aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2009-04-01proc tty: switch usb-serial to ->proc_fopsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits) [ARM] 5435/1: fix compile warning in sanity_check_meminfo() [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0 [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins imxfb: Fix TFT mode i.MX21/27: remove ifdef CONFIG_FB_IMX imxfb: add clock support mxc: add arch_reset() function clkdev: add possibility to get a clock based on the device name i.MX1: remove fb support from mach-imx [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined Gemini: Add support for Teltonika RUT100 Gemini: gpiolib based GPIO support v2 MAINTAINERS: add myself as Gemini architecture maintainer ARM: Add Gemini architecture v3 [ARM] OMAP: Fix compile for omap2_init_common_hw() MAINTAINERS: Add myself as Faraday ARM core variant maintainer ARM: Add support for FA526 v2 [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h [ARM] collie: fix two minor formatting nits ...
2009-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (119 commits) [SCSI] scsi_dh_rdac: Retry for NOT_READY check condition [SCSI] mpt2sas: make global symbols unique [SCSI] sd: Make revalidate less chatty [SCSI] sd: Try READ CAPACITY 16 first for SBC-2 devices [SCSI] sd: Refactor sd_read_capacity() [SCSI] mpt2sas v00.100.11.15 [SCSI] mpt2sas: add MPT2SAS_MINOR(221) to miscdevice.h [SCSI] ch: Add scsi type modalias [SCSI] 3w-9xxx: add power management support [SCSI] bsg: add linux/types.h include to bsg.h [SCSI] cxgb3i: fix function descriptions [SCSI] libiscsi: fix possbile null ptr session command cleanup [SCSI] iscsi class: remove host no argument from session creation callout [SCSI] libiscsi: pass session failure a session struct [SCSI] iscsi lib: remove qdepth param from iscsi host allocation [SCSI] iscsi lib: have lib create work queue for transmitting IO [SCSI] iscsi class: fix lock dep warning on logout [SCSI] libiscsi: don't cap queue depth in iscsi modules [SCSI] iscsi_tcp: replace scsi_debug/tcp_debug logging with iscsi conn logging [SCSI] libiscsi_tcp: replace tcp_debug/scsi_debug logging with session/conn logging ...
2009-03-28Merge branch 'origin' into develRussell King
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-26Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds
* 'bkl-removal' of git://git.lwn.net/linux-2.6: Rationalize fasync return values Move FASYNC bit handling to f_op->fasync() Use f_lock to protect f_flags Rename struct file->f_ep_lock
2009-03-26Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/net/wimax/i2400m/usb-notif.c
2009-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (97 commits) USB: qcserial: add device id for HP devices USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c USB: allow malformed LANGID descriptors USB: pxa27x_udc: typo fixes and code cleanups USB: gadget: gadget zero uses new suspend/resume hooks USB: gadget: composite device-level suspend/resume hooks USB: r8a66597-hcd: suspend/resume support USB: more u32 conversion after transfer_buffer_length and actual_length USB: Fix cp2101 USB serial device driver termios functions for console use USB: CP2101 New Device ID USB: ipaq: handle 4 endpoint devices USB: S3C: Move usb-control.h to platform include USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue USB: pedantic: spelling correction in comment for ch9.h USB: host: fix sparse warning: Using plain integer as NULL pointer USB: ohci-s3c2410: fix name of bus clock USB: ohci-s3c2410: remove <mach/hardware.h> include USB: serial: rename cp2101 driver to cp210x USB: CP2101 Reduce Error Logging USB: CP2101 Support AN205 baud rates ...
2009-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits) Dynamic debug: fix pr_fmt() build error Dynamic debug: allow simple quoting of words dynamic debug: update docs dynamic debug: combine dprintk and dynamic printk sysfs: fix some bin_vm_ops errors kobject: don't block for each kobject_uevent sysfs: only allow one scheduled removal callback per kobj Driver core: Fix device_move() vs. dpm list ordering, v2 Driver core: some cleanup on drivers/base/sys.c Driver core: implement uevent suppress in kobject vcs: hook sysfs devices into object lifetime instead of "binding" driver core: fix passing platform_data driver core: move platform_data into platform_device sysfs: don't block indefinitely for unmapped files. driver core: move knode_bus into private structure driver core: move knode_driver into private structure driver core: move klist_children into private structure driver core: create a private portion of struct device driver core: remove polling for driver_probe_done(v5) sysfs: reference sysfs_dirent from sysfs inodes ... Fixed conflicts in drivers/sh/maple/maple.c manually
2009-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (96 commits) sh: add support for SMSC Polaris platform sh: fix the HD64461 level-triggered interrupts handling sh: sh-rtc wakeup support sh: sh-rtc invalid time rework sh: sh-rtc carry interrupt rework sh: disallow kexec virtual entry sh: kexec jump: fix for ftrace. sh: kexec: Drop SR.BL bit toggling. sh: add kexec jump support sh: rework kexec segment code sh: simplify kexec vbr code sh: Flush only the needed range when unmapping a VMA. sh: Update debugfs ASID dumping for 16-bit ASID support. sh: tlb-pteaex: Kill off legacy PTEA updates. sh: Support for extended ASIDs on PTEAEX-capable SH-X3 cores. sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp sh: espt-giga board support sh: dma: Make G2 DMA configurable. sh: dma: Make PVR2 DMA configurable. sh: Move IRQ multi definition of DMAC to defconfig ...
2009-03-25Merge branch 'for-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2009-03-24USB: FHCI: use dev_name() in place of bus_id.Sachin Sant
Replace references to bus_id with dev_name() to fix fhci driver build break. drivers/usb/host/fhci-hcd.c:586: error: struct device has no member named bus_id drivers/usb/host/fhci-hcd.c:653: error: struct device has no member named bus_id drivers/usb/host/fhci-dbg.c:111: error: struct device has no member named bus_id Signed-off-by: Sachin Sant <sachinp@in.ibm.com> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24usb: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-24USB: qcserial: add device id for HP devicesAlexander Shumakovitch
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.cCatalin Marinas
The data read from the SKIPMAP registers is not immediately available after writing and the driver panics when a packet is enqueued from the interrupt handler. This patch adds an ndelay(195) before these registers are read (delay value mentioned in section 15.1.1.3 of the ISP1760 data sheet). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: allow malformed LANGID descriptorsDaniel Mack
When an USB hardware does not provide a valid LANGID, fall back to value zero which is still a reasonable default for most devices. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: pxa27x_udc: typo fixes and code cleanupsVernon Sauder
This patch is a merge of patches : - fix function doc and debug - cleanup loop count - optimize code to remove local variable and extra check - init 'req' before use - add missing iounmap call [dbrownell@users.sourceforge.net: capitalize IN/OUT directions in doc] Signed-off-by: Vernon Sauder <vsauder@inhand.com> [folded by Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: gadget: gadget zero uses new suspend/resume hooksDavid Brownell
Use the new device-level suspend/resume hooks for Gadget Zero; always enable them with the OTG test mode; and support remote wakeup on both configurations even in non-OTG mode. This ensures that both configurations can pass the USBCV remote wakeup tests when the OTG test mode is enabled. This changes behavior by adding autoresume support to the loopback config even in non-OTG mode; the test failure was that it didn't work in OTG mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: gadget: composite device-level suspend/resume hooksDavid Brownell
Address one open question in the composite gadget framework: Yes, we should have device-level suspend/resume callbacks in addition to the function-level ones. We have at least one scenario (with gadget zero in OTG test mode) that's awkward to handle without it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: r8a66597-hcd: suspend/resume supportYoshihiro Shimoda
Fix the problem that system cannot suspend. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: more u32 conversion after transfer_buffer_length and actual_lengthRoel Kluin
transfer_buffer_length and actual_length have become unsigned, therefore some additional conversion of local variables, function arguments and print specifications is desired. A test for a negative urb->transfer_buffer_length became obsolete; instead we ensure that it does not exceed INT_MAX. Also, urb->actual_length is always less than urb->transfer_buffer_length. rh_string() does no longer return -EPIPE in the case of an unsupported ID. Instead its only caller, rh_call_control() does the check. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: Fix cp2101 USB serial device driver termios functions for console useVomLehn
This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: CP2101 New Device IDAlex Stephens
One new device ID for CP2101 driver. Signed-off-by: Alex Stephens alex@miranova.com
2009-03-24USB: ipaq: handle 4 endpoint devicesMark Ellis
The ipaq driver currently enforces one port on all devices. This is correct for 2 and 3 endpoint devices, but with 4 endpoint devices meaningful communication occurs on the second pair. This patch allows 2 ports for 4 endpoint devices. Signed-off-by: Mark Ellis <mark@mpellis.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: S3C: Move usb-control.h to platform includeBen Dooks
The usb-control.h is needed by ohci-s3c2410.c for both S3C24XX and S3C64XX architectures, so move it to <plat/usb-control.h> Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glueBen Dooks
The ohci-s3c2410.c glue supports both CONFIG_ARCH_S3C2410 and CONFIG_ARCH_S3C64XX so add it to the build of ohci-s3c2410.c Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: host: fix sparse warning: Using plain integer as NULL pointerHannes Eder
Fix this sparse warning:  drivers/usb/host/oxu210hp-hcd.c:2687:42: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: ohci-s3c2410: fix name of bus clockBen Dooks
The USB bus clock is usb-bus-host, so print the correct name in the dev_err() statement if we cannot find it. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Acked-by: David Brownell <dbrownell@users.sourceforge.net>
2009-03-24USB: ohci-s3c2410: remove <mach/hardware.h> includeBen Dooks
Remove the include of <mach/hardware.h>, as no definitions from it are used by the OHCI driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: serial: rename cp2101 driver to cp210xGreg Kroah-Hartman
Lots of users are getting confused about the cp2101 driver. It really does support more than just the cp2101 device, so rename it to cp210x to try to prevent confusion. Cc: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: CP2101 Reduce Error LoggingCraig Shelley
This patch lowers the logging priority of certain messages to prevent users from flooding the log files. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: CP2101 Support AN205 baud ratesCraig Shelley
This patch adds support for the extended range of baud rates supported by CP2102 and CP2103 devices described in SiLabs AN205. An additional function cp2101_quantise_baudrate rounds the baud rate as per AN205 Table 1. A modification to the baud rate calculation removes a rounding error, allowing the full range of baud rates to be used. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: use kzfree()Johannes Weiner
Use kzfree() instead of memset() + kfree(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: usbfs: remove unneeded "inline" annotationsAlan Stern
This patch (as1223) removes a bunch of unnecessary "inline" annotations from the usbfs driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: don't send Set-Interface after resetAlan Stern
This patch (as1221) changes the way usbcore reinitializes a device following a reset or a reset-resume. Currently we call usb_set_interface() for every interface in the active configuration; this is to put the interface into the same altsetting as before the reset and to make sure that the host's endpoint state matches the device's endpoint state. However, sending a Set-Interface request is a waste of time if an interface was already in altsetting 0 before the reset, since it is certainly in altsetting 0 afterward. In addition, many devices can't handle Set-Interface requests -- they crash when they receive them. So instead, the patch adds code to check each interface. If the interface wasn't in altsetting 0 before the reset, we go head with the Set-Interface request as before. But if it was then we skip sending the Set-Interface request, and we clear out the host-side endpoint state by calling usb_disable_interface() followed by usb_enable_interface(). The patch also adds a couple of new comments to explain what's going on. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: remove phidget drivers from kernel tree.Greg Kroah-Hartman
These devices are better controlled with the LGPL userspace library found at: http://www.phidgets.com/downloads.php?os_id=3 and full documentation at: http://www.phidgets.com/documentation/web/cdoc/index.html Cc: Chester Fitchett <fitchett@phidgets.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: make actual_length in struct urb field u32Greg Kroah-Hartman
actual_length should also be a u32 and not a signed value. This patch changes this field to be 'u32' to prevent any potential negative conversion and comparison errors. This triggered a few compiler warning messages when these fields were being used with the min macro, so they have also been fixed up in this patch. Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: make transfer_buffer_lengths in struct urb field u32Greg Kroah-Hartman
Roel Kluin pointed out that transfer_buffer_lengths in struct urb was declared as an 'int'. This patch changes this field to be 'u32' to prevent any potential negative conversion and comparison errors. This triggered a few compiler warning messages when these fields were being used with the min macro, so they have also been fixed up in this patch. Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: uhci: don't use pseudo negative valuesAlan Stern
The code in uhci-q.c doesn't have to use pseudo-negative values. I did it that way because it was easy and because it would give the expected output during debugging. But it doesn't have to work that way. Here's another approach. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: TWL: disable VUSB regulators when cable unpluggedJouni Hogander
This patch disables USB regulators VUSB1V5, VUSB1V8, and VUSB3V1 when the USB cable is unplugged to reduce power consumption. Added a depencency from twl4030 usb driver to TWL_REGULATOR. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: usbmon: Add binary API v1Pete Zaitcev
This patch adds an extension to the binary API so it reaches parity with existing text API (so-called "1u"). The extension delivers additional data, such as ISO descriptors and the interrupt interval. Signed-Off-By: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: ch341 serial: fix port number changed after resumeMing Lei
This patch fixes the following bug: .plug ch341 usb serial port into a hub port; .ch341 driver bound to the device and /dev/ttyUSB0 comes .open /dev/ttyUSB0 by minicom and we can use the serial successfully .suspend the ch341 usb serial device(such as: echo suspend > power/level) .resume the ch341 usb serial device (such as: echo on > power/level) .new port /dev/ttyUSB1 comes ,and the original /dev/ttyUSB0 still exists, but is no longer usable by minicom The patch adds suspend and resume callback to ch341 usb driver to prevent it from unbinding during suspend. The /dev/ttyUSB0 is not released until being closed, so /dev/ttyUSB1 comes after resume, and the original /dev/ttyUSB0 is no longer usable by minicom. It is really a mess for a minicom user. This patch also adds the reset_resume callback to make it usable after resuming from STR or hibernation, for generally STR or hibernation will make the vbus of root-hub lost. Finally enable the driver's supports_autosuspend, for the device is in working order with it. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: musb: partial DaVinci dm355 supportDavid Brownell
Partial support for DaVinci DM355, on the EVM board; peripheral mode should work, once mainline merges DM355 support. Missing: (a) renumbering the GPIO for DRVVBUS on the DM6446 EVM, when DAVINCI_N_GPIO increases; (b) disabling DM355_DEEPSLEEP.DRVVBUS_OVERRIDE so VBUS is driven according to the ID signal, if cpu_is_..._dm355() The new PHY control bits are ignored on DM6446. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: musb: only turn off vbus in OTG hostsAjay Kumar Gupta
Except on DaVinci, VBUS is now switched off as part of idling the USB link (after a_wait_bcon) whenever a device is disconnected from host. This is correct for OTG hosts, where either SRP or an ID interrupt could turn VBUS on again. However, for non-OTG hosts there's no way to turn VBUS on again, so the host becomes unusable. And the procfs entry which once allowed a manual workaround for this is now gone. This patch adds an is_otg_enabled() check before scheduling the switch-off timer in disconnect path, supporting a "classic host" mode where SRP is unavailable. [ dbrownell@users.sourceforge.net: tweak patch description ] Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: musb: fix init oops crash with static FIFO configGiuseppe GORGOGLIONE
Correct musb_read_fifosize() and musb_configure_ep0() functions for the #ifndef BLACKFIN branch when the silicon uses static FIFO configuration. (Most current silicon configures this controller to use dynamic FIFO configuration; some parts from ST don't, like the STM STA2062.) Signed-off-by: Giuseppe GORGOGLIONE <giuseppe.gorgoglione@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: musb: NAK timeout scheme on bulk RX endpointAjay Kumar Gupta
Fixes endpoint starvation issue when more than one bulk QH is multiplexed on the reserved bulk RX endpoint, which is normal for cases like serial and ethernet adapters. This patch sets the NAK timeout interval for such QHs, and when a timeout triggers the next QH will be scheduled. (This resembles the bulk scheduling done in hardware by EHCI, OHCI, and UHCI.) This scheme doesn't work for devices which are connected to a high to full speed tree (transaction translator) as there is no NAK timeout interrupt from the musb controller from such devices. Tested with PIO, Inventra DMA, CPPI DMA. [ dbrownell@users.sourceforge.net: fold in start_urb() update; clarify only for bulk RX; don't accidentally clear WZC bits ] Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: musb: rewrite host periodic endpoint allocationSergei Shtylyov
The current MUSB host code doesn't make use of all the available FIFOs in for periodic transfers since it wrongly assumes the RX and TX sides of any given hw_ep always share one FIFO. Change: use 'in_qh' and 'out_qh' fields of the 'struct musb_hw_ep' to check the endpoint's business; get rid of the now-unused 'periodic' array in the 'struct musb'. Also optimize a loop induction variable in the endpoint lookup code. (Based on a previous patch from Ajay Kumar Gupta <ajay.gupta@ti.com>) [ dbrownell@users.sourceforge.net: clarify description and origin of this fix; whitespace ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: composite: avoid inconsistent lock stateFelipe Balbi
Avoid the following INFO from lock debugging: [ 369.126112] ================================= [ 369.132063] [ INFO: inconsistent lock state ] [ 369.136457] 2.6.28-maemo1 #1 [ 369.139387] --------------------------------- [ 369.143782] inconsistent {hardirq-on-W} -> {in-hardirq-W} usage. [ 369.149855] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 369.154890] (&cdev->lock){+-..}, at: [<bf1979f0>] composite_disconnect+0x1c/0] [ 369.163404] {hardirq-on-W} state was registered at: [ 369.168348] [<c00788a8>] __lock_acquire+0x5d0/0x7d8 [ 369.173506] [<c0078b14>] lock_acquire+0x64/0x78 [ 369.178266] [<c0263a34>] _spin_lock+0x4c/0x80 [ 369.182905] [<bf19597c>] usb_function_deactivate+0x20/0x70 [g_nokia] [ 369.189527] [<bf1a0a88>] 0xbf1a0a88 [ 369.193281] [<bf19f450>] 0xbf19f450 [ 369.197004] [<bf19fa3c>] 0xbf19fa3c [ 369.200758] [<bf1a03a0>] 0xbf1a03a0 [ 369.204481] [<bf19f254>] 0xbf19f254 [ 369.208204] [<bf1a0158>] 0xbf1a0158 [ 369.211927] [<bf1a130c>] 0xbf1a130c [ 369.215650] [<c01c21f0>] usb_gadget_register_driver+0x12c/0x28c [ 369.221846] [<bf1a06bc>] 0xbf1a06bc [ 369.225569] [<bf1a06e8>] 0xbf1a06e8 [ 369.229322] [<c002c2dc>] __exception_text_end+0x64/0x19c [ 369.234877] [<c0081628>] sys_init_module+0x9c/0x194 [ 369.240004] [<c002c8e0>] ret_fast_syscall+0x0/0x2c [ 369.245039] [<ffffffff>] 0xffffffff [ 369.248793] irq event stamp: 218356 [ 369.252302] hardirqs last enabled at (218355): [<c003a77c>] omap3_enter_idle+8 [ 369.260420] hardirqs last disabled at (218356): [<c0264774>] __irq_svc+0x34/0x0 [ 369.267927] softirqs last enabled at (218348): [<c00585a4>] __do_softirq+0x134 [ 369.275892] softirqs last disabled at (218335): [<c005899c>] irq_exit+0x60/0xb0 [ 369.283308] [ 369.283308] other info that might help us debug this: [ 369.289930] no locks held by swapper/0. Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: allow libusb to talk to unauthenticated WUSB devicesDavid Vrabel
To permit a userspace application to associate with WUSB devices using numeric association, control transfers to unauthenticated WUSB devices must be allowed. This requires that wusbcore correctly sets the device state to UNAUTHENTICATED, DEFAULT and ADDRESS and that control transfers can be performed to UNAUTHENTICATED devices. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: usb-storage: added missing MODULE_LICENSE("GPL") for usb-storage ums-* ↵Maciej Grela
modules The lack of a MODULE_LICENSE macro in ums-* subdrivers prevented them from loading. Needs to be applied after Alan Stern's usb-storage subdriver separation patchset. Also added missing MODULE_DESCRIPTION and MODULE_AUTHOR entries. Signed-off-by: Maciej Grela <maciej.grela@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24usb-storage: make onetouch a separate moduleAlan Stern
This patch (as1217) converts usb-storage's onetouch subdriver into a separate module. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>