aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Use helpers to obtain task pid in printksPavel Emelyanov
The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18freezer: introduce freezer-friendly waiting macrosRafael J. Wysocki
Introduce freezer-friendly wrappers around wait_event_interruptible() and wait_event_interruptible_timeout(), originally defined in <linux/wait.h>, to be used in freezable kernel threads. Make some of the freezable kernel threads use them. This is necessary for the freezer to stop sending signals to kernel threads, which is implemented in the next patch. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17security/ cleanupsAdrian Bunk
This patch contains the following cleanups that are now possible: - remove the unused security_operations->inode_xattr_getsuffix - remove the no longer used security_operations->unregister_security - remove some no longer required exit code - remove a bunch of no longer used exports Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17kill DECLARE_MUTEX_LOCKEDChristoph Hellwig
DECLARE_MUTEX_LOCKED was used for semaphores used as completions and we've got rid of them. Well, except for one in libusual that the maintainer explicitly wants to keep as semaphore. So convert that useage to an explicit sema_init and kill of DECLARE_MUTEX_LOCKED so that new code is reminded to use a completion. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: "Satyam Sharma" <satyam.sharma@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Slab API: remove useless ctor parameter and reorder parametersChristoph Lameter
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits) Fix memory leak in dm-crypt SPARC64: sg chaining support SPARC: sg chaining support PPC: sg chaining support PS3: sg chaining support IA64: sg chaining support x86-64: enable sg chaining x86-64: update pci-gart iommu to sg helpers x86-64: update nommu to sg helpers x86-64: update calgary iommu to sg helpers swiotlb: sg chaining support i386: enable sg chaining i386 dma_map_sg: convert to using sg helpers mmc: need to zero sglist on init Panic in blk_rq_map_sg() from CCISS driver remove sglist_len remove blk_queue_max_phys_segments in libata revert sg segment size ifdefs Fixup u14-34f ENABLE_SG_CHAINING qla1280: enable use_sg_chaining option ...
2007-10-16vt/vgacon: Check if screen resize request comes from userspaceAntonino A. Daplas
Various console drivers are able to resize the screen via the con_resize() hook. This hook is also visible in userspace via the TIOCWINSZ, VT_RESIZE and VT_RESIZEX ioctl's. One particular utility, SVGATextMode, expects that con_resize() of the VGA console will always return success even if the resulting screen is not compatible with the hardware. However, this particular behavior of the VGA console, as reported in Kernel Bugzilla Bug 7513, can cause undefined behavior if the user starts with a console size larger than 80x25. To work around this problem, add an extra parameter to con_resize(). This parameter is ignored by drivers except for vgacon. If this parameter is non-zero, then the resize request came from a VT_RESIZE or VT_RESIZEX ioctl and vgacon will always return success. If this parameter is zero, vgacon will return -EINVAL if the requested size is not compatible with the hardware. The latter is the more correct behavior. With this change, SVGATextMode should still work correctly while in-kernel and stty resize calls can expect correct behavior from vgacon. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16USB storage: sg chaining supportJens Axboe
[PATCH] USB storage: sg chaining support Modify usb_stor_access_xfer_buf() to take a pointer to an sg entry pointer, so we can keep track of that instead of passing around an integer index (which we can't use when dealing with multiple scatterlist arrays). Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-15docbook: fix usb contentRandy Dunlap
Fix USB docbook warnings. Warning(linux-2.6.23-git8//include/linux/usb/gadget.h:487): No description found for parameter 'g' Warning(linux-2.6.23-git8//include/linux/usb/gadget.h:506): No description found for parameter 'g' Warning(linux-2.6.23-git8//drivers/usb/core/hub.c:1416): No description found for parameter 'usb_dev' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits) [ARM] 4578/1: CM-x270: PCMCIA support [ARM] 4577/1: ITE 8152 PCI bridge support [ARM] 4576/1: CM-X270 machine support [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put() [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols [ARM] pxa: PXA3xx base support [NET] smc91x: fix PXA DMA support code [SERIAL] Fix console initialisation ordering [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23) [ARM] Rename consistent_sync() as dma_cache_maint() [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32 [ARM] 4594/1: ns9xxx: use the new gpio functions [ARM] 4593/1: ns9xxx: implement generic clockevents ...
2007-10-15Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits) [SCSI] gdth: fix CONFIG_ISA build failure [SCSI] esp_scsi: remove __dev{init,exit} [SCSI] gdth: !use_sg cleanup and use of scsi accessors [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2 [SCSI] gdth: Setup proper per-command private data [SCSI] gdth: Remove gdth_ctr_tab[] [SCSI] gdth: switch to modern scsi host registration [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes [SCSI] gdth: clean up host private data [SCSI] gdth: Remove virt hosts [SCSI] gdth: Reorder scsi_host_template intitializers [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers [SCSI] gdth: Remove 2.4.x support, in-kernel changelog [SCSI] gdth: split out pci probing [SCSI] gdth: split out eisa probing [SCSI] gdth: split out isa probing gdth: Make one abuse of scsi_cmnd less obvious [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE ...
2007-10-14signedness: module_param_array nump argumentAl Viro
... should be unsigned int Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13Fix ohci-ssb with !CONFIG_PMAl Viro
ohci_bus_{suspend,resume} exists only if we have CONFIG_PM; do the same thing as other subdrivers... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits) PM: merge device power-management source files sysfs: add copyrights kobject: update the copyrights kset: add some kerneldoc to help describe what these strange things are Driver core: rename ktype_edd and ktype_efivar Driver core: rename ktype_driver Driver core: rename ktype_device Driver core: rename ktype_class driver core: remove subsystem_init() sysfs: move sysfs file poll implementation to sysfs_open_dirent sysfs: implement sysfs_open_dirent sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir sysfs: make sysfs_root a regular directory dirent sysfs: open code sysfs_attach_dentry() sysfs: make s_elem an anonymous union sysfs: make bin attr open get active reference of parent too sysfs: kill unnecessary NULL pointer check in sysfs_release() sysfs: kill unnecessary sysfs_get() in open paths sysfs: reposition sysfs_dirent->s_mode. sysfs: kill sysfs_update_file() ...
2007-10-12USB: fix race in autosuspend rescheduleAlan Stern
This patch (as1002) fixes a small race which can occur when a driver expects usbcore to reschedule an autosuspend request. If the request arrives too late, it won't be rescheduled. The patch adds an extra argument to autosuspend_check(), indicating that a reschedule is needed no matter how much time has elapsed. It also tries to avoid letting asynchronous changes to the value of jiffies cause a delay to become negative, by caching a local copy of the current time. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12atmel_usba_udc: Keep track of the device statusHaavard Skinnemoen
Keep track of the device status (as returned by the GET_STATUS request) and allow it to be manipulated by set_selfpowered() as well as SET_FEATURE/CLEAR_FEATURE (for remote wakeup) Implement the wakeup() op, which refuses to do anything if the DEVICE_REMOTE_WAKEUP feature wasn't set by the host. Now this driver passes USBCV (at least, with gadget zero). Fix one more locking bug; lockdep is every developer's friend. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: Nikon D40X unusual_devs entryOrtwin Glück
Not surprisingly the Nikon D40X DSC needs the same quirks as the D40, but it has a separate ID. See http://bugs.gentoo.org/show_bug.cgi?id=191431 From: Ortwin Glück <odi@odi.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: serial core should respect driver requirementsAlan Stern
This patch (as997) fixes a bug in the USB serial core. The core needs to pay attention to drivers' requirements regarding the number and type of endpoints a device has. At the same time, the patch changes the NUM_DONT_CARE constant (which is stored in a single-byte field) from -1 to a safer, unsigned value. It also improves the kerneldoc for several fields in the usb_serial_driver structure. Finally, the patch replaces a list_for_each() with list_for_each_entry(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: skip autosuspended devices during system resumeAlan Stern
System suspends and hibernation are supposed to be as transparent as possible. By this reasoning, if a USB device is already autosuspended before the system sleep begins then it should remain autosuspended after the system wakes up. This patch (as1001) adds a skip_sys_resume flag to the usb_device structure and uses it to avoid waking up devices which were suspended when a system sleep began. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: mutual exclusion for EHCI init and port resetsAlan Stern
This patch (as999) fixes a problem that sometimes shows up when host controller driver modules are loaded in the wrong order. If ehci-hcd happens to initialize an EHCI controller while the companion OHCI or UHCI controller is in the middle of a port reset, the reset can fail and the companion may get very confused. The patch adds an rw-semaphore and uses it to keep EHCI initialization and port resets mutually exclusive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: David Miller <davem@davemloft.net> Cc: Dely L Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: allow usbstorage to have LUNS greater than 2TbRichard Sharpe
Attached is a very small patch (several comment lines) and a one-line coded change) that allows for USB storage devices that are larger than 2TB. At the company where I work we need such support, and one of my co-workers, Jane Liu, pointed out that SCSI low-layer drivers need to specify what size CDBs they accept. After looking through the code it became obvious that the current USB Storage code accepted the default of 12-byte CDBs, so I changed it to accept 16-byte CDBs. This allows our device to work. Signed-off-by: Richard Sharpe <rsharpe@richardsharpe.com> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: Adding support for SHARP WS011SH to ipaq.cNobuhiro Iwamatsu
This patch supports for SHARP WS011SH[0] to ipaq.c [0]: http://www.willcom-inc.com/ja/lineup/ws/011sh/index.html (Sorry , Japanese only.) Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: add atmel_usba_udc driverHaavard Skinnemoen
This is a driver for the Atmel USBA UDC which can be found integrated on AT32AP700x AVR32 processors. For hardware documentation, please see the AT32AP7000 data sheet: http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf This is a dual speed controller (connects at high or full speed). The driver supports up to 7 control, bulk, interrupt and isochronous endpoints with some constraints. Bulk, interrupt and isochronous transfers are driven by DMA. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: ohci SSB bus glueMichael Buesch
This adds SSB bus glue for the USB OHCI HCD. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: ehci build fixes on au1xxx, ppc-socDavid Brownell
Cleanup: references to two PM routines (and HCD entry points) that no longer exist are swapped with their replacements. Evidently au1xxx and ppc-soc EHCI support doesn't get compiled with power management very much, or these build bugs would have been patched long ago. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: add runtime frame_no quirk for big-endian OHCIValentine Barshak
Add OHCI big endian frame_no quirk. The frame_no value stored in the HCCA is a 16 bit field at a specific offset, but since not all CPUs can do 16-bit memory accesses it's used as a 32 bit field. And that's why big-endian OHCI must shift 16 bits ... unless the spec is not followed. Currently there's one MPC52xx platform that doesn't need the shift. This patch adds a new "big endian frame_no" quirk to control that at runtime. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: funsoft: Fix termiosAlan Cox
Funsoft has a bogus ioctl handler doing bogus termios handling in a bogus manner. Fortunately we can simply delete all the bogus bits and get the right default behaviour ! Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: visor: termios bitsAlan Cox
Visor has a huge complex routine which displays termios bits for debug but doesn't do anything. Get the correct behaviour by removing it all Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: unusual_devs entry for Nikon DSC D2XsAlan Stern
This patch (as996) adds an unusual_devs entry for the Nikon DSC D2Xs camera. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: move <linux/usb_gadget.h> to <linux/usb/gadget.h>David Brownell
Move <linux/usb_gadget.h> to <linux/usb/gadget.h>, reducing some of the clutter in the main include directory. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: Export URB statistics for powertopSarah Sharp
powertop currently tracks interrupts generated by uhci, ehci, and ohci, but it has no way of telling which USB device to blame USB bus activity on. This patch exports the number of URBs that are submitted for a given device. Cat the file 'urbnum' in /sys/bus/usb/devices/.../ Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: serial gadget: Disable endpoints on unloadVitaly Bordug
After Serial gadget is being unloaded, neither serial itself, nor other gadget stuff can be loaded subsequently. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: drivers/usb/misc/sisusbvga/sisusb.c: kill two unused variablesWANG Cong
Kill two unused variables in drivers/usb/misc/sisusbvga/sisusb.c. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12usb-gadget-ether: prevent oops caused by error interrupt raceBenedikt Spranger
Fix a longstanding race in the Ethernet gadget driver, which can cause an oops on device disconnect. The fix is just to make the TX path check whether its freelist is empty. That check is otherwise not necessary, since the queue is always stopped when that list empties (and restarted when request completion puts an entry back on that freelist). The race window starts when the network code decides to transmit a packet, and ends when hard_start_xmit() grabs the freelist lock. When disconnect() is called inside that window, it shuts down the TX queue and breaks the otherwise-solid assumption that packets are never sent through a TX queue that's stopped. Signed-off-by: Benedikt Spranger <bene@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: fix gregkh-usb-usb-sisusb2vga-convert-printk-to-dev_-macrosAndrew Morton
drivers/usb/misc/sisusbvga/sisusb.c: In function 'sisusb_open': drivers/usb/misc/sisusbvga/sisusb.c:2444: warning: 'sisusb' is used uninitialized in this function I can tell that'll oops just by looking at it. How come this code assume a 7,000 column xterm? :( Cc: Felipe Balbi <felipe.lima@indt.org.br> Cc: Thomas <thomas@winischhofer.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: r8a66597-hcd: fix driver removingYoshihiro Shimoda
Fixed the problem that accessed register of this controller after having called iounmap(). Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: r8a66597-hcd: fix endian problemYoshihiro Shimoda
Fixed the problem that does not work in the big endian machine. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: r8a66597-hcd: fix Class or Vendor RequestYoshihiro Shimoda
Fixed the problem that does not work in the case of bRequest = 0x05 in Class or Vendor Request. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: usb/serial/ch341.c: make 4 functions staticAdrian Bunk
This patch makes four needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: Driver for CH341 USB-serial adaptorFrank A Kingswood
This patch implements a USB serial port driver for the Winchiphead CH341 USB-RS232 Converter. This chip also implements an IEEE 1284 parallel port, I2C and SPI, but that is not supported by the driver. Signed-off-by: Frank A Kingswood <frank@kingswood-consulting.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: cxacru: Use appropriate logging for errorsSimon Arlott
When an error occurs, existing logging uses dbg() so the cause of a problem is hard to determine. Error conditions shouldn't only be properly reported with debugging enabled. A side effect of this change is that when an uninitialised device is started, a log message similar to the following is sent: cxacru 5-2:1.0: receive of cm 0x90 failed (-104) This is normal - the device did not respond so firmware will be loaded. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: cp2101.c: add additional device IDEdouard Lafargue
This patch adds an additional device ID to the cp2101 USB serial driver. This device is a Gemalto Prox-PU or CU contactless card reader (ISO14443-A/B and Mifare). The reader is a standard Gemalto serial proximity reader using the Gemalto Block Protocol (see reader's documentation) bundled with a built-in CP2102 for serial/USB conversion. Signed-off-by: Edouard Lafargue (edouard@lafargue.name) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: unusual_devs modification for Nikon D200Phil Dibowitz
Upgrade the unusual_devs.h file to support the Nikon D200 Signed-off-by: Mike Pagano <mpagano-kernel@mpagano.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: remove USB_QUIRK_NO_AUTOSUSPENDAlan Stern
This patch (as995) cleans up the remains of the former NO_AUTOSUSPEND quirk. Since autosuspend is disabled by default, we will let userspace worry about which devices can safely be suspended. Thus the lengthy series of quirk entries is no longer needed, and neither is the quirk ID. I suppose someone might eventually run across a hub that can't be suspended; let's ignore the possibility for now. The patch also cleans up the hasty way in which autosuspend gets disabled. Setting udev->autosuspend_delay to -1 wasn't quite right, because the value is always supposed to be a multiple of HZ. It's better to leave the delay value alone and set autosuspend_disabled, which is what the quirk routine used to do. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: don't propagate FREEZE or PRETHAW suspendsAlan Stern
This patch (as992) fixes a recently-added bug. During a FREEZE or PRETHAW suspend notification, non-root devices don't actually get suspended. So we shouldn't tell their parent hubs that they did. (This code path used to be skipped over, until the FREEZE/PRETHAW test got moved out of usb_suspend_both() into generic_suspend().) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: unusual_devs update for Nokia 6131Alan Stern
This patch (as991) updates the unusual_devs entry for the Nokia 6131 phone. As reported by Juan Ignacio Cherrutti, there's new firmware available but it still has the same old transfer-size limit. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: fix limited_power setting mistake in hub.cjidong xiao
This patch (jx001) fixes a variable assignment mistake in hub driver. limited_power should be set to 0 if the hub is self-powered,and 1 if the hub is bus-powered. However, the effect of the code was exactly opposite to the spec's statement for the Local Power Source field. The spec says, this field is 1 meaning Local power supply lost while this field is 0 indicating Local power supply good.(This statement is very confusing.) So this patch switchs the 0 and 1. Signed-off-by: Jason Xiao <jidong.xiao@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 14:48:20 +0000