include a more recent firmware revision. This fixes Bugzilla #12099. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Robson Roberto Souza Peixoto <robsonpeixoto@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: Unusual devs patch for Nokia 3500cOzan Sener
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0060 Rev= 5.51 S: Manufacturer=Nokia S: Product=Nokia 3500c S: SerialNumber=357687010280751 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Ozan Sener <themgzzy@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: storage: unusual_devs.h: Nokia 3109c additionCSÉCSY László
2.6.26(.x, cannot remember) could handle the microSD card in my Nokia 3109c attached via USB as mass storage, 2.6.27(.x, up to and included 2.6.27.8) cannot. Please find the attached patch which fixes this regression, and a copy of /proc/bus/usb/devices with my phone plugged in running with this patch on Frugalware. T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0063 Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 3109c S: SerialNumber=359561013742570 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: CSÉCSY László <boobaa@frugalware.org> Cc: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-30USB: usb-storage: unusual_devs entry for Nikon D2HTobias Kunze Briseño
This patch adds an unusual_devs entry for the Nikon D2H camera. From: Tobias Kunze Briseño <t@fictive.com>, Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-30USB: storage: unusual_devs entry for Mio C520-GPSAlan Stern
This patch (as1176) adds an unusual_devs entry for the Mio C520 GPS unit. Other devices also based on the Mitac hardware use the same USB interface firmware, so the Vendor and Product names are generalized. This fixes Bugzilla #11583. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Tamas Kerecsen <kerecsen@bigfoot.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-19USB: storage: update unusual_devs entries for Nokia 5300 and 5310Alan Stern
This patch (as1168) updates the unusual_devs entry for the Nokia 5300. According to Jorge Lucangeli Obes <t4m5yn@gmail.com>, some existing models have a revision number lower than the lower limit of the current entry. The patch also moves the entry for the Nokia 5310 to its correct place in the file. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-01 20:48:03 +0000