aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2010-05-17s3c2410_udc-2440_dual_packet-workaround.patchmokopatches
This is a patch that seems to make the USB hangs on the S3C2440 go away. At least a good amount of ping torture didn't make them come back so far. The issue is that, if there are several back-to-back packets, sometimes no interrupt is generated for one of them. This seems to be caused by the mysterious dual packet mode, which the USB hardware enters automatically if the endpoint size is half that of the FIFO. (On the 2440, this is the normal situation for bulk data endpoints.) There is also a timing factor in this. I think what happens is that the USB hardware automatically sends an acknowledgement if there is only one packet in the FIFO (the FIFO has space for two). If another packet arrives before the host has retrieved and acknowledged the previous one, no interrupt is generated for that second one. However, there may be an indication. There is one undocumented bit (none of the 244x manuals document it), OUT_CRS1_REG[1], that seems to be set suspiciously often when this condition occurs. There is also CLR_DATA_TOGGLE, OUT_CRS1_REG[7], which may have a function related to this. (The Samsung manual is rather terse on that, as usual.) This needs to be examined further. For now, the patch seems to do the trick. Note that this is not a clean solution by any means, because we might potentially get stuck in that interrupt for quite a while.
2010-05-15Fix the regression created by "set S_DEAD on unlink()..." commitAl Viro
1) i_flags simply doesn't work for mount/unlink race prevention; we may have many links to file and rm on one of those obviously shouldn't prevent bind on top of another later on. To fix it right way we need to mark _dentry_ as unsuitable for mounting upon; new flag (DCACHE_CANT_MOUNT) is protected by d_flags and i_mutex on the inode in question. Set it (with dont_mount(dentry)) in unlink/rmdir/etc., check (with cant_mount(dentry)) in places in namespace.c that used to check for S_DEAD. Setting S_DEAD is still needed in places where we used to set it (for directories getting killed), since we rely on it for readdir/rmdir race prevention. 2) rename()/mount() protection has another bogosity - we unhash the target before we'd checked that it's not a mountpoint. Fixed. 3) ancient bogosity in pivot_root() - we locked i_mutex on the right directory, but checked S_DEAD on the different (and wrong) one. Noticed and fixed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-04-30USB: sl811-hcd: Fix device disconnectMichael Hennerich
A while ago I provided a patch that fixed device detection after device removal (USB: sl811-hcd: Fix device disconnect). Chris Brissette pointed out that the detection/removal counter method to distinguish insert or remove my fail under certain conditions. Latest SL811HS datasheet (Document 38-08008 Rev. *D) indicates that bit 6 (SL11H_INTMASK_RD) of the Interrupt Status Register together with bit 5 (SL11H_INTMASK_INSRMV) can be used to determine whether a device has been inserted or removed. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: ohci-at91: fix power management hangingPatrice Vilchez
A hanging has been detected in ohci-at91 while going in suspend to ram. This is due to asynchronous operations between ohci reset and ohci clocks shutdown. This patch adds the reading of the control register between the reset of the ohci and clocks stop. This "flush the writes" idea was taken from ohci-hcd.c file (ohci_shutdown() function). Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: rename usb_buffer_alloc() and usb_buffer_free()Daniel Mack
For more clearance what the functions actually do, usb_buffer_alloc() is renamed to usb_alloc_coherent() usb_buffer_free() is renamed to usb_free_coherent() They should only be used in code which really needs DMA coherency. [added compatibility macros so we can convert things easier - gregkh] Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Pedro Ribeiro <pedrib@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: ti_usb: fix printk format warningRandy Dunlap
Fix printk format warning in usbserial/ti_usb: drivers/usb/serial/ti_usb_3410_5052.c:1738: warning: format '%d' expects type 'int', but argument 5 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: gadget: s3c-hsotg: Add missing unlockJulia Lawall
In an error handling case the lock is not unlocked. The return is converted to a goto, to share the unlock at the end of the function. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * spin_lock_irqsave (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: fix build on OMAPs if CONFIG_PM_RUNTIME is not setAnand Gadiyar
With patch as1329 (USB: convert to the runtime PM framework), we make USB_SUSPEND depend on PM_RUNTIME instead of CONFIG_PM. Also, CONFIG_USB_OTG selects CONFIG_USB_SUSPEND. If PM_RUNTIME is not enabled, and we try to enable USB_OTG, we will end up with CONFIG_USB_SUSPEND selected. This is due to a known bug with the select statement. This makes the build break on various OMAP configs (which have CONFIG_USB_OTG set by default, but do not yet have CONFIG_PM_RUNTIME enabled). Avoid this by changing the logic for CONFIG_USB_OTG from "select USB_SUSPEND" to "depends on USB_SUSPEND" Signed-off-by: Anand Gadiyar <gadiyar@ti.com> CC: Michal Marek <mmarek@suse.cz> CC: Tony Lindgren <tony@atomide.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: oxu210hp: release spinlock on error pathDan Carpenter
Smatch complained about this missing spinlock. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: serial: option: add cinterion device idGreg Kroah-Hartman
This adds a device id for a Cinterion device. Reported-by: John Race <John.Race@roscom.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: serial: option: ZTEAC8710 Support with Device ID 0xffffMahesh Kuruganti
PATCH TO EXTEND SUPPORT TO AC8710 WITH 0xFFFF Product ID. Signed-off-by: Mahesh Kuruganti <maheshkuruganti@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: serial: pl2303: Hybrid reader Uniform HCR331Simone Contini
I tried a magnetic stripe reader (http://www.kimaldi.com/kimaldi_eng/productos/lectores_de_tarjetas/lectores_tarjeta_chip_y_dni/lector_hibrido_uniform_hcr_331) and I see that it is interfaced with a PL2303. I wrote a patch to use your driver which simply adds the product ID for the device and it seems working fine. From: Simone Contini <s.contini@oltrelinux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: option: add ID for ZTE MF 330Dominik Brodowski
Based on the information provided for by Paweł Drobek, add a second vendor ID and the correct product ID for ZTE MF 330. Reported-by: Paweł Drobek <pawel.drobek@gmail.com> Signed-off: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: xhci: properly set endpoint context fields for periodic eps.Sarah Sharp
For periodic endpoints, we must let the xHCI hardware know the maximum payload an endpoint can transfer in one service interval. The xHCI specification refers to this as the Maximum Endpoint Service Interval Time Payload (Max ESIT Payload). This is used by the hardware for bandwidth management and scheduling of packets. For SuperSpeed endpoints, the maximum is calculated by multiplying the max packet size by the number of bursts and the number of opportunities to transfer within a service interval (the Mult field of the SuperSpeed Endpoint companion descriptor). Devices advertise this in the wBytesPerInterval field of their SuperSpeed Endpoint Companion Descriptor. For high speed devices, this is taken by multiplying the max packet size by the "number of additional transaction opportunities per microframe" (the high bits of the wMaxPacketSize field in the endpoint descriptor). For FS/LS devices, this is just the max packet size. The other thing we must set in the endpoint context is the Average TRB Length. This is supposed to be the average of the total bytes in the transfer descriptor (TD), divided by the number of transfer request blocks (TRBs) it takes to describe the TD. This gives the host controller an indication of whether the driver will be enqueuing a scatter gather list with many entries comprised of small buffers, or one contiguous buffer. It also takes into account the number of extra TRBs you need for every TD. This includes No-op TRBs and Link TRBs used to link ring segments together. Some drivers may choose to chain an Event Data TRB on the end of every TD, thus increasing the average number of TRBs per TD. The Linux xHCI driver does not use Event Data TRBs. In theory, if there was an API to allow drivers to state what their bandwidth requirements are, we could set this field accurately. For now, we set it to the same number as the Max ESIT payload. The Average TRB Length should also be set for bulk and control endpoints, but I have no idea how to guess what it should be. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: xhci: properly set the "Mult" field of the endpoint context.Sarah Sharp
A SuperSpeed interrupt or isochronous endpoint can define the number of "burst transactions" it can handle in a service interval. This is indicated by the "Mult" bits in the bmAttributes of the SuperSpeed Endpoint Companion Descriptor. For example, if it has a max packet size of 1024, a max burst of 11, and a mult of 3, the host may send 33 1024-byte packets in one service interval. We must tell the xHCI host controller the number of multiple service opportunities (mults) the device can handle when the endpoint is installed. We do that by setting the Mult field of the Endpoint Context before a configure endpoint command is sent down. The Mult field is invalid for control or bulk SuperSpeed endpoints. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: OHCI: don't look at the root hub to get the number of portsAlan Stern
This patch (as1371) fixes a small bug in ohci-hcd. The HCD already knows how many ports the controller has; there's no need to go looking at the root hub's usb_device structure to find out. Especially since the root hub's maxchild value is set correctly only while the root hub is bound to the hub driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: don't choose configs with no interfacesAlan Stern
This patch (as1372) fixes a bug in the routine that chooses the default configuration to install when a new USB device is detected. The algorithm is supposed to look for a config whose first interface is for a non-vendor-specific class. But the way it's currently written, it will also accept a config with no interfaces at all, which is not very useful. (Believe it or not, such things do exist.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andrew Victor <avictor.za@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: cdc-acm: add another device quirkRuss Nelson
The Maretron USB100 needs this quirk in order to work properly. Signed-off-by: Russ Nelson <nelson@crynwr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: fix testing the wrong variable in fs_create_by_name()Dan Carpenter
There is a typo here. We should be testing "*dentry" which was just assigned instead of "dentry". This could result in dereferencing an ERR_PTR inside either usbfs_mkdir() or usbfs_create(). Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30usb: Fix tusb6010 for DMA APITony Lindgren
Commit 18eabe2347ae7a11b3db768695913724166dfb0e introduced DMA buffer ownership. Fix tusb6010 accordingly. To compile, also dummy musb_platform_save and restore functions need to be added. Also change the order of musb_read_fifo() to happen after dma_cache_maint to have the DMA operations completed before moving the remaining unaligned bytes with PIO. The DMA access and PIO touch different areas of the FIFO, so this change only makes the code a bit easier to follow. Tested on n810 and g_ether with variable size ping test. The test seems to fail for some ping sizes, but that seems to be a different problem. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: fix musb_init_controller() error cleanup pathSergei Shtylyov
This function forgets to call usb_remove_hcd() or musb_gadget_cleanup() iff sysfs_create_group() fails. [ felipe.balbi@nokia.com : review the entire error path not only when we fail hcd or gadget ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: fix DaVinci glue layer dependencySergei Shtylyov
CONFIG_ARCH_DAVINCI now embraces both the "real" DaVinci and DA8xx/OMAP-L1x -- on which the DaVinci glue layer won't work. Change the Makefile dependency to CONFIG_ARCH_DAVINCI_DMx which corresponds to "real" DaVinci. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: don't call musb_platform_exit() twiceSergei Shtylyov
musb_platform_exit() is called twice from musb_init_controller() iff controller initialization fails. Move the call (and the DevCtl register writes surrounding it) from musb_free() to musb_remove(). Fix mispalced and now incorrect 'goto's in musb_init_controller(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: OMAP: don't call clk_put()Sergei Shtylyov
Remove duplicate/unbalanced call to clk_put() from musb_platform_exit() -- clk_put() gets called from musb_core.c anyway... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: DaVinci: fix musb_platform_init() error cleanup pathSergei Shtylyov
This function forgets to call clk_disable() iff reading the USB module version register returns 0. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: don't prevent disabling clock on driver unloadSergei Shtylyov
Resetting 'musb->clock' to NULL in musb_shutdown() prevents musb_platform_exit() from properly disabling the clock when unloading the driver -- don't do it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: don't touch 'musb->clock' in musb_free()Sergei Shtylyov
Remove duplicate/unbalanced calls to clk_disable()/clk_put() in musb_free(): - clk_disable() is called by musb_platform_exit() just prior to this call; - clk_put() is called by the callers of musb_free() prior to calling it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb: potential use after freeDan Carpenter
We assign "urb->hcpriv = qh;" a few lines down. I'm pretty sure we want it "urb->hcpriv" to be NULL not a freed value. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb: save and restore missing bus control registerAjay Kumar Gupta
Added the missing BUS_CONTROL register in musb save/restore routines. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: Blackfin: don't fake blackfin_interrupt() resultSergei Shtylyov
Commit a5073b52833e4df8e16c93dc4cbb7e0c558c74a2 (musb_gadget: fix unhandled endpoint 0 IRQs) misses this change to blackfin.c: stop faking successful result of blackfin_interrupt() and emitting a debug message on an unhandled interrupt. Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22usb: Increase timeout value for device resetDinh Nguyen
It seems that for USB IP on Freescale MX5x processors, it needs >750 usec for the reset to complete. This change should not hurt any other EHCI hardware. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: put claimed interfaces in the "suspended" stateAlan Stern
This patch (as1370) fixes a bug in the USB runtime power management code. When a driver claims an interface, it doesn't expect to need to call usb_autopm_get_interface() or usb_autopm_put_interface() for runtime PM to work. Runtime PM can be controlled by the driver's primary interface; the additional interfaces it claims shouldn't interfere. As things stand, the claimed interfaces will prevent the device from autosuspending. To fix this problem, the patch sets interfaces to the suspended state when they are claimed. Also, although in theory this shouldn't matter, the patch changes the suspend code so that interfaces are suspended in reverse order from detection and resuming. This is how the PM core works, and we ought to use the same approach. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Debugged-and-tested-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: EHCI: defer reclamation of siTDsAlan Stern
This patch (as1369) fixes a problem in ehci-hcd. Some controllers occasionally run into trouble when the driver reclaims siTDs too quickly. This can happen while streaming audio; it causes the controller to crash. The patch changes siTD reclamation to work the same way as iTD reclamation: Completed siTDs are stored on a list and not reused until at least one frame has passed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Nate Case <ncase@xes-inc.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: fix remote wakeup settings during system sleepAlan Stern
This patch (as1363) changes the way USB remote wakeup is handled during system sleeps. It won't be enabled unless an interface driver specifically needs it. Also, it won't be enabled during the FREEZE or QUIESCE phases of hibernation, when the system doesn't respond to wakeup events anyway. Finally, if the device is already runtime-suspended with remote wakeup enabled, but wakeup is supposed to be disabled for the system sleep, the device gets woken up so that it can be suspended again with the proper wakeup setting. This will fix problems people have reported with certain USB webcams that generate wakeup requests when they shouldn't, and as a result cause system suspends to fail. See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/515109 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Erik Andrén <erik.andren@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: pl2303: add AdLink ND-6530 USB IDsManuel Jander
I read a rumor that the AdLink ND6530 USB RS232, RS422 and RS485 isolated adapter is actually a PL2303 based usb serial adapter. I tried it out, and as far as I can tell it works. Signed-off-by: Manuel Jander <manuel.jander@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: Add id for HP ev2210 a.k.a Sierra MC5725 miniPCI-e Cell Modem.William Lightning
Signed-off-by: William Lightning <kassah@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: OHCI: DA8xx/OMAP-L1x: fix up macro renameSergei Shtylyov
It appears that the DA8xx/OMAP-L1x glue layer went into the kernel uncompilable: commit 1960e693ac12ae5fe518309d6a63a44c93fad9e7 (davinci: da8xx/omapl1: add support for the second sysconfig module) has renamed DA8XX_SYSCFG_* macros to DA8XX_SYSCFG0_* and it's been committed before the glue layer... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: qcaux: add LG Rumor and Sanyo Katana LX device IDsDan Williams
These phones also have the familiar ttyACM0/ttyUSB0 schizophrenia when placed into "Dial-up Networking" mode after connecting a USB cable. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22usb: wusb: don't overflow the Keep Alive IE bufferDavid Vrabel
The Keep Alive IE only has space for WUIE_ELT_MAX (== 4) device addresses. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: ehci: omap: fix kernel panic with rmmodAjay Kumar Gupta
Sets the regulator values to NULL if they are not defined. This is required to fix the kernel panic in exit path when EHCI module is removed on the platforms where EHCI regulator are not set. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: fixed bug in usbsevseg using USB autosuspend incorrectlyHarrison Metzger
This patch fixes a bug with the usbsevseg driver which assumed that USB autosuspend will always be used. Signed-off-by: Harrison Metzger <harrisonmetz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: ti_usb_3410_5052: adding multitech dialup fax/modem devicesAlex Manoussakis
The following patch adds support for Multitech Systems' MT9234MU and MT9234ZBA usb dialup fax modems. It is based on a patch and firmware provided to me by Multitech Systems' support, after I reported to them that my MT9234MU modem was not working with recent linux kernels. Signed-off-by: Alex Manoussakis <alex@juniper.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-05Merge branch 'master' into export-slabhTejun Heo
2010-04-02Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 5965/1: Fix soft lockup in at91 udc driver ARM: 6006/1: ARM: Use the correct NOP size in memmove for Thumb-2 kernel builds ARM: 6005/1: arm: kprobes: fix register corruption with jprobes ARM: 6003/1: removing compilation warning from pl061.h ARM: 6001/1: removing compilation warning comming from clkdev.h ARM: 6000/1: removing compilation warning comming from <asm/irq.h> ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h ARM: 5997/1: ARM: Correct the VFPv3 detection ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4) ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4) ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4) ARM: 5993/1: ARM: Move the outer_cache definitions into a separate file (1/4)
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-29ARM: 5965/1: Fix soft lockup in at91 udc driverHarro Haan
Fix a potential soft lockup in the AT91 UDC driver by ensuring that the UDC clock is enabled inside the interrupt handler. If the UDC clock is not enabled then the UDC registers cannot be written to and the interrupt cannot be cleared or masked. Note that this patch (and other parts of the existing AT91 UDC driver) is potentially racy for preempt-rt kernels, but is okay for mainline. For more info see: http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100203/09cdb3b4/attachment.el http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100203/8443a1e4/attachment.el Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Harro Haan <hrhaan@gmail.com> Tested-by: Remy Bohmer <linux@bohmer.net> Acked-by: Andrew Victor <avictor.za@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-26USB gadget r8a66597-udc.c: duplicated includeAndrea Gelmini
drivers/usb/gadget/r8a66597-udc.c: linux/err.h is included more than once. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty_port,usb-console: Fix usb serial console open/close regression tty: cpm_uart: use resource_size() tty_buffer: Fix distinct type warning hvc_console: Fix race between hvc_close and hvc_remove uartlite: Fix build on sparc. tty: Take a 256 byte padding into account when buffering below sub-page units Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"
2010-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (45 commits) USB: gadget/multi: cdc_do_config: remove redundant check usb: r8a66597-hcd: fix removed from an attached hub USB: xhci: Make endpoint interval debugging clearer. USB: Fix usb_fill_int_urb for SuperSpeed devices USB: cp210x: Remove double usb_control_msg from cp210x_set_config USB: Remove last bit of CONFIG_USB_BERRY_CHARGE USB: gadget: add gadget controller number for s3c-hsotg driver USB: ftdi_sio: Fix locking for change_speed() function USB: g_mass_storage: fixed module name in Kconfig USB: gadget: f_mass_storage::fsg_bind(): fix error handling USB: g_mass_storage: fix section mismatch warnings USB: gadget: fix Blackfin builds after gadget cleansing USB: goku_udc: remove potential null dereference USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is 0xff USB: serial: Fix module name typo for qcaux Kconfig entry. usb: cdc-wdm: Fix deadlock between write and resume usb: cdc-wdm: Fix order in disconnect and fix locking usb: cdc-wdm:Fix loss of data due to autosuspend usb: cdc-wdm: Fix submission of URB after suspension usb: cdc-wdm: Fix race between disconnect and debug messages ...
2010-03-19USB: gadget/multi: cdc_do_config: remove redundant checkPeter Korsgaard
cdc_do_config() had a double ret check after fsg_add(). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>