aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2005-10-28[PATCH] gfp_t: drivers/usbAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] USB: fix bug in handling of highspeed usb HID devicesChristian Krause
During the development of an USB device I found a bug in the handling of Highspeed HID devices in the kernel. What happened? Highspeed HID devices are correctly recognized and enumerated by the kernel. But even if usbhid kernel module is loaded, no HID reports are received by the kernel. The output of the hardware USB analyzer told me that the host doesn't even poll for interrupt IN transfers (even the "interrupt in" USB transfer are polled by the host). After some debugging in hid-core.c I've found the reason. In case of a highspeed device, the endpoint interval is re-calculated in driver/usb/input/hid-core.c: line 1669: /* handle potential highspeed HID correctly */ interval = endpoint->bInterval; if (dev->speed == USB_SPEED_HIGH) interval = 1 << (interval - 1); Basically this calculation is correct (refer to USB 2.0 spec, 9.6.6). This new calculated value of "interval" is used as input for usb_fill_int_urb: line 1685: usb_fill_int_urb(hid->urbin, dev, pipe, hid->inbuf, 0, hid_irq_in, hid, interval); Unfortunately the same calculation as above is done a second time in usb_fill_int_urb in the file include/linux/usb.h: line 933: if (dev->speed == USB_SPEED_HIGH) urb->interval = 1 << (interval - 1); else urb->interval = interval; This means, that if the endpoint descriptor (of a high speed device) specifies e.g. bInterval = 7, the urb->interval gets the value: hid-core.c: interval = 1 << (7-1) = 0x40 = 64 urb->interval = 1 << (interval -1) = 1 << (63) = integer overflow Because of this the value of urb->interval is sometimes negative and is rejected in core/urb.c: line 353: /* too small? */ if (urb->interval <= 0) return -EINVAL; The conclusion is, that the recalculaton of the interval (which is necessary for highspeed) should not be made twice, because this is simply wrong. ;-) Re-calculation in usb_fill_int_urb makes more sense, because it is the most general approach. So it would make sense to remove it from hid-core.c. Because in hid-core.c the interval variable is only used for calling usb_fill_int_urb, it is no problem to remove the highspeed re-calculation in this file. Signed-off-by: Christian Krause <chkr@plauener.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] isp116x-hcd: fix handling of short transfersOlav Kongas
Increased use of scatter-gather by usb-storage driver after 2.6.13 has exposed a buggy codepath in isp116x-hcd, which was probably never visited before: bug happened only for those urbs, for which URB_SHORT_NOT_OK was set AND short transfer occurred. The fix attached was tested in 2 ways: (a) it fixed failing initialization of a flash drive with an embedded hub; (b) the fix was tested with 'usbtest' against a modified g_zero driver (on top of net2280), which generated short bulk IN transfers of various lengths including multiples and non-multiples of max_packet_length. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] usbserial: Regression in USB generic serial driverRandall Nortman
Kernel version 2.6.13 introduced a regression in the generic USB serial converter driver (usbserial.o, drivers/usb/serial/generic.c). The bug manifests, as far as I can tell, whenever you attempt to write to the device -- the write will never complete (write() returns 0, or blocks). Signed-off-by: Randall Nortman <oss@wonderclown.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10Use the new "kill_proc_info_as_uid()" for USB disconnect tooLinus Torvalds
All the same issues - we can't just save the pointer to the thread, we must save the pid/uid/euid combination. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10[PATCH] Fix signal sending in usbdevio on async URB completionHarald Welte
If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30[PATCH] usb/core/hcd-pci.c: don't free_irq() on suspendDaniel Ritz
the free_irq() in USB suspend breaks resume on some setups where USB (ohci/ehci) shares the interrupt with an other device. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-09-29[PATCH] proc_mkdir() should be used to create procfs directoriesAl Viro
A bunch of create_proc_dir_entry() calls creating directories had crept in since the last sweep; converted to proc_mkdir(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29[ARM] Don't include mach-types.h unnecessarilyRussell King
It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-29[ARM] Don't include asm/arch/hardware.h directlyRussell King
Since asm/hardware.h's only reason for existing is to include asm/arch/hardware.h, it's completely pointless to include both. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-22[PATCH] USB: Add Novatel CDMA Wireless PC card IDs to airprimeDavid Hollis
USB: Add device id's for Novatel Wireless CDMA wireless PC card. The Novatel CDMA card behaves the same as the AirPrime by providing a USB serial port. Signed-off-by: David Hollis <dhollis@davehollis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] usb/serial/option.c: Increase input buffer sizeMatthias Urlichs
The card sometimes sends >2000 bytes in one single chunk. Ouch. Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] USB: fix pegasus driverKevin Vigor
Addresses some small bugs in the pegasus ethernet-over-USB driver. Specifically, malformed long packets from the adapter could cause a kernel panic; the interrupt interval calculation was inappropriate for high-speed devices; the return code from read_mii_word was tested incorrectly; and failure to unlink outstanding URBs before freeing them could lead to kernel panics when unloading the driver. Signed-off-by: Kevin Vigor <kevin@realmsys.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] USB: sl811-hcd minor fixesDavid Brownell
Three minor sl811-hcd fixes: - Elminate memory leak on one (rare) disable/shutdown path. - For periodic transfers that don't need to be scheduled, update urb->start_frame to represent the transfer phase correctly. - Report the (single) port as removable, by default. Since no drivers yet use start_frame or that part of the hub descriptor, only that leak is likely to ever matter. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org> drivers/usb/host/sl811-hcd.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
2005-09-22[PATCH] USB: fix pxa2xx_udc compile warningsRichard Purdie
This patch fixes several types in the PXA25x udc driver and hence fixes several compiler warnings. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] USB: ftdi_sio: allow baud rate to be changed without raising RTS and DTRPeter Favrholdt
I'm using a 2 port USB RS232 dongle to connect to a serial-IR cradle for a bar code reader). Detecting the baudrate of the serial-IR involves keeping DTR low while changing baudrate. This works using normal 16550A serial ports as well as the FTDI driver version 1.4.0 (Linux 2.6.8) but stopped working with the change to "ensure RTS and DTR are raised when changing baudrate" introduced in version 1.4.1 (Linux 2.6.9). The attached patch fixes this, so RTS and DTR is only raised when changing baudrate iff the previous baudrate was B0. Signed-off-by: Peter Favrholdt <pfavr@how.dk> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] USB: more device IDs for Option card driverMatthias Urlichs
Added support for HUAWEI E600 and Audiovox AirCard User reports say that these devices work without driver modification. Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] driver core: add helper device_is_registered()Daniel Ritz
add the helper and use it instead of open coding the klist_node_attached() check (which is a layering violation IMHO) idea by Alan Stern. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] USB: ftdi_sio: custom baud rate fixIan Abbott
ftdi_sio: I messed up the baud_base for custom baud rate support in 2.6.13. The attached one-liner patch fixes it. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: Usbmon setup DMA patchPete Zaitcev
Alan Stern sent me this patch. It goes on top of the patch the adds mon_dmapeek: http://ftp.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-04-usb/usb-usbmon-dma-areas.patch Please be warned about ordering requirements or the build may fail. Actually, mon_dmapeek is generic enough to support SETUP packets too. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] usb: fix uss720 schedule with interrupts offThomas Sailer
This patch fixes the long standing schedule with interrupts off problem of the uss720 driver. The problem is caused by the parport layer calling the save and restore methods within a write_lock_irqsave guarded region. The fix is to issue the control transaction requests required by save and restore asynchronously. Signed-off-by: Thomas Sailer, <sailer@ife.ee.ethz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: usb-storage: Add unusual_devs entry for Neuros Audio MP3 playerDaniel Drake
Alan Stern wrote: > If the device sometimes reports the correct values, then you should > include NEED_OVERRIDE flag to prevent messages about unnecessary > overrides showing up in the system log. Also, if bInterfaceSubclass > is correct and only bInterfaceProtocol is wrong, then the entry should > say US_SC_DEVICE instead of US_SC_SCSI. Fair points, thanks. When connected over USB2, this device reports a nonsense bInterfaceProtocol value 6 and doesn't work with usb-storage. When connected over USB1, the device reports the correct bInterfaceProtocol value 0x50 (bulk) and works with no problems. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: storage: Add unusual_dev SINGLE_LUN entriesPhil Dibowitz
This patch adds entries for several USB floppies that need the US_FL_SINGLE_LUN flag. These were reported by Sebastian Kapfer <sebastian_kapfer@gmx.net> and Olaf Hering <olh@suse.de>, with rediffing and cleaning from me. Reported-by: Sebastian Kapfer <sebastian_kapfer@gmx.net> Reported-by: Olaf Hering <olh@suse.de> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB Storage: unusual_devs.h request for TranscendPete Zaitcev
The stick replies to the door lock commands with a check condition (e.g. FAIL status in a normal bulk CSW), but the subsequent REQUEST SENSE returns all-zero sense. The situation is documented in our Bugzilla, including usbmon traces. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=162559 The error is purely cosmetic, data integrity is not in danger. But I thought we might as well do it. It looks nicer that way. I discussed this with Phil and he told me to submit directly. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: storage: Fix messed-up lockingMatthew Dharm
This is patch as550 from Alan Stern. Apparently someone changed the SCSI core so that it no longer holds the host lock when doing a device or bus reset. usb-storage was updated at the time, but the change was done carelessly. Some of the code depends on that lock being held. This patch reintroduces the host lock where needed and tries to clarify the comments explaining why the lock is necessary. It also moves the code that clears the TIMED_OUT and ABORTING bitflags so that it executes as soon as the timed-out command has completed (and while the host lock is held). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: relax usbcore reset timingsDavid Brownell
This appears to help some folk, please merge. This patch relaxes reset timings. There are some reports that it helps make enumeration work better on some high speed devices. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: PL2303: CA-42 Phone cableRobert Spanton
This patch adds the product ID and vendor ID for a Nokia CA-42 USB cable to the list of devices handled by the pl2303 driver. The patch is against 2.6.13. Signed-off-by: Robert Spanton <rds204@zepler.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: OHCI, pxa27x OHCI port power tweaksDavid Brownell
Now that it's in use on other boards, a bug in the original code needs fixing. There is no need for the PXA27x OHCI to set usb power during init, since the hub driver in usbcore handles that. Those platform-specific power control functions are also incorrect, and should therefore be removed. Add a check to clear the OTG pin hold bit until such times OTG is properly implemented. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: OHCI relies less on NDP registerDavid Brownell
Some OHCI implementations have differences in the way the NDP register (in roothub_a) reports the number of ports present. This patch allows the platform specific code to optionally supply the number of ports. The driver just reads the value at init (if not supplied) instead of reading it every time its needed (except for an AMD756 bug workaround). It also sets the value correctly for the ARM pxa27x architecture. Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: OHCI irq tweakDavid Brownell
Evidently there are some boards which care a lot about this, but as a rule it's been hard to notice. OHCI_INTR_RD wasn't always cleared in the ohci irq handler. On some systems this means certain remote wakeup scenarios could seem to hang (in an interrupt storm, RD never clearing). From: "William Morrow" <William.Morrow@amd.com> Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB gadgetfs: fixes an error on writing to endpoint filePavol Kurina
this patch fixes an "Invalid argument" error returned by a write to an endpoint-file after reopening it in the gadgetfs module in the kernel 2.6.12. This was testet only with dummy_hcd module! Signed-off-by: Pavol Kurina <kurina@gmx.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2005-09-12[PATCH] drivers/usb: fix-up schedule_timeout() usageNishanth Aravamudan
Description: Use schedule_timeout_{,un}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: get rid of minor log spammingDavid Brownell
Routine cases like handoff-to-companion shouldn't trigger diagnostics. This gets rid of some recently added log spamming. It's routine for hub_port_wait_reset() to return -ENOTCONN to indicate handoff from highspeed hubs to companions, so an error message is incorrect. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: EHCI workaround for NForce and mem > 2GBDavid Brownell
NVidia reports (via Mark Overby) that some of their EHCI controllers don't like certain data structure addresses beyond the 2GB mark. He provided an earlier version of this patch. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: EHCI port tweaksDavid Brownell
One change may improve some S1 or S3 resume cases, and the other seems mostly to explain some strange state "lsusb" would show. Two fixes: - On resume, don't think about resuming any unpowered port, or resetting any port with OWNER set to the OHCI/UHCI companion. This will make some S1 and S3 resume scenarios work better. - PORT_CSC was not being cleared correctly in ehci_hub_status_data. This was visible at least through current versions of "lsusb", and might have caused some other hub related strangeness. The fix addresses all three write-to-clear bits, using the same approach that UHCI happens to use: a mask of bits that are cleared in most writes to that port status register. Original patch seems to have been from from William.Morrow@amd.com and this version (from David) finishes the write-to-clear changes. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: CP2101 New Device IDsCraig Shelley
Three new device IDs for CP2101 USB to UART Bridge Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB UHCI: remove the FSBR kernel timerAlan Stern
This patch (as558) removes from the UHCI driver a kernel timer used for checking Full Speed Bandwidth Reclamation (FSBR). The checking can be done during normal root-hub polling; it doesn't need a separate timer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] usbcore: small changes to HCD glue layerAlan Stern
This patch (as549) introduces two small changes in the HCD glue layer. The first simply removes a redundant test. The second allows root-hub polling to continue for a single iteration after a host controller dies; this is needed for the patch that follows. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: add apple usb touchpad driverStelian Pop
This is a driver for the USB touchpad which can be found on post-February 2005 Apple PowerBooks. This driver is derived from Johannes Berg's appletrackpad driver [1], but it has been improved in some areas: * appletouch is a full kernel driver, no userspace program is necessary * appletouch can be interfaced with the synaptics X11 driver[2], in order to have touchpad acceleration, scrolling, two/three finger tap, etc. This driver has been tested by the readers of the 'debian-powerpc' mailing list for a few weeks now and I believe it is now ready for inclusion into the mainline kernel. Credits go to Johannes Berg for reverse-engineering the touchpad protocol, Frank Arnold for further improvements, and Alex Harper for some additional information about the inner workings of the touchpad sensors. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12[PATCH] USB: sisusb[vga] updateThomas Winischhofer
here is a new and extended version of the sisusbvga (previously: sisusb) driver. The patch is against 2.6.13 and updates the driver to version 0.0.8. Additions include complete VGA/EGA text console support and a build-in display mode infrastructure for userland applications that don't know about the graphics internals. Fixes include some BE/LE issues and a get/put_dev bug in the previous version. Other changes include a change of the module name from "sisusb" to "sisusbvga". The previous one was too generic IMHO. Please note that the patch also affects the Makefile in drivers/video/console as the driver requires the VGA 8x16 font in case the text console part is selected. Heavily tested, as usual. Please apply. One thing though: I already prepared for removal of the "mode" field and the changed "name" field in the usb_class_driver structure. This will perhaps need some refinement depending on whether you/Linus merge the respective core changes before or after 2.6.14. Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12Revert "[PATCH] USB: Prevent hid-core claiming Apple Bluetooth device on new ↵Greg KH
G4 powerbooks" This reverts 22af8878d2d641c6b15fe39fe4de3c05b2c477f0 commit. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-10Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input Linus Torvalds
2005-09-10[PATCH] vfree and kfree cleanup in drivers/Jesper Juhl
This patch does a full cleanup of 'NULL checks before vfree', and a partial cleanup of calls to kfree for all of drivers/ - the kfree bit is partial in that I only did the files that also had vfree calls in them. The patch also gets rid of some redundant (void *) casts of pointers being passed to [vk]free, and a some tiny whitespace corrections also crept in. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09Manual merge with LinusDmitry Torokhov
2005-09-09[PATCH] timer initialization cleanup: DEFINE_TIMERIngo Molnar
Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 Linus Torvalds
2005-09-08[PATCH] USB: yealink: fix htons usage, documentation updatesHenk
Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] USB: fix endian issues in yealink driver.Greg Kroah-Hartman
sparse still complains about the htons usage, but I'll leave that for others to fix. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] input-driver-yealink-P1K-usb-phoneHenk
This patch aggregates all modifications in the -mm tree and adds complete ringtone support. The following features are supported: - keyboard full support - LCD full support - LED full support - dialtone full support - ringtone full support - audio playback via generic usb audio diver - audio record via generic usb audio diver For driver documentation see: Documentation/input/yealink.txt For vendor documentation see: http://yealink.com Signed-off-by: Henk <Henk.Vergonet@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>