aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2006-06-25Merge branch 'master' of /home/trondmy/kernel/linux-2.6/Trond Myklebust
2006-06-24Revert "[PATCH] usb: drivers/usb/core/devio.c dereferences a userspace pointer"Linus Torvalds
This reverts commit 786dc1d3d7333f269e17d742886eac2188a2d9cc. As Al so eloquently points out, the patch is crap. The old code was fine, the new code was bogus. It never dereferenced a user pointer, the "->" operator was to an array member, which gives the _address_ of the member (in user space), not an actual dereference at all. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-24Merge branch 'master' of /home/trondmy/kernel/linux-2.6/Trond Myklebust
Conflicts: fs/nfs/inode.c fs/super.c Fix conflicts between patch 'NFS: Split fs/nfs/inode.c' and patch 'VFS: Permit filesystem to override root dentry on mount'
2006-06-23[PATCH] Kill PF_SYNCWRITE flagJens Axboe
A process flag to indicate whether we are doing sync io is incredibly ugly. It also causes performance problems when one does a lot of async io and then proceeds to sync it. Part of the io will go out as async, and the other part as sync. This causes a disconnect between the previously submitted io and the synced io. For io schedulers such as CFQ, this will cause us lost merges and suboptimal behaviour in scheduling. Remove PF_SYNCWRITE completely from the fsync/msync paths, and let the O_DIRECT path just directly indicate that the writes are sync by using WRITE_SYNC instead. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23[PATCH] clean up default value of USB_ISP116X_HCD, USB_SL811_HCD and ↵Jean-Luc Leger
USB_SL811_CS Default values for boolean and tristate options can only be 'y', 'm' or 'n'. This patch removes wrong default for USB_ISP116X_HCD, USB_SL811_HCD and USB_SL811_CS. Signed-off-by: Jean-Luc Leger <jean-luc.leger@dspnet.fr.eu.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] VFS: Permit filesystem to override root dentry on mountDavid Howells
Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22[PATCH] USB: get USB suspend to work againGreg Kroah-Hartman
Yeah, it's a hack, but it is only temporary until Alan's patches reworking this area make it in. We really should not care what devices below us are doing, especially when we do not really know what type of devices they are. This patch relies on the fact that the endpoint devices do not have a driver assigned to us. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: only make /sys/class/usb show up when there is something in itGreg Kroah-Hartman
Now /sys/class/usb is dynamically created when we have something to put in it, and removed when all devices go away. Just trying to cut down on the clutter in sysfs... Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: convert usb class devices to real devicesGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: move usb_device_class class devices to be real devicesGreg Kroah-Hartman
This moves the usb class devices that control the usbfs nodes to show up in the proper place in the larger device tree. No userspace changes is needed, this is compatible due to the symlinks generated by the driver core. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: make endpoints real struct devicesGreg Kroah-Hartman
This will allow for us to give endpoints a major/minor to create a "usbfs2-like" way to access endpoints directly from userspace in an easier manner than the current usbfs provides us. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: make usb_create_ep_files take a struct deviceGreg Kroah-Hartman
Instead of a kobject, will make things easier in the future (don't know what I was thinking when I did this originally...) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: move the endpoint specific sysfs code to it's own fileGreg Kroah-Hartman
This makes it easier to modify in the future without touching anything else. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: move <linux/usb_input.h> to <linux/usb/input.h>David Brownell
Move <linux/usb_input.h> to <linux/usb/input.h> and remove some redundant includes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: move hardware-specific <linux/usb_*.h> to <linux/usb/*.h>David Brownell
This moves header files for controller-specific platform data from <linux/usb_XXX.h> to <linux/usb/XXX.h> to start reducing some clutter. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: move <linux/usb_cdc.h> to <linux/usb/cdc.h>David Brownell
This moves <linux/usb_cdc.h> to <linux/usb/cdc.h> to reduce some of the clutter of usb header files. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: whitespace removal from usb/gadget/etherDavid Brownell
This removes extraneous whitespace from the Ethernet/RNDIS gadget driver. It's all space-at-EOL, spaces-before-tabs, or tabs-then-spaces. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: unusual_devs entry for Nokia N80Alan Stern
Here is a patch (as720) adding an unusual_devs entry for the Nokia N80 mobile phone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] usbserial: Fixes wrong return values.Luiz Fernando N. Capitulino
Some usbserial functions returns -EINVAL if the port doesn't exist or if it's not opened. However, the right error code for such situations is -ENODEV. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] usb gadget: update pxa2xx_udc.c driver to fully support IXP4xx platformMilan Svoboda
This patch adds IXP465 into the list of known devices and adds IXP425 and IXP465 to the list of devices that have cfr. This is not described in the hardware documentation, but without it driver won't work. Workaround (#if 1) that seemed to get rid of lost status irqs is disabled for IXP4XX as it caused freezes during testing of control messages. No lost irqs are visible on IXP4XX. Driver survived tests running over night without any visible problems. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] usb gadget: fix compile errorsMilan Svoboda
This patch fixes compile errors when pxa2xx_udc is to be compiled for ixp4xx platform. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] usb gadget: allow drivers support speeds higher than full speedMilan Svoboda
This patch removes limitation which prevents use of drivers that support speeds different that full speed. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: gadget-serial: do not save/restore IRQ flags in gs_close()Franck Bui-Huu
As pointed out by David Brownell, we know that IRQs are never blocked when calling gs_close function. So the save/restore IRQ flags are pointless. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: gadget-serial: fix a deadlock when closing the serial deviceFranck Bui-Huu
When closing the device, the driver acquires/release twice the port lock before/after waiting for the data to be completely sent. Therefore it will dead lock. This patch fixes it and also uses the generic scheduler services for waiting for an event. Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB Serial: clean tty fields on failed device openFrank Gevaerts
If either the driver's open() method or try_module_get() fails, we need to set 'tty->driver_data' and 'port->tty' to NULL in serial_open(), otherwise we'll get an OOPS in usb_device_disconnect() when the device is disconnected. Signed-off-by: Frank Gevaerts <frank.gevaerts@fks.be> Acked-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: trivial DEBUG message correction in gadget ether driverMatt Reimer
Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: new driver for Cypress CY7C63xxx mirco controllersOliver Bock
This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information. Signed-off-by: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: implement error event in usbmonPete Zaitcev
Implement the "error" event in usbmon. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: update usbmon, fix glued linesPete Zaitcev
This update contains one bug fix: some lines can come out truncated, because of the safety cutoff. This happened because I forgot to update the size when status packets began to be printed. The rest is: - Comments updates - Allow snooping with pkmap on x86_64, which is cache-coherent - Enlarge event buffers (certainly we can have a couple of pages) - Add event counter First touch upon usbmon for 2.6.18. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: io_edgeport touch-upPete Zaitcev
Al Borchers suggested to do this in his review of my previous patch. I guess that I skipped this initially because of my visceral dislike of sizeof(data). But in this case it seems well localized. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] airprime.c: add Kyocera Wireless KPC650/Passport supportTimothy Sipples
Adds vendor & product IDs to drivers/usb/serial/airprime.c for Kyocera Wireless KPC650/Passport EV-DO/1xRTT PC Cards. Signed-off-by: Timothy Sipples <Timothy.Sipples@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Improve FSBR-off timingAlan Stern
This patch (as707) improves the FSBR operation in uhci-hcd by turning it off more quickly when it isn't needed. FSBR puts a noticeable load on a computer's PCI bus, so it should be disabled as soon as possible when it isn't in use. The patch leaves it running for only 10 ms after the last URB stops using it, on the theory that this should be long enough for a driver to submit another URB if it wants keep FSBR going. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: remove hc_inaccessible flagAlan Stern
This patch (as706) removes the private hc_inaccessible flag from uhci-hcd. It's not needed because it conveys exactly the same information as the generic HCD_FLAG_HW_ACCESSIBLE bit. In its place goes a new flag recording whether the controller is dead. The new code allows a complete device reset to resurrect a dead controller (although usbcore doesn't yet implement such a facility). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: various updatesDavid Brownell
This patch (as705) contains a small set of updates for uhci-hcd written mostly by Dave Brownell: * Root hub suspend messages come out labeled as root hub messages; PCI messages should only come out when the pci device suspends. * Rename the reset() method to better match its init() role * Behave more like the other HCDs by returning -ESHUTDOWN for root-hub suspend/resume errors. * When an URB fails, associate the message with the usb device not the host controller (it still hides endpoint and direction) From: David Brownell <david-b@pacbell.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] usb-storage: unusual_devs entry for Nikon DSC D70sAlan Stern
This patch (as704) adds an unusual_devs entry for the Nikon DSC D70s, which uses a different Product ID from the D70. It also moves the entry for the DSC E2000 up in the list, to preserve the numerical ordering. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: Add Apple MacBook product IDs to usbhidRene Rebe
This adds the Apple MacBook product IDs for the Fn translation to the usbhid. Signed-off-by: Rene Rebe <rene@exactcode.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: EHCI on non-Au1200 build fixRalf Baechle
Including ehci-au1xxx.c on a non-Au1200 Alchemy only to have it throw an error is stupid. From: Ralf Baechle <ralf@linux-mips.org> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: free allocated memory on io_edgeport startup memory failureChris Lund
While an Edgeport is allocating individual port structures, if kmalloc returns NULL, the serial structure is freed and -ENOMEM, but the ports allocated before the failure are not freed. This patch addresses that condition. Signed-off-by: Christopher Lund <docmax@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: new devices for the Option driverMatthias Urlichs
This patch extends the "option" driver with a few more devices, some of which are actually connected to USB the "right" way -- as opposed to doing it via PCMCIA and OHCI. Signed-Off-By: Matthias Urlichs <smurf@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] usb: drivers/usb/core/devio.c dereferences a userspace pointerPhilippe Retornaz
See http://bugzilla.kernel.org/show_bug.cgi?id=6617. This function dereference a __user pointer. Signed-off-by: Philippe Retornaz <couriousous@mandriva.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] usbcore: recovery from Set-Configuration failureAlan Stern
This patch (as703) improves the error handling when a Set-Configuration request fails. The old interfaces are all unregistered before the request is sent, and if the request fails then we don't know what config the device is using. So it makes no sense to leave actconfig pointing to the old configuration with its invalid interfaces. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] usbhid: use usb_reset_composite_deviceAlan Stern
This patch (as702) makes usbhid use the new usb_reset_composite_device API. Now HID interfaces can coexist with other interfaces on the same device, and a reset can safely be requested by any of the drivers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] usb-storage: use usb_reset_composite_deviceAlan Stern
This patch (as701) modifies usb-storage to take advantage of the new usb_reset_composite_device() API. Now we will be able to safely request port resets even if other drivers are bound to a mass-storage device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB hub: use usb_reset_composite_deviceAlan Stern
This patch (as700) modifies the hub driver to take advantage of the new usb_reset_composite_device API. The existing code had special-case calls stuck into usb_reset_device, just before and after the reset. With the new version there's no need for special-case stuff; it all happens naturally in the form of pre_reset and post_reset notifications. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] usbcore: port reset for composite devicesAlan Stern
This patch (as699) adds usb_reset_composite_device(), a routine for sending a USB port reset to a device with multiple interfaces owned by different drivers. Drivers are notified about impending and completed resets through two new methods in the usb_driver structure. The patch modifieds the usbfs ioctl code to make it use the new routine instead of usb_reset_device(). Follow-up patches will modify the hub, usb-storage, and usbhid drivers so they can utilize this new API. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: cdc_ether: recognize olympus r1000 (fix regression)David Brownell
Earlier work splitting the "usbnet" driver out into a core plus driver modules was missing a blacklist entry for the Olympus R-1000; it must not use the CDC Ethernet driver, only the "zaurus" support works with it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: negative index in drivers/usb/host/isp116x-hcd.cEric Sesterhenn
From: Eric Sesterhenn <snakebyte@gmx.de> This fixes coverity Bug #390. With the following code ret = ep->branch = balance(isp116x, ep->period, ep->load); if (ret < 0) goto fail; the problem is that ret and balance are of the type int, and ep->branch is u16. so the int balance() returns gets reduced to u16 and then converted to an int again, which removes the sign. Maybe the following little c program can explain it better:
2006-06-21[PATCH] USB: Add Sierra Wireless MC5720 ID to airprime.cJeremy Fitzhardinge
Recognize the Sierra Wireless MC5720. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: Whiteheat: fix firmware spurious errorsStuart MacDonald
Attached patch fixes spurious errors during firmware load. Signed-off-by: Stuart MacDonald <stuartm@connecttech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] Driver for Apple Cinema Displayakpm@osdl.org
This is a driver to control the brightness of an Apple Cinema Display over USB. It updates the local brightness value if the user presses a button on the display. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Oliver Neukum <oliver@neukum.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>